We installed two sets of Astronomical Site Monitoring System(ASMS) at Lijiang Observatory(GMG), for the running of the 2.4-meter Lijiang optical telescope(LJT) and the 1.6-meter Multi-channel Photometric Survey Telescope (Mephisto). The Mephistro is under construction. ASMS has been running on robotic mode since 2017. The core instruments: Cloud Sensor, All-Sky Camera and Autonomous-DIMM that are developed by our group, together with the commercial Meteorological Station and Sky Quality Meter, are combined into the astronomical optical site monitoring system. The new Cloud Sensor's Cloud-Clear Relationship is presented for the first time, which is used to calculate the All-Sky cloud cover. We designed the Autonomous-DIMM located on a tower, with the same height as LJT. The seeing data have been observed for a full year. ASMS's data for the year 2019 are also analysed in detail, which are valuable to observers.

Sulfur gases significantly affect the photochemistry of planetary atmospheres in our Solar System, and are expected to be important components in exoplanet atmospheres. However, sulfur photochemistry in the context of exoplanets is poorly understood due to a lack of chemical-kinetics information for sulfur species under relevant conditions. Here, we study the photochemical role of hydrogen sulfide (H2S) in warm CO2-rich exoplanet atmospheres (800 K) by carrying out laboratory simulations. We find that H2S plays a significant role in photochemistry, even when present in the atmosphere at relatively low concentrations (1.6%). It participates in both gas and solid phase chemistry, leading to the formation of other sulfur gas products (CH3SH/SO, C2H4S/OCS, SO2/S2, and CS2) and to an increase in solid haze particle production and compositional complexity. Our study shows that we may expect thicker haze with small particle sizes (20 to 140 nm) for warm CO2-rich exoplanet atmospheres that possess H2S.

Galaxy mergers and interactions are expected to play a significant role leading to offsets between gas and stellar motions in galaxies. Herein we crossmatch galaxies in MaNGA MPL-8 with the Dark Energy Spectroscopic Instrument (DESI) Legacy Surveys and identify 538 galaxies with merging/interacting features to investigate their position angle offsets ($\Delta$PA) between gas and stellar rotation. We find that there is a much higher merging/interacting fraction in misaligned galaxies (30$^\circ$ $\leqslant$ $\Delta$PA $<$150$^\circ$) than that in co-rotators ($\Delta$PA $<$ 30$^\circ$). This result corroborates that merging/interacting is one of the sources to produce misaligned galaxies and recent merging events can contribute to maximum 40\% of such misalignment. Furthermore, the marginal merging/interacting fraction in star-forming (SF) counter-rotators ($\Delta$PA $\geqslant$ 150$^\circ$) indicates the minor role of merging in the origin of SF counter-rotators. In addition, the slightly smaller merging/interacting fraction in non star-forming (non-SF) counter-rotators (0.14$\pm$0.039) than that in non-SF misaligned galaxies (0.22$\pm$0.031) agrees with that counter-rotating is a stable state, where tidal features disappear. Finally, the ratio of co-rotators to counter-rotators in non-SF merging/interacting galaxies is about 8:1, much larger than the prediction from the isotropic merging (1:1), which supports the speculation that gas and stars prefer to be aligned during merging, as the orbital angular momentum transfers to gas and stellar spin.

Sand electrification is important for aeolian sediment transportation on terrestrial bodies with silicate sand as the main sediment composition. However, it has not been thoroughly studied for icy bodies such as Titan with organic sand as the main dune-forming material. We used the colloidal probe atomic force microscopy (AFM) technique to study triboelectric charging processes using Titan and Earth sand analogs. We found that it is easy to generate triboelectric charges between naphthalene (a simple aromatic hydrocarbon), polystyrene (an aromatic hydrocarbon polymer), and borosilicate glass (Earth silicate sand analog). Strong electrostatic forces can be measured after contact and/or tribocharging. In contrast, tholin, a complex organic material, does not generate any detectable electrostatic forces with contact or tribocharging within the detection limit of the instrument. If Titan sand behaves more like tholin, this indicates that the tribocharging capacity of Titan sand is much weaker than Earth silicate sand and much less than previously measured by Mendez-Harper et al., (2017), where only simple organics were used for Titan sand analogs. Thus, triboelectrification may not contribute to increasing interparticle forces between sand particles on Titan as much as on Earth. Interparticle forces generated by other electrostatic processes or other interparticle forces such as van der Waals and capillary cohesion forces could be the dominant interparticle forces that govern Titan sand formation and sediment transportation on the surface. Titan sand is also unlikely to produce large electrical discharge through tribocharging to affect future missions to Titan's surface.

