sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Herrera-Endoqui, M.

Normalized to: Herrera-Endoqui, M.

7 article(s) in total. 43 co-authors, from 1 to 6 common article(s). Median position in authors list is 4,0.

[1]  oai:arXiv.org:1908.04246  [pdf] - 1987427
The shapes of spiral arms in the S$^4$G survey and their connection with stellar bars
Comments: Accepted for publication in A&A (August 12, 2019). 18 pages, 19 figures, 4 tables, plus appendices (11 pages, 6 figures, 1 table)
Submitted: 2019-08-12, last modified: 2019-10-14
Spiral galaxies are common in the local Universe, but their formation, evolution, and interplay with bars remain poorly understood. We use a sample of 391 nearby galaxies from the S$^4$G survey to characterise the winding angle and amplitude of spiral arms as a function of disc properties, such as bar strength, in all kinds of spirals (grand-design, multi-armed, and flocculent). We derive global pitch angles in 3.6 $\mu$m de-projected images from i) average measurements of individual logarithmic spiral segments, and ii) for a subsample of 32 galaxies, from 2-D Fourier analyses. The strength of spirals is quantified from the tangential-to-radial force ratio and from the normalised $m=2$ Fourier density amplitudes. In galaxies with more than one measured logarithmic segment, the spiral pitch angle varies on average by $\sim 10^{\circ}$ between segments, but by up to $\gtrsim 15-20^{\circ}$. The distribution of the global pitch angle versus Hubble type ($T$) is very similar for barred and non-barred galaxies when $1 \lesssim T \lesssim 5$. Most spiral galaxies ($>90\%$) are barred for $T>5$. The pitch angle is not correlated with bar strength, and only weakly with spiral strength. The amplitude of spirals is correlated with bar strength (and less tightly, with bar length) for all types of spirals. The mean pitch angle is hardly correlated with the mass of the supermassive black hole (estimated from central stellar velocity dispersion), with central stellar mass concentration, or with shear, questioning previous results in the literature using smaller samples. We do not find observational evidence that spiral arms are driven by stellar bars or by invariant manifolds. Most likely, disks that are prone to the development of strong bars are also reactive to the formation of prominent spirals, explaining the observed coupling between bar and spiral amplitudes (Abridged).
[2]  oai:arXiv.org:1909.12880  [pdf] - 1970510
Rings and spiral arms: are they coupled with bars?
Comments: Proceedings of IAU Symposium 355, "The Realm of the Low-Surface-Brightness Universe", 2019, Eds. D. Valls-Gabaud, I. Trujillo & S. Okamoto, 4 pages, 4 figures
Submitted: 2019-09-27
Rings and spiral arms are distinctive features of many galaxies, and their properties are closely related to the disk dynamics. They are often associated to stellar bars, but the details of this connection are far from clear. We study the pitch angles of spiral arms and the frequency and dimensions of inner and outer rings as a function of disk parameters and the amplitude of non-axisymmetries in the S$^4$G survey. The ring fraction increases with bar Fourier density amplitude: this can be interpreted as evidence for the role of bars in ring formation. The sizes of inner rings, normalised by the disk size, are positively correlated with bar strength: this can be linked to the radial displacement of the inner 4:1 ultra-harmonic resonance while the bar grows and the pattern speed decreases. The fraction of rings is larger in barred galaxies than in their non-barred counterparts, but still $\sim 1/3$ ($\sim 1/4$) of the galaxies hosting inner (outer) rings are not barred. The amplitudes of bars and spirals are correlated for all types of spirals. However, on average, the pitch angles of spiral arms are roughly the same for barred and non-barred galaxies: this questions the role of bars exciting spiral structure. We conclude that the present-day coupling of rings, spiral arms, and bars is not as robust as predicted by simulations.
[3]  oai:arXiv.org:1909.09762  [pdf] - 1981250
Torus Constraints in ANEPD-CXO245: A Compton-thick AGN with Double-Peaked Narrow Lines
Comments: 8 pages, 3 figures. Accepted to Astrophysical Journal (Letters)
Submitted: 2019-09-20
We report on the torus constraints of the Compton-thick AGN with double-peaked optical narrow line region (NLR) emission lines, ANEPD-CXO245, at z=0.449 in the AKARI NEP Deep Field. The unique infrared data on this field, including those from the nine-band photometry over 2-24 $\mu$m with the AKARI Infrared Camera (IRC), and the X-ray spectrum from Chandra allow us to constrain torus parameters such as the torus optical depth, X-ray absorbing column, torus angular width ($\sigma$) and viewing angle ($i$). We analyze the X-ray spectrum as well as the UV-optical-infrared spectral energy distribution (UOI-SED) with clumpy torus models in X-ray (XCLUMPY; Tanimoto et al. 2019) and infrared (CLUMPY; Nenkova et al. 2008) respectively. From our current data, the constraints on $\sigma$--$i$ from both X-rays and UOI show that the line of sight crosses the torus as expected for a type 2 AGN. We obtain a small X-ray scattering fraction (<0.1%), which suggests narrow torus openings, giving preference to the bi-polar outflow picture of the double-peaked profile. Comparing the optical depth of the torus from the UOI-SED and the absorbing column density $N_{\rm H}$ from the X-ray spectrum, we find that the gas-to-dust ratio is $\gtrsim 4$ times larger than the Galactic value.
[4]  oai:arXiv.org:1509.06743  [pdf] - 1442593
Characterization of galactic bars from 3.6 $\mu$m S$^{4}$G imaging
Comments: 39 pages, 30 figures, accepted for publication in A&A (July 27, 2015)
Submitted: 2015-09-22, last modified: 2016-07