sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Zhao, Fuyuan

Normalized to: Zhao, F.

12 article(s) in total. 282 co-authors, from 1 to 3 common article(s). Median position in authors list is 38,5.

[1]  oai:arXiv.org:2005.07864  [pdf] - 2096493
The backbone-residual model. Accurately characterising the instrumental profile of a fibre-fed echelle spectrograph
Comments: 15 pages, 14 figures. Submitted to A&A
Submitted: 2020-05-16
Context: Instrumental profile (IP) is the basic property of a spectrograph. Accurate IP characterisation is the prerequisite of accurate wavelength solution. It also facilitates new spectral acquisition methods such as the forward modeling and deconvolution. Aims: We investigate an IP modeling method for the fibre-fed echelle spectrograph with the emission lines of the ThAr lamp, and explore the method to evaluate the accuracy of IP characterisation. Methods: The backbone-residual (BR) model is put forward and tested on the fibre-fed High Resolution Spectrograph (HRS) at the Chinese Xinglong 2.16-m Telescope, which is the sum of the backbone function and the residual function. The backbone function is a bell-shaped function to describe the main component and the spatial variation of IP. The residual function, which is expressed as the cubic spline function, accounts for the difference between the bell-shaped function and the actual IP. The method of evaluating the accuracy of IP characterisation is based on the spectral reconstruction and Monte Carlo simulation. Results: The IP of HRS is characterised with the BR model, and the accuracy of the characterised IP reaches 0.006 of the peak value of the backbone function. This result demonstrates that the accurate IP characterisation has been achieved on HRS with the BR model, and the BR model is an excellent choice for accurate IP characterisation of fibre-fed echelle spectrographs.
[2]  oai:arXiv.org:1902.05508  [pdf] - 1970174
Neutrino physics with the PTOLEMY project: active neutrino properties and the light sterile case
Comments: Typos corrected; Matches version accepted by JCAP
Submitted: 2019-02-14, last modified: 2019-09-30
The PTOLEMY project aims to develop a scalable design for a Cosmic Neutrino Background (CNB) detector, the first of its kind and the only one conceived that can look directly at the image of the Universe encoded in neutrino background produced in the first second after the Big Bang. The scope of the work for the next three years is to complete the conceptual design of this detector and to validate with direct measurements that the non-neutrino backgrounds are below the expected cosmological signal. In this paper we discuss in details the theoretical aspects of the experiment and its physics goals. In particular, we mainly address three issues. First we discuss the sensitivity of PTOLEMY to the standard neutrino mass scale. We then study the perspectives of the experiment to detect the CNB via neutrino capture on tritium as a function of the neutrino mass scale and the energy resolution of the apparatus. Finally, we consider an extra sterile neutrino with mass in the eV range, coupled to the active states via oscillations, which has been advocated in view of neutrino oscillation anomalies. This extra state would contribute to the tritium decay spectrum, and its properties, mass and mixing angle, could be studied by analyzing the features in the beta decay electron spectrum.
[3]  oai:arXiv.org:1909.02161  [pdf] - 1956011
The Potential of Exozodiacal Disks Observations with the WFIRST Coronagraph Instrument
Comments: 6 pages, 2 figures
Submitted: 2019-09-04
The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) will be the first high-performance stellar coronagraph using active wavefront control for deep starlight suppression in space, providing unprecedented levels of contrast, spatial resolution, and sensitivity for astronomical observations in the optical. One science case enabled by the CGI will be taking images and(R~50)spectra of faint interplanetary dust structures present in the habitable zone of nearby sunlike stars (~10 pc) and within the snow-line of more distant ones(~20pc), down to dust density levels commensurate with that of the solar system zodiacal cloud. Reaching contrast levels below~10-7 for the first time, CGI will cross an important threshold in debris disks physics, accessing disks with low enough optical depths that their structure is dominated by transport phenomena than collisions. Hence, CGI results will be crucial for determining how exozodiacal dust grains are produced and transported in low-density disks around mature stars. Additionally, CGI will be able to measure the brightness level and constrain the degree of asymmetry of exozodiacal clouds around individual nearby sunlike stars in the optical, at the ~10x solar zodiacal emission level. This information will be extremely valuable for optimizing the observational strategy of possible future exo-Earth direct imaging missions, especially those planning to operate at optical wavelengths, such as Habitable Exoplanet Observatory (HabEx) and the Large Ultraviolet/Optical/Infrared Surveyor (LUVOIR).
