We present the data analysis pipeline, commissioning observations and initial results from the GREENBURST fast radio burst (FRB) detection system on the Robert C. Byrd Green Bank Telescope (GBT) previously described by Surnis et al. which uses the 21~cm receiver observing commensally with other projects. The pipeline makes use of a state-of-the-art deep learning classifier to winnow down the very large number of false positive single-pulse candidates that mostly result from radio frequency interference. In our observations totalling 156.5 days so far, we have detected individual pulses from 20 known radio pulsars which provide an excellent verification of the system performance. We also demonstrate, through blind injection analyses, that our pipeline is complete down to a signal-to-noise threshold of 12. Depending on the observing mode, this translates to peak flux sensitivities in the range 0.14--0.89~Jy. Although no FRBs have been detected to date, we have used our results to update the analysis of Lawrence et al. to constrain the FRB all-sky rate to be $1140^{+200}_{-180}$ per day above a peak flux density of 1~Jy. We also constrain the source count index $\alpha=0.83\pm0.06$ which indicates that the source count distribution is substantially flatter than expected from a Euclidean distribution of standard candles (where $\alpha=1.5$). We discuss this result in the context of the FRB redshift and luminosity distributions. Finally, we make predictions for detection rates with GREENBURST, as well as other ongoing and planned FRB experiments.

The Search for Extraterrestrial Intelligence (SETI) attempts to address the possibility of the presence of technological civilizations beyond the Earth. Benefiting from high sensitivity, large sky coverage, an innovative feed cabin for China's Five-hundred-meter Aperture Spherical radio Telescope (FAST), we performed the SETI first observations with FAST's newly commisioned 19-beam receiver; we report preliminary results in this paper. Using the data stream produced by the SERENDIP VI realtime multibeam SETI spectrometer installed at FAST, as well as its off-line data processing pipelines, we identify and remove four kinds of radio frequency interference(RFI): zone, broadband, multi-beam, and drifting, utilizing the Nebula SETI software pipeline combined with machine learning algorithms. After RFI mitigation, the Nebula pipeline identifies and ranks interesting narrow band candidate ET signals, scoring candidates by the number of times candidate signals have been seen at roughly the same sky position and same frequency, signal strength, proximity to a nearby star or object of interest, along with several other scoring criteria. We show four example candidates groups that demonstrate these RFI mitigation and candidate selection. This preliminary testing on FAST data helps to validate our SETI instrumentation techniques as well as our data processing pipeline.

The discovery of ubiquitous habitable extrasolar planets, combined with revolutionary advances in instrumentation and observational capabilities, has ushered in a renaissance in the search for extra-terrestrial intelligence (SETI). Large scale SETI activities are now underway at numerous international facilities. The Five-hundred-meter Aperture Spherical radio Telescope (FAST) is the largest single-aperture radio telescope in the world, well positioned to conduct sensitive searches for radio emission indicative of exo-intelligence. SETI is one of the five key science goals specified in the original FAST project plan. A collaboration with the Breakthrough Listen Initiative has been initiated in 2016 with a joint statement signed both by Dr. Jun Yan, the then director of the National Astronomical Observatories, Chinese Academy of Sciences (NAOC), and Dr. Peter Worden, the Chairman of the Breakthrough Prize Foundation. In this paper, we highlight some of the unique features of FAST that will allow for novel SETI observations. We identify and describe three different signal types indicative of a technological source, namely, narrow-band, wide-band artificially dispersed, and modulated signals. We here propose observations with FAST to achieve sensitivities never before explored.

Breakthrough Listen (BL) is a ten-year initiative to search for signatures of technologically capable life beyond Earth via radio and optical observations of the local Universe. A core part of the BL program is a comprehensive survey of 1702 nearby stars at radio wavelengths (1-10 GHz). Here, we report on observations with the 64-m CSIRO Parkes radio telescope in New South Wales, Australia, and the 100-m Robert C. Byrd Green Bank radio telescope in West Virginia, USA. Over 2016 January to 2019 March, a sample of 1138 stars was observed at Green Bank using the 1.10-1.90 GHz and 1.80-2.80 GHz receivers, and 189 stars were observed with Parkes over 2.60-3.45 GHz. We searched these data for the presence of engineered signals with Doppler-acceleration drift rates between -4 to 4 Hz/s. Here, we detail our data analysis techniques and provide examples of detected events. After excluding events with characteristics consistent with terrestrial radio interference, we are left with zero candidates. Given the sensitivity of our observations, we can put an upper limit on the power of potential radio transmitters at these frequencies at 2x10^12 W, and 9x10^12 W for GBT and Parkes respectively. These observations constitute the most comprehensive search over 1.10-3.45 GHz for technosignatures to date. All data products, totalling ~219 TB, are available for download as part of the first BL data release (DR1), as described in a companion paper (Lebofsky et. al., 2019)

Breakthrough Listen is the most comprehensive and sensitive search for extraterrestrial intelligence (SETI) to date, employing a collection of international observational facilities including both radio and optical telescopes. During the first three years of the Listen program, thousands of targets have been observed with the Green Bank Telescope (GBT), Parkes Telescope and Automated Planet Finder. At GBT and Parkes, observations have been performed ranging from 700 MHz to 26 GHz, with raw data volumes averaging over 1PB / day. A pseudo-real time software spectroscopy suite is used to produce multi-resolution spectrograms amounting to approximately 400 GB hr^-1 GHz^-1 beam^-1. For certain targets, raw baseband voltage data is also preserved. Observations with the Automated Planet Finder produce both 2-dimensional and 1-dimensional high resolution (R~10^5) echelle spectral data. Although the primary purpose of Listen data acquisition is for SETI, a range of secondary science has also been performed with these data, including studies of fast radio bursts. Other current and potential research topics include spectral line studies, searches for certain kinds of dark matter, probes of interstellar scattering, pulsar searches, radio transient searches and investigations of stellar activity. Listen data are also being used in the development of algorithms, including machine learning approaches to modulation scheme classification and outlier detection, that have wide applicability not just for astronomical research but for a broad range of science and engineering. In this paper, we describe the hardware and software pipeline used for collection, reduction, archival, and public dissemination of Listen data. We describe the data formats and tools, and present Breakthrough Listen Data Release 1.0 (BLDR 1.0), a defined set of publicly-available raw and reduced data totalling 1 PB.

The discovery of the ubiquity of habitable extrasolar planets, combined with revolutionary advances in instrumentation and observational capabilities, have ushered in a renaissance in the millenia-old quest to answer our most profound question about the Universe and our place within it - Are we alone? The Breakthrough Listen Initiative, announced in July 2015 as a 10-year 100M USD program, is the most comprehensive effort in history to quantify the distribution of advanced, technologically capable life in the universe. In this white paper, we outline the status of the on-going observing campaign with our primary observing facilities, as well as planned activities with these instruments over the next few years. We also list collaborative facilities which will conduct searches for technosignatures in either primary observing mode, or commensally. We highlight some of the novel analysis techniques we are bringing to bear on multi-petabyte data sets, including machine learning tools we are deploying to search for a broader range of technosignatures than was previously possible.

