The General Antiparticle Spectrometer (GAPS) will carry out a sensitive dark matter search by measuring low-energy ($\mathrm{E} < 0.25 \mathrm{GeV/nucleon}$) cosmic ray antinuclei. The primary targets are low-energy antideuterons produced in the annihilation or decay of dark matter. At these energies antideuterons from secondary/tertiary interactions are expected to have very low fluxes, significantly below those predicted by well-motivated, beyond the standard model theories. GAPS will also conduct low-energy antiproton and antihelium searches. Combined, these observations will provide a powerful search for dark matter and provide the best observations to date on primordial black hole evaporation on Galactic length scales. The GAPS instrument detects antinuclei using the novel exotic atom technique. It consists of a central tracker with a surrounding time-of-flight (TOF) system. The tracker is a one cubic meter volume containing 10 cm-diameter lithium-drifted silicon (Si(Li)) detectors. The TOF is a plastic scintillator system that will both trigger the Si(Li) tracker and enable better reconstruction of particle tracks. After coming to rest in the tracker, antinuclei will form an excited exotic atom. This will then de-excite via characteristic X-ray transitions before producing a pion/proton star when the antiparticle annihilates with the nucleus. This unique event topology will give GAPS the nearly background-free detection capability required for a rare-event search. Here we present the scientific motivation for the GAPS experiment, its design and its current status as it prepares for flight in the austral summer of 2021-22.

We perform global three-dimensional (3D) radiation-hydrodynamic (RHD) simulations of out- flow from supercritical accretion flow around a 10 Msun black hole. We only solve the outflow part, starting from the axisymmetric 2D simulation data in a nearly steady state but with small perturbations in a sinusoidal form being added in the azimuthal direction. The mass accretion rate onto the black hole is ~10^2 L_E/c^2 in the underlying 2D simulation data and the outflow rate is ~10 L_E/c^2 (with LE and c being the Eddington luminosity and speed of light, respectively). We first confirm the emergence of clumpy outflow, which was discovered by the 2D RHD simulations, above the photosphere located at a few hundreds of Schwarzschild radii (r_S) from the central black hole. As prominent 3D features we find that the clumps have the shape of a torn sheet, rather than a cut string, and that they are rotating around the central black hole with a sub-Keplerian velocity at a distance of ~10^3 r_S from the center. The typical clump size is ~30 r_S or less in the radial direction, and is more elongated in the angular directions, ~hundreds of r_S at most. The sheet separation ranges from 50 to 150 r_S. We expect stochastic time variations when clumps pass across the line of the sight of a distant observer. Variation timescales are estimated to be several seconds for a black hole with mass of ten to several tens of Msun, in rough agreement with the observations of some ultra-luminous X-ray sources.

We apply our two-dimensional (2D), radially self-similar steady-state accretion flow model to the analysis of hydrodynamic simulation results of supercritical accretion flows. Self-similarity is checked and the input parameters for the model calculation, such as advective factor and heat capacity ratio, are obtained from time-averaged simulation data. Solutions of the model are then calculated and compared with the simulation results. We find that in the converged region of the simulation, excluding the part too close to the black hole, the radial distribution of azimuthal velocity $v_\phi$, density $\rho$ and pressure $p$ basically follows the self-similar assumptions, i.e. they are roughly proportional to $r^{-0.5}$, $r^{-n}$, and $r^{-(n+1)}$, respectively, where $n\sim0.85$ for the mass injection rate of $1000L_\mathrm{E}/c^2$, and $n\sim0.74$ for $3000L_\mathrm{E}/c^2$. The distribution of $v_r$ and $v_\theta$ agrees less with self-similarity, possibly due to convective motions in the $r\theta$ plane. The distribution of velocity, density and pressure in $\theta$ direction obtained by the steady model agrees well with the simulation results {within the calculation boundary of the steady model}. Outward mass flux in the simulations is overall directed toward polar angle of 0.8382 rad ($\sim 48.0^\circ$) for $1000L_\mathrm{E}/c^2$, and 0.7852 rad ($\sim 43.4^\circ$) for $3000L_\mathrm{E}/c^2$, and $\sim$94\% of the mass inflow are driven away as outflow, while outward momentum and energy fluxes are focused around the polar axis. Part of these fluxes lie in the region that are not calculated by the steady model, and special attention should be paid when the model is applied.

