Normalized to: Yoshioka, K.
[1]
oai:arXiv.org:2003.13240 [pdf] - 2119919
Demonstration of wideband metal mesh filters for submillimeter
astrophysics using flexible printed circuits
Submitted: 2020-03-30
We developed a wideband quasi-optical band-pass filter covering 170-520 GHz
by exploiting the recent advancements in commercially available flexible
printed circuit (FPC) fabrication technologies. We designed and fabricated a
three-layered stack of loaded hexagonal grid metal meshes using a copper
pattern with a narrowest linewidth of $50~\mu\mathrm{m}$ on a polyimide
substrate. The measured frequency pass-band shape was successfully reproduced
through a numerical simulation using a set of parameters consistent with the
dimensions of the fabricated metal meshes. FPC-based metal mesh filters will
provide a new pathway toward the on-demand development of
millimeter/submillimeter-wave quasi-optical filters at low cost and with a
short turnaround time.
[2]
oai:arXiv.org:1904.03480 [pdf] - 1863180
The Western Bulge of 162173 Ryugu Formed as a Result of a Rotationally
Driven Deformation Process
Hirabayashi, Masatoshi;
Tatsumi, Eri;
Miyamoto, Hideaki;
Komatsu, Goro;
Sugita, Seiji;
Watanabe, Sei-ichiro;
Scheeres, Daniel J.;
Barnouin, Olivier S.;
Michel, Patrick;
Honda, Chikatoshi;
Michikami, Tatsuhiro;
Cho, Yuichiro;
Morota, Tomokatsu;
Hirata, Naru;
Hirata, Naoyuki;
Sakatani, Naoya;
Schwartz, Stephen R.;
Honda, Rie;
Yokota, Yasuhiro;
Kameda, Shingo;
Suzuki, Hidehiko;
Kouyama, Toru;
Hayakawa, Masahiko;
Matsuoka, Moe;
Yoshioka, Kazuo;
Ogawa, Kazunori;
Sawada, Hirotaka;
Yoshikawa, Makoto;
Tsuda, Yuichi
Submitted: 2019-04-06
162173 Ryugu, the target of Hayabusa2, has a round shape with an equatorial
ridge, which is known as a spinning top-shape. A strong centrifugal force is a
likely contributor to Ryugu's top-shaped features. Observations by Optical
Navigation Camera onboard Hayabusa2 show a unique longitudinal variation in
geomorphology; the western side of this asteroid, later called the western
bulge, has a smooth surface and a sharp equatorial ridge, compared to the other
side. Here, we propose a structural deformation process that generated the
western bulge. Applying the mission-derived shape model, we employ a finite
element model technique to analyze the locations that experience structural
failure within the present shape. Assuming that materials are uniformly
distributed, our model shows the longitudinal variation in structurally failed
regions when the spin period is shorter than ~3.75 h. Ryugu is structurally
intact in the subsurface region of the western bulge while other regions are
sensitive to structural failure. We infer that this variation is indicative of
the deformation process that occurred in the past, and the western bulge is
more relaxed structurally than the other region. Our analysis also shows that
this deformation process might occur at a spin period between ~3.5 h and ~3.0
h, providing the cohesive strength ranging between ~4 Pa and ~10 Pa.
[3]
oai:arXiv.org:1810.11065 [pdf] - 1846826
Updated Inflight Calibration of Hayabusa2's Optical Navigation Camera
(ONC) for Scientific Observations during the Cruise Phase
Tatsumi, Eri;
Kouyama, Toru;
Suzuki, Hidehiko;
Yamada, Manabu;
Sakatani, Naoya;
Kameda, Shingo;
Yokota, Yasuhiro;
Honda, Rie;
Morota, Tomokatsu;
Moroi, Keiichi;
Tanabe, Naoya;
Kamiyoshihara, Hiroaki;
Ishida, Marika;
Yoshioka, Kazuo;
Sato, Hiroyuki;
Honda, Chikatoshi;
Hayakawa, Masahiko;
Kitazato, Kohei;
Sawada, Hirotaka;
Sugita, Seiji
Submitted: 2018-10-25
The Optical Navigation Camera (ONC-T, ONC-W1, ONC-W2) onboard Hayabusa2 are
also being used for scientific observations of the mission target, C-complex
asteroid 162173 Ryugu. Science observations and analyses require rigorous
instrument calibration. In order to meet this requirement, we have conducted
extensive inflight observations during the 3.5 years of cruise after the launch
of Hayabusa2 on 3 December 2014. In addition to the first inflight calibrations
by Suzuki et al. (2018), we conducted an additional series of calibrations,
including read-out smear, electronic-interference noise, bias, dark current,
hot pixels, sensitivity, linearity, flat-field, and stray light measurements
for the ONC. Moreover, the calibrations, especially flat-fields and
sensitivities, of ONC-W1 and -W2 are updated for the analysis of the
low-altitude (i.e., high-resolution) observations, such as the gravity
measurement, touchdowns, and the descents for MASCOT and MINERVA-II payload
releases. The radiometric calibration for ONC-T is also updated in this study
based on star and Moon observations. Our updated inflight sensitivity
measurements suggest the accuracy of the absolute radiometric calibration
contains less than 1.8% error for the ul-, b-, v-, Na-, w-, and x-bands based
on star calibration observations and ~5% for the p-band based on lunar
calibration observations. The radiance spectra of the Moon, Jupiter, and Saturn
from the ONC-T show good agreement with the spacecraft-based observations of
the Moon from SP/SELENE and WAC/LROC and with ground-based telescopic
observations for Jupiter and Saturn.
