Normalized to: Takahashi, A.
[1]
oai:arXiv.org:1908.10047 [pdf] - 1949470
Mid-infrared spectroscopy of zodiacal emission with AKARI/IRC
Submitted: 2019-08-27
Interplanetary dust (IPD) is thought to be recently supplied from asteroids
and comets. Grain properties of the IPD can give us the information about the
environment in the proto-solar system, and can be traced from the shapes of
silicate features around 10 $\mu$m seen in the zodiacal emission spectra. We
analyzed mid-IR slit-spectroscopic data of the zodiacal emission in various sky
directions obtained with the Infrared Camera on board AKARI satellite. After we
subtracted the contamination due to instrumental artifacts, we have
successfully obtained high S/N spectra and have determined detailed shapes of
excess emission features in the 9 -- 12 $\mu$m range in all the sky directions.
According to a comparison between the feature shapes averaged over all
directions and the absorption coefficients of candidate minerals, the IPD was
found to typically include small silicate crystals, especially enstatite
grains. We also found the variations in the feature shapes and the related
grain properties among the different sky directions. From investigations of the
correlation between feature shapes and the brightness contributions from dust
bands, the IPD in dust bands seems to have the size frequency distribution
biased toward large grains and show the indication of hydrated minerals. The
spectra at higher ecliptic latitude showed a stronger excess, which indicates
an increase in the fraction of small grains included in the line of sight at
higher ecliptic latitudes. If we focus on the dependence of detailed feature
shapes on ecliptic latitudes, the IPD at higher latitudes was found to have a
lower olivine/pyroxene ratio for small amorphous grains. The variation of the
mineral composition of the IPD in different sky directions may imply different
properties of the IPD from different types of parent bodies, because the
spatial distribution of the IPD depends on the type of the parent body.
[2]
oai:arXiv.org:1710.00108 [pdf] - 1686641
Laboratory demonstration of a cryogenic deformable mirror for wavefront
correction of space-borne infrared telescopes
Takahashi, Aoi;
Enya, Keigo;
Haze, Kanae;
Kataza, Hirokazu;
Kotani, Takayuki;
Matsuhara, Hideo;
Kamiya, Tomohiro;
Yamamuro, Tomoyasu;
Bierden, Paul;
Cornelissen, Steven;
Lam, Charlie;
Feinberg, Michael
Submitted: 2017-09-29
This paper demonstrates a cryogenic deformable mirror (DM) with 1,020
actuators based on micro-electrical mechanical systems (MEMS) technology.
Cryogenic space-borne infrared telescopes can experience a wavefront error due
to a figure error of their mirror surface, which makes the imaging performance
worse. For on-orbit wavefront correction as one solution, we developed a
MEMS-processed electro-static DM with a special surrounding structure for use
under the cryogenic temperature. We conducted a laboratory demonstration of its
operation in three cooling cycles between 5 K and 295 K. Using a laser
interferometer, we detected the deformation corresponding to the applied
voltages under the cryogenic temperature for the first time. The relationship
between voltages and displacements was qualitatively expressed by the quadratic
function, which is assumed based on the principle of electro-static DMs. We
also found that it had a high operating repeatability of a few nm RMS and no
significant hysteresis. Using the measured values of repeatability, we
simulated the improvement of PSF by wavefront correction with our DM. These
results show that our developed DM is effective in improving imaging
performance and PSF contrast of space-borne infrared telescopes.
[3]
oai:arXiv.org:1603.09374 [pdf] - 1383745
Experimental demonstration of binary shaped pupil mask coronagraphs for
telescopes with obscured pupils
Submitted: 2016-03-30
We present the fabrication and experimental demonstration of three
free-standing binary shaped pupil mask coronagraphs, which are applicable for
telescopes with partially obscured pupils. Three masks, designed to be
complementary (labeled Mask-A, Mask-B, and Mask-C), were formed in 5 micron
thick nickel. The design of Mask-A is based on a one-dimensional barcode mask.
The design principle of Mask-B is similar, but has a smaller inner working
angle and a lower contrast than Mask-A. Mask-C is based on a concentric ring
mask and provides the widest dark region and a symmetric point spread function.
Mask-A and Mask-C were both designed to produce a flexibly tailored dark region
(i.e., non-uniform contrast). The contrast was evaluated using a light source
comprising a broadband super-luminescent light-emitting diode with a center
wavelength of 650 nm, and the measurements were carried out in a large vacuum
chamber. Active wavefront control was not applied in this work. The
coronagraphic images obtained by experiment were mostly consistent with the
designs. The contrast of Mask-A within the ranges 3.3 - 8 lambda/D and 8 - 12
lambda/D was ~10^{-4} - 10^{-7} and ~10^{-7}, respectively, where lambda is the
wavelength and D is the pupil diameter. The contrast close to the center of
Mask-B was ~10^{-4} and that of Mask-C over an extended field of view (5 - 25
lambda/D) was ~10^{-5} - 10^{-6}. The effect of tilting the masks was
investigated, and found to be irrelevant at the ~10^{-7} contrast level.
Therefore the masks can be tilted to avoid ghosting. These high-contrast
free-standing masks have the potential to enable coronagraphic imaging over a
wide wavelength range using both ground-based and space-borne general-purpose
telescopes with pupil structures not specifically designed for coronagraphy.
[4]
oai:arXiv.org:1105.5929 [pdf] - 1076959
Widely Extended [OIII] 88 um Line Emission around the 30 Doradus Region
Revealed with AKARI FIS-FTS
Kawada, Mitsunobu;
Takahashi, Ai;
Yasuda, Akiko;
Kiriyama, Yuichi;
Mori, Tatsuya;
Mouri, Akio;
Kaneda, Hidehiro;
Okada, Yoko;
Takahashi, Hidenori;
Murakami, Noriko
Submitted: 2011-05-30
We present the distribution map of the far-infrared [OIII] 88um line emission
around the 30 Doradus (30 Dor) region in the Large Magellanic Cloud obtained
with the Fourier Transform Spectrometer of the Far-Infrared Surveyor onboard
AKARI. The map reveals that the [OIII] emission is widely distributed by more
than 10' around the super star cluster R136, implying that the 30 Dor region is
affluent with interstellar radiation field hard enough to ionize O^{2+}. The
observed [OIII] line intensities are as high as (1-2) x 10^{-6} W m^{-2}
sr^{-1} on the peripheral regions 4'-5' away from the center of 30 Dor, which
requires gas densities of 60-100 cm^{-3}. However the observed size of the
distribution of the [OIII] emission is too large to be explained by massive
stars in the 30 Dor region enshrouded by clouds with the constant gas density
of 10^2 cm^{-3}. Therefore the surrounding structure is likely to be highly
clumpy. We also find a global correlation between the [OIII] and the
far-infrared continuum emission, suggesting that the gas and dust are well
mixed in the highly-ionized region where the dust survives in clumpy dense
clouds shielded from the energetic photons.