We report follow-up observations of transiting exoplanets that have either large uncertainties (>10 minutes) in their transit times or have not been observed for over three years. A fully robotic ground-based telescope network, observations from citizen astronomers and data from TESS have been used to study eight planets, refining their ephemeris and orbital data. Such follow-up observations are key for ensuring accurate transit times for upcoming ground and space-based telescopes which may seek to characterise the atmospheres of these planets. We find deviations from the expected transit time for all planets, with transits occurring outside the 1 sigma uncertainties for seven planets. Using the newly acquired observations, we subsequently refine their periods and reduce the current predicted ephemeris uncertainties to 0.28 - 4.01 minutes. A significant portion of this work has been completed by students at two high schools in London as part of the Original Research By Young Twinkle Students (ORBYTS) programme.

Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties as high as 20-30%. The aim of this paper is to determine the 3D shape models and compute the volumes for 13 main belt asteroids that were selected from those targets for which Gaia will provide the mass with an accuracy of better than 10%. We used the genetic Shaping Asteroids with Genetic Evolution (SAGE) algorithm to fit disk-integrated, dense photometric lightcurves and obtain detailed asteroid shape models. These models were scaled by fitting them to available stellar occultation and/or thermal infrared observations. We determine the spin and shape models for 13 main belt asteroids using the SAGE algorithm. Occultation fitting enables us to confirm main shape features and the spin state, while thermophysical modeling leads to more precise diameters as well as estimates of thermal inertia values. We calculated the volume of our sample of main-belt asteroids for which the Gaia satellite will provide precise mass determinations. From our volumes, it will then be possible to more accurately compute the bulk density, which is a fundamental physical property needed to understand the formation and evolution processes of small solar system bodies.

We present measurements of cosmic shear two-point correlation functions (TPCFs) from Hyper Suprime-Cam Subaru Strategic Program (HSC SSP) first-year data, and derived cosmological constraints based on a blind analysis. The HSC first-year shape catalog is divided into four tomographic redshift bins ranging from $z=0.3$ to 1.5 with equal widths of $\Delta z =0.3$. The unweighted galaxy number densities in each tomographic bin are 5.9, 5.9, 4.3, and 2.4 arcmin$^{-2}$ from lower to higher redshifts, respectively. We adopt the standard TPCF estimators, $\xi_\pm$, for our cosmological analysis, given that we find no evidence of the significant B-mode shear. The TPCFs are detected at high significance for all ten combinations of auto- and cross-tomographic bins over a wide angular range, yielding a total signal-to-noise ratio of 19 in the angular ranges adopted in the cosmological analysis, $7'<\theta<56'$ for $\xi_+$ and $28'<\theta<178'$ for $\xi_-$. We perform the standard Bayesian likelihood analysis for cosmological inference from the measured cosmic shear TPCFs, including contributions from intrinsic alignment of galaxies as well as systematic effects from PSF model errors, shear calibration uncertainty, and source redshift distribution errors. We adopt a covariance matrix derived from realistic mock catalogs constructed from full-sky gravitational lensing simulations that fully account for survey geometry and measurement noise. For a flat $\Lambda$ cold dark matter model, we find $S_8 \equiv \sigma_8\sqrt{\Omega_m/0.3}=0.804_{-0.029}^{+0.032}$, and $\Omega_m=0.346_{-0.100}^{+0.052}$. We carefully check the robustness of the cosmological results against astrophysical modeling uncertainties and systematic uncertainties in measurements, and find that none of them has a significant impact on the cosmological constraints.

This paper presents the second data release of the Hyper Suprime-Cam Subaru Strategic Program, a wide-field optical imaging survey on the 8.2 meter Subaru Telescope. The release includes data from 174 nights of observation through January 2018. The Wide layer data cover about 300 deg^2 in all five broadband filters (grizy) to the nominal survey exposure (10min in gr and 20min in izy). Partially observed areas are also included in the release; about 1100 deg^2 is observed in at least one filter and one exposure. The median seeing in the i-band is 0.6 arcsec, demonstrating the superb image quality of the survey. The Deep (26 deg^2) and UltraDeep (4 deg^2) data are jointly processed and the UltraDeep-COSMOS field reaches an unprecedented depth of i~28 at 5 sigma for point sources. In addition to the broad-bands, narrow-band data are also available in the Deep and UltraDeep fields. This release includes a major update to the processing pipeline, including improved sky subtraction, PSF modeling, object detection, and artifact rejection. The overall data quality has been improved, but this release is not without problems; there is a persistent deblender problem as well as new issues with masks around bright stars. The user is encouraged to review the issue list before utilizing the data for scientific explorations. All the image products as well as catalog products are available for download. The catalogs are also loaded to a database, which provides an easy interface for users to retrieve data for objects of interest. In addition to these main data products, detailed galaxy shape measurements withheld from the Public Data Release 1 (PDR1) are now available to the community. The shape catalog is drawn from the S16A internal release, which has a larger area than PDR1 (160 deg^2). All products are available at the data release site, https://hsc-release.mtk.nao.ac.jp/.

We report the discovery of 28 quasars and 7 luminous galaxies at 5.7 $\le$ z $\le$ 7.0. This is the tenth in a series of papers from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the deep multi-band imaging data produced by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. The total number of spectroscopically identified objects in SHELLQs has now grown to 93 high-z quasars, 31 high-z luminous galaxies, 16 [O III] emitters at z ~ 0.8, and 65 Galactic cool dwarfs (low-mass stars and brown dwarfs). These objects were found over 900 deg2, surveyed by HSC between 2014 March and 2018 January. The full quasar sample includes 18 objects with very strong and narrow Ly alpha emission, whose stacked spectrum is clearly different from that of other quasars or galaxies. While the stacked spectrum shows N V 1240 emission and resembles that of lower-z narrow-line quasars, the small Ly alpha width may suggest a significant contribution from the host galaxies. Thus these objects may be composites of quasars and star-forming galaxies.