[4]  oai:arXiv.org:1901.04050  [pdf] - 1814326
Key Technologies for the Wide Field Infrared Survey Telescope Coronagraph Instrument
Comments: Submitted in response to the 2018 NAS Exoplanet Science Strategy call. 5 pages, 2 figures
Submitted: 2019-01-13
The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) is a high-contrast imager and integral field spectrograph that will enable the study of exoplanets and circumstellar disks at visible wavelengths. Ground-based high-contrast instrumentation has fundamentally limited performance at small working angles, even under optimistic assumptions for 30m-class telescopes. There is a strong scientific driver for better performance, particularly at visible wavelengths. Future flagship mission concepts aim to image Earth analogues with visible light flux ratios of more than 10^10. CGI is a critical intermediate step toward that goal, with a predicted 10^8-9 flux ratio capability in the visible. CGI achieves this through improvements over current ground and space systems in several areas: (i) Hardware: space-qualified (TRL9) deformable mirrors, detectors, and coronagraphs, (ii) Algorithms: wavefront sensing and control; post-processing of integral field spectrograph, polarimetric, and extended object data, and (iii) Validation of telescope and instrument models at high accuracy and precision. This white paper, submitted to the 2018 NAS Exoplanet Science Strategy call, describes the status of key CGI technologies and presents ways in which performance is likely to evolve as the CGI design matures.
[5]  oai:arXiv.org:1810.06703  [pdf] - 1875231
A Design for an Electromagnetic Filter for Precision Energy Measurements at the Tritium Endpoint
Comments:
Submitted: 2018-10-15
We present a detailed description of the electromagnetic filter for the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Starting with an initial estimate for the orbital magnetic moment, the higher-order drift process of ExB is configured to balance the gradient-B drift motion of the electron in such a way as to guide the trajectory into the standing voltage potential along the mid-plane of the filter. As a function of drift distance along the length of the filter, the filter zooms in with exponentially increasing precision on the transverse velocity component of the electron kinetic energy. This yields a linear dimension for the total filter length that is exceptionally compact compared to previous techniques for electromagnetic filtering. The parallel velocity component of the electron kinetic energy oscillates in an electrostatic harmonic trap as the electron drifts along the length of the filter. An analysis of the phase-space volume conservation validates the expected behavior of the filter from the adiabatic invariance of the orbital magnetic moment and energy conservation following Liouville's theorem for Hamiltonian systems.
[6]  oai:arXiv.org:1807.03946  [pdf] - 1739047
A Weak Modulation Effect Detected in the Light Curves of KIC 5950759: Intrinsic or Instrumental Effect?
Comments: 10 pages, 7 figures. Published in ApJ (on 2018 August 23)
Submitted: 2018-07-11, last modified: 2018-08-24
In this paper, the high-precision light curves of $Kepler$ target KIC 5950759 are analyzed. The Fourier analysis of the long cadence light curve reveals 3 independent frequencies. Two of them are main pulsation modes: F0 = 14.221373(21) $\rm{d^{-1}}$ and F1 = 18.337249(44) $\rm{d^{-1}}$. The third independent frequency $f_m$ = 0.3193 d$^{-1}$ is found in long cadence data with a signal-to-noise ratio of 6.2. A weak modulation of $f_m$ to F0 and F1 modes (triplet structures centred on F0 and F1) are detected both in long and short cadence data. This is the first detection of the modulation effect in a double-mode HADS star. The most possible cause of the modulation effect in the light curves is amplitude modulation with the star's rotation frequency of 0.3193 d$^{-1}$. The preliminary analysis suggests that KIC 5950759 is in the bottom of the HADS instability strip and likely situated in the main sequence. Spectroscopic observations are necessary to verify the true nature of the modulation terms.
