sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Ohno, Kazumasa

Normalized to: Ohno, K.

9 article(s) in total. 42 co-authors, from 1 to 3 common article(s). Median position in authors list is 1,0.

[1]  oai:arXiv.org:2007.02881  [pdf] - 2128545
Thermal inertias of pebble-pile comet 67P/Churyumov-Gerasimenko
Comments: 17 pages, 14 figures. Accepted for publication in MNRAS
Submitted: 2020-07-06
The Rosetta mission to comet 67P/Churyumov-Gerasimenko has provided new data to better understand what comets are made of. The weak tensile strength of the cometary surface materials suggests that the comet is a hierarchical dust aggregate formed through gravitational collapse of a bound clump of small dust aggregates so-called ``pebbles'' in the gaseous solar nebula. Since pebbles are the building blocks of comets, which are the survivors of planetesimals in the solar nebula, estimating the size of pebbles using a combination of thermal observations and numerical calculations is of great importance to understand the planet formation in the outer solar system. In this study, we calculated the thermal inertias and thermal skin depths of the hierarchical aggregates of pebbles, for both diurnal and orbital variations of the temperature. We found that the thermal inertias of the comet 67P/Churyumov-Gerasimenko are consistent with the hierarchical aggregate of cm- to dm-sized pebbles. Our findings indicate that the icy planetesimals may have formed via accretion of cm- to dm-sized pebbles in the solar nebula.
[2]  oai:arXiv.org:2005.08880  [pdf] - 2110072
Super-Rayleigh Slopes in Transmission Spectra of Exoplanets Generated by Photochemical Haze
Comments: 9 pages, 5 figures, accepted for publication in ApJL
Submitted: 2020-05-18
Spectral slopes in optical transmission spectra of exoplanetary atmospheres encapsulate information on the properties of exotic clouds. The slope is usually attributed to the Rayleigh scattering caused by tiny aerosol particles, whereas recent retrieval studies have suggested that the slopes are often steeper than the canonical Rayleigh slopes. Here, we propose that photochemical haze formed in vigorously mixing atmospheres can explain such super-Rayleigh slopes. We first analytically show that the spectral slope can be steepened by the vertical opacity gradient in which atmospheric opacity increases with altitude. Using a microphysical model, we demonstrate that such opacity gradient can be naturally generated by photochemical haze, especially when the eddy mixing is substantially efficient. The transmission spectra of hazy atmospheres can be demarcated into four typical regimes in terms of the haze mass flux and eddy diffusion coefficient. We find that the transmission spectrum can have the spectral slope 2--4 times steeper than the Rayleigh slope if the eddy diffusion coefficient is sufficiently high and the haze mass flux falls into a moderate value. Based on the eddy diffusion coefficient suggested by a recent study of atmospheric circulations, we suggest that photochemical haze preferentially generates super-Rayleigh slopes at planets with equilibrium temperature of 1000--1500 K, which might be consistent with results of recent retrieval studies. Our results would help to interpret the observations of spectral slopes from the perspective of haze formation.
[3]  oai:arXiv.org:1908.02201  [pdf] - 2065217
Clouds of Fluffy Aggregates: How They Form in Exoplanetary Atmospheres and Influence Transmission Spectra
Comments: 23 pages, 12 figures, accepted for publication in ApJ. v3: Figures 5-9 have been corrected
Submitted: 2019-08-06, last modified: 2020-01-20
Transmission spectrum surveys have suggested the ubiquity of high-altitude clouds in exoplanetary atmospheres. Theoretical studies have investigated the formation processes of the high-altitude clouds; however, cloud particles have been commonly approximated as compact spheres, which is not always true for solid mineral particles that likely constitute exoplanetary clouds. Here, we investigate how the porosity of cloud particles evolve in exoplanetary atmospheres and influence the cloud vertical profiles. We first construct a porosity evolution model that takes into account the fractal aggregation and the compression of cloud particle aggregates. Using a cloud microphysical model coupled with the porosity model, we demonstrate that the particle internal density can significantly decrease during the cloud formation. As a result, fluffy-aggregate clouds ascend to altitude much higher than that for compact-sphere clouds assumed so far. We also examine how the fluffy-aggregate clouds affect transmission spectra. We find that the clouds largely obscure the molecular features and produce a spectral slope originated by the scattering properties of aggregates. Finally, we compare the synthetic spectra with the observations of GJ1214 b and find that its flat spectrum could be explained if the atmospheric metallicity is sufficiently high ($\ge100\times$ solar) and the monomer size is sufficiently small ($r_{\rm mon}<1~{\rm {\mu}m}$). The high-metallicity atmosphere may offer the clues to explore the gas accretion processes onto past GJ1214b.