The digital correlator is a crucial element in a modern radio telescope. In this paper we describe a scalable design of the correlator system for the Tianlai pathfinder array, which is an experiment dedicated to test the key technologies for conducting 21cm intensity mapping survey. The correlator is of the FX design, which firstly performs Fast Fourier Transform (FFT) including Polyphase Filter Bank (PFB) computation using a Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) Reconfigurable Open Architecture Computing Hardware-2 (ROACH2) board, then computes cross-correlations using Graphical Processing Units (GPUs). The design has been tested both in laboratory and in actual observation.

We describe the design and deployment of GREENBURST, a commensal Fast Radio Burst (FRB) search system at the Green Bank Telescope. GREENBURST uses the dedicated L-band receiver tap to search over the 960$-$1920 MHz frequency range for pulses with dispersion measures out to $10^4$ pc cm$^{-3}$. Due to its unique design, GREENBURST will obtain data even when the L-band receiver is not being used for scheduled observing. This makes it a sensitive single pixel detector capable of reaching deeper in the radio sky. While single pulses from Galactic pulsars and rotating radio transients will be detectable in our observations, and will form part of the database we archive, the primary goal is to detect and study FRBs. Based on recent determinations of the all-sky rate, we predict that the system will detect approximately one FRB for every 2$-$3 months of continuous operation. The high sensitivity of GREENBURST means that it will also be able to probe the slope of the FRB source function, which is currently uncertain in this observing band.

Here, we report on the detection and verification of Fast Radio Burst FRB 180301, which occurred on UTC 2018 March 1 during the Breakthrough Listen observations with the Parkes telescope. Full-polarization voltage data of the detection were captured--a first for non-repeating FRBs--allowing for coherent de-dispersion and additional verification tests. The coherently de-dispersed dynamic spectrum of FRB 180301 shows complex, polarized frequency structure over a small fractional bandwidth. As FRB 180301 was detected close to the geosynchronous satellite band during a time of known 1-2 GHz satellite transmissions, we consider whether the burst was due to radio interference emitted or reflected from an orbiting object. Based on the preponderance of our verification tests, we find that FRB 180301 is likely of astrophysical origin, but caution that anthropogenic sources cannot conclusively be ruled out.

Boyajian' s Star (KIC 8462852) has received significant attention due to its unusual periodic brightness fluctuations detected by the Kepler Spacecraft and subsequent ground based observations. Possible explanations for the dips in the photometric measurements include interstellar or circumstellar dust, and it has been speculated that an artificial megastructure could be responsible. We analyze 177 high-resolution spectra of Boyajian's Star in an effort to detect potential laser signals from extraterrestrial civilizations. The spectra were obtained by the Lick Observatory's Automated Planet Finder telescope as part of the Breakthrough Listen Project, and cover the wavelength range of visible light from 374 to 970 nm. We calculate that the APF would be capable of detecting lasers of power greater than approximately 24 MW at the distance of Boyajian's Star, d = 1470 ly. The top candidates from the analysis can all be explained as either cosmic ray hits, stellar emission lines or atmospheric air glow emission lines.

Breakthrough Listen is a ten-year initiative to search for signatures of technologies created by extraterrestrial civilizations at radio and optical wavelengths. Here, we detail the digital data recording system deployed for Breakthrough Listen observations at the 64-m aperture CSIRO Parkes Telescope in New South Wales, Australia. The recording system currently implements two recording modes: a dual-polarization, 1.125 GHz bandwidth mode for single beam observations, and a 26-input, 308-MHz bandwidth mode for the 21-cm multibeam receiver. The system is also designed to support a 3 GHz single-beam mode for the forthcoming Parkes ultra-wideband feed. In this paper, we present details of the system architecture, provide an overview of hardware and software, and present initial performance results.

We present overall specifications and science goals for a new optical and near-infrared (350 - 1650 nm) instrument designed to greatly enlarge the current Search for Extraterrestrial Intelligence (SETI) phase space. The Pulsed All-sky Near-infrared Optical SETI (PANOSETI) observatory will be a dedicated SETI facility that aims to increase sky area searched, wavelengths covered, number of stellar systems observed, and duration of time monitored. This observatory will offer an "all-observable-sky" optical and wide-field near-infrared pulsed technosignature and astrophysical transient search that is capable of surveying the entire northern hemisphere. The final implemented experiment will search for transient pulsed signals occurring between nanosecond to second time scales. The optical component will cover a solid angle 2.5 million times larger than current SETI targeted searches, while also increasing dwell time per source by a factor of 10,000. The PANOSETI instrument will be the first near-infrared wide-field SETI program ever conducted. The rapid technological advance of fast-response optical and near-infrared detector arrays (i.e., Multi-Pixel Photon Counting; MPPC) make this program now feasible. The PANOSETI instrument design uses innovative domes that house 100 Fresnel lenses, which will search concurrently over 8,000 square degrees for transient signals (see Maire et al. and Cosens et al., this conference). In this paper, we describe the overall instrumental specifications and science objectives for PANOSETI.

We propose a novel instrument design to greatly expand the current optical and near-infrared SETI search parameter space by monitoring the entire observable sky during all observable time. This instrument is aimed to search for technosignatures by means of detecting nano- to micro-second light pulses that could have been emitted, for instance, for the purpose of interstellar communications or energy transfer. We present an instrument conceptual design based upon an assembly of 198 refracting 0.5-m telescopes tessellating two geodesic domes. This design produces a regular layout of hexagonal collecting apertures that optimizes the instrument footprint, aperture diameter, instrument sensitivity and total field-of-view coverage. We also present the optical performance of some Fresnel lenses envisaged to develop a dedicated panoramic SETI (PANOSETI) observatory that will dramatically increase sky-area searched (pi steradians per dome), wavelength range covered, number of stellar systems observed, interstellar space examined and duration of time monitored with respect to previous optical and near-infrared technosignature finders.

The Pulsed All-sky Near-infrared Optical Search for ExtraTerrestrial Intelligence (PANOSETI) is an instrument program that aims to search for fast transient signals (nano-second to seconds) of artificial or astrophysical origin. The PANOSETI instrument objective is to sample the entire observable sky during all observable time at optical and near-infrared wavelengths over 300 - 1650 nm$^1$. The PANOSETI instrument is designed with a number of modular telescope units using Fresnel lenses ($\sim$0.5m) arranged on two geodesic domes in order to maximize sky coverage$^2$. We present the prototype design and tests of these modular Fresnel telescope units. This consists of the design of mechanical components such as the lens mounting and module frame. One of the most important goals of the modules is to maintain the characteristics of the Fresnel lens under a variety of operating conditions. We discuss how we account for a range of operating temperatures, humidity, and module orientations in our design in order to minimize undesirable changes to our focal length or angular resolution.