We developed a spectroscopic monitoring project to investigate the kinematics of the broad-line region (BLR) in active galactic nuclei (AGN) with ultra-fast outflows (UFOs). Mrk~79 is a radio-quiet AGN with UFOs and warm absorbers, had been monitored by three reverberation mapping (RM) campaigns, but its BLR kinematics is not understood yet. In this paper, we report the results from a new RM-campaign of Mrk~79, which was undertaken by Lijiang 2.4-m telescope. Mrk~79 is seeming to come out the faint state, the mean flux approximates a magnitude fainter than historical record. We successfully measured the lags of the broad emission lines including H$\beta~\lambda4861$, H$\gamma~\lambda4340$, He II $\lambda4686$ and He I $\lambda5876$ with respect to the varying AGN continuum. Based on the broad H$\beta~\lambda4861$ line, we measured black hole (BH) mass of $M_{\bullet}=5.13^{+1.57}_{-1.55}\times10^{7}M_{\odot}$, estimated accretion rates of ${\dot{M}_{\bullet}}=(0.05\pm0.02)~L_{\rm Edd}~c^{-2}$, indicating that Mrk~79 is a sub-Eddington accretor. We found that Mrk~79 deviates from the canonical Radius$-$Luminosity relationship. The marginal blueshift of the broad He II $\lambda4686$ line detected from rms spectrum indicates outflow of high-ionization gas. The velocity-resolved lag profiles of the broad H$\gamma~\lambda4340$, H$\beta~\lambda4861$, and He I $\lambda5876$ lines show similar signatures that the largest lag occurs in the red wing of the lines then the lag decreases to both sides. These signatures should suggest that the BLR of Keplerian motion probably exists the outflow gas motion. All findings including UFOs, warm absorbers, and the kinematics of high- and low-ionization BLR, may provide an indirect evidence that the BLR of Mrk~79 probably originates from disk wind.

Using the integral field unit (IFU) data from Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey, we study the kinematics of gas and stellar components in an edge-on Seyfert 2 galaxy, SDSS J171359.00+333625.5, with X-shaped bi-conical outflows. The gas and stars therein are found to be counter-rotating, indicating that the collision between the inner and external gas might be an effective way to dissipate the angular momentum, which leads to remarkable gas accretion into the galaxy center. Large [OIII]$\lambda$5007 equivalent width and AGN-like line ratio in the large bi-conical region suggest that the gas is ionized by the central AGN. The gas velocity in the bi-cone region shows that ionized gas is receding relative to the galaxy center, which could be the joint effect of inflows, outflows and disk rotation. We are probably witnessing the case where a great amount of gas in the disk is being efficiently accreted into the central black hole, and the AGN-driven galactic winds are blown out along the bi-cone. The kinematics of oxygen, including rotation velocity and velocity dispersion, is different from other elements, like hydrogen, nitrogen and sulfur. The rotation velocity estimated from oxygen is slower than from other elements. The velocity dispersion of other elements follows galactic gravitational potential, while the velocity dispersion of oxygen stays roughly constant along the galactic major-axis. The further advanced observations, e.g. of cold gas or with an IFU of higher spatial resolution, are required to better understand this object.

In this work, we revisit the size-luminosity relation of the extended narrow line regions (ENLRs) using a large sample of nearby active galactic nuclei (AGN) from the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey. The ENLRs ionized by the AGN are identified through the spatially resolved BPT diagram, which results in a sample of 152 AGN. By combining our AGN with the literature high-luminosity quasars, we found a tight log-linear relation between the size of the ENLR and the AGN [O III]{\lambda}5007{\AA} luminosity over four orders of magnitude of the [O III] luminosity. The slope of this relation is 0.42 $\pm$ 0.02 which can be explained in terms of a distribution of clouds photoionized by the AGN. This relation also indicates the AGN have the potential to ionize and heat the gas clouds at a large distance from the nuclei without the aids of outflows and jets for the low-luminosity Seyferts.

We report two-dimensional spectroscopic analysis of massive red spiral galaxies ($M_{*}$ $>$ 10$^{10.5}$ $M_{\odot}$) and compare them to blue spiral and red elliptical galaxies above the same mass limit based on the public SDSS DR15 MaNGA observations. We find that the stellar population properties of red spiral galaxies are more similar to those of elliptical galaxies than to blue spiral galaxies. Red spiral galaxies show a shallow mass-weighted age profile, and they have higher stellar metallicity and Mgb/${\rm \langle Fe \rangle}$ across the whole 1.5$R_{\rm e}$ as compared to blue spirals, but all these properties are close to those of elliptical galaxies. One scenario to explain this is that red spirals form as remnants of very gas-rich major mergers that happened above $z$$\sim$1.