[4]  oai:arXiv.org:1906.08127  [pdf] - 2025570
Understanding the atmospheric properties and chemical composition of the ultra-hot Jupiter HAT-P-7b: I. Cloud and chemistry mapping
Comments: 31 pages, accepted for publication in A&A
Submitted: 2019-06-19
Ultra-hot Jupiters have recently attracted interest from observers and theoreticians alike, as they provide observationally accessible test cases. We apply a hierarchical modelling approach as a virtual laboratory to study cloud formation and gas-phase chemistry. We utilise 97 vertical 1D profiles of a 3D GCM for HAT-P-7b to evaluate our kinetic cloud formation model consistently with the local equilibrium gas-phase composition. The day/night temperature difference on HAT-P-7b (~ 2500K) causes clouds to form on the nightside (dominated by H2/He) while the dayside (dominated by H/He) retains cloud-free equatorial regions. The cloud particles vary in composition and size throughout the vertical extension of the cloud, but also globally. TiO2[s]/Al2O3[s]/CaTiO3[s]-particles of cm-sized radii occur in the higher dayside-latitudes, resulting in a dayside dominated by gas-phase opacity. The opacity on the nightside, however, is dominated by 0.01 ... 0.1 mum particles made of a material mix dominated by silicates. The gas pressure at which the atmosphere becomes optically thick is ~1d-4 bar in cloudy regions, and ~0.1 bar in cloud-free regions. HAT-P-7b features strong morning/evening terminator asymmetries, providing an example of patchy clouds and azimuthally-inhomogeneous chemistry. The large temperature differences result in an increasing geometrical extension from the night- to the dayside. The chemcial equilibrium H2O abundance at the terminator changes by < 1 dex with altitude and < 0.3 dex (a factor of 2) across the terminator for a given pressure, indicating that H2O abundances derived from transmission spectra can be representative of the well-mixed metallicity at P > 10 bar. We suggest the atmospheric C/O as an important tool to trace the presence and location of clouds in exoplanet atmospheres. Phase curve variability of HAT-P-7b is unlikely to be caused by dayside clouds.
[5]  oai:arXiv.org:1903.00908  [pdf] - 1851731
Atmospheres on Nonsynchronized Eccentric-tilted Exoplanets II: Thermal Light Curves
Comments: 22 pages, 12 figures, Accepted for publication in ApJ
Submitted: 2019-03-03
Thermal light-curve analysis is a powerful approach to probe the thermal structures of exoplanetary atmospheres, which are greatly influenced by the planetary obliquity and eccentricity. Here we investigate the thermal light curves of eccentric-tilted exoplanets across various radiative timescales, eccentricities, obliquities, and viewing geometries using results of shallow-water simulations presented in Ohno $\&$ Zhang (2019). We also achieve an analytical theory of the thermal light curve that can explain general trends in the light curves of tilted exoplanets. For tilted planets in circular orbits, the orbital phase of the flux peak is largely controlled by either the flux from the hot spot projected onto the orbital plane or the pole heated at the summer solstice, depending on the radiative timescale $\tau_{\rm rad}$, planetary day $P_{\rm orb}$, and obliquity $\theta$. We find that tilted planets potentially produce the flux peak after the secondary eclipse when obliquity is $\theta$ > 90 deg for the hot regime $\tau_{\rm rad}<P_{\rm rot}$, or $\theta>18$ deg for the cool regime ${\tau}_{\rm rad} > P_{\rm rot}$. For tilted planets in eccentric orbits, the shape of the light curve is considerably influenced by the heating at the periapse. The flux peak occurring after the secondary eclipse can be used to distinguish tilted planets from nontilted planets when the periapse takes place before the secondary eclipse. Our results could help to constrain exoplanet obliquities in future observations.
[6]  oai:arXiv.org:1903.00907  [pdf] - 1851730
Atmospheres on Nonsynchronized Eccentric-tilted Exoplanets I: Dynamical Regimes
Comments: 19 pages, 12 figures, Accepted for publication in ApJ
Submitted: 2019-03-03
Relatively long-period nonsynchronized planets---such as warm Jupiters---potentially retain the primordial rotation, eccentricity, and obliquity that might encapsulate information on planetary climate and formation processes. To date, there has not been a systematic study on climate patterns on these planets that will significantly influence their observations. Here we investigate the atmospheric dynamics of nonsynchronized, fast-rotating exoplanets across various radiative timescales, eccentricities, and obliquities using a shallow water model. The dynamical pattern can be demarcated into five regimes in terms of radiative timescale $\tau_{\rm rad}$ and obliquity ${\theta}$. An atmosphere with $\tau_{\rm rad}$ shorter than a planetary day usually exhibits a strong day--night temperature contrast and a day-to-night flow pattern. In the intermediate $\tau_{\rm rad}$ regime between a planetary day and a year, the atmosphere is dominated by steady temperature and eastward jet patterns for ${\theta}$ < 18 deg but shows a strong seasonal variation for ${\theta}$ > 18 deg because the polar region undergoes an intense heating at around the summer solstice. If $\tau_{\rm rad}$ is longer than a year, seasonal variation is very weak. In this regime, eastward jets are developed for ${\theta}$ < 54 deg and westward jets are developed for ${\theta}$ > 54 deg. These dynamical regimes are also applicable to the planets in eccentric orbits. The large effects of exoplanetary obliquities on circulation patterns might offer observational signatures, which will be investigated in Paper II of this study.