The Large-Aperture Experiment to Detect the Dark Age (LEDA) was designed to detect the predicted O(100)mK sky-averaged absorption of the Cosmic Microwave Background by Hydrogen in the neutral pre- and intergalactic medium just after the cosmological Dark Age. The spectral signature would be associated with emergence of a diffuse Ly$\alpha$ background from starlight during 'Cosmic Dawn'. Recently, Bowman et al. (2018) have reported detection of this predicted absorption feature, with an unexpectedly large amplitude of 530 mK, centered at 78 MHz. Verification of this result by an independent experiment, such as LEDA, is pressing. In this paper, we detail design and characterization of the LEDA radiometer systems, and a first-generation pipeline that instantiates a signal path model. Sited at the Owens Valley Radio Observatory Long Wavelength Array, LEDA systems include the station correlator, five well-separated redundant dual polarization radiometers and backend electronics. The radiometers deliver a 30-85MHz band (16<z<34) and operate as part of the larger interferometric array, for purposes ultimately of in situ calibration. Here, we report on the LEDA system design, calibration approach, and progress in characterization as of January 2016. The LEDA systems are currently being modified to improve performance near 78 MHz in order to verify the purported absorption feature.

We report on a search for engineered signals from a sample of 692 nearby stars using the Robert C. Byrd Green Bank Telescope, undertaken as part of the $Breakthrough~Listen~Initiative$ search for extraterrestrial intelligence. Observations were made over 1.1$-$1.9 GHz (L band), with three sets of five-minute observations of the 692 primary targets, interspersed with five-minute observations of secondary targets. By comparing the "ON" and "OFF" observations we are able to identify terrestrial interference and place limits on the presence of engineered signals from putative extraterrestrial civilizations inhabiting the environs of the target stars. During the analysis, eleven events passed our thresholding algorithm, but a detailed analysis of their properties indicates they are consistent with known examples of anthropogenic radio frequency interference. We conclude that, at the time of our observations, none of the observed systems host high-duty-cycle radio transmitters emitting between 1.1 and 1.9 GHz with an Equivalent Isotropic Radiated Power of $\sim10^{13}$ W, which is readily achievable by our own civilization. Our results suggest that fewer than $\sim$ 0.1$\%$ of the stellar systems within 50 pc possess the type of transmitters searched in this survey.

We report the first detections of the repeating fast radio burst source FRB 121102 above 5.2 GHz. Observations were performed using the 4$-$8 GHz receiver of the Robert C. Byrd Green Bank Telescope with the Breakthrough Listen digital backend. We present the spectral, temporal and polarization properties of 21 bursts detected within the first 60 minutes of a total 6-hour observations. These observations comprise the highest burst density yet reported in the literature, with 18 bursts being detected in the first 30 minutes. A few bursts clearly show temporal sub-structures with distinct spectral properties. These sub-structures superimpose to provide enhanced peak signal-to-noise ratio at higher trial dispersion measures. Broad features occur in $\sim 1$ GHz wide subbands that typically differ in peak frequency between bursts within the band. Finer-scale structures ($\sim 10-50$ MHz) within these bursts are consistent with that expected from Galactic diffractive interstellar scintillation. The bursts exhibit nearly 100% linear polarization, and a large average rotation measure of 9.359$\pm$0.012 $\times$ 10$^{\rm 4}$ rad m$^{\rm -2}$ (in the observer's frame). No circular polarization was found for any burst. We measure an approximately constant polarization position angle in the 13 brightest bursts. The peak flux densities of the reported bursts have average values (0.2$\pm$0.1 Jy), similar to those seen at lower frequencies ($<3$ GHz), while the average burst widths (0.64$\pm$0.46 ms) are relatively narrower.

ALFABURST has been searching for Fast Radio Bursts (FRBs) commensally with other projects using the Arecibo L-band Feed Array (ALFA) receiver at the Arecibo Observatory since July 2015. We describe the observing system and report on the non-detection of any FRBs from that time until August 2017 for a total observing time of 518 hours. With current FRB rate models, along with measurements of telescope sensitivity and beam size, we estimate that this survey probed redshifts out to about 3.4 with an effective survey volume of around 600,000 Mpc$^3$. Based on this, we would expect, at the 99% confidence level, to see at most two FRBs. We discuss the implications of this non-detection in the context of results from other telescopes and the limitation of our search pipeline. During the survey, single pulses from 17 known pulsars were detected. We also report the discovery of a Galactic radio transient with a pulse width of 3 ms and dispersion measure of 281 pc cm$^{-3}$, which was detected while the telescope was slewing between fields.

Here, we present initial results from the ALFABURST radio transient survey, which is currently running in a commensal mode with the ALFA receiver at the Arecibo telescope. We observed for a total of 1400 hours and have detected single pulses from known pulsars but did not detect any FRBs. The non-detection of FRBs is consistent with the current FRB sky rates.

We undertook observations with the Green Bank Telescope, simultaneously with the 300m telescope in Arecibo, as a follow-up of a possible flare of radio emission from Ross 128. We report here the non-detections from the GBT observations in C band (4-8 GHz), as well as non-detections in archival data at L band (1.1-1.9 GHz). We suggest that a likely scenario is that the emission comes from one or more satellites passing through the same region of the sky.

The Breakthrough Listen Initiative is undertaking a comprehensive search for radio and optical signatures from extraterrestrial civilizations. An integral component of the project is the design and implementation of wide-bandwidth data recorder and signal processing systems. The capabilities of these systems, particularly at radio frequencies, directly determine survey speed; further, given a fixed observing time and spectral coverage, they determine sensitivity as well. Here, we detail the Breakthrough Listen wide-bandwidth data recording system deployed at the 100-m aperture Robert C. Byrd Green Bank Telescope. The system digitizes up to 6 GHz of bandwidth at 8 bits for both polarizations, storing the resultant 24 GB/s of data to disk. This system is among the highest data rate baseband recording systems in use in radio astronomy. A future system expansion will double recording capacity, to achieve a total Nyquist bandwidth of 12 GHz in two polarizations. In this paper, we present details of the system architecture, along with salient configuration and disk-write optimizations used to achieve high-throughput data capture on commodity compute servers and consumer-class hard disk drives.

We present the target selection for the Breakthrough Listen search for extraterrestrial intelligence during the first year of observations at the Green Bank Telescope, Parkes Telescope and Automated Planet Finder. On the way to observing 1,000,000 nearby stars in search of technological signals, we present three main sets of objects we plan to observe in addition to a smaller sample of exotica. We choose the 60 nearest stars, all within 5.1 pc from the sun. Such nearby stars offer the potential to observe faint radio signals from transmitters having a power similar to those on Earth. We add a list of 1649 stars drawn from the Hipparcos catalog that span the Hertzprung-Russell diagram, including all spectral types along the main sequence, subgiants, and giant stars. This sample offers diversity and inclusion of all stellar types, but with thoughtful limits and due attention to main sequence stars. Our targets also include 123 nearby galaxies composed of a "morphological-type-complete" sample of the nearest spirals, ellipticals, dwarf spherioidals, and irregulars. While their great distances hamper the detection of technological electromagnetic radiation, galaxies offer the opportunity to observe billions of stars simultaneously and to sample the bright end of the technological luminosity function. We will also use the Green Bank and Parkes telescopes to survey the plane and central bulge of the Milky Way. Finally, the complete target list includes several classes of exotica, including white dwarfs, brown dwarfs, black holes, neutron stars, and asteroids in our Solar System.