In order to understand the physical processes underlying clump formation in outflow from supercritical accretion flow, we performed two-dimensional radiation hydrodynamic (RHD) simulations. We focus our discussion on the nature of RHD instability in marginally optically thick, plane-parallel, super-Eddington atmosphere. Initially we set two-layered atmosphere with a density contrast of 100 exposed to strong, upward continuum-radiation force; the lower layer is denser than the upper one, condition for an RHD instability. We assume non-zero but negligible gravitational force, compared with the radiation force. We find that short wavelength perturbations first grow, followed by growth of longer wavelength patterns, which lead to the formation of clumpy structure. The typical size of clumps (clouds) corresponds to about one optical depth. An anti-correlation between the radiation pressure and the gas pressure is confirmed: this anti-correlation provides a damping mechanism of longer wavelength perturbations than the typical clump size. Matter and radiation energy densities are correlated. These features are exactly what we found in the radiation-magnetohydrodynamic (radiation-MHD) simulations of supercritical outflow.

Significant fraction of matter in supercritical (or super-Eddington) accretion flow is blown away by radiation force, thus forming outflows, however, the properties of such radiation-driven outflows have been poorly understood. We have performed global two-dimensional radiaion-magnetohydrodynamic simulations of supercritical accretion flow onto a black hole with 10 or 10^8 solar masses in a large simulation box of 514 r_S x 514 r_S (with r_S being the Schwarzschild radius). We confirm that uncollimated outflows with velocities of 10 percents of the speed of light emerge from the innermost part of the accretion flow over wide angles of 10 - 50 degree from the disk rotation axis. Importantly, the outflows exhibit clumpy structure above heights of ~ 250 r_S. The typical size of the clumps is ~ 10 r_S, which corresponds to one optical depth, and their shapes are slightly elongated along the outflow direction. Since clumps start to form in the layer above which (upward) radiation force overcomes (downward) gravity force, Rayleigh-Taylor instability seems to be of primary cause. In addition, a radiation hydrodynamic instability, which arises when radiation funnels through radiation-pressure supported atmosphere, may also help forming clumps of one optical depth. Magnetic photon bubble instability seems not to be essential, since similar clumpy outflow structure is obtained in non-magnetic radiation-hydrodynamic simulations. Since the spatial covering factor of the clumps is estimated to be ~ 0.3 and since they are marginally optically thick, they will explain at least some of rapid light variations of active galactic nuclei. We further discuss a possibility of producing broad-line clouds by the clumpy outflow.

This paper, first, presents introductory reviews of the Space Infrared Telescope for Cosmology and Astrophysics (SPICA) mission and the SPICA Coronagraph Instrument (SCI). SPICA will realize a 3m class telescope cooled to 6K in orbit. The launch of SPICA is planned to take place in FY2018. The SPICA mission provides us with a unique opportunity to make high dynamic-range observations because of its large telescope aperture, high stability, and the capability for making infrared observations from deep space. The SCI is a high dynamic-range instrument proposed for SPICA. The primary objectives for the SCI are the direct coronagraphic detection and spectroscopy of Jovian exoplanets in the infrared region, while the monitoring of transiting planets is another important target owing to the non-coronagraphic mode of the SCI. Then, recent technical progress and ideas in conceptual studies are presented, which can potentially enhance the performance of the instrument: the designs of an integral 1-dimensional binary-shaped pupil mask coronagraph with general darkness constraints, a concentric ring mask considering the obscured pupil for surveying a wide field, and a spectral disperser for simultaneous wide wavelength coverage, and the first results of tests of the toughness of MEMS deformable mirrors for the rocket launch are introduced, together with a description of a passive wavefront correction mirror using no actuator.