The Five-hundred-meter Aperture Spherical radio Telescope(FAST) was launched on September 25,2016.From early 2017,we began to use the FAST wideband receiver,which was designed,constructed and installed on the FAST in Guizhou,China.The front end of the receiver is composed an uncooled Quad Ridge Flared Horn feed(QRFH) with the frequency range of 270 to 1620 MHz,and a cryostat operating at 10 K.Stephen et al. 2016We have coop-erated with the Institute of Automation of the Chinese Academy of Sciences to developed the China Reconfigurable ANalog-digital backEnd.The system covers the 3 GHz operating band of FAST.The hardware part of the backend includes an Analog Front-end Board,a wideband high precision Analog Digital Converter,and a FAST Digital Back-end.Analog circuit boards, field programmable gate arrays, and control computers form a set of hardware, software, and firmware platforms to achieve flexible bandwidth requirements through parameter changes. It is also suitable for the versatility of different astronomical observations, and can meet specific requirements. This paper briefly introduces the hardware and software of CRANE, as well as some observations of the system.

Lijiang 2.4-meter Telescope(LJT), the largest common-purpose optical telescope in China, has been applied to the world-wide astronomers since 2008. It is located at Gaomeigu site, Lijiang Observatory(LJO), the southwest of China. The site has very good observational conditions. Since 10-year operation, several instruments have been equipped on the LJT. Astronomers can perform both photometric and spectral observations. The main scientific goals of LJT include photometric and spectral evolution of supernova, reverberation mapping of active galactic nucleus, physical properties of binary star and near-earth object(comet and asteroid), identification of exoplanet, and all kinds of transients. Until now, the masses of 41 high accretion rate black holes have been measured, and more than 168 supernova have been identified by the LJT. More than 190 papers related to the LJT have been published. In this paper, the general observation condition of the Gaomeigu site is introduced at first. Then, the LJT structure is described in detail, including the optical, mechanical, motion and control system. The specification of all the instruments, and some detailed parameters of the YFOSC is also presented. Finally, some important scientific results and future expectations are summarized.

We analyze the intrinsic velocity dispersion properties of 648 star-forming galaxies observed by the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey, to explore the relation of intrinsic gas velocity dispersions with star formation rates (SFRs), SFR surface densities ($\rm{\Sigma_{SFR}}$), stellar masses and stellar mass surface densities ($\rm{\Sigma_{*}}$). By combining with high z galaxies, we found that there is a good correlation between the velocity dispersion and the SFR as well as $\rm{\Sigma_{SFR}}$. But the correlation between the velocity dispersion and the stellar mass as well as $\rm{\Sigma_{*}}$ is moderate. By comparing our results with predictions of theoretical models, we found that the energy feedback from star formation processes alone and the gravitational instability alone can not fully explain simultaneously the observed velocity-dispersion/SFR and velocity-dispersion/$\rm{\Sigma_{SFR}}$ relationships.

The Commensal Radio Astronomy Five-hundred-meter Aperture Spherical radio Telescope (FAST) Survey (CRAFTS) utilizes the novel drift-scan commensal survey mode of FAST and can generate billions of pulsar candidate signals. The human experts are not likely to thoroughly examine these signals, and various machine sorting methods are used to aid the classification of the FAST candidates. In this study, we propose a new ensemble classification system for pulsar candidates. This system denotes the further development of the pulsar image-based classification system (PICS), which was used in the Arecibo Telescope pulsar survey, and has been retrained and customized for the FAST drift-scan survey. In this study, we designed a residual network model comprising 15 layers to replace the convolutional neural networks (CNNs) in PICS. The results of this study demonstrate that the new model can sort >96% of real pulsars to belong the top 1% of all candidates and classify >1.6 million candidates per day using a dual--GPU and 24--core computer. This increased speed and efficiency can help to facilitate real-time or quasi-real-time processing of the pulsar-search data stream obtained from CRAFTS. In addition, we have published the labeled FAST data used in this study online, which can aid in the development of new deep learning techniques for performing pulsar searches.

Information about the physical properties of astrophysical objects cannot be measured directly but is inferred by interpreting spectroscopic observations in the context of atomic physics calculations. Ratios of emission lines, for example, can be used to infer the electron density of the emitting plasma. Similarly, the relative intensities of emission lines formed over a wide range of temperatures yield information on the temperature structure. A critical component of this analysis is understanding how uncertainties in the underlying atomic physics propagates to the uncertainties in the inferred plasma parameters. At present, however, atomic physics databases do not include uncertainties on the atomic parameters and there is no established methodology for using them even if they did. In this paper we develop simple models for the uncertainties in the collision strengths and decay rates for Fe XIII and apply them to the interpretation of density sensitive lines observed with the EUV Imagining spectrometer (EIS) on Hinode. We incorporate these uncertainties in a Bayesian framework. We consider both a pragmatic Bayesian method where the atomic physics information is unaffected by the observed data, and a fully Bayesian method where the data can be used to probe the physics. The former generally increases the uncertainty in the inferred density by about a factor of 5 compared with models that incorporate only statistical uncertainties. The latter reduces the uncertainties on the inferred densities, but identifies areas of possible systematic problems with either the atomic physics or the observed intensities.