This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an important role in answering the other top-level science questions of Solar Orbiter, as well as hosting the potential of a rich return in further science. SO/PHI measures the Zeeman effect and the Doppler shift in the FeI 617.3nm spectral line. To this end, the instrument carries out narrow-band imaging spectro-polarimetry using a tunable LiNbO_3 Fabry-Perot etalon, while the polarisation modulation is done with liquid crystal variable retarders (LCVRs). The line and the nearby continuum are sampled at six wavelength points and the data are recorded by a 2kx2k CMOS detector. To save valuable telemetry, the raw data are reduced on board, including being inverted under the assumption of a Milne-Eddington atmosphere, although simpler reduction methods are also available on board. SO/PHI is composed of two telescopes; one, the Full Disc Telescope (FDT), covers the full solar disc at all phases of the orbit, while the other, the High Resolution Telescope (HRT), can resolve structures as small as 200km on the Sun at closest perihelion. The high heat load generated through proximity to the Sun is greatly reduced by the multilayer-coated entrance windows to the two telescopes that allow less than 4% of the total sunlight to enter the instrument, most of it in a narrow wavelength band around the chosen spectral line.

We report the discovery of a quasar at z = 7.07, which was selected from the deep multi-band imaging data collected by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. This quasar, HSC J124353.93+010038.5, has an order of magnitude lower luminosity than do the other known quasars at z > 7. The rest-frame ultraviolet absolute magnitude is M1450 = -24.13 +/- 0.08 mag and the bolometric luminosity is Lbol = (1.4 +/- 0.1) x 10^{46} erg/s. Its spectrum in the optical to near-infrared shows strong emission lines, and shows evidence for a fast gas outflow, as the C IV line is blueshifted and there is indication of broad absorption lines. The Mg II-based black hole mass is Mbh = (3.3 +/- 2.0) x 10^8 Msun, thus indicating a moderate mass accretion rate with an Eddington ratio 0.34 +/- 0.20. It is the first z > 7 quasar with sub-Eddington accretion, besides being the third most distant quasar, known to date. The luminosity and black hole mass are comparable to, or even lower than, those measured for the majority of low-z quasars discovered by the Sloan Digital Sky Survey, and thus this quasar likely represents a z > 7 counterpart to quasars commonly observed in the low-z universe.

We measure cosmic weak lensing shear power spectra with the Subaru Hyper Suprime-Cam (HSC) survey first-year shear catalog covering 137deg$^2$ of the sky. Thanks to the high effective galaxy number density of $\sim$17 arcmin$^{-2}$ even after conservative cuts such as magnitude cut of $i<24.5$ and photometric redshift cut of $0.3\leq z \leq 1.5$, we obtain a high significance measurement of the cosmic shear power spectra in 4 tomographic redshift bins, achieving a total signal-to-noise ratio of 16 in the multipole range $300 \leq \ell \leq 1900$. We carefully account for various uncertainties in our analysis including the intrinsic alignment of galaxies, scatters and biases in photometric redshifts, residual uncertainties in the shear measurement, and modeling of the matter power spectrum. The accuracy of our power spectrum measurement method as well as our analytic model of the covariance matrix are tested against realistic mock shear catalogs. For a flat $\Lambda$ cold dark matter ($\Lambda$CDM) model, we find $S_8\equiv \sigma_8(\Omega_{\rm m}/0.3)^\alpha=0.800^{+0.029}_{-0.028}$ for $\alpha=0.45$ ($S_8=0.780^{+0.030}_{-0.033}$ for $\alpha=0.5$) from our HSC tomographic cosmic shear analysis alone. In comparison with Planck cosmic microwave background constraints, our results prefer slightly lower values of $S_8$, although metrics such as the Bayesian evidence ratio test do not show significant evidence for discordance between these results. We study the effect of possible additional systematic errors that are unaccounted in our fiducial cosmic shear analysis, and find that they can shift the best-fit values of $S_8$ by up to $\sim 0.6\sigma$ in both directions. The full HSC survey data will contain several times more area, and will lead to significantly improved cosmological constraints.

Writing generic data processing pipelines requires that the algorithmic code does not ever have to know about data formats of files, or the locations of those files. At LSST we have a software system known as "the Data Butler," that abstracts these details from the software developer. Scientists can specify the dataset they want in terms they understand, such as filter, observation identifier, date of observation, and instrument name, and the Butler translates that to one or more files which are read and returned to them as a single Python object. Conversely, once they have created a new dataset they can give it back to the Butler, with a label describing its new status, and the Butler can write it in whatever format it has been configured to use. All configuration is in YAML and supports standard defaults whilst allowing overrides.

The Large Synoptic Survey Telescope (LSST) is an ambitious astronomical survey with a similarly ambitious Data Management component. Data Management for LSST includes processing on both nightly and yearly cadences to generate transient alerts, deep catalogs of the static sky, and forced photometry light-curves for billions of objects at hundreds of epochs, spanning at least a decade. The algorithms running in these pipelines are individually sophisticated and interact in subtle ways. This paper provides an overview of those pipelines, focusing more on those interactions than the details of any individual algorithm.