Radio astronomy has traditionally depended on observatories allocating time to observers for exclusive use of their telescopes. The disadvantage of this scheme is that the data thus collected is rarely used for other astronomy applications, and in many cases, is unsuitable. For example, properly calibrated pulsar search data can, with some reduction, be used for spectral line surveys. A backend that supports plugging in multiple applications to a telescope to perform commensal data analysis will vastly increase the science throughput of the facility. In this paper, we present 'SETIBURST', a robotic, commensal, realtime multi-science backend for the 305-m Arecibo Telescope. The system uses the 1.4 GHz, seven-beam Arecibo L-band Feed Array (ALFA) receiver whenever it is operated. SETIBURST currently supports two applications: SERENDIP VI, a SETI spectrometer that is conducting a search for signs of technological life, and ALFABURST, a fast transient search system that is conducting a survey of fast radio bursts (FRBs). Based on the FRB event rate and the expected usage of ALFA, we expect 0-5 FRB detections over the coming year. SETIBURST also provides the option of plugging in more applications. We outline the motivation for our instrumentation scheme and the scientific motivation of the two surveys, along with their descriptions and related discussions.

The Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) has been working for a decade to reduce the time and cost of designing, building and deploying new digital radio-astronomy instruments. Today, CASPER open-source technology powers over 45 scientific instruments worldwide, and is used by scientists and engineers at dozens of academic institutions. In this paper we catalog the current offerings of the CASPER collaboration, and instruments past and present built by CASPER users and developers. We describe the ongoing state of software development, as CASPER looks to support a broader range of programming environments and hardware and ensure compatibility with the latest vendor tools.

We employed the SERENDIP III system with the Arecibo radio telescope to search for possible artificial extraterrestrial signals. Over the four years of this search we covered 93% of the sky observable at Arecibo at least once and 44% of the sky five times or more with a sensitivity of ~3E-25 W/m2. The data were sent to a 4 million channel spectrum analyzer. Information was obtained from over 1E+14 independent data points and the results were then analyzed via a suite of pattern detection algorithms to identify narrow band spectral power peaks that were not readily identifiable as the product of human activity. We separately selected data coincident with interesting nearby G dwarf stars that were encountered by chance in our sky survey for suggestions of excess power peaks. The peak power distributions in both these data sets were consistent with random noise. We report upper limits on possible signals from the stars investigated and provide examples of the most interesting candidates identified in the sky survey. This paper was intended for publication in 2000 and is presented here without change from the version submitted to ApJS in 2000.

Fast Radio Bursts (FRBs) are apparently one-time, relatively bright radio pulses that have been observed in recent years. The origin of FRBs is currently unknown and many instruments are being built to detect more of these bursts to better characterize their physical properties and identify the source population. ALFABURST is one such instrument. ALFABURST takes advantage of the 7-beam Arecibo L-band Feed Array (ALFA) receiver on the 305-m Arecibo Radio Telescope in Puerto Rico, to detect FRBs in real-time at L-band (1.4 GHz). We present the results of recent on-sky tests and observations undertaken during the commissioning phase of the instrument. ALFABURST is now available for commensal observations with other ALFA projects.

Fast radio bursts (FRBs) constitute an emerging class of fast radio transient whose origin continues to be a mystery. Realizing the importance of increasing coverage of the search parameter space, we have designed, built, and deployed a realtime monitor for FRBs at the 305-m Arecibo radio telescope. Named 'ALFABURST', it is a commensal instrument that is triggered whenever the 1.4 GHz seven-beam Arecibo $L$-Band Feed Array (ALFA) receiver commences operation. The ongoing commensal survey we are conducting using ALFABURST has an instantaneous field of view of 0.02 sq. deg. within the FWHM of the beams, with the realtime software configurable to use up to 300 MHz of bandwidth. We search for FRBs with dispersion measure up to 2560 cm$^{-3}$ pc and pulse widths ranging from 0.128 ms to 16.384 ms. Commissioning observations performed over the past few months have demonstrated the capability of the instrument in detecting single pulses from known pulsars. In this paper, I describe the instrument and the associated survey.

A "large-N" correlator that makes use of Field Programmable Gate Arrays and Graphics Processing Units has been deployed as the digital signal processing system for the Long Wavelength Array station at Owens Valley Radio Observatory (LWA-OV), to enable the Large Aperture Experiment to Detect the Dark Ages (LEDA). The system samples a ~100MHz baseband and processes signals from 512 antennas (256 dual polarization) over a ~58MHz instantaneous sub-band, achieving 16.8Tops/s and 0.236 Tbit/s throughput in a 9kW envelope and single rack footprint. The output data rate is 260MB/s for 9 second time averaging of cross-power and 1 second averaging of total-power data. At deployment, the LWA-OV correlator was the largest in production in terms of N and is the third largest in terms of complex multiply accumulations, after the Very Large Array and Atacama Large Millimeter Array. The correlator's comparatively fast development time and low cost establish a practical foundation for the scalability of a modular, heterogeneous, computing architecture.

The vast collecting area of the Square Kilometre Array (SKA), harnessed by sensitive receivers, flexible digital electronics and increased computational capacity, could permit the most sensitive and exhaustive search for technologically-produced radio emission from advanced extraterrestrial intelligence (SETI) ever performed. For example, SKA1-MID will be capable of detecting a source roughly analogous to terrestrial high-power radars (e.g. air route surveillance or ballistic missile warning radars, EIRP (EIRP = equivalent isotropic radiated power, ~10^17 erg sec^-1) at 10 pc in less than 15 minutes, and with a modest four beam SETI observing system could, in one minute, search every star in the primary beam out to ~100 pc for radio emission comparable to that emitted by the Arecibo Planetary Radar (EIRP ~2 x 10^20 erg sec^-1). The flexibility of the signal detection systems used for SETI searches with the SKA will allow new algorithms to be employed that will provide sensitivity to a much wider variety of signal types than previously searched for. Here we discuss the astrobiological and astrophysical motivations for radio SETI and describe how the technical capabilities of the SKA will explore the radio SETI parameter space. We detail several conceivable SETI experimental programs on all components of SKA1, including commensal, primary-user, targeted and survey programs and project the enhancements to them possible with SKA2. We also discuss target selection criteria for these programs, and in the case of commensal observing, how the varied use cases of other primary observers can be used to full advantage for SETI.

The Graphics Processing Unit (GPU) has become an integral part of astronomical instrumentation, enabling high-performance online data reduction and accelerated online signal processing. In this paper, we describe a wide-band reconfigurable spectrometer built using an off-the-shelf GPU card. This spectrometer, when configured as a polyphase filter bank (PFB), supports a dual-polarization bandwidth of up to 1.1 GHz (or a single-polarization bandwidth of up to 2.2 GHz) on the latest generation of GPUs. On the other hand, when configured as a direct FFT, the spectrometer supports a dual-polarization bandwidth of up to 1.4 GHz (or a single-polarization bandwidth of up to 2.8 GHz).