Early-type galaxies (ETGs) are composed of two distinct populations: high-mass and low-mass, which are likely to be built via gas-poor merging and gas-rich merging/accretion, respectively. However, it is difficult to directly associate low-mass ETGs with gas-rich processes, because currently they are gas poor with no signs of ongoing star formation. We report a discovery of an ETG (SDSS J142055.01+400715.7) with Mstellar=10^10 Msun that offers direct evidence for gas-rich merging as the origin of low-mass ETGs. The integrated properties of the galaxy are consistent with a typical low-mass ETG, but the outer and inner regions show distinct dispersion- and rotation-dominated kinematics, respectively. There are some tidal features surrounding the galaxy. These two facts suggest very recent galaxy merging. Furthermore, the inner disk harbors on-going star formation, indicating the merging to be gas rich. This type of galaxy is rare but it may be a demonstration of the role the transient phase of gas-rich merging plays in making a low-mass ETG.

Extensive equatorial linear dunes exist on Titan, but the origin of the sand, which appears to be organic, is unknown. We used nanoindentation to study the mechanical properties of a few Titan sand candidates, several natural sands on Earth, and common materials used in the Titan Wind Tunnel, to understand the mobility of Titan sand. We measured the elastic modulus (E), hardness (H), and fracture toughness (Kc) of these materials. Tholin's elastic modulus (10.4+/-0.5 GPa) and hardness (0.53+/-0.03 GPa) are both an order of magnitude smaller than silicate sand, and is also smaller than the mechanically weak white gypsum sand. With a magnitude smaller fracture toughness (Kc=0.036+/-0.007 MPa-m^(1/2)), tholin is also much more brittle than silicate sand. This indicates that Titan sand should be derived close to the equatorial regions where the current dunes are located, because tholin is too soft and brittle to be transported for long distances.

UV radiation can induce photochemical processes in exoplanet atmospheres and produce haze particles. Recent observations suggest that haze and/or cloud layers could be present in the upper atmospheres of exoplanets. Haze particles play an important role in planetary atmospheres and may provide a source of organic material to the surface which may impact the origin or evolution of life. However, very little information is known about photochemical processes in cool, high-metallicity exoplanetary atmospheres. Previously, we investigated haze formation and particle size distribution in laboratory atmosphere simulation experiments using AC plasma as the energy source. Here, we use UV photons to initiate the chemistry rather than the AC plasma, since photochemistry driven by UV radiation is important for understanding exoplanet atmospheres. We present photochemical haze formation in current UV experiments, we investigated a range of atmospheric metallicities (100x, 1000x, and 10000x solar metallicity) at three temperatures (300 K, 400 K, and 600 K). We find that photochemical hazes are generated in all simulated atmospheres with temperature-dependent production rates: the particles produced in each metallicity group decrease as the temperature increases. The images taken with atomic force microscopy show the particle size (15-190 nm) varies with temperature and metallicity. Our laboratory experimental results provide new insight into the formation and properties of photochemical haze, which could guide exoplanet atmosphere modeling and help to analyze and interpret current and future observations of exoplanets.

The optical observations of Ic-4 supernova (SN) 2016coi/ASASSN-16fp, from $\sim 2$ to $\sim450$ days after explosion, are presented along with analysis of its physical properties. The SN shows the broad lines associated with SNe Ic-3/4 but with a key difference. The early spectra display a strong absorption feature at $\sim 5400$ \AA\ which is not seen in other SNe~Ic-3/4 at this epoch. This feature has been attributed to He I in the literature. Spectral modelling of the SN in the early photospheric phase suggests the presence of residual He in a C/O dominated shell. However, the behaviour of the He I lines are unusual when compared with He-rich SNe, showing relatively low velocities and weakening rather than strengthening over time. The SN is found to rise to peak $\sim 16$ d after core-collapse reaching a bolometric luminosity of Lp $\sim 3\times10^{42}$ \ergs. Spectral models, including the nebular epoch, show that the SN ejected $2.5-4$ \msun\ of material, with $\sim 1.5$ \msun\ below 5000 \kms, and with a kinetic energy of $(4.5-7)\times10^{51}$ erg. The explosion synthesised $\sim 0.14$ \msun\ of 56Ni. There are significant uncertainties in E(B-V)host and the distance however, which will affect Lp and MNi. SN 2016coi exploded in a host similar to the Large Magellanic Cloud (LMC) and away from star-forming regions. The properties of the SN and the host-galaxy suggest that the progenitor had $M_\mathrm{ZAMS}$ of $23-28$ \msun\ and was stripped almost entirely down to its C/O core at explosion.