We present new measurements of the quasar luminosity function (LF) at $z \sim 6$, over an unprecedentedly wide range of the rest-frame ultraviolet luminosity $M_{1450}$ from $-30$ to $-22$ mag. This is the fifth in a series of publications from the Subaru High-$z$ Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the deep multi-band imaging data produced by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. The LF was calculated with a complete sample of 110 quasars at $5.7 \le z \le 6.5$, which includes 48 SHELLQs quasars discovered over 650 deg$^2$, and 63 brighter quasars discovered by the Sloan Digital Sky Survey and the Canada-France-Hawaii Quasar Survey (including one overlapping object). This is the largest sample of $z \sim 6$ quasars with a well-defined selection function constructed to date, and has allowed us to detect significant flattening of the LF at its faint end. A double power-law function fit to the sample yields a faint-end slope $\alpha = -1.23^{+0.44}_{-0.34}$, a bright-end slope $\beta = -2.73^{+0.23}_{-0.31}$, a break magnitude $M_{1450}^* = -24.90^{+0.75}_{-0.90}$, and a characteristic space density $\Phi^* = 10.9^{+10.0}_{-6.8}$ Gpc$^{-3}$ mag$^{-1}$. Integrating this best-fit model over the range $-18 < M_{1450} < -30$ mag, quasars emit ionizing photons at the rate of $\dot{n}_{\rm ion} = 10^{48.8 \pm 0.1}$ s$^{-1}$ Mpc$^{-3}$ at $z = 6.0$. This is less than 10 % of the critical rate necessary to keep the intergalactic medium ionized, which indicates that quasars are not a major contributor to cosmic reionization.

We present results from a set of simulations designed to constrain the weak lensing shear calibration for the Hyper Suprime-Cam (HSC) survey. These simulations include HSC observing conditions and galaxy images from the Hubble Space Telescope (HST), with fully realistic galaxy morphologies and the impact of nearby galaxies included. We find that the inclusion of nearby galaxies in the images is critical to reproducing the observed distributions of galaxy sizes and magnitudes, due to the non-negligible fraction of unrecognized blends in ground-based data, even with the excellent typical seeing of the HSC survey (0.58" in the $i$-band). Using these simulations, we detect and remove the impact of selection biases due to the correlation of weights and the quantities used to define the sample (S/N and apparent size) with the lensing shear. We quantify and remove galaxy property-dependent multiplicative and additive shear biases that are intrinsic to our shear estimation method, including a $\sim 10$ per cent-level multiplicative bias due to the impact of nearby galaxies and unrecognized blends. Finally, we check the sensitivity of our shear calibration estimates to other cuts made on the simulated samples, and find that the changes in shear calibration are well within the requirements for HSC weak lensing analysis. Overall, the simulations suggest that the weak lensing multiplicative biases in the first-year HSC shear catalog are controlled at the 1 per cent level.

We present the source separation framework SCARLET for multi-band images, which is based on a generalization of the Non-negative Matrix Factorization to alternative and several simultaneous constraints. Our approach describes the observed scene as a mixture of components with compact spatial support and uniform spectra over their support. We present the algorithm to perform the matrix factorization and introduce constraints that are useful for optical images of stars and distinct stellar populations in galaxies, in particular symmetry and monotonicity with respect to the source peak position. We also derive the treatment of correlated noise and convolutions with band-dependent point spread functions, rendering our approach applicable to coadded images observed under variable seeing conditions. SCARLET thus yields a PSF-matched photometry measurement with an optimally chosen weight function given by the mean morphology in all available bands. We demonstrate the performance of SCARLET for deblending crowded extragalactic scenes and on an AGN jet -- host galaxy separation problem in deep 5-band imaging from the Hyper Suprime-Cam Stategic Survey Program. Using simulations with prominent crowding we show that SCARLET yields superior results to the HSC-SDSS deblender for the recovery of total fluxes, colors, and morphologies. Due to its non-parametric nature, a conceptual limitation of SCARLET is its sensitivity to undetected sources or multiple stellar population within detected sources, but an iterative strategy that adds components at the location of significant residuals appears promising. The code is implemented in Python with C++ extensions and is available at https://github.com/fred3m/scarlet

(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. LSST will be a wide-field ground-based system sited at Cerro Pach\'{o}n in northern Chile. The telescope will have an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg$^2$ field of view, and a 3.2 Gigapixel camera. The standard observing sequence will consist of pairs of 15-second exposures in a given field, with two such visits in each pointing in a given night. With these repeats, the LSST system is capable of imaging about 10,000 square degrees of sky in a single filter in three nights. The typical 5$\sigma$ point-source depth in a single visit in $r$ will be $\sim 24.5$ (AB). The project is in the construction phase and will begin regular survey operations by 2022. The survey area will be contained within 30,000 deg$^2$ with $\delta<+34.5^\circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\% of the observing time will be devoted to a deep-wide-fast survey mode which will uniformly observe a 18,000 deg$^2$ region about 800 times (summed over all six bands) during the anticipated 10 years of operations, and yield a coadded map to $r\sim27.5$. The remaining 10\% of the observing time will be allocated to projects such as a Very Deep and Fast time domain survey. The goal is to make LSST data products, including a relational database of about 32 trillion observations of 40 billion objects, available to the public and scientists around the world.