A number of experiments are currently working towards a measurement of the 21 cm signal from the Epoch of Reionization. Whether or not these experiments deliver a detection of cosmological emission, their limited sensitivity will prevent them from providing detailed information about the astrophysics of reionization. In this work, we consider what types of measurements will be enabled by a next-generation of larger 21 cm EoR telescopes. To calculate the type of constraints that will be possible with such arrays, we use simple models for the instrument, foreground emission, and the reionization history. We focus primarily on an instrument modeled after the $\sim 0.1~\rm{km}^2$ collecting area Hydrogen Epoch of Reionization Array (HERA) concept design, and parameterize the uncertainties with regard to foreground emission by considering different limits to the recently described "wedge" footprint in k-space. Uncertainties in the reionization history are accounted for using a series of simulations which vary the ionizing efficiency and minimum virial temperature of the galaxies responsible for reionization, as well as the mean free path of ionizing photons through the IGM. Given various combinations of models, we consider the significance of the possible power spectrum detections, the ability to trace the power spectrum evolution versus redshift, the detectability of salient power spectrum features, and the achievable level of quantitative constraints on astrophysical parameters. Ultimately, we find that $0.1~\rm{km}^2$ of collecting area is enough to ensure a very high significance ($\gtrsim30\sigma$) detection of the reionization power spectrum in even the most pessimistic scenarios. This sensitivity should allow for meaningful constraints on the reionization history and astrophysical parameters, especially if foreground subtraction techniques can be improved and successfully implemented.

It has been speculated that technological civilizations evolve along an energy consumption scale first formulated by Kardashev, ranging from human-like civilizations that consume energy at a rate of $\sim 10^{19}$ erg s$^{-1}$ to hypothetical highly advanced civilizations that can consume $\sim 10^{44}$ erg s$^{-1}$. Since the transmission power of a beacon a civilization can build depends on the energy it possesses, to make it bright enough to be seen across the Galaxy would require high technological advancement. In this paper, we discuss the possibility of a civilization using naturally-occurring radio transmitters -- specifically, radio pulsars -- to overcome the Kardashev limit of their developmental stage and transmit super-Kardashev power. This is achieved by the use of a modulator situated around a pulsar, that modulates the pulsar signal, encoding information onto its natural emission. We discuss a simple modulation model using pulse nulling and considerations for detecting such a signal. We find that a pulsar with a nulling modulator will exhibit an excess of thermal emission peaking in the ultraviolet during its null phases, revealing the existence of a modulator.

We are designing and constructing a new SETI (Search for Extraterrestrial Intelligence) instrument to search for direct evidence of interstellar communications via pulsed laser signals at near-infrared wavelengths. The new instrument design builds upon our past optical SETI experiences, and is the first step toward a new, more versatile and sophisticated generation of very fast optical and near-infrared pulse search devices. We present our instrumental design by giving an overview of the opto-mechanical design, detector selection and characterization, signal processing, and integration procedure. This project makes use of near-infrared (950-1650 nm) discrete amplification Avalanche Photodiodes (APD) that have greater than 1 GHz bandwidths with low noise characteristics and moderate gain (~10^4). We have investigated the use of single versus multiple detectors in our instrument (see Maire et al., this conference), and have optimized the system to have both high sensitivity and low false coincidence rates. Our design is optimized for use behind a 1m telescope and includes an optical camera for acquisition and guiding. A goal is to make our instrument relatively economical and easy to duplicate. We describe our observational setup and our initial search strategies for SETI targets, and for potential interesting compact astrophysical objects.

A Search for Extraterrestrial Life (SETI), based on the possibility of interstellar communication via laser signals, is being designed to extend the search into the near-infrared spectral region (Wright et al, this conference). The dedicated near-infrared (900 to 1700 nm) instrument takes advantage of a new generation of avalanche photodiodes (APD), based on internal discrete amplification. These discrete APD (DAPD) detectors have a high speed response ($>$ 1 GHz) and gain comparable to photomultiplier tubes, while also achieving significantly lower noise than previous APDs. We are investigating the use of DAPD detectors in this new astronomical instrument for a SETI search and transient source observations. We investigated experimentally the advantages of using a multiple detector device operating in parallel to remove spurious signals. We present the detector characterization and performance of the instrument in terms of false positive detection rates both theoretically and empirically through lab measurements. We discuss the required criteria that will be needed for laser light pulse detection in our experiment. These criteria are defined to optimize the trade between high detection efficiency and low false positive coincident signals, which can be produced by detector dark noise, background light, cosmic rays, and astronomical sources. We investigate experimentally how false coincidence rates depend on the number of detectors in parallel, and on the signal pulse height and width. We also look into the corresponding threshold to each of the signals to optimize the sensitivity while also reducing the false coincidence rates. Lastly, we discuss the analytical solution used to predict the probability of laser pulse detection with multiple detectors.

Radio astronomical imaging arrays comprising large numbers of antennas, O(10^2-10^3) have posed a signal processing challenge because of the required O(N^2) cross correlation of signals from each antenna and requisite signal routing. This motivated the implementation of a Packetized Correlator architecture that applies Field Programmable Gate Arrays (FPGAs) to the O(N) "F-stage" transforming time domain to frequency domain data, and Graphics Processing Units (GPUs) to the O(N^2) "X-stage" performing an outer product among spectra for each antenna. The design is readily scalable to at least O(10^3) antennas. Fringes, visibility amplitudes and sky image results obtained during field testing are presented.

We are performing a transient, microsecond timescale radio sky survey, called "Astropulse," using the Arecibo telescope. Astropulse searches for brief (0.4 {\mu}s to 204.8 {\mu}s), wideband (relative to its 2.5 MHz bandwidth) radio pulses centered at 1,420 MHz. Astropulse is a commensal (piggyback) survey, and scans the sky between declinations of -1.33 and 38.03 degrees. We obtained 1,540 hours of data in each of 7 beams of the ALFA receiver, with 2 polarizations per beam. Examination of timescales on the order of a few microseconds is possible because we used coherent dedispersion. The more usual technique, incoherent dedispersion, cannot resolve signals below a minimum timescale. However, coherent dedispersion requires more intensive computation than incoherent dedispersion. The required processing power was provided by BOINC, the Berkeley Open Infrastructure for Network Computing.

We present a targeted search for narrow-band (< 5 Hz) drifting sinusoidal radio emission from 86 stars in the Kepler field hosting confirmed or candidate exoplanets. Radio emission less than 5 Hz in spectral extent is currently known to only arise from artificial sources. The stars searched were chosen based on the properties of their putative exoplanets, including stars hosting candidates with 380 K > T_eq > 230 K, stars with 5 or more detected candidates or stars with a super-Earth (R_p < 3 R_earth) in a > 50 day orbit. Baseband voltage data across the entire band between 1.1 and 1.9 GHz were recorded at the Robert C. Byrd Green Bank Telescope between Feb--Apr 2011 and subsequently searched offline. No signals of extraterrestrial origin were found. We estimate that fewer than ~1% of transiting exoplanet systems host technological civilizations that are radio loud in narrow-band emission between 1-2 GHz at an equivalent isotropically radiated power (EIRP) of ~1.5 x 10^21 erg s^-1, approximately eight times the peak EIRP of the Arecibo Planetary Radar, and we limit the the number of 1-2 GHz narrow-band-radio-loud Kardashev type II civilizations in the Milky Way to be < 10^-6 M_solar^-1. Here we describe our observations, data reduction procedures and results.