Super-Earths and mini-Neptunes are the most abundant types of planets among the ~3500 confirmed exoplanets, and are expected to exhibit a wide variety of atmospheric compositions. Recent transmission spectra of super-Earths and mini-Neptunes have demonstrated the possibility that exoplanets have haze/cloud layers at high altitudes in their atmospheres. However, the compositions, size distributions, and optical properties of these particles in exoplanet atmospheres are poorly understood. Here, we present the results of experimental laboratory investigations of photochemical haze formation within a range of planetary atmospheric conditions, as well as observations of the color and size of produced haze particles. We find that atmospheric temperature and metallicity strongly affect particle color and size, thus altering the particles' optical properties (e.g., absorptivity, scattering, etc.); on a larger scale, this affects the atmospheric and surface temperature of the exoplanets, and their potential habitability. Our results provide constraints on haze formation and particle properties that can serve as critical inputs for exoplanet atmosphere modeling, and guide future observations of super-Earths and mini-Neptunes with the Transiting Exoplanet Survey Satellite (TESS), the James Webb Space Telescope (JWST), and the Wide-Field Infrared Survey Telescope (WFIRST).

The clumpy disc, or inhomogeneous accretion flow, has been proposed to explain the properties of accreting black hole systems. However, the observational evidences remain to be explored. In this work, we calculate the profiles of Fe K{\alpha} lines emitted from the inhomogeneous accretion flow through the ray-tracing technique, in order to find possible observable signals of the clumps. Compared with the skewed doublepeaked profile of the continuous standard accretion disc, the lines show a multi-peak structure when the emissivity index is not very steep. The peaks and wings are affected by the position and size of the cold clumps. When the clump is small and is located in the innermost region, due to the significant gravitational redshift, the blue wing can overlap with the red wing of the outer cold disc/clump, forming a fake peak or greatly enhancing the red peak. Given high enough resolution, it is easier to constrain the clumps around the supermassive black holes than the clumps in stellar mass black holes due to the thermal Doppler effect.

To understand the origin of the dunes on Titan, it is important to investigate the material properties of Titan's organic sand particles on Titan. The organic sand may behave distinctively compared to the quartz/basaltic sand on terrestrial planets (Earth, Venus, Mars) due to differences in interparticle forces. We measured the surface energy (through contact angle measurements) and elastic modulus (through Atomic Force Microscopy, AFM) of the Titan aerosol analog (tholin). We find the surface energy of a tholin thin film is about 70.9 mN/m and its elastic modulus is about 3.0 GPa (similar to hard polymers like PMMA and polystyrene). For two 20 $\mu$m diameter particles, the theoretical cohesion force is therefore 3.3 $\mu$N. We directly measured interparticle forces for relevant materials: tholin particles are 0.8$\pm$0.6 $\mu$N, while the interparticle cohesion between walnut shell particles (a typical model materials for the Titan Wind Tunnel, TWT) is only 0.4$\pm$0.1 $\mu$N. The interparticle cohesion forces are much larger for tholins and presumably Titan sand particles than materials used in the TWT. This suggests we should increase the interparticle force in both analog experiments (TWT) and threshold models to correctly translate the results to real Titan conditions. The strong cohesion of tholins may also inform us how the small aerosol particles ($\sim$1 $\mu$m) in Titan's atmosphere are transformed into large sand particles ($\sim$200 $\mu$m). It may also support the cohesive sand formation mechanism suggested by Rubin and Hesp (2009), where only unidirectional wind is needed to form linear dunes on Titan.

Saltation threshold, the minimum wind speed for sediment transport, is a fundamental parameter in aeolian processes. The presence of liquid, such as water on Earth or methane on Titan, may affect the threshold values to a great extent. Sediment density is also crucial for determining threshold values. Here we provide quantitative data on density and water content of common wind tunnel materials that have been used to study conditions on Earth, Titan, Mars, and Venus. The measured density values for low density materials are higher compared to literature values, whereas for the high density materials, there is no such discrepancy. We also find that low density materials have much higher water content and longer atmospheric equilibration timescales compared to high density sediments. In the Titan Wind Tunnel, we performed threshold experiments with the standard walnut shells (125-150 \mu m, 7.2% water by mass) and dried walnut shells (1.7% water by mass). The threshold results for the two scenarios are almost the same, which indicates that humidity had a negligible effect on threshold for walnut shells in this experimental regime. When the water content is lower than 11.0%, the interparticle forces are dominated by adsorption forces, whereas at higher values the interparticle forces are dominated by much larger capillary forces. For materials with low equilibrium water content, like quartz sand, capillary forces dominate. When the interparticle forces are dominated by adsorption forces, the threshold does not increase with increasing relative humidity (RH). Only when the interparticle forces are dominated by capillary forces does the threshold start to increase with increasing RH/water content. Since tholins have a low methane content (0.3% at saturation, Curtis et al., 2008), we believe tholins would behave similarly to quartz sand when subjected to methane moisture. [abridged abstract]