We report discovery of 41 new high-z quasars and luminous galaxies, which were spectroscopically identified at 5.7 < z < 6.9. This is the fourth in a series of papers from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, based on the deep multi-band imaging data collected by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. We selected the photometric candidates by a Bayesian probabilistic algorithm, and then carried out follow-up spectroscopy with the Gran Telescopio Canarias and the Subaru Telescope. Combined with the sample presented in the previous papers, we have now spectroscopically identified 137 extremely-red HSC sources over about 650 deg2, which include 64 high-z quasars, 24 high-z luminous galaxies, 6 [O III] emitters at z ~ 0.8, and 43 Galactic cool dwarfs (low-mass stars and brown dwarfs). The new quasars span the luminosity range from M1450 ~ -26 to -22 mag, and continue to populate a few magnitude lower luminosities than have been probed by previous wide-field surveys. In a companion paper, we derive the quasar luminosity function at z ~ 6 over an unprecedentedly wide range of M1450 ~ -28 to -21 mag, exploiting the SHELLQs and other survey outcomes.

Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2m Subaru telescope on the summit of Maunakea in Hawaii. A team of scientists from Japan, Taiwan and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg$^2$ in five broad bands ($grizy$), with a $5\,\sigma$ point-source depth of $r \approx 26$. The Deep layer covers a total of 26~deg$^2$ in four fields, going roughly a magnitude fainter, while the UltraDeep layer goes almost a magnitude fainter still in two pointings of HSC (a total of 3.5 deg$^2$). Here we describe the instrument, the science goals of the survey, and the survey strategy and data processing. This paper serves as an introduction to a special issue of the Publications of the Astronomical Society of Japan, which includes a large number of technical and scientific papers describing results from the early phases of this survey.

We present and characterize the catalog of galaxy shape measurements that will be used for cosmological weak lensing measurements in the Wide layer of the first year of the Hyper Suprime-Cam (HSC) survey. The catalog covers an area of 136.9 deg$^2$ split into six fields, with a mean $i$-band seeing of $0.58$ arcsec and $5\sigma$ point-source depth of $i\sim 26$. Given conservative galaxy selection criteria for first year science, the depth and excellent image quality results in unweighted and weighted source number densities of 24.6 and 21.8 arcmin$^{-2}$, respectively. We define the requirements for cosmological weak lensing science with this catalog, then focus on characterizing potential systematics in the catalog using a series of internal null tests for problems with point-spread function (PSF) modeling, shear estimation, and other aspects of the image processing. We find that the PSF models narrowly meet requirements for weak lensing science with this catalog, with fractional PSF model size residuals of approximately $0.003$ (requirement: 0.004) and the PSF model shape correlation function $\rho_1<3\times 10^{-7}$ (requirement: $4\times 10^{-7}$) at 0.5$^\circ$ scales. A variety of galaxy shape-related null tests are statistically consistent with zero, but star-galaxy shape correlations reveal additive systematics on $>1^\circ$ scales that are sufficiently large as to require mitigation in cosmic shear measurements. Finally, we discuss the dominant systematics and the planned algorithmic changes to reduce them in future data reductions.

The Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP) is a three-layered imaging survey aimed at addressing some of the most outstanding questions in astronomy today, including the nature of dark matter and dark energy. The survey has been awarded 300 nights of observing time at the Subaru Telescope and it started in March 2014. This paper presents the first public data release of HSC-SSP. This release includes data taken in the first 1.7 years of observations (61.5 nights) and each of the Wide, Deep, and UltraDeep layers covers about 108, 26, and 4 square degrees down to depths of i~26.4, ~26.5, and ~27.0 mag, respectively (5sigma for point sources). All the layers are observed in five broad bands (grizy), and the Deep and UltraDeep layers are observed in narrow bands as well. We achieve an impressive image quality of 0.6 arcsec in the i-band in the Wide layer. We show that we achieve 1-2 per cent PSF photometry (rms) both internally and externally (against Pan-STARRS1), and ~10 mas and 40 mas internal and external astrometric accuracy, respectively. Both the calibrated images and catalogs are made available to the community through dedicated user interfaces and database servers. In addition to the pipeline products, we also provide value-added products such as photometric redshifts and a collection of public spectroscopic redshifts. Detailed descriptions of all the data can be found online. The data release website is https://hsc-release.mtk.nao.ac.jp/.

Context. The so-called Barbarian asteroids share peculiar, but common polarimetric properties, probably related to both their shape and composition. They are named after (234) Barbara, the first on which such properties were identified. As has been suggested, large scale topographic features could play a role in the polarimetric response, if the shapes of Barbarians are particularly irregular and present a variety of scattering/incidence angles. This idea is supported by the shape of (234) Barbara, that appears to be deeply excavated by wide concave areas revealed by photometry and stellar occultations. Aims. With these motivations, we started an observation campaign to characterise the shape and rotation properties of Small Main- Belt Asteroid Spectroscopic Survey (SMASS) type L and Ld asteroids. As many of them show long rotation periods, we activated a worldwide network of observers to obtain a dense temporal coverage. Methods. We used light-curve inversion technique in order to determine the sidereal rotation periods of 15 asteroids and the con- vergence to a stable shape and pole coordinates for 8 of them. By using available data from occultations, we are able to scale some shapes to an absolute size. We also study the rotation periods of our sample looking for confirmation of the suspected abundance of asteroids with long rotation periods. Results. Our results show that the shape models of our sample do not seem to have peculiar properties with respect to asteroids with similar size, while an excess of slow rotators is most probably confirmed.

We present wide-field (167 deg$^2$) weak lensing mass maps from the Hyper Supreme-Cam Subaru Strategic Program (HSC-SSP). We compare these weak lensing based dark matter maps with maps of the distribution of the stellar mass associated with luminous red galaxies. We find a strong correlation between these two maps with a correlation coefficient of $\rho=0.54\pm0.03$ (for a smoothing size of $8'$). This correlation is detected even with a smaller smoothing scale of $2'$ ($\rho=0.34\pm 0.01$). This detection is made uniquely possible because of the high source density of the HSC-SSP weak lensing survey ($\bar{n}\sim 25$ arcmin$^{-2}$). We also present a variety of tests to demonstrate that our maps are not significantly affected by systematic effects. By using the photometric redshift information associated with source galaxies, we reconstruct a three-dimensional mass map. This three-dimensional mass map is also found to correlate with the three-dimensional galaxy mass map. Cross-correlation tests presented in this paper demonstrate that the HSC-SSP weak lensing mass maps are ready for further science analyses.