[7]  oai:arXiv.org:1808.06064  [pdf] - 1735552
Visible astro-comb filtered by a passively-stabilized Fabry-Perot cavity
Comments: 5 pages, 5 figures
Submitted: 2018-08-18
We demonstrate a compact 29.3 GHz visible astro-comb covering the spectrum from 560nm to 700nm. A 837 MHz Yb:fiber laser frequency comb phase locked to a Rb clock served as the seed comb to ensure the frequency stability and high side mode suppression ratio. After the visible super-continuum generation, a cavity-length-fixed Fabry-Perot cavity made by ultra-low expansion glass was utilized to filter the comb teeth for eliminating the rapid active dithering. The mirrors were home-made complementary chirped mirrors pair with zero dispersion and high reflection to guarantee no mode skipping. These filtered comb teeth were clearly resolved in an astronomical spectrograph of 49,000 resolution, exhibiting sharp linetype, zero noise floor, and uniform exposure amplitude.
[8]  oai:arXiv.org:1808.01892  [pdf] - 1728123
PTOLEMY: A Proposal for Thermal Relic Detection of Massive Neutrinos and Directional Detection of MeV Dark Matter
Comments:
Submitted: 2018-08-06
We propose to achieve the proof-of-principle of the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Each of the technological challenges described in [1,2] will be targeted and hopefully solved by the use of the latest experimental developments and profiting from the low background environment provided by the LNGS underground site. The first phase will focus on the graphene technology for a tritium target and the demonstration of TES microcalorimetry with an energy resolution of better than 0.05 eV for low energy electrons. These technologies will be evaluated using the PTOLEMY prototype, proposed for underground installation, using precision HV controls to step down the kinematic energy of endpoint electrons to match the calorimeter dynamic range and rate capabilities. The second phase will produce a novel implementation of the EM filter that is scalable to the full target size and which demonstrates intrinsic triggering capability for selecting endpoint electrons. Concurrent with the CNB program, we plan to exploit and develop the unique properties of graphene to implement an intermediate program for direct directional detection of MeV dark matter [3,4]. This program will evaluate the radio-purity and scalability of the graphene fabrication process with the goal of using recently identified ultra-high radio-purity CO2 sources. The direct detection of the CNB is a snapshot of early universe dynamics recorded by the thermal relic neutrino yield taken at a time that predates the epochs of Big Bang Nucleosynthesis, the Cosmic Microwave Background and the recession of galaxies (Hubble Expansion). Big Bang neutrinos are believed to have a central role in the evolution of the Universe and a direct measurement with PTOLEMY will unequivocally establish the extent to which these predictions match present-day neutrino densities.
[9]  oai:arXiv.org:1601.04417  [pdf] - 1374274
A Pair of Giant Planets around the Evolved Intermediate-Mass Star HD 47366: Multiple Circular Orbits or a Mutually Retrograde Configuration
Comments: 11 pages, 9 figures, accepted for publication in ApJ
Submitted: 2016-01-18
We report the detection of a double planetary system around the evolved intermediate-mass star HD 47366 from precise radial-velocity measurements at Okayama Astrophysical Observatory, Xinglong Station, and Australian Astronomical Observatory. The star is a K1 giant with a mass of 1.81+-0.13M_sun, a radius of 7.30+-0.33R_sun, and solar metallicity. The planetary system is composed of two giant planets with minimum mass of 1.75^{+0.20}_{-0.17}Mjup and 1.86^{+0.16}_{-0.15}Mjup, orbital period of 363.3^{+2.5}_{-2.4} d and 684.7^{+5.0}_{-4.9} d, and eccentricity of 0.089^{+0.079}_{-0.060} and 0.278^{+0.067}_{-0.094}, respectively, which are derived by a double Keplerian orbital fit to the radial-velocity data. The system adds to the population of multi-giant-planet systems with relatively small orbital separations, which are preferentially found around evolved intermediate-mass stars. Dynamical stability analysis for the system revealed, however, that the best-fit orbits are unstable in the case of a prograde configuration. The system could be stable if the planets were in 2:1 mean-motion resonance, but this is less likely considering the observed period ratio and eccentricity. A present possible scenario for the system is that both of the planets have nearly circular orbits, namely the eccentricity of the outer planet is less than ~0.15, which is just within 1.4sigma of the best-fit value, or the planets are in a mutually retrograde configuration with a mutual orbital inclination larger than 160 degree.