The Allen Telescope Array (ATA) is a cm-wave interferometer in California, comprising 42 antenna elements with 6-m diameter dishes. We characterize the antenna optical accuracy using two-antenna interferometry and radio holography. The distortion of each telescope relative to the average is small, with RMS differences of 1 percent of beam peak value. Holography provides images of dish illumination pattern, allowing characterization of as-built mirror surfaces. The ATA dishes can experience mm-scale distortions across -2 meter lengths due to mounting stresses or solar radiation. Experimental RMS errors are 0.7 mm at night and 3 mm under worst case solar illumination. For frequencies 4, 10, and 15 GHz, the nighttime values indicate sensitivity losses of 1, 10 and 20 percent, respectively. The ATA.s exceptional wide-bandwidth permits observations over a continuous range 0.5 to 11.2 GHz, and future retrofits may increase this range to 15 GHz. Beam patterns show a slowly varying focus frequency dependence. We probe the antenna optical gain and beam pattern stability as a function of focus and observation frequency, concluding that ATA can produce high fidelity images over a decade of simultaneous observation frequencies. In the day, the antenna sensitivity and pointing accuracy are affected. We find that at frequencies greater than 5 GHz, daytime observations greater than 5 GHz will suffer some sensitivity loss and it may be necessary to make antenna pointing corrections on a 1 to 2 hourly basis.

Microwave Kinetic Inductance Detectors (MKIDs) are superconducting detectors capable of counting single photons and measuring their energy in the UV, optical, and near-IR. MKIDs feature intrinsic frequency domain multiplexing (FDM) at microwave frequencies, allowing the construction and readout of large arrays. Due to the microwave FDM, MKIDs do not require the complex cryogenic multiplexing electronics used for similar detectors, such as Transition Edge Sensors (TESs), but instead transfer this complexity to room temperature electronics where they present a formidable signal processing challenge. In this paper we describe the first successful effort to build a readout for a photon counting optical/near-IR astronomical instrument, the ARray Camera for Optical to Near-infrared Spectrophotometry (ARCONS). This readout is based on open source hardware developed by the Collaboration for Astronomy Signal Processing and Electronics Research (CASPER). Designed principally for radio telescope backends, it is flexible enough to be used for a variety of signal processing applications.

A new spectrometer for the Green Bank Telescope (GBT) is being built jointly by the NRAO and the CASPER, University of California, Berkeley. The spectrometer uses 8 bit ADCs and will be capable of processing up to 1.25 GHz bandwidth from 8 dual polarized beams. This mode will be used to process data from focal plane arrays. The spectrometer supports observing mode with 8 tunable digital sub-bands within the 1.25 GHz bandwidth. The spectrometer can also be configured to process a bandwidth of up to 10 GHz with 64 tunable sub-bands from a dual polarized beam. The vastly enhanced backend capabilities will support several new science projects with the GBT.

Impulsive radio-frequency signals from astronomical sources are dispersed by the frequency dependent index of refraction of the interstellar media and so appear as chirped signals when they reach earth. Searches for dispersed impulses have been limited by false detections due to radio frequency interference (RFI) and, in some cases, artifacts of the instrumentation. Many authors have discussed techniques to excise or mitigate RFI in searches for fast transients, but comparisons between different approaches are lacking. This work develops RFI mitigation techniques for use in searches for dispersed pulses, employing data recorded in a "Fly's Eye" mode of the Allen Telescope Array as a test case. We gauge the performance of several RFI mitigation techniques by adding dispersed signals to data containing RFI and comparing false alarm rates at the observed signal-to-noise ratios of the added signals. We find that Huber filtering is most effective at removing broadband interferers, while frequency centering is most effective at removing narrow frequency interferers. Neither of these methods is effective over a broad range of interferers. A method that combines Huber filtering and adaptive interference cancellation provides the lowest number of false positives over the interferers considered here. The methods developed here have application to other searches for dispersed pulses in incoherent spectra, especially those involving multiple beam systems.

The Allen Telescope Array was used to monitor Mars between 9 March and 2 June 2010, over a total of approximately 30 hours, for radio emission indicative of electrostatic discharge. The search was motivated by the report from Ruf et al. (2009) of the detection of non-thermal microwave radiation from Mars characterized by peaks in the power spectrum of the kurtosis, or kurtstrum, at 10 Hz, coinciding with a large dust storm event on 8 June 2006. For these observations, we developed a wideband signal processor at the Center for Astronomy Signal Processing and Electronics Research (CASPER). This 1024-channel spectrometer calculates the accumulated power and power-squared, from which the spectral kurtosis is calculated post-observation. Variations in the kurtosis are indicative of non-Gaussianity in the signal, which can be used to detect variable cosmic signals as well as radio frequency interference (RFI). During the three month period of observations, dust activity occurred on Mars in the form of small-scale dust storms, however no signals indicating lightning discharge were detected. Frequent signals in the kurtstrum that contain spectral peaks with an approximate 10 Hz fundamental were seen at both 3.2 and 8.0 GHz, but were the result of narrowband RFI with harmonics spread over a broad frequency range.

The relatively unexplored fast radio transient parameter space is known to be home to a variety of interesting sources, including pulsars, pulsar giant pulses and non-thermal emission from planetary magnetospheres. In addition, a variety of hypothesized but as-yet-unobserved phenomena, such as primordial black hole evaporation and prompt emission associated with coalescing massive objects have been suggested. The 2007 announcement by Lorimer et al. of the detection of a bright (30 Jy) radio pulse that was inferred to be of extragalactic origin and the subsequent consternation have demonstrated both the potential utility of bright radio pulses as probes of the interstellar medium and intergalactic medium, as well as the need for wide-field surveys characterizing the fast-transient parameter space. Here we present results from the 450 hour, 150 deg^2 Fly's Eye survey for bright dispersed radio pulses at the Allen Telescope Array (ATA). The Fly's Eye spectrometer produces 128 channel power spectra over a 209 MHz bandwidth, centered at 1430 MHz, on 44 independent signals paths originating with 30 independent ATA antennas. Data were dedispersed between 0 and 2000 pc cm^-3 and searched for pulses with dispersion measures greater than 50 pc cm^-3 between 625 us and 5 s in duration. No pulses were detected in the survey, implying a limiting rate of less than 2 sky^-1 hour^-1 for 10 millisecond duration pulses having apparent energy densities greater than 440 kJy us, or mean flux densities greater than 44 Jy. Here we present details of the instrument, experiment and observations, including a discussion of our results in light of other single pulse searches.

