Realistic synthetic observations of theoretical source models are essential for our understanding of real observational data. In using synthetic data, one can verify the extent to which source parameters can be recovered and evaluate how various data corruption effects can be calibrated. These studies are important when proposing observations of new sources, in the characterization of the capabilities of new or upgraded instruments, and when verifying model-based theoretical predictions in a comparison with observational data. We present the SYnthetic Measurement creator for long Baseline Arrays (SYMBA), a novel synthetic data generation pipeline for Very Long Baseline Interferometry (VLBI) observations. SYMBA takes into account several realistic atmospheric, instrumental, and calibration effects. We used SYMBA to create synthetic observations for the Event Horizon Telescope (EHT), a mm VLBI array, which has recently captured the first image of a black hole shadow. After testing SYMBA with simple source and corruption models, we study the importance of including all corruption and calibration effects. Based on two example general relativistic magnetohydrodynamics (GRMHD) model images of M87, we performed case studies to assess the attainable image quality with the current and future EHT array for different weather conditions. The results show that the effects of atmospheric and instrumental corruptions on the measured visibilities are significant. Despite these effects, we demonstrate how the overall structure of the input models can be recovered robustly after performing calibration steps. With the planned addition of new stations to the EHT array, images could be reconstructed with higher angular resolution and dynamic range. In our case study, these improvements allowed for a distinction between a thermal and a non-thermal GRMHD model based on salient features in reconstructed images.

We report a first clear detection of the Zeeman splitting of a CCS emission line at 45 GHz toward a nearby prestellar dense filament, Taurus Molecular Cloud-1. We observed HC$_3$N non-Zeeman line simultaneously as the CCS line, and did not detect any significant splitting of HC$_3$N line. Thus, we conclude that our detection of the CCS Zeeman splitting is robust. The derived \textcolor{black}{line-of-sight} magnetic field strength is about 117 $\pm$ 21 $\mu$G, which corresponds to the normalized mass-to-magnetic flux ratio of 2.2 if we adopt the inclination angle of 45$^\circ$. Thus, we conclude that the TMC-1 filament is magnetically supercritical. Recent radiative transfer calculations of CCS and HC$_3$N lines along the line of sight suggest that the filament is collapsing with a speed of $\sim$ 0.6 km s$^{-1}$, which is comparable to three times the isothermal sound speed. This infall velocity appears to be consistent with the evolution of a gravitationally-infalling core.

We present the results of mapping observations toward a nearby starless filamentary cloud, the Taurus Molecular Cloud 1 (TMC-1), in the CCS(JN=43-32, 45.379033 GHz) emission line, using the Nobeyama 45-m telescope. The map shows that the TMC-1 filament has a diameter of ~0.1 pc and a length of ~0.5 pc at a distance of 140 pc. The position-velocity diagrams of CCS clearly indicate the existence of velocity-coherent substructures in the filament. We identify 21 substructures that are coherent in the position-position-velocity space by eye. Most of the substructures are elongated along the major axis of the TMC-1 filament. The line densities of the subfilaments are close to the critical line density for the equilibrium (~17 Mo/pc for the excitation temperature of 10 K), suggesting that self-gravity should play an important role in the dynamics of the subfilaments.

We clarify the line-of-sight structure of the Taurus Molecular Cloud 1 (TMC-1) on the basis of the CCS($J_N=4_3-3_2$) and HC$_3$N($J=5-4$) spectral data observed at a very high velocity resolution and sensitivity of $\Delta V \simeq 0.0004$ km s$^{-1}$ ($=61$ Hz) and $\Delta T_{\rm mb} \simeq 40$ mK. The data were obtained toward the cyanopolyyne peak with $\sim$30 hours integration using the Z45 receiver and the PolariS spectrometer installed in the Nobeyama 45m telescope. Analyses of the optically thin $F=4-4$ and $5-5$ hyperfine lines of the HC$_3$N emission show that the spectra consist of four distinct velocity components with a small line width ($\lesssim 0.1$ km s$^{-1}$) at $V_{\rm LSR}=$5.727, 5.901, 6.064, and 6.160 km s$^{-1}$, which we call A, B, C, and D, respectively, in the order of increasing LSR velocities. Utilizing the velocity information of the four velocity components, we further analyzed the optically thicker CCS spectrum and the other hyperfine lines of the HC$_3$N emission by solving the radiative transfer to investigate how the four velocity components overlap along the line of sight. Results indicate that they are located in the order of A, B, C, and D from far side to near side to the observer, indicating that TMC-1 is shrinking, moving inward as a whole.

We developed a dual-linear-polarization HEMT (High Electron Mobility Transistor) amplifier receiver system of the 45-GHz band (hereafter Z45), and installed it in the Nobeyama 45-m radio telescope. The receiver system is designed to conduct polarization observations by taking the cross correlation of two linearly-polarized components, from which we process full-Stokes spectroscopy. We aim to measure the magnetic field strength through the Zeeman effect of the emission line of CCS ($J_N=4_3-3_2$) toward pre-protostellar cores. A linear-polarization receiver system has a smaller contribution of instrumental polarization components to the Stokes $V$ spectra than that of the circular polarization system, so that it is easier to obtain the Stokes $V$ spectra. The receiver has an RF frequency of 42 $-$ 46 GHz and an intermediate frequency (IF) band of 4$-$8 GHz. The typical noise temperature is about 50 K, and the system noise temperature ranges from 100 K to 150K over the frequency of 42 $-$ 46 GHz. The receiver system is connected to two spectrometers, SAM45 and PolariS. SAM45 is a highly flexible FX-type digital spectrometer with a finest frequency resolution of 3.81 kHz. PolariS is a newly-developed digital spectrometer with a finest frequency resolution of 60 Hz, having a capability to process the full-Stokes spectroscopy. The Half Power Beam Width (HPBW) of the beam was measured to be 37$"$ at 43 GHz. The main beam efficiency of the Gaussian main beam was derived to be 0.72 at 43 GHz. The SiO maser observations show that the beam pattern is reasonably round at about 10 \% of the peak intensity and the side-lobe level was less than 3 \% of the peak intensity. Finally, we present some examples of astronomical observations using Z45.

We have developed a software-based polarization spectrometer, PolariS, to acquire full-Stokes spectra with a very high spectral resolution of 61 Hz. The primary aim of PolariS is to measure the magnetic fields in dense star-forming cores by detecting the Zeeman splitting of molecular emission lines. The spectrometer consists of a commercially available digital sampler and a Linux computer. The computer is equipped with a graphics processing unit (GPU) to process FFT and cross-correlation using the CUDA (Compute Unified Device Architecture) library developed by NVIDIA. Thanks to a high degree of precision in quantization of the analog-to-digital converter and arithmetic in the GPU, PolariS offers excellent performances in linearity, dynamic range, sensitivity, bandpass flatness and stability. The software has been released under the MIT License and is available to the public. In this paper, we report the design of PolariS and its performance verified through engineering tests and commissioning observations.

The Serpens South infrared dark cloud consists of several filamentary ridges, some of which fragment into dense clumps. On the basis of CCS ($J_N=4_3-3_2$), HC$_3$N ($J=5-4$), N$_2$H$^+$ ($J=1-0$), and SiO ($J=2-1, v=0$) observations, we investigated the kinematics and chemical evolution of these filamentary ridges. We find that CCS is extremely abundant along the main filament in the protocluster clump. We emphasize that Serpens South is the first cluster-forming region where extremely-strong CCS emission is detected. The CCS-to-N$_2$H$^+$ abundance ratio is estimated to be about 0.5 toward the protocluster clump, whereas it is about 3 in the other parts of the main filament. We identify six dense ridges with different $V_{\rm LSR}$. These ridges appear to converge toward the protocluster clump, suggesting that the collisions of these ridges may have triggered cluster formation. The collisions presumably happened within a few $\times \ 10^5$ yr because CCS is abundant only in such a short time. The short lifetime agrees with the fact that the number fraction of Class I objects, whose typical lifetime is $0.4 \times \ 10^5$ yr, is extremely high as about 70 percent in the protocluster clump. In the northern part, two ridges appear to have partially collided, forming a V-shape clump. In addition, we detected strong bipolar SiO emission that is due to the molecular outflow blowing out of the protostellar clump, as well as extended weak SiO emission that may originate from the filament collisions.

We have developed the Smoothed Bandpass Calibration (SBC) method and the best suitable scan pattern to optimize radio spectroscopic observations. Adequate spectral smoothing is applied to the spectrum toward OFF-source blank sky adjacent to a target source direction for the purpose of bandpass correction. Because the smoothing process reduces noise, the integration time for OFF-source scans can be reduced keeping the signal-to-noise ratio. Since the smoothing is not applied to ON-source scans, the spectral resolution for line features is kept. An optimal smoothing window is determined by bandpass flatness evaluated by Spectral Allan Variance (SAV). An efficient scan pattern is designed to the OFF-source scans within the bandpass stability timescale estimated by Time-based Allan Variance (TAV). We have tested the SBC using the digital spectrometer, VESPA, on the VERA Iriki station. For the targeted noise level of 5e-4 as a ratio to the system noise, the optimal smoothing window was 32 - 60 ch in the whole bandwidth of 1024 ch, and the optimal scan pattern was designed as a sequence of 70-s ON + 10-s OFF scan pairs. The noise level with the SBC was reduced by a factor of 1.74 compared with the conventional method. The total telescope time to achieve the goal with the SBC was 400 s, which was 1/3 of 1200 s required by the conventional way. Improvement in telescope time efficiency with the SBC was calculated as 3x, 2x and 1.3x for single-beam, dual-beam, and on-the-fly (OTF) scans, respectively. The SBC works to optimize scan patterns for observations from now, and also works to improve signal-to-noise ratios of archival data if ON- and OFF-source spectra are individually recorded, though the efficiency depends on the spectral stability of the receiving system.