[10]  oai:arXiv.org:1503.03757  [pdf] - 957085
Wide-Field InfrarRed Survey Telescope-Astrophysics Focused Telescope Assets WFIRST-AFTA 2015 Report
Comments: This report describes the 2014 study by the Science Definition Team of the Wide-Field Infrared Survey Telescope mission. 319 pages; corrected a misspelled name in the authors list and a typo in the abstract
Submitted: 2015-03-12, last modified: 2015-03-13
This report describes the 2014 study by the Science Definition Team (SDT) of the Wide-Field Infrared Survey Telescope (WFIRST) mission. It is a space observatory that will address the most compelling scientific problems in dark energy, exoplanets and general astrophysics using a 2.4-m telescope with a wide-field infrared instrument and an optical coronagraph. The Astro2010 Decadal Survey recommended a Wide Field Infrared Survey Telescope as its top priority for a new large space mission. As conceived by the decadal survey, WFIRST would carry out a dark energy science program, a microlensing program to determine the demographics of exoplanets, and a general observing program utilizing its ultra wide field. In October 2012, NASA chartered a Science Definition Team (SDT) to produce, in collaboration with the WFIRST Study Office at GSFC and the Program Office at JPL, a Design Reference Mission (DRM) for an implementation of WFIRST using one of the 2.4-m, Hubble-quality telescope assemblies recently made available to NASA. This DRM builds on the work of the earlier WFIRST SDT, reported by Green et al. (2012) and the previous WFIRST-2.4 DRM, reported by Spergel et. (2013). The 2.4-m primary mirror enables a mission with greater sensitivity and higher angular resolution than the 1.3-m and 1.1-m designs considered previously, increasing both the science return of the primary surveys and the capabilities of WFIRST as a Guest Observer facility. The addition of an on-axis coronagraphic instrument to the baseline design enables imaging and spectroscopic studies of planets around nearby stars.
[11]  oai:arXiv.org:1307.2265  [pdf] - 1172577
Enzo: An Adaptive Mesh Refinement Code for Astrophysics
Comments: 60 pages, 22 figures, submitted to ApJS. The code is available at http://enzo-project.org
Submitted: 2013-07-08
This paper describes the open-source code Enzo, which uses block-structured adaptive mesh refinement to provide high spatial and temporal resolution for modeling astrophysical fluid flows. The code is Cartesian, can be run in 1, 2, and 3 dimensions, and supports a wide variety of physics including hydrodynamics, ideal and non-ideal magnetohydrodynamics, N-body dynamics (and, more broadly, self-gravity of fluids and particles), primordial gas chemistry, optically-thin radiative cooling of primordial and metal-enriched plasmas (as well as some optically-thick cooling models), radiation transport, cosmological expansion, and models for star formation and feedback in a cosmological context. In addition to explaining the algorithms implemented, we present solutions for a wide range of test problems, demonstrate the code's parallel performance, and discuss the Enzo collaboration's code development methodology.
[12]  oai:arXiv.org:1110.5970  [pdf] - 1085184
Could bright gamma-ray burst optical transients have been recorded historically?
Comments: 9 pages, 3 figures
Submitted: 2011-10-26
The brightest optical flash from a gamma-ray burst (GRB) was, briefly, a naked-eye object. Several other GRBs have produced optical transients only slightly fainter. We argue that, based upon the recently accumulated data from hundreds of GRB transients, many such optical events should have been visible to the unaided eye in the course of human history. The most likely repositories of such observations are historical records from the Orient, and we have located and discuss a number of candidates. We also consider the value of such observations, should any very likely ones be uncovered, to modern astrophysics.