We present spectroscopic identification of 32 new quasars and luminous galaxies discovered at 5.7 < z < 6.8. This is the second in a series of papers presenting the results of the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the deep multi-band imaging data produced by the Hyper Suprime-Cam (HSC) Subaru Strategic Program survey. The photometric candidates were selected by a Bayesian probabilistic algorithm, and then observed with spectrographs on the Gran Telescopio Canarias and the Subaru Telescope. Combined with the sample presented in the previous paper, we have now identified 64 HSC sources over about 430 deg2, which include 33 high-z quasars, 14 high-z luminous galaxies, 2 [O III] emitters at z ~ 0.8, and 15 Galactic brown dwarfs. The new quasars have considerably lower luminosity (M1450 ~ -25 to -22 mag) than most of the previously known high-z quasars. Several of these quasars have luminous (> 10^(43) erg/s) and narrow (< 500 km/s) Ly alpha lines, and also a possible mini broad absorption line system of N V 1240 in the composite spectrum, which clearly separate them from typical quasars. On the other hand, the high-z galaxies have extremely high luminosity (M1450 ~ -24 to -22 mag) compared to other galaxies found at similar redshift. With the discovery of these new classes of objects, we are opening up new parameter spaces in the high-z Universe. Further survey observations and follow-up studies of the identified objects, including the construction of the quasar luminosity function at z ~ 6, are ongoing.

We present the procedure to build and validate the bright-star masks for the Hyper-Suprime-Cam Strategic Subaru Proposal (HSC-SSP) survey. To identify and mask the saturated stars in the full HSC-SSP footprint, we rely on the Gaia and Tycho-2 star catalogues. We first assemble a pure star catalogue down to $G_{\rm Gaia} < 18$ after removing $\sim1.5\%$ of sources that appear extended in the Sloan Digital Sky Survey (SDSS). We perform visual inspection on the early data from the S16A internal release of HSC-SSP, finding that our star catalogue is $99.2\%$ pure down to $G_{\rm Gaia} < 18$. Second, we build the mask regions in an automated way using stacked detected source measurements around bright stars binned per $G_{\rm Gaia}$ magnitude. Finally, we validate those masks from visual inspection and comparison with the literature of galaxy number counts and angular two-point correlation functions. This version (Arcturus) supersedes the previous version (Sirius) used in the S16A internal and DR1 public releases. We publicly release the full masks and tools to flag objects in the entire footprint of the planned HSC-SSP observations at this address: ftp://obsftp.unige.ch/pub/coupon/brightStarMasks/HSC-SSP/.

In this paper, we describe the optical imaging data processing pipeline developed for the Subaru Telescope's Hyper Suprime-Cam (HSC) instrument. The HSC Pipeline builds on the prototype pipeline being developed by the Large Synoptic Survey Telescope's Data Management system, adding customizations for HSC, large-scale processing capabilities, and novel algorithms that have since been reincorporated into the LSST codebase. While designed primarily to reduce HSC Subaru Strategic Program (SSP) data, it is also the recommended pipeline for reducing general-observer HSC data. The HSC pipeline includes high level processing steps that generate coadded images and science-ready catalogs as well as low-level detrending and image characterizations.

The Subaru Strategic Program (SSP) is an ambitious multi-band survey using the Hyper Suprime-Cam (HSC) on the Subaru telescope. The Wide layer of the SSP is both wide and deep, reaching a detection limit of i~26.0 mag. At these depths, it is challenging to achieve accurate, unbiased, and consistent photometry across all five bands. The HSC data are reduced using a pipeline that builds on the prototype pipeline for the Large Synoptic Survey Telescope. We have developed a Python-based, flexible framework to inject synthetic galaxies into real HSC images called SynPipe. Here we explain the design and implementation of SynPipe and generate a sample of synthetic galaxies to examine the photometric performance of the HSC pipeline. For stars, we achieve 1% photometric precision at i~19.0 mag and 6% precision at i~25.0 in the i-band. For synthetic galaxies with single-Sersic profiles, forced CModel photometry achieves 13% photometric precision at i~20.0 mag and 18% precision at i~25.0 in the i-band. We show that both forced PSF and CModel photometry yield unbiased color estimates that are robust to seeing conditions. We identify several caveats that apply to the version of HSC pipeline used for the first public HSC data release (DR1) that need to be taking into consideration. First, the degree to which an object is blended with other objects impacts the overall photometric performance. This is especially true for point sources. Highly blended objects tend to have larger photometric uncertainties, systematically underestimated fluxes and slightly biased colors. Second, >20% of stars at 22.5< i < 25.0 mag can be misclassified as extended objects. Third, the current CModel algorithm tends to strongly underestimate the half-light radius and ellipticity of galaxy with i>21.5 mag.

