sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Taniguchi, Daisuke

Normalized to: Taniguchi, D.

7 article(s) in total. 55 co-authors, from 1 to 7 common article(s). Median position in authors list is 5,0.

[1]  oai:arXiv.org:2003.10641  [pdf] - 2077108
The effect of surface gravity on line-depth ratios in the wavelength range 0.97-1.32 {\mu}m
Comments: 12 pages, 7 figures, accepted for publication in Monthly Notices of the Royal Astronomical Society
Submitted: 2020-03-23, last modified: 2020-04-09
A line-depth ratio (LDR) of two spectral lines with different excitation potentials is expected to be correlated with the effective temperature ($T_\mathrm{eff}$). It is possible to determine $T_\mathrm{eff}$ of a star with a precision of tens of Kelvin if dozens or hundreds of tight LDR-$T_\mathrm{eff}$ relations can be used. Most of the previous studies on the LDR method were limited to optical wavelengths, but Taniguchi and collaborators reported 81 LDR relations in the $YJ$ band, 0.97-1.32 $\mu\mathrm{m}$, in 2018. However, with their sample of only 10 giants, it was impossible to account for the effects of surface gravity and metallicity on the LDRs well. Here we investigate the gravity effect based on $YJ$-band spectra of 63 stars including dwarfs, giants, and supergiants observed with the WINERED spectrograph. We found that some LDR-$T_\mathrm{eff}$ relations show clear offsets between the sequence of dwarfs and those of giants/supergiants. The difference between the ionization potentials of the elements considered in each line pair and the corresponding difference in the depths can, at least partly, explain the dependency of the LDR on the surface gravity. In order to expand the stellar parameter ranges that the LDR method can cover with high precision, we obtained new sets of LDR-$T_\mathrm{eff}$ relations for solar-metal G0-K4 dwarfs and F7-K5 supergiants, respectively. The typical precision that can be achieved with our relations is 10-30 K for both dwarfs and supergiants.
[2]  oai:arXiv.org:1911.11277  [pdf] - 2030633
Identification of Absorption Lines of Heavy Metals in the Wavelength Range 0.97--1.32 Micron
Comments: 19 pages plus 18 pages with additional plots, 5 figures, 3 tables, to be published in the Astrophysical Journal Supplement Series
Submitted: 2019-11-25
Stellar absorption lines of heavy elements can give us various insights into the chemical evolution of the Galaxy and nearby galaxies. Recently developed spectrographs for the near-infrared wavelengths are becoming more and more powerful for producing a large number of high-quality spectra, but identification and characterization of the absorption lines in the infrared range remain to be fulfilled. We searched for lines of the elements heavier than the iron group, i.e., those heavier than Ni, in the Y (9760--11100 AA) and J (11600--13200 AA) bands. We considered the lines in three catalogs, i.e., Vienna Atomic Line Database (VALD), the compilation by R. Kurucz, and the list published in 1999 by Melendez and Barbuy. Candidate lines were selected based on synthetic spectra and the confirmation was done by using WINERED spectra of 13 supergiants and giants within FGK spectral types (spanning 4000--7200 K in the effective temperature). We have detected lines of Zn I, Sr II, Y II, Zr I, Ba II, Sm II, Eu II, and Dy II, in the order of atomic number. Although the number of the lines is small, 23 in total, they are potentially useful diagnostic lines of the Galactic chemical evolution, especially in the regions for which interstellar extinction hampers detailed chemical analyses with spectra in shorter wavelengths. We also report the detection of lines whose presence was not predicted by the synthetic spectra created with the above three line lists.