The model of inhomogeneous accretion flow, in which cold clumps are surrounded by hot gas or corona, has been proposed to explain the spectral features of black hole X-ray binaries (BHXBs). In this work, we try to find possible observational features in the continuum that can indicate the existence of clumps. The spectra of inhomogeneous accretion flow are calculated via the Monte Carlo method. Since the corresponding accretion flow is unsteady and complex, the accretion flow is described by a set of free parameters, the ranges of which can include the real cases. The influences of the parameters are investigated. It is found that the thermal component of the spectra deviates from the multi-color black body spectra in the middle power-law part. On the one hand, a warp appears due to the gap region between the clumps and the outer cold disk, and on the other hand, the slope of the line connecting the thermal peaks deviates from 4/3. The warp feature, as well as the correlation between the thermal peak at higher frequency and the spectral index, are possible to indicate the existence of clumps, and are worthy of further investigation with more self-consistent models.

We report the observations of an electron vortex magnetic hole corresponding to a new type of coherent structures in the magnetosheath turbulent plasma using the Magnetospheric Multiscale (MMS) mission data. The magnetic hole is characterized by a magnetic depression, a density peak, a total electron temperature increase (with a parallel temperature decrease but a perpendicular temperature increase), and strong currents carried by the electrons. The current has a dip in the center of the magnetic hole and a peak in the outer region of the magnetic hole. The estimated size of the magnetic hole is about 0.23 \r{ho}i (~ 30 \r{ho}e) in the circular cross-section perpendicular to its axis, where \r{ho}i and \r{ho}e are respectively the proton and electron gyroradius. There are no clear enhancement seen in high energy electron fluxes, but an enhancement in the perpendicular electron fluxes at ~ 90{\deg} pitch angles inside the magnetic hole is seen, implying that the electron are trapped within it. The variations of the electron velocity components Vem and Ven suggest that an electron vortex is formed by trapping electrons inside the magnetic hole in the circular cross-section (in the M-N plane). These observations demonstrate the existence of a new type of coherent structures behaving as an electron vortex magnetic hole in turbulent space plasmas as predicted by recent kinetic simulations.

We fit the spectral energy distributions (SEDs) of members of a large sample of Fermi 2LAC blazars to synchrotron and inverse Compton (IC) models. Our main results are as follows. (i) As suggested by previous works, the correlation between peak frequency and curvature can be explained by statistical or stochastic particle acceleration mechanisms. For BL Lacs, we find a linear correlation between synchrotron peak frequency and its curvature. The slope of the correlation is consistent with the stochastic acceleration mechanisms and confirm previous studies. For FSRQs, we also find a linear correlation, but its slope cannot be explained by previous theoretical models. (ii) We find a significant correlation between IC luminosity and synchrotron luminosity. The slope of the correlation of FSRQs is consistent with the EC process. And the slope of the correlation of BL Lac is consistent with the SSC process. (iii) We find several significant correlations between IC curvature and several basic parameters of blazars (black hole mass, broad line luminosity, the Lorentz factor of jet). We also find significant correlations between bolometric luminosity and these basic parameters of blazars which suggest that the origin of jet is a mixture of the mechanisms proposed by Blandford $\&$ Znajek and by Blandford $\&$ Payne.

We study the $\rm{\gamma}$-ray luminosity and beaming effect for Fermi blazars. Our results are as follows. (i) There are significant correlations between $\rm{\gamma}$-ray luminosity and radio core luminosity, and between $\rm{\gamma}$-ray luminosity and $\rm{R_{v}}$, which suggests that the $\rm{\gamma}$-ray emissions have strong beaming effect. (ii) Using the $\rm{L_{ext}/M_{abs}}$ as an indicator of environment effects, we find that there have no significant correlation between $\rm{\gamma}$-ray luminosity and $\rm{L_{ext}/M_{abs}}$ for all sources when remove the effect of redshift. FSRQs considered alone also do not show a significant correlation, while BL Lacs still show a significant correlation when remove the effect of redshift. These results suggest that the $\rm{\gamma}$-ray emission may be affected by environment on the kiloparsec-scale for BL Lacs.

A sample of 111 Fermi blazars each with a well-established radio core luminosity, broad-line luminosity, bolometric luminosity and black hole mass has been compiled from the literatures.We present a significant correlation between radio core and broad-line emission luminosities that supports a close link between accretion processes and relativistic jets. Analysis reveals a relationship of $\rm{LogL_{BLR}\sim(0.81\pm0.06)LogL_{R}^{C}}$ which is consistant with theoretical predicted coefficient and supports that blazar jets are powered by energy extraction from a rapidly spinning Kerr black hole through the magnetic field provided by the accretion disk. Through studying the correlation between the intrinsic bolometric luminosity and the black hole mass, we find a relationship of $\rm{{Log}\frac{L_{in}}{L_{\odot}}=(0.95\pm0.26){Log}\frac{M}{M_{\odot}}+(3.53\pm2.24)}$ which supports mass-luminosity relation for Fermi blazars derived in this work is a powerlaw relation similar to that for main-sequence stars. Finally, evolutionary sequence of blazars is discussed.