We examine the clustering of quasars over a wide luminosity range, by utilizing 901 quasars at $\overline{z}_{\rm phot}\sim3.8$ with $-24.73<M_{\rm 1450}<-22.23$ photometrically selected from the Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP) S16A Wide2 date release and 342 more luminous quasars at $3.4<z_{\rm spec}<4.6$ having $-28.0<M_{\rm 1450}<-23.95$ from the Sloan Digital Sky Survey (SDSS) that fall in the HSC survey fields. We measure the bias factors of two quasar samples by evaluating the cross-correlation functions (CCFs) between the quasar samples and 25790 bright $z\sim4$ Lyman Break Galaxies (LBGs) in $M_{\rm 1450}<-21.25$ photometrically selected from the HSC dataset. Over an angular scale of \timeform{10.0"} to \timeform{1000.0"}, the bias factors are $5.93^{+1.34}_{-1.43}$ and $2.73^{+2.44}_{-2.55}$ for the low and high luminosity quasars, respectively, indicating no luminosity dependence of quasar clustering at $z\sim4$. It is noted that the bias factor of the luminous quasars estimated by the CCF is smaller than that estimated by the auto-correlation function (ACF) over a similar redshift range, especially on scales below \timeform{40.0"}. Moreover, the bias factor of the less-luminous quasars implies the minimal mass of their host dark matter halos (DMHs) is $0.3$-$2\times10^{12}h^{-1}M_{\odot}$, corresponding to a quasar duty cycle of $0.001$-$0.06$.

We present the luminosity function of z=4 quasars based on the Hyper Suprime-Cam Subaru Strategic Program Wide layer imaging data in the g, r, i, z, and y bands covering 339.8 deg^2. From stellar objects, 1666 z~4 quasar candidates are selected by the g-dropout selection down to i=24.0 mag. Their photometric redshifts cover the redshift range between 3.6 and 4.3 with an average of 3.9. In combination with the quasar sample from the Sloan Digital Sky Survey in the same redshift range, the quasar luminosity function covering the wide luminosity range of M1450=-22 to -29 mag is constructed. It is well described by a double power-law model with a knee at M1450=-25.36+-0.13 mag and a flat faint-end slope with a power-law index of -1.30+-0.05. The knee and faint-end slope show no clear evidence of redshift evolution from those at z~2. The flat slope implies that the UV luminosity density of the quasar population is dominated by the quasars around the knee, and does not support the steeper faint-end slope at higher redshifts reported at z>5. If we convert the M1450 luminosity function to the hard X-ray 2-10keV luminosity function using the relation between UV and X-ray luminosity of quasars and its scatter, the number density of UV-selected quasars matches well with that of the X-ray-selected AGNs above the knee of the luminosity function. Below the knee, the UV-selected quasars show a deficiency compared to the hard X-ray luminosity function. The deficiency can be explained by the lack of obscured AGNs among the UV-selected quasars.

We report the discovery of 15 quasars and bright galaxies at 5.7 < z < 6.9. This is the initial result from the Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the exquisite multiband imaging data produced by the Subaru Hyper Suprime-Cam (HSC) Strategic Program survey. The candidate selection is performed by combining several photometric approaches including a Bayesian probabilistic algorithm to reject stars and dwarfs. The spectroscopic identification was carried out with the Gran Telescopio Canarias and the Subaru Telescope for the first 80 deg2 of the survey footprint. The success rate of our photometric selection is quite high, approaching 100 % at the brighter magnitudes (zAB < 23.5 mag). Our selection also recovered all the known high-z quasars on the HSC images. Among the 15 discovered objects, six are likely quasars, while the other six with interstellar absorption lines and in some cases narrow emission lines are likely bright Lyman-break galaxies. The remaining three objects have weak continua and very strong and narrow Ly alpha lines, which may be excited by ultraviolet light from both young stars and quasars. These results indicate that we are starting to see the steep rise of the luminosity function of z > 6 galaxies, compared with that of quasars, at magnitudes fainter than M1450 ~ -22 mag or zAB ~24 mag. Follow-up studies of the discovered objects as well as further survey observations are ongoing.

The Large Synoptic Survey Telescope (LSST) is a large-aperture, wide-field, ground-based survey system that will image the sky in six optical bands from 320 to 1050 nm, uniformly covering approximately $18,000$deg$^2$ of the sky over 800 times. The LSST is currently under construction on Cerro Pach\'on in Chile, and expected to enter operations in 2022. Once operational, the LSST will explore a wide range of astrophysical questions, from discovering "killer" asteroids to examining the nature of Dark Energy. The LSST will generate on average 15 TB of data per night, and will require a comprehensive Data Management system to reduce the raw data to scientifically useful catalogs and images with minimum human intervention. These reductions will result in a real-time alert stream, and eleven data releases over the 10-year duration of LSST operations. To enable this processing, the LSST project is developing a new, general-purpose, high-performance, scalable, well documented, open source data processing software stack for O/IR surveys. Prototypes of this stack are already capable of processing data from existing cameras (e.g., SDSS, DECam, MegaCam), and form the basis of the Hyper-Suprime Cam (HSC) Survey data reduction pipeline.

Asteroid modeling efforts in the last decade resulted in a comprehensive dataset of almost 400 convex shape models and their rotation states. This amount already provided a deep insight into physical properties of main-belt asteroids or large collisional families. We aim to increase the number of asteroid shape models and rotation states. Such results are an important input for various further studies such as analysis of asteroid physical properties in different populations, including smaller collisional families, thermophysical modeling, and scaling shape models by disk-resolved images, or stellar occultation data. This provides, in combination with known masses, bulk density estimates, but constrains also theoretical collisional and evolutional models of the Solar System. We use all available disk-integrated optical data (i.e., classical dense-in-time photometry obtained from public databases and through a large collaboration network as well as sparse-in-time individual measurements from a few sky surveys) as an input for the convex inversion method, and derive 3D shape models of asteroids, together with their rotation periods and orientations of rotation axes. The key ingredient is the support of more that one hundred observers who submit their optical data to publicly available databases. We present updated shape models for 36 asteroids, for which mass estimates are currently available in the literature or their masses will be most likely determined from their gravitational influence on smaller bodies, which orbital deflection will be observed by the ESA Gaia astrometric mission. This was achieved by using additional optical data from recent apparitions for the shape optimization. Moreover, we also present new shape model determinations for 250 asteroids, including 13 Hungarias and 3 near-Earth asteroids.

