Normalized to: Asano, A.
[1]
oai:arXiv.org:1908.05510 [pdf] - 2025699
Development of a UV-transparent Lens Array for Enlarging the Effective
Area of Multichannel SiPMs
Submitted: 2019-08-15
We developed a UV-transparent lens array that can increase the photon
detection efficiency of a silicon photomultiplier (SiPM) array comprising of 64
pixels ($3\times3$ mm$^2$ each) and 0.2-mm gaps. Through the plano-convex
spherical lens on each $3.2\times3.2$ mm$^2$ region, we showed that the loss of
photon detection efficiency due to the pixel gaps could be recovered as the
incident photons get concentrated on the sensitive regions of the SiPM array.
By using a prototype lens array, we achieved approximately 10%-30% relative
increase in photon detection efficiency in our target angles of incidence of
30-60 deg.
[2]
oai:arXiv.org:1903.02241 [pdf] - 1875353
FeI lines in 0.91-1.33 ${\rm \mu}$m spectra of red giants for measuring
the microturbulence and metallicities
Kondo, Sohei;
Fukue, Kei;
Matsunaga, Noriyuki;
Ikeda, Yuji;
Taniguchi, Daisuke;
Kobayashi, Naoto;
Sameshima, Hiroaki;
Hamano, Satoshi;
Arai, Akira;
Kawakita, Hideyo;
Yasui, Chikako;
Izumi, Natsuko;
Mizumoto, Misaki;
Otsubo, Shogo;
Takenaka, Keiichi;
Watase, Ayaka;
Asano, Akira;
Yoshikawa, Tomohiro;
Tsujimoto, Takuji
Submitted: 2019-03-06
For a detailed analysis of stellar chemical abundances, high-resolution
spectra in the optical have mainly been used, while the development of
near-infrared (NIR) spectrograph has opened new wavelength windows. Red giants
have a large number of resolved absorption lines in both the optical and NIR
wavelengths, but the characteristics of the lines in different wave passbands
are not necessarily the same. We present a selection of FeI lines in the
$z^{\prime}$, $Y$, and $J$ bands (0.91-1.33 $\mu$m). On the basis of two
different lists of lines in this range, the Vienna Atomic Line Database (VALD)
and the catalog published by Mel\'endez & Barbuy in 1999 (MB99), we selected
sufficiently strong lines that are not severely blended and compiled lists with
107 FeI lines in total (97 and 75 lines from VALD and MB99, respectively).
Combining our lists with high-resolution ($\lambda/\Delta\lambda = 28,000$) and
high signal-to-noise ($>500$) spectra taken with a NIR spectrograph, WINERED,
we present measurements of the iron abundances of two prototype red giants:
Arcturus and $\mu$ Leo. A bootstrap method for determining the microturbulence
and abundance together with their errors is demonstrated. The standard
deviations of $\log\epsilon_{\rm Fe}$ values from individual FeI lines are
significantly smaller when we use the lines from MB99 instead of those from
VALD. With the MB99 list, we obtained $\xi=1.20\pm0.11\ {\rm km~s^{-1}}$ and
$\log\epsilon_{\rm Fe}=7.01\pm0.05$ dex for Arcturus, and $\xi=1.54\pm0.17\
{\rm km~s^{-1}}$ and $\log\epsilon_{\rm Fe}=7.73\pm0.07$ dex for $\mu$ Leo.
These final values show better agreements with previous values in the
literature than the corresponding values we obtained with VALD.
[3]
oai:arXiv.org:1810.07206 [pdf] - 1791191
WINERED high-resolution near-infrared line catalog: A-type star
Sameshima, H.;
Ikeda, Y.;
Matsunaga, N.;
Fukue, K.;
Kobayashi, N.;
Kondo, S.;
Hamano, S.;
Kawakita, H.;
Yasui, C.;
Izumi, N.;
Mizumoto, M.;
Otsubo, S.;
Takenaka, K.;
Watase, A.;
Asano, A.;
Yoshikawa, T.
Submitted: 2018-10-16
We present a catalog of absorption lines in the z', Y, and J bands that we
identified in 21 Lyn, a slowly rotating A0.5 V star. We detected 155 absorption
features in the high-resolution (0.90-1.35 um, R = 28,000) spectrum obtained
with the WINERED spectrograph after the telluric absorption was carefully
removed using a spectrum of a B-type star as a telluric standard. With a visual
comparison with synthetic spectra, we compiled a catalog of 219 atomic lines
for the 155 features, some of which are composed of multiple fine structure
lines. The high-quality WINERED spectrum enabled us to detect a large number of
weak lines down to ~1% in depth, which are identified for an A-type star for
the first time. The catalog includes the lines of H, C, N, O, Mg, Al, Si, S,
Ca, Fe, and Sr. These new lines are expected to be useful for spectral
classification and chemical abundance analyses, whilst the line list is useful
for observers who plan to use A-type stars as telluric standards because it is
necessary to distinguish between stellar lines and telluric absorption lines in
high-resolution spectra. ASCII versions of the spectra are available in the
online version of the journal.
[4]
oai:arXiv.org:1805.00495 [pdf] - 1694139
Correction of near-infrared high-resolution spectra for telluric
absorption at 0.90-1.35 microns
Sameshima, Hiroaki;
Matsunaga, Noriyuki;
Kobayashi, Naoto;
Kawakita, Hideyo;
Hamano, Satoshi;
Ikeda, Yuji;
Kondo, Sohei;
Fukue, Kei;
Taniguchi, Daisuke;
Mizumoto, Misaki;
Arai, Akira;
Otsubo, Shogo;
Takenaka, Keiichi;
Watase, Ayaka;
Asano, Akira;
Yasui, Chikako;
Izumi, Natsuko;
Yoshikawa, Tomohiro
Submitted: 2018-05-01
We report a method of correcting a near-infrared (0.90-1.35 $\mu$m)
high-resolution ($\lambda/\Delta\lambda\sim28,000$) spectrum for telluric
absorption using the corresponding spectrum of a telluric standard star. The
proposed method uses an A0\,V star or its analog as a standard star from which
on the order of 100 intrinsic stellar lines are carefully removed with the help
of a reference synthetic telluric spectrum. We find that this method can also
be applied to feature-rich objects having spectra with heavily blended
intrinsic stellar and telluric lines and present an application to a G-type
giant using this approach. We also develop a new diagnostic method for
evaluating the accuracy of telluric correction and use it to demonstrate that
our method achieves an accuracy better than 2\% for spectral parts for which
the atmospheric transmittance is as low as $\sim$20\% if telluric standard
stars are observed under the following conditions: (1) the difference in
airmass between the target and the standard is $\lesssim 0.05$; and (2) that in
time is less than 1 h. In particular, the time variability of water vapor has a
large impact on the accuracy of telluric correction and minimizing the
difference in time from that of the telluric standard star is important
especially in near-infrared high-resolution spectroscopic observation.