[3]  oai:arXiv.org:1909.09850  [pdf] - 2025855
Possible progression of mass flow processes around young intermediate-mass stars based on high-resolution near-infrared spectroscopy. I. Taurus
Comments: Accepted for publication in the Astrophysical Journal
Submitted: 2019-09-21
We used the WINERED spectrograph to perform near-infrared high-resolution spectroscopy (resolving power $R = 28$,000) of 13 young intermediate-mass stars in the Taurus star-forming region. Based on the presence of near- and mid-infrared continuum emission, young intermediate-mass stars can be classified into three different evolutionary stages: Phases I, II, and III in the order of evolution. Our obtained spectra ($\lambda = 0.91$--1.35\,$\mu$m) depict \HeI $\lambda$10830 and P$\beta$ lines that are sensitive to magnetospheric accretion and winds. We also investigate five sources each for P$\beta$ and \ion{He}{1} lines that were obtained from previous studies along with our targets. We observe that the P$\beta$ profile morphologies in Phases I and II corresponded to an extensive variety of emission features; however, these features are not detected in Phase III. We also observe that the He I profile morphologies are mostly broad subcontinuum absorption lines in Phase I, narrow subcontinuum absorption lines in Phase II, and centered subcontinuum absorption features in Phase III. Our results indicate that the profile morphologies exhibit a progression of the dominant mass flow processes: stellar wind and probably magnetospheric accretion in the very early stage, magnetospheric accretion and disk wind in the subsequent stage, and no activities in the final stage. These interpretations further suggest that opacity in protoplanetary disks plays an important role in mass flow processes. Results also indicate that \ion{He}{1} absorption features in Phase III sources, associated with chromospheric activities even in such young phases, are characteristics of intermediate-mass stars.
[4]  oai:arXiv.org:1903.02241  [pdf] - 1875353
FeI lines in 0.91-1.33 ${\rm \mu}$m spectra of red giants for measuring the microturbulence and metallicities
Comments: 14 pages, 8 figures, 5 tables, accepted for publication in ApJ
Submitted: 2019-03-06
For a detailed analysis of stellar chemical abundances, high-resolution spectra in the optical have mainly been used, while the development of near-infrared (NIR) spectrograph has opened new wavelength windows. Red giants have a large number of resolved absorption lines in both the optical and NIR wavelengths, but the characteristics of the lines in different wave passbands are not necessarily the same. We present a selection of FeI lines in the $z^{\prime}$, $Y$, and $J$ bands (0.91-1.33 $\mu$m). On the basis of two different lists of lines in this range, the Vienna Atomic Line Database (VALD) and the catalog published by Mel\'endez & Barbuy in 1999 (MB99), we selected sufficiently strong lines that are not severely blended and compiled lists with 107 FeI lines in total (97 and 75 lines from VALD and MB99, respectively). Combining our lists with high-resolution ($\lambda/\Delta\lambda = 28,000$) and high signal-to-noise ($>500$) spectra taken with a NIR spectrograph, WINERED, we present measurements of the iron abundances of two prototype red giants: Arcturus and $\mu$ Leo. A bootstrap method for determining the microturbulence and abundance together with their errors is demonstrated. The standard deviations of $\log\epsilon_{\rm Fe}$ values from individual FeI lines are significantly smaller when we use the lines from MB99 instead of those from VALD. With the MB99 list, we obtained $\xi=1.20\pm0.11\ {\rm km~s^{-1}}$ and $\log\epsilon_{\rm Fe}=7.01\pm0.05$ dex for Arcturus, and $\xi=1.54\pm0.17\ {\rm km~s^{-1}}$ and $\log\epsilon_{\rm Fe}=7.73\pm0.07$ dex for $\mu$ Leo. These final values show better agreements with previous values in the literature than the corresponding values we obtained with VALD.