We present the SPICA Coronagraphic Instrument (SCI), which has been designed for a concentrated study of extra-solar planets (exoplanets). SPICA mission provides us with a unique opportunity to make high contrast observations because of its large telescope aperture, the simple pupil shape, and the capability for making infrared observations from space. The primary objectives for the SCI are the direct coronagraphic detection and spectroscopy of Jovian exoplanets in infrared, while the monitoring of transiting planets is another important target. The specification and an overview of the design of the instrument are shown. In the SCI, coronagraphic and non-coronagraphic modes are applicable for both an imaging and a spectroscopy. The core wavelength range and the goal contrast of the coronagraphic mode are 3.5--27$\mu$m, and 10$^{-6}$, respectively. Two complemental designs of binary shaped pupil mask coronagraph are presented. The SCI has capability of simultaneous observations of one target using two channels, a short channel with an InSb detector and a long wavelength channel with a Si:As detector. We also give a report on the current progress in the development of key technologies for the SCI.

Relativistic jets from compact objects are ubiquitous phenomena in the Unvierse, but their driving mechanism has been an enigmatic issue over many decades. Two basic models have been extensively discussed: magnetohydrodynamic (MHD) jets and radiation-hydrodynamic (RHD) jets. Currently, the former is more widely accepted, since magnetic field is expected to provide both the acceleration and collimation mechanisms, whereas radiation field cannot collimate outflow. Here, we propose a new type of jets, radiation-magnetohydrodynamic (RMHD) jets, based on our global RMHD simulation of luminous accretion flow onto a black hole shining above the Eddington luminosity. The RMHD jet can be accelerated up to the relativistic speed by the radiation-pressure force and is collimated by the Lorentz force of a magnetic tower, inflated magnetic structure made by toroidal magnetic field lines accumulated around the black hole, though radiation energy greatly dominates over magnetic energy. This magnetic tower is collimated by a geometrically thick accretion flow supported by radiation-pressure force. This type of jet may explain relativistic jets from Galactic microquasars, appearing at high luminosities.

Photon trapping and outflow are two key physics associated with the supercritical accretion flow. We investigate the conflict between these two processes based on two-dimensional radiation-hydrodynamic (RHD) simulation data and construct a simplified (radially) one-dimensional model. Mass loss due to outflow, which is not considered in the slim-disk model, will reduce surface density of the flow, and if very significant, it will totally suppress photon trapping effects. If the photon trapping is very significant, conversely, outflow will be suppressed because radiation pressure force will be reduced. To see what actually occurs, we examine the RHD simulation data and evaluate the accretion rate and outflow rate as functions of radius. We find that the former monotonically decreases, while the latter increases, as the radius decreases. However, the former is kept constant at small radii, inside several Schwarzschild radii, since the outflow is suppressed by the photon trapping effects. To understand the conflict between the photon trapping and outflow in a simpler way, we model the radial distribution of the accretion rate from the simulation data and build up a new (radially) one-dimensional model, which is similar to the slim-disk model but incorporates the mass loss effects due to the outflow. We find that the surface density (and, hence, the optical depth) is much reduced even inside the trapping radius, compared with the case without outflow, whereas the effective temperature distribution hardly changes. That is, the emergent spectra do not sensitively depend on the amount of mass outflow. We conclude that the slim-disk approach is valid for interpreting observations, even if the outflow is taken into account.

We study thermodynamical properties of a fuzzy sphere in matrix quantum mechanics of the BFSS type including the Chern-Simons term. Various quantities are calculated to all orders in perturbation theory exploiting the one-loop saturation of the effective action in the large-N limit. The fuzzy sphere becomes unstable at sufficiently strong coupling, and the critical point is obtained explicitly as a function of the temperature. The whole phase diagram is investigated by Monte Carlo simulation. Above the critical point, we obtain perfect agreement with the all order results. In the region below the critical point, which is not accessible by perturbation theory, we observe the Hagedorn transition. In the high temperature limit our model is equivalent to a totally reduced model, and the relationship to previously known results is clarified.