We present the photometric properties of a sample of infrared (IR) bright dust obscured galaxies (DOGs). Combining wide and deep optical images obtained with the Hyper Suprime-Cam (HSC) on the Subaru Telescope and all-sky mid-IR (MIR) images taken with Wide-Field Infrared Survey Explorer (WISE), we discovered 48 DOGs with $i - K_\mathrm{s} > 1.2$ and $i - [22] > 7.0$, where $i$, $K_\mathrm{s}$, and [22] represent AB magnitude in the $i$-band, $K_\mathrm{s}$-band, and 22 $\mu$m, respectively, in the GAMA 14hr field ($\sim$ 9 deg$^2$). Among these objects, 31 ($\sim$ 65 %) show power-law spectral energy distributions (SEDs) in the near-IR (NIR) and MIR regime, while the remainder show a NIR bump in their SEDs. Assuming that the redshift distribution for our DOGs sample is Gaussian, with mean and sigma $z$ = 1.99 $\pm$ 0.45, we calculated their total IR luminosity using an empirical relation between 22 $\mu$m luminosity and total IR luminosity. The average value of the total IR luminosity is (3.5 $\pm$ 1.1) $\times$ $10^{13}$ L$_{\odot}$, which classifies them as hyper-luminous infrared galaxies (HyLIRGs). We also derived the total IR luminosity function (LF) and IR luminosity density (LD) for a flux-limited subsample of 18 DOGs with 22 $\mu$m flux greater than 3.0 mJy and with $i$-band magnitude brighter than 24 AB magnitude. The derived space density for this subsample is log $\phi$ = -6.59 $\pm$ 0.11 [Mpc$^{-3}$]. The IR LF for DOGs including data obtained from the literature is well fitted by a double-power law. The derived lower limit for the IR LD for our sample is $\rho_{\mathrm{IR}}$ $\sim$ 3.8 $\times$ 10$^7$ [L$_{\odot}$ Mpc$^{-3}$] and its contributions to the total IR LD, IR LD of all ultra-luminous infrared galaxies (ULIRGs), and that of all DOGs are $>$ 3 %, $>$ 9 %, and $>$ 15 %, respectively.

We present first results from the third GRavitational lEnsing Accuracy Testing (GREAT3) challenge, the third in a sequence of challenges for testing methods of inferring weak gravitational lensing shear distortions from simulated galaxy images. GREAT3 was divided into experiments to test three specific questions, and included simulated space- and ground-based data with constant or cosmologically-varying shear fields. The simplest (control) experiment included parametric galaxies with a realistic distribution of signal-to-noise, size, and ellipticity, and a complex point spread function (PSF). The other experiments tested the additional impact of realistic galaxy morphology, multiple exposure imaging, and the uncertainty about a spatially-varying PSF; the last two questions will be explored in Paper II. The 24 participating teams competed to estimate lensing shears to within systematic error tolerances for upcoming Stage-IV dark energy surveys, making 1525 submissions overall. GREAT3 saw considerable variety and innovation in the types of methods applied. Several teams now meet or exceed the targets in many of the tests conducted (to within the statistical errors). We conclude that the presence of realistic galaxy morphology in simulations changes shear calibration biases by $\sim 1$ per cent for a wide range of methods. Other effects such as truncation biases due to finite galaxy postage stamps, and the impact of galaxy type as measured by the S\'{e}rsic index, are quantified for the first time. Our results generalize previous studies regarding sensitivities to galaxy size and signal-to-noise, and to PSF properties such as seeing and defocus. Almost all methods' results support the simple model in which additive shear biases depend linearly on PSF ellipticity.

GALSIM is a collaborative, open-source project aimed at providing an image simulation tool of enduring benefit to the astronomical community. It provides a software library for generating images of astronomical objects such as stars and galaxies in a variety of ways, efficiently handling image transformations and operations such as convolution and rendering at high precision. We describe the GALSIM software and its capabilities, including necessary theoretical background. We demonstrate that the performance of GALSIM meets the stringent requirements of high precision image analysis applications such as weak gravitational lensing, for current datasets and for the Stage IV dark energy surveys of the Large Synoptic Survey Telescope, ESA's Euclid mission, and NASA's WFIRST-AFTA mission. The GALSIM project repository is public and includes the full code history, all open and closed issues, installation instructions, documentation, and wiki pages (including a Frequently Asked Questions section). The GALSIM repository can be found at https://github.com/GalSim-developers/GalSim .