[4]
oai:arXiv.org:1006.1688 [pdf] - 903205
Deep Correlation Between Cosmic-Ray Anomaly and Neutrino Masses
Submitted: 2010-06-08, last modified: 2010-09-03
The positron anomaly recently reported by the cosmic-ray measurements
suggests that, if explained by the decay of dark matter particle, the decay
source is closely linked up with the leptonic sector of the standard model. It
is observed that, with a simple dimensional analysis, the lifetime of dark
matter for the anomaly is expressed by the energy scale of neutrino masses. We
present two scenarios in which these two matter at issue (the dark matter width
and the tiny neutrino masses) stem from a single operator involving a
gauge-singlet scalar field.
[5]
oai:arXiv.org:1008.4777 [pdf] - 285844
Universally Leptophilic Dark Matter From Non-Abelian Discrete Symmetry
Submitted: 2010-08-27
The positron anomaly recently reported by the cosmic-ray measurements can be
explained by the decaying dark matter scenario, where it decays mainly into
leptons with the lifetime of O(10^26) second. When the dark matter is a
fermionic particle, the lifetime of this order is known to be obtained by a
dimension 6 operator suppressed by the unification scale 10^16 GeV, while such
decay operators do not necessarily involve only leptons. In addition, the
scenario would be spoiled if there exist lower-dimensional operators inducing
the dark matter decay. We show in this letter that a single non-Abelian
discrete symmetry such as A_4 is possible to prohibit all such harmful
(non-leptonically coupled and lower-dimensional) operators. Moreover, the dark
matter decays into charged leptons in a flavor-blind fashion due to the
non-Abelian flavor symmetry, which results in perfect agreements not only with
the PAMELA data but also with the latest Fermi-LAT data reported very recently.
We also discuss some relevance between the discrete symmetry and neutrino
physics.
[6]
oai:arXiv.org:astro-ph/0509239 [pdf] - 1233605
Non-LTE Line-Formation and Abundances of Sulfur and Zinc in F, G, and K
Stars
Submitted: 2005-09-08
Extensive statistical-equilibrium calculations on neutral sulfur and zinc
were carried out, in order to investigate how the non-LTE effect plays a role
in the determination of S and Zn abundances in F, G, and K stars. Having
checked on the spectra of representative F-type stars (Polaris, Procyon, and
alpha Per) and the Sun that our non-LTE corrections yield a reasonable
consistency between the abundances derived from different lines, we tried an
extensive non-LTE reanalysis of published equivalent-width data of S I and Zn I
lines for metal-poor halo/disk stars. According to our calculations, S I
9212/9228/9237 lines suffer significant negative non-LTE corrections amounting
to <~ 0.2--0.3 dex, while LTE is practically valid for S I 8683/8694 lines.
Embarrassingly, as far as the very metal-poor regime is concerned, a marked
discordance is observed between the [S/Fe] values from these two abundance
indicators, in the sense that the former attains a nearly flat plateau (or even
a slight downward bending) while the latter shows an ever-increasing trend with
a further lowering of metallicity. The reason for this discrepancy is yet to be
clarified. Regarding Zn, we almost confirmed the characteristic tendencies of
[Zn/Fe] reported from recent LTE studies (i.e., an evident/slight increase of
[Zn/Fe] with a decrease of [Fe/H] for very metal-poor/disk stars), since the
non-LTE corrections for the Zn I 4722/4810 and 6362 lines (tending to be
positive and gradually increasing towards lower [Fe/H]) are quantitatively of
less significance (<~ 0.1 dex).