SETI@home, a search for signals from extraterrestrial intelligence, has been recording data at the Arecibo radio telescope since 1999. These data are sent via the Internet to the personal computers of volunteers who have donated their computers' idle time toward this search. To date, SETI@home volunteers have detected more than 4.2 billion potential signals. While essentially all of these potential signals are due to random noise processes, radio frequency interference (RFI), or interference processes in the SETI@home instrumentation, it is possible that a true extraterrestrial transmission exists within this database. Herein we describe the process of interference removal being implemented in the SETI@home post-processing pipeline, as well as those methods being used to identify candidates worthy of further investigation.

We summarize radio and optical SETI programs based at the University of California, Berkeley. The SEVENDIP optical pulse search looks for ns time scale pulses at visible wavelengths using an automated 30 inch telescope. The ongoing SERENDIP V.v sky survey searches for radio signals at the 300 meter Arecibo Observatory. The currently installed configuration supports 128 million channels over a 200 MHz bandwidth with ~1.6 Hz spectral resolution. SETI@home uses the desktop computers of volunteers to analyze over 160 TB of data at taken at Arecibo looking for two types of continuous wave signals and two types of pulsed signals. A version to be released this summer adds autocorrelation analysis to look for complex wave forms that have been repeated (and overlayed) after a short delay. SETI@home will soon be processing data of Kepler exoplanet systems collected at the GBT. The Astropulse project is the first SETI search for $\mu$s time scale dispersed pulses in the radio spectrum. We recently reobserved 114 sky locations where microsecond pulses were detected. This data is in process of being transferred to Berkeley for analysis.

Here we describe our ongoing efforts to develop high-performance and sensitive instrumentation for use in the search for extra-terrestrial intelligence (SETI). These efforts include our recently deployed Search for Extraterrestrial Emissions from Nearby Developed Intelligent Populations Spectrometer (SERENDIP V.v) and two instruments currently under development; the Heterogeneous Radio SETI Spectrometer (HRSS) for SETI observations in the radio spectrum and the Optical SETI Fast Photometer (OSFP) for SETI observations in the optical band. We will discuss the basic SERENDIP V.v instrument design and initial analysis methodology, along with instrument architectures and observation strategies for OSFP and HRSS. In addition, we will demonstrate how these instruments may be built using low-cost, modular components and programmed and operated by students using common languages, e.g. ANSI C.

We demonstrate a signal processing concept for imaging the sky at millisecond rates with radio interferometers. The "Pocket Correlator" (PoCo) correlates the signals from multiple elements of a radio interferometer fast enough to image brief, dispersed pulses. By the nature of interferometry, a millisecond correlator functions like a large, single-dish telescope, but with improved survey speed, spatial localization, calibration, and interference rejection. To test the concept, we installed PoCo at the Allen Telescope Array (ATA) to search for dispersed pulses from the Crab pulsar, B0329+54, and M31 using total-power, visibility-based, and image-plane techniques. In 1.7 hours of observing, PoCo detected 191 giant pulses from the Crab pulsar brighter than a typical 5 sigma sensitivity limit of 60 Jy over pulse widths of 3 milliseconds. Roughly 40% of pulses from pulsar B0329+54 were detected by using novel visibility-based techniques. Observations of M31 constrain the rate of pulses brighter than 190 Jy in a three degree region surrounding the galaxy to <4.3/hr. We calculate the computational demand of various visibility-based pulse search algorithms and demonstrate how compute clusters can help meet this demand. Larger implementations of the fast imaging concept will conduct blind searches for millisecond pulses in our Galaxy and beyond, providing a valuable probe of the interstellar/intergalactic media, discovering new kinds of radio transients, and localizing them to constrain models of their origin.

The Pi GHz Sky Survey (PiGSS) is a key project of the Allen Telescope Array. PiGSS is a 3.1 GHz survey of radio continuum emission in the extragalactic sky with an emphasis on synoptic observations that measure the static and time-variable properties of the sky. During the 2.5-year campaign, PiGSS will twice observe ~250,000 radio sources in the 10,000 deg^2 region of the sky with b > 30 deg to an rms sensitivity of ~1 mJy. Additionally, sub-regions of the sky will be observed multiple times to characterize variability on time scales of days to years. We present here observations of a 10 deg^2 region in the Bootes constellation overlapping the NOAO Deep Wide Field Survey field. The PiGSS image was constructed from 75 daily observations distributed over a 4-month period and has an rms flux density between 200 and 250 microJy. This represents a deeper image by a factor of 4 to 8 than we will achieve over the entire 10,000 deg^2. We provide flux densities, source sizes, and spectral indices for the 425 sources detected in the image. We identify ~100$ new flat spectrum radio sources; we project that when completed PiGSS will identify 10^4 flat spectrum sources. We identify one source that is a possible transient radio source. This survey provides new limits on faint radio transients and variables with characteristic durations of months.

We present the Allen Telescope Array Twenty-centimeter Survey (ATATS), a multi-epoch (12 visits), 690 square degree radio image and catalog at 1.4GHz. The survey is designed to detect rare, very bright transients as well as to verify the capabilities of the ATA to form large mosaics. The combined image using data from all 12 ATATS epochs has RMS noise sigma = 3.94mJy / beam and dynamic range 180, with a circular beam of 150 arcsec FWHM. It contains 4408 sources to a limiting sensitivity of S = 20 mJy / beam. We compare the catalog generated from this 12-epoch combined image to the NRAO VLA Sky Survey (NVSS), a legacy survey at the same frequency, and find that we can measure source positions to better than ~20 arcsec. For sources above the ATATS completeness limit, the median flux density is 97% of the median value for matched NVSS sources, indicative of an accurate overall flux calibration. We examine the effects of source confusion due to the effects of differing resolution between ATATS and NVSS on our ability to compare flux densities. We detect no transients at flux densities greater than 40 mJy in comparison with NVSS, and place a 2-sigma upper limit on the transient rate for such sources of 0.004 per square degree. These results suggest that the > 1 Jy transients reported by Matsumura et al. (2009) may not be true transients, but rather variable sources at their flux density threshold.

Berkeley conducts 7 SETI programs at IR, visible and radio wavelengths. Here we review two of the newest efforts, Astropulse and Fly's Eye. A variety of possible sources of microsecond to millisecond radio pulses have been suggested in the last several decades, among them such exotic events as evaporating primordial black holes, hyper-flares from neutron stars, emissions from cosmic strings or perhaps extraterrestrial civilizations, but to-date few searches have been conducted capable of detecting them. We are carrying out two searches in hopes of finding and characterizing these mu-s to ms time scale dispersed radio pulses. These two observing programs are orthogonal in search space; the Allen Telescope Array's (ATA) "Fly's Eye" experiment observes a 100 square degree field by pointing each 6m ATA antenna in a different direction; by contrast, the Astropulse sky survey at Arecibo is extremely sensitive but has 1/3,000 of the instantaneous sky coverage. Astropulse's multibeam data is transferred via the internet to the computers of millions of volunteers. These computers perform a coherent de-dispersion analysis faster than the fastest available supercomputers and allow us to resolve pulses as short as 400 ns. Overall, the Astropulse survey will be 30 times more sensitive than the best previous searches. Analysis of results from Astropulse is at a very early stage. The Fly's Eye was successfully installed at the ATA in December of 2007, and to-date approximately 450 hours of observation has been performed. We have detected three pulsars and six giant pulses from the Crab pulsar in our diagnostic pointing data. We have not yet detected any other convincing bursts of astronomical origin in our survey data. (Abridged)