[5]  oai:arXiv.org:1805.00495  [pdf] - 1694139
Correction of near-infrared high-resolution spectra for telluric absorption at 0.90-1.35 microns
Comments: 20 pages, 16 figures, accepted for publication in Publications of the Astronomical Society of the Pacific
Submitted: 2018-05-01
We report a method of correcting a near-infrared (0.90-1.35 $\mu$m) high-resolution ($\lambda/\Delta\lambda\sim28,000$) spectrum for telluric absorption using the corresponding spectrum of a telluric standard star. The proposed method uses an A0\,V star or its analog as a standard star from which on the order of 100 intrinsic stellar lines are carefully removed with the help of a reference synthetic telluric spectrum. We find that this method can also be applied to feature-rich objects having spectra with heavily blended intrinsic stellar and telluric lines and present an application to a G-type giant using this approach. We also develop a new diagnostic method for evaluating the accuracy of telluric correction and use it to demonstrate that our method achieves an accuracy better than 2\% for spectral parts for which the atmospheric transmittance is as low as $\sim$20\% if telluric standard stars are observed under the following conditions: (1) the difference in airmass between the target and the standard is $\lesssim 0.05$; and (2) that in time is less than 1 h. In particular, the time variability of water vapor has a large impact on the accuracy of telluric correction and minimizing the difference in time from that of the telluric standard star is important especially in near-infrared high-resolution spectroscopic observation.
[6]  oai:arXiv.org:1802.07314  [pdf] - 1652495
On the chemical abundances of Miras in clusters: V1 in the metal-rich globular NGC 5927
Comments: Accepted for publication in the Astrophysical Journal Letters, 9 pages, 3 figures
Submitted: 2018-02-20
We present the first spectroscopic abundance determination of iron, alpha-elements (Si, Ca and Ti) and sodium for the Mira variable V1 in the metal-rich globular cluster NGC 5927. We use high-resolution (R~ 28,000), high signal-to-noise ratio (~200) spectra collected with WINERED, a near-infrared (NIR) spectrograph covering simultaneously the wavelength range 0.91--1.35 micron. The effective temperature and the surface gravity at the pulsation phase of the spectroscopic observation were estimated using both optical (V) and NIR time-series photometric data. We found that the Mira is metal-rich ([Fe/H]=-0.55 \pm 0.15) and moderately alpha-enhanced ([alpha/Fe]=0.15 \pm 0.01, sigma=0.2). These values agree quite well with the mean cluster abundances based on high-resolution optical spectra of several cluster red giants available in the literature ([Fe/H]=-0.47 \pm 0.06, [alpha/Fe]=+0.24 \pm 0.05). We also found a Na abundance of +0.35 \pm 0.20 that is higher than the mean cluster abundance based on optical spectra (+0.18 \pm 0.13). However, the lack of similar spectra for cluster red giants and that of corrections for departures from local-thermodynamical equilibrium prevents us from establishing whether the difference is intrinsic or connected with multiple populations. These findings indicate a strong similarity between optical and NIR metallicity scales in spite of the difference in the experimental equipment, data analysis and in the adopted spectroscopic diagnostics.
[7]  oai:arXiv.org:1710.04674  [pdf] - 1602685
Method to Estimate the Effective Temperatures of Late-Type Giants using Line-Depth Ratios in the Wavelength Range 0.97-1.32$\mu $m
Comments: 9 pages, 5 figures, 6 tables, accepted for publication in MNRAS
Submitted: 2017-10-12
The effective temperature, one of the most fundamental atmospheric parameters of a star, can be estimated using various methods, and here we focus on the method using line-depth ratios (LDRs). This method combines low- and high-excitation lines and makes use of relations between LDRs of these line pairs and the effective temperature. It has an advantage, for example, of being minimally affected by interstellar reddening, which changes stellar colours. We report 81 relations between LDRs and the effective temperature established with high-resolution, $\lambda /\Delta \lambda \sim 28,000$, spectra of nine G- to M-type giants in Y and J bands. Our analysis gives the first comprehensive set of LDR relations for this wavelength range. The combination of all these relations can be used to determine the effective temperatures of stars that have 3700<Teff<5400K and -0.5<[Fe/H]<+0.3dex to the precision of $\pm $10K in the best cases.