We study the relation between accretion, black hole mass and jet power in AGN, by using a large group of blazars detected by the Fermi Large Area Telescope and radio galaxies. Our main results are as follows. (i) The jet power of FSRQs and FRII-HEG depends on the black hole mass, which suggests that the FSRQs and FRII-HEG are in Radiation-Pressure Dominated regime. The jet power of BL Lacs and FRI-LEG depends on the accretion, which suggests that the BL Lacs and FRI-LEG are in the Gas-Pressure Dominated regime. (ii) We find that most of FSRQs and BL Lacs have $\rm{P_{jet}>L_{BZ}^{max}}$, which suggests that the Blandford-Znajek mechanism is insufficient to explain the jet power of these objects. (iii) The FSRQs are roughly separated from BL Lacs by the Ledlow-Owen's dividing line in the $\rm{\log P_{jet}-\log M}$ plane, which supports the unified scheme of AGN. (iv) The FSRQs and BL Lacs have a clear division at $\rm{L_{bol}/L_{Edd}\sim0.01}$, and the distribution of Eddington ratios of BL Lacs and FSRQs exhibits a bimodal nature, which imply that the accretion mode of FSRQs may be different from that of BL Lacs. (v) We find a significant correlation between broad line luminosity and jet power, which supports a direct tight connection between jet power and accretion.

We compiled a sample of 24 flat-spectrum radio quasars (FSRQs), 21 BL Lacs, 13 FRI and 12 FRII radio galaxies to study the jet power and broad-line luminosity relation, and the jet power and black hole mass relation. Furthermore, we obtain the histograms of key parameters. Our main results are as the follows:(i) We found that the FSRQs are roughly separated from BL Lacs by the Ledlow-Owen FRI/FRII dividing line in the $\rm{\log{P_{jet}}-\log{M}}$ plane. This result supports the unification model that BL Lacs unify with FRI radio galaxies and FSRQs unify with FRII radio galaxies.(ii)We found that the coefficient of the best-fit linear regression equation of $\rm{\log{L_{BLR}}-\log{P_{jet}}}$ relation is very close to 1 for our sample. The correlation between broad line luminosity and jet power is significant which supports that jet power has a close link with accretion.

We study the relationship between jet power and accretion for Fermi and non-Fermi blazars, respectively. We also compare the relevant parameter between them. Our main results are as follows. (i) Fermi and non-Fermi blazars have significant difference in redshift, black hole mass, and broad line luminosity. (ii) Fermi blazars have higher average core-dominance parameter than non-Fermi blazars, which suggests that Fermi blazars have strong beaming effect. (iii) We find significant correlation between broad line emission and jet power for Fermi and non-Fermi blazars, respectively, which suggests a direct tight connection between jet and accretion. (iv) The accretion and black hole mass may have a different contribution to jet power for Fermi and non-Fermi blazars, respectively.

We investigate the thermal stability of optically thin, two-temperature, radiative cooling-dominated accretion disks. Our linear analysis shows that the disk is thermally unstable without magnetic fields, which agrees with previous stability analysis on the Shapiro-Lightman-Eardley disk. By taking into account the effects of magnetic fields, however, we find that the disk can be or partly be thermally stable. Our results may be helpful to understand the outflows in optically thin flows. Moreover, such radiative cooling-dominated disks may provide a new explanation of the different behaviors between black hole and neutron star X-ray binaries on the radio/X-ray correlation.

The China Dark Matter Experiment reports results on light WIMP dark matter searches at the China Jinping Underground Laboratory with a germanium detector array with a total mass of 20 g. The physics threshold achieved is 177 eVee ("ee" represents electron equivalent energy) at 50% signal efficiency. With 0.784 kg-days of data, exclusion region on spin-independent coupling with the nucleon is derived, improving over our earlier bounds at WIMP mass less than 4.6 GeV.

We present the effects of the self-gravity on the vertical structure and neutrino luminosity of the neutrino-dominated accretion disks in cylindrical coordinates. It is found that significant changes of the structure appear in the outer region of the disk, especially for high accretion rates (e.g., $\ga 1 M_\odot~\rm s^{-1}$), and thus causes the slight increase of the neutrino luminosity. Furthermore, the gravitational instability of the disk is reviewed by the vertical distribution of the Toomre parameter \citep{Toomre1964}, which may account for the late-time flares in gamma-ray bursts and the extended emission in short-duration gamma-ray bursts.