We are developing the Precision Array for Probing the Epoch of Reionization (PAPER) to detect 21cm emission from the early Universe, when the first stars and galaxies were forming. We describe the overall experiment strategy and architecture and summarize two PAPER deployments: a 4-antenna array in the low-RFI environment of Western Australia and an 8-antenna array at our prototyping site in Green Bank, WV. From these activities we report on system performance, including primary beam model verification, dependence of system gain on ambient temperature, measurements of receiver and overall system temperatures, and characterization of the RFI environment at each deployment site. We present an all-sky map synthesized between 139 MHz and 174 MHz using data from both arrays that reaches down to 80 mJy (4.9 K, for a beam size of 2.15e-5 steradians at 154 MHz), with a 10 mJy (620 mK) thermal noise level that indicates what would be achievable with better foreground subtraction. We calculate angular power spectra ($C_\ell$) in a cold patch and determine them to be dominated by point sources, but with contributions from galactic synchrotron emission at lower radio frequencies and angular wavemodes. Although the cosmic variance of foregrounds dominates errors in these power spectra, we measure a thermal noise level of 310 mK at $\ell=100$ for a 1.46-MHz band centered at 164.5 MHz. This sensitivity level is approximately three orders of magnitude in temperature above the level of the fluctuations in 21cm emission associated with reionization.

Time-to-science is an important figure of merit for digital instrumentation serving the astronomical community. A digital signal processing (DSP) community is forming that uses shared hardware development, signal processing libraries, and instrument architectures to reduce development time of digital instrumentation and to improve time-to-science for a wide variety of projects. We suggest prioritizing technological development supporting the needs of this nascent DSP community. After outlining several instrument classes that are relying on digital instrumentation development to achieve new science objectives, we identify key areas where technologies pertaining to interoperability and processing flexibility will reduce the time, risk, and cost of developing the digital instrumentation for radio astronomy. These areas represent focus points where support of general-purpose, open-source development for a DSP community should be prioritized in the next decade. Contributors to such technological development may be centers of support for this DSP community, science groups that contribute general-purpose DSP solutions as part of their own instrumentation needs, or engineering groups engaging in research that may be applied to next-generation DSP instrumentation.

The first 42 elements of the Allen Telescope Array (ATA-42) are beginning to deliver data at the Hat Creek Radio Observatory in Northern California. Scientists and engineers are actively exploiting all of the flexibility designed into this innovative instrument for simultaneously conducting surveys of the astrophysical sky and conducting searches for distant technological civilizations. This paper summarizes the design elements of the ATA, the cost savings made possible by the use of COTS components, and the cost/performance trades that eventually enabled this first snapshot radio camera. The fundamental scientific program of this new telescope is varied and exciting; some of the first astronomical results will be discussed.

A new generation of radio telescopes is achieving unprecedented levels of sensitivity and resolution, as well as increased agility and field-of-view, by employing high-performance digital signal processing hardware to phase and correlate large numbers of antennas. The computational demands of these imaging systems scale in proportion to BMN^2, where B is the signal bandwidth, M is the number of independent beams, and N is the number of antennas. The specifications of many new arrays lead to demands in excess of tens of PetaOps per second. To meet this challenge, we have developed a general purpose correlator architecture using standard 10-Gbit Ethernet switches to pass data between flexible hardware modules containing Field Programmable Gate Array (FPGA) chips. These chips are programmed using open-source signal processing libraries we have developed to be flexible, scalable, and chip-independent. This work reduces the time and cost of implementing a wide range of signal processing systems, with correlators foremost among them,and facilitates upgrading to new generations of processing technology. We present several correlator deployments, including a 16-antenna, 200-MHz bandwidth, 4-bit, full Stokes parameter application deployed on the Precision Array for Probing the Epoch of Reionization.

The cores of most galaxies are thought to harbour supermassive black holes, which power galactic nuclei by converting the gravitational energy of accreting matter into radiation (ref 1). Sagittarius A*, the compact source of radio, infrared and X-ray emission at the centre of the Milky Way, is the closest example of this phenomenon, with an estimated black hole mass that is 4 million times that of the Sun (refs. 2,3). A long-standing astronomical goal is to resolve structures in the innermost accretion flow surrounding Sgr A* where strong gravitational fields will distort the appearance of radiation emitted near the black hole. Radio observations at wavelengths of 3.5 mm and 7 mm have detected intrinsic structure in Sgr A*, but the spatial resolution of observations at these wavelengths is limited by interstellar scattering (refs. 4-7). Here we report observations at a wavelength of 1.3 mm that set a size of 37 (+16, -10; 3-sigma) microarcseconds on the intrinsic diameter of Sgr A*. This is less than the expected apparent size of the event horizon of the presumed black hole, suggesting that the bulk of SgrA* emission may not be not centred on the black hole, but arises in the surrounding accretion flow.

The consortium for Galactic studies with the Arecibo L-band Feed Array (ALFA) is conducting a neutral hydrogen (HI) survey of the whole Arecibo sky (declination range from -1 to 38 degrees), with high angular (3.5') and velocity resolution (0.2 km/s). The precursor observations with ALFA of a region in the Galactic anti-center reveal numerous isolated, small (a few pc in size), and cold (T_k<400 K) HI clouds at low negative velocities, distinctly separated from the HI disk emission (`low-velocity clouds', LVCs). These clouds are most likely located in the transition region between the Galactic disk and halo (at scale heights of 60--900 pc), yet they have properties of typical cold neutral clouds. LVCs are colder and, most likely, smaller and less massive than Lockman's clouds in the disk/halo interface region of the inner Galaxy. Our observations demonstrate that the cloudy structure of the interface region is most likely a general phenomenon, not restricted to the inner Galaxy. LVCs have sizes and radial velocities in agreement with the expectations for clouds formed in low-temperature fountain flows, although we measure a factor of ten higher HI column densities. Alternatively, LVCs could represent the final stages of the infalling intergalactic material in the on-going construction of the Galaxy. In the same dataset at higher negative velocities, we have discovered a `companion' HI cloud located 50' southwest of CHVC186+19-114. CHVC186+19-114 is a typical compact high velocity cloud (HVC) with a well-defined core/envelope structure. The companion cloud has a diameter of only 7'x9', and is one of the smallest HVCs known, most likely stripped from the main cloud through the interactions with the halo medium.

SETI@home observes a 2.5 MHz bandwidth centered on 1420 MHz near the 21-cm line using a short line feed at Arecibo which provides a 6' beam. This feed sits on Carriage House 1. During normal astronomical observations with the new Gregorian dome the feed scans across the sky at twice the sidereal rate. We are using the SETI@home receiver to obtain about 4.4x10^6 HI spectra per year with integration time of 5 seconds per spectrum. We have accumulated 2.6 years of data covering most of the sky observable from Arecibo. This survey has much better angular resolution than previous single dish surveys and better sensitivity than existing or planned interferometric surveys.