Aims. In this work, we present an extended study of the dust environment of a sample of short period comets and their dynamical history. With this aim, we characterized the dust tails when the comets are active, and we made a statistical study to determine their dynamical evolution. The targets selected were 22P/Kopff, 30P/Reinmuth 1, 78P/Gehrels 2, 115P/Maury, 118P/Shoemaker-Levy 4, 123P/West-Hartley, 157P/Tritton, 185/Petriew, and P/2011 W2 (Rinner). Methods. We use two different observational data: a set of images taken at the Observatorio de Sierra Nevada and the Afrho curves provided by the amateur astronomical association Cometas-Obs. To model these observations, we use our Monte Carlo dust tail code. From this analysis, we derive the dust parameters, which best describe the dust environment: dust loss rates, ejection velocities, and size distribution of particles. On the other hand, we use a numerical integrator to study the dynamical history of the comets, which allows us to determine with a 90% of confidence level the time spent by these objects in the region of Jupiter Family Comets. Results. From the Monte Carlo dust tail code, we derived three categories attending to the amount of dust emitted: Weakly active (115P, 157P, and Rinner), moderately active (30P, 123P, and 185P), and highly active (22P, 78P, and 118P). The dynamical studies showed that the comets of this sample are young in the Jupiter Family region, where the youngest ones are 22P (100 yr), 78P (500 yr), and 118P (600 yr). The study points to a certain correlation between comet activity and time spent in the Jupiter Family region, although this trend is not always fulfilled. The largest particle sizes are not tightly constrained, so that the total dust mass derived should be regarded as lower limits.}

The GRavitational lEnsing Accuracy Testing 3 (GREAT3) challenge is the third in a series of image analysis challenges, with a goal of testing and facilitating the development of methods for analyzing astronomical images that will be used to measure weak gravitational lensing. This measurement requires extremely precise estimation of very small galaxy shape distortions, in the presence of far larger intrinsic galaxy shapes and distortions due to the blurring kernel caused by the atmosphere, telescope optics, and instrumental effects. The GREAT3 challenge is posed to the astronomy, machine learning, and statistics communities, and includes tests of three specific effects that are of immediate relevance to upcoming weak lensing surveys, two of which have never been tested in a community challenge before. These effects include realistically complex galaxy models based on high-resolution imaging from space; spatially varying, physically-motivated blurring kernel; and combination of multiple different exposures. To facilitate entry by people new to the field, and for use as a diagnostic tool, the simulation software for the challenge is publicly available, though the exact parameters used for the challenge are blinded. Sample scripts to analyze the challenge data using existing methods will also be provided. See http://great3challenge.info and http://great3.projects.phys.ucl.ac.uk/leaderboard/ for more information.

The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can also be used in combination with other types of observational data (IR, adaptive optics images, stellar occultations), e.g., to determine sizes and thermal properties. We use all available photometric data of asteroids to derive their physical models by the lightcurve inversion method and compare the observed pole latitude distributions of all asteroids with known convex shape models with the simulated pole latitude distributions. We used classical dense photometric lightcurves from several sources and sparse-in-time photometry from the U.S. Naval Observatory in Flagstaff, Catalina Sky Survey, and La Palma surveys (IAU codes 689, 703, 950) in the lightcurve inversion method to determine asteroid convex models and their rotational states. We also extended a simple dynamical model for the spin evolution of asteroids used in our previous paper. We present 119 new asteroid models derived from combined dense and sparse-in-time photometry. We discuss the reliability of asteroid shape models derived only from Catalina Sky Survey data (IAU code 703) and present 20 such models. By using different values for a scaling parameter cYORP (corresponds to the magnitude of the YORP momentum) in the dynamical model for the spin evolution and by comparing synthetics and observed pole-latitude distributions, we were able to constrain the typical values of the cYORP parameter as between 0.05 and 0.6.

Data analysis methods have always been of critical importance for quantitative sciences. In astronomy, the increasing scale of current and future surveys is driving a trend towards a separation of the processes of low-level data reduction and higher-level scientific analysis. Algorithms and software responsible for the former are becoming increasingly complex, and at the same time more general - measurements will be used for a wide variety of scientific studies, and many of these cannot be anticipated in advance. On the other hand, increased sample sizes and the corresponding decrease in stochastic uncertainty puts greater importance on controlling systematic errors, which must happen for the most part at the lowest levels of data analysis. Astronomical measurement algorithms must improve in their handling of uncertainties as well, and hence must be designed with detailed knowledge of the requirements of different science goals. In this thesis, we advocate a Bayesian approach to survey data reduction as a whole, and focus specifically on the problem of modeling individual galaxies and stars. We present a Monte Carlo algorithm that can efficiently sample from the posterior probability for a flexible class of galaxy models, and propose a method for constructing and convolving these models using Gauss-Hermite ("shapelet") functions. These methods are designed to be efficient in a multi-epoch modeling ("multifit") sense, in which we compare a generative model to each exposure rather than combining the data from multiple exposures in advance. We also discuss how these methods are important for specific higher-level analyses - particularly weak gravitational lensing - as well as their interaction with the many other aspects of a survey reduction pipeline.

Gauss-Hermite and Gauss-Laguerre ("shapelet") decompositions of images have become important tools in galaxy modeling, particularly for the purpose of extracting ellipticity and morphological information from astronomical data. However, the standard shapelet basis functions cannot compactly represent galaxies with high ellipticity or large Sersic index, and the resulting underfitting bias has been shown to present a serious challenge for weak-lensing methods based on shapelets. We present here a new convolution relation and a compound "multi-scale" shapelet basis to address these problems, and provide a proof-of-concept demonstration using a small sample of nearby galaxies.

Next generation probes of dark matter and dark energy require high precision reconstruction of faint galaxy shapes from hundreds of dithered exposures. Current practice is to stack the images. While valuable for many applications, this stack is a highly compressed version of the data. Future weak lensing studies will require analysis of the full dataset using the stack and its associated catalog only as a starting point. We describe a "Multi-Fit" algorithm which simultaneously fits individual galaxy exposures to a common profile model convolved with each exposure's point spread function at that position in the image. This technique leads to an enhancement of the number of usable small galaxies at high redshift and, more significantly, a decrease in systematic shear error.