The China Dark matter Experiment collaboration reports the first experimental limit on WIMP dark matter from 14.6 kg-day of data taken with a 994 g p-type point-contact germanium detector at the China Jinping underground Laboratory where the rock overburden is more than 2400 m. The energy threshold achieved was 400 eVee. According to the 14.6 kg-day live data, we placed the limit of N= 1.75 * 10^{-40} cm^{2} at 90% confidence level on the spin-independent cross-section at WIMP mass of 7 GeV before differentiating bulk signals from the surface backgrounds.

We demonstrate how observations of pulsars can be used to help navigate a spacecraft travelling in the solar system. We make use of archival observations of millisecond pulsars from the Parkes radio telescope in order to demonstrate the effectiveness of the method and highlight issues, such as pulsar spin irregularities, which need to be accounted for. We show that observations of four millisecond pulsars every seven days using a realistic X-ray telescope on the spacecraft throughout a journey from Earth to Mars can lead to position determinations better than approx. 20km and velocity measurements with a precision of approx. 0.1m/s.

The CDEX Collaboration has been established for direct detection of light dark matter particles, using ultra-low energy threshold p-type point-contact germanium detectors, in China JinPing underground Laboratory (CJPL). The first 1 kg point-contact germanium detector with a sub-keV energy threshold has been tested in a passive shielding system located in CJPL. The outputs from both the point-contact p+ electrode and the outside n+ electrode make it possible to scan the lower energy range of less than 1 keV and at the same time to detect the higher energy range up to 3 MeV. The outputs from both p+ and n+ electrode may also provide a more powerful method for signal discrimination for dark matter experiment. Some key parameters, including energy resolution, dead time, decay times of internal X-rays, and system stability, have been tested and measured. The results show that the 1 kg point-contact germanium detector, together with its shielding system and electronics, can run smoothly with good performances. This detector system will be deployed for dark matter search experiments.

Properties of proton resonances in $^{18}$Ne have been investigated efficiently by utilizing a technique of proton resonant elastic scattering with a $^{17}$F radioactive ion (RI) beam and a thick proton target. A 4.22~MeV/nucleon $^{17}$F RI beam was produced via a projectile-fragmentation reaction, and subsequently separated by a Radioactive Ion Beam Line in Lanzhou ({\tt RIBLL}). Energy spectra of the recoiled protons were measured by two sets of $\Delta$E-E silicon telescope at center-of-mass scattering angles of $\theta_{c.m.}$$\approx$175${^\circ}$$\pm$5${^\circ}$, $\theta_{c.m.}$$\approx$152${^\circ}$$\pm$8${^\circ}$, respectively. Several proton resonances in $^{18}$Ne were observed, and their resonant parameters have been determined by an $R$-matrix analysis of the differential cross sections in combination with the previous results. The resonant parameters are related to the reaction-rate calculation of the stellar $^{14}$O($\alpha$,$p$)$^{17}$F reaction, which was thought to be the breakout reaction from the hot CNO cycles into the $rp$-process in x-ray bursters. Here, $J^\pi$=(3$^-$, 2$^-$) are tentatively assigned to the 6.15-MeV state which was thought the key 1$^-$ state previously. In addition, a doublet structure at 7.05 MeV are tentatively identified, and its contribution to the resonant reaction rate of $^{14}$O($\alpha$,$p$)$^{17}$F could be enhanced by at least factors of about 4$\sim$6 in comparison with the previous estimation involving only a singlet. The present calculated resonant rates are much larger than those previous values, and it may imply that this breakout reaction could play a crucial role under x-ray bursters conditions.

The reaction rates of the key stellar reaction of $^{14}$O($\alpha$,p)$^{17}$F have been reexamined. The previous conclusion, the 6.15-MeV state ($J^{\pi}$=1$^-$) dominating this reaction rate, has been overthrown by a careful reanalysis of the previous experimental data [J. G\'{o}mez del Campo {\it et al.}, Phys. Rev. Lett. {\bf 86}, 43 (2001)]. According to the present $R$-matrix analysis, the previous 1$^-$ assignment for the 6.15-MeV state is definitely wrong. Most probably, the 6.286-MeV state is the 1$^-$ state and the 6.15-MeV state is a 3$^-$ one, and hence the resonance at $E_x$=6.286 MeV ($J^{\pi}$=1$^-$) dominates the reaction rates in the temperature region of astrophysical interests. The newly calculated reaction rates for the $^{14}$O($\alpha$,p)$^{17}$F reaction are quite different from the previous ones, for instance, it's only about 1/6 of the previous value around 0.4 GK, while it's about 2.4 times larger than the previous value around 2 GK. The astrophysical implications have been discussed based on the present conclusions.