[7]  oai:arXiv.org:1807.11005  [pdf] - 1724281
Kyoto's Event-Driven X-ray Astronomy SOI pixel sensor for the FORCE mission
Comments: 11 pages, 10 figures, Proceedings Volume 10709, High Energy, Optical, and Infrared Detectors for Astronomy VIII
Submitted: 2018-07-29
We have been developing monolithic active pixel sensors, X-ray Astronomy SOI pixel sensors, XRPIXs, based on a Silicon-On-Insulator (SOI) CMOS technology as soft X-ray sensors for a future Japanese mission, FORCE (Focusing On Relativistic universe and Cosmic Evolution). The mission is characterized by broadband (1-80 keV) X-ray imaging spectroscopy with high angular resolution ($<15$~arcsec), with which we can achieve about ten times higher sensitivity in comparison to the previous missions above 10~keV. Immediate readout of only those pixels hit by an X-ray is available by an event trigger output function implemented in each pixel with the time resolution higher than $10~{\rm \mu sec}$ (Event-Driven readout mode). It allows us to do fast timing observation and also reduces non-X-ray background dominating at a high X-ray energy band above 5--10~keV by adopting an anti-coincidence technique. In this paper, we introduce our latest results from the developments of the XRPIXs. (1) We successfully developed a 3-side buttable back-side illumination device with an imaging area size of 21.9~mm$\times$13.8~mm and an pixel size of $36~{\rm \mu m} \times 36~{\rm \mu m}$. The X-ray throughput with the device reaches higher than 0.57~kHz in the Event-Driven readout mode. (2) We developed a device using the double SOI structure and found that the structure improves the spectral performance in the Event-Driven readout mode by suppressing the capacitive coupling interference between the sensor and circuit layers. (3) We also developed a new device equipped with the Pinned Depleted Diode structure and confirmed that the structure reduces the dark current generated at the interface region between the sensor and the SiO$_2$ insulator layers. The device shows an energy resolution of 216~eV in FWHM at 6.4~keV in the Event-Driven readout mode.
[8]  oai:arXiv.org:1804.05708  [pdf] - 1694099
Microphysical Modeling of Mineral Clouds in GJ1214 b and GJ436 b: Predicting Upper Limits on the Cloud-Top Height
Comments: Accepted for publication in ApJ, 20 pages, 12 figures, 3 tables
Submitted: 2018-04-16
The ubiquity of clouds in the atmospheres of exoplanets, especially of super-Earths, is one of the outstanding issues for transmission spectra survey. The understanding about the formation process of clouds in super-Earths is necessary to interpret the observed spectra correctly. In this study, we investigate the vertical distributions of particle size and mass density of mineral clouds in super-Earths using a microphysical model that takes into account the vertical transport and growth of cloud particles in a self-consistent manner. We demonstrate that the vertical profiles of mineral clouds significantly vary with the concentration of cloud condensation nuclei and atmospheric metallicity. We find that the height of the cloud top increases with increasing metallicity as long as the metallicity is lower than a threshold. If the metallicity is larger than the threshold, the cloud-top height no longer increases appreciably with metallicity because coalescence yields larger particles of higher settling velocities. We apply our cloud model to GJ1214 b and GJ436 b for which recent transmission observations suggest the presence of high-altitude opaque clouds. For GJ436 b, we show that KCl particles can ascend high enough to explain the observation. For GJ1214 b, by contrast, the height of KCl clouds predicted from our model is too low to explain its flat transmission spectrum. Clouds made of highly porous KCl particles could explain the observations if the atmosphere is highly metal-rich, and hence the particle microstructure might be a key to interpret the flat spectrum of GJ1214 b.
[9]  oai:arXiv.org:1701.00917  [pdf] - 1534112
A Condensation-Coalescence Cloud Model for Exoplanetary Atmospheres: Formulation and Test Applications to Terrestrial and Jovian Clouds
Comments: 11 pages, 7 figures, accepted for publication in ApJ
Submitted: 2017-01-04
A number of transiting exoplanets have featureless transmission spectra that might suggest the presence of clouds at high altitudes. A realistic cloud model is necessary to understand the atmospheric conditions under which such high-altitude clouds can form. In this study, we present a new cloud model that takes into account the microphysics of both condensation and coalescence. Our model provides the vertical profiles of the size and density of cloud and rain particles in an updraft for a given set of physical parameters, including the updraft velocity and the number density of cloud condensation nuclei (CCN). We test our model by comparing with observations of trade-wind cumuli on the Earth and ammonia ice clouds in Jupiter. For trade-wind cumuli, the model including both condensation and coalescence gives predictions that are consistent with observations, while the model including only condensation overestimates the mass density of cloud droplets by up to an order of magnitude. For Jovian ammonia clouds, the condensation-coalescence model simultaneously reproduces the effective particle radius, cloud optical thickness, and cloud geometric thickness inferred from Voyager observations if the updraft velocity and CCN number density are taken to be consistent with the results of moist convection simulations and Galileo probe measurements, respectively. These results suggest that the coalescence of condensate particles is important not only in terrestrial water clouds but also in Jovian ice clouds. Our model will be useful to understand how the dynamics, compositions, and nucleation processes in exoplanetary atmospheresaffects the vertical extent and optical thickness of exoplanetary clouds via cloud microphysics.