162173 Ryugu, the target of Hayabusa2, has a round shape with an equatorial ridge, which is known as a spinning top-shape. A strong centrifugal force is a likely contributor to Ryugu's top-shaped features. Observations by Optical Navigation Camera onboard Hayabusa2 show a unique longitudinal variation in geomorphology; the western side of this asteroid, later called the western bulge, has a smooth surface and a sharp equatorial ridge, compared to the other side. Here, we propose a structural deformation process that generated the western bulge. Applying the mission-derived shape model, we employ a finite element model technique to analyze the locations that experience structural failure within the present shape. Assuming that materials are uniformly distributed, our model shows the longitudinal variation in structurally failed regions when the spin period is shorter than ~3.75 h. Ryugu is structurally intact in the subsurface region of the western bulge while other regions are sensitive to structural failure. We infer that this variation is indicative of the deformation process that occurred in the past, and the western bulge is more relaxed structurally than the other region. Our analysis also shows that this deformation process might occur at a spin period between ~3.5 h and ~3.0 h, providing the cohesive strength ranging between ~4 Pa and ~10 Pa.

We present visible and near-infrared observations of a near-Earth object (NEO), 2012 $\mathrm{TC_4}$. The NEO 2012 $\mathrm{TC_4}$ approached close to the Earth at a distance of about 50,000 km in October 2017. This close approach provided a practical exercise for planetary defense. This apparition was also an appropriate opportunity to investigate 2012 $\mathrm{TC_4}$, which is a monolithic asteroid \citep{Polishook13}. We conducted the observation campaign of 2012 $\mathrm{TC_4}$ using six small- and medium-sized telescopes. The multiband photometry analysis showed that the taxonomic class of 2012 $\mathrm{TC_4}$ to be an X-type. In particular, we successfully obtained the high time resolution lightcurve of 2012 $\mathrm{TC_4}$ with the Tomo-e Gozen camera, which is the world's first wide-field CMOS camera, mounted on the 1.05 m Schmidt telescope at Kiso Observatory. The shape and rotational motion models of 2012 $\mathrm{TC_4}$ were derived from the lightcurve. When 2012 $\mathrm{TC_4}$ was assumed to be a triaxial ellipsoid, the rotational and precession periods were 8.47 $\pm$ 0.01 min and 12.25 $\pm$ 0.01 min, respectively, with the long axis mode. This indicates that 2012 $\mathrm{TC_4}$ is a tumbling and monolithic asteroid. The shape models showed that the plausible axial lengths to be 6.2 $\times$ 8.0 $\times$ 14.9~m or 3.3 $\times$ 8.0 $\times$ 14.3~m. The flattened and elongated shape indicates that 2012 $\mathrm{TC_4}$ is a fragment produced by a impact event. We also estimated the excitation timescale, which implied that the impact event happened within $\sim$3 $\times$ 10$^{5}$ yr and 2012 $\mathrm{TC_4}$ has a fresh surface.

Asteroid (162173) Ryugu is the target object of Hayabusa2, an asteroid exploration and sample return mission led by Japan Aerospace Exploration Agency (JAXA). Ground-based observations indicate that Ryugu is a C-type near-Earth asteroid with a diameter of less than 1 km, but the knowledge of its detailed properties is still very limited. This paper summarizes our best understanding of the physical and dynamical properties of Ryugu based on remote sensing and theoretical modeling. This information is used to construct a design reference model of the asteroid that is used for formulation of mission operations plans in advance of asteroid arrival. Particular attention is given to the surface properties of Ryugu that are relevant to sample acquisition. This reference model helps readers to appropriately interpret the data that will be directly obtained by Hayabusa2 and promotes scientific studies not only for Ryugu itself and other small bodies but also for the Solar System evolution that small bodies shed light on.

We revisited a mass ejection phenomenon that occurred in asteroid P/2010 A2 in terms of the dynamical properties of the dust particles and large fragments. We constructed a model assuming anisotropic ejection within a solid cone-shaped jet and succeeded in reproducing the time-variant features in archival observational images over ~3 years from 2010 January to 2012 October. When we assumed that the dust particles and fragments were ejected in the same direction from a point where no object had been detected in any observations, the anisotropic model can explain all of the observations including (i) the unique dust cloud morphology, (ii) the trail surface brightness and (iii) the motions of the fragments. Our results suggest that the original body was shattered by an impact with the specific energy of Q* <~ 350 J/kg, and remnants of slow antipodal ejecta (i.e., anisotropic ejection in our model) were observed as P/2010 A2. The observed quantities are consistent with those obtained through laboratory impact experiments, supporting the idea that the P/2010 A2 event is the first evidence of the impact shattering occurred in the present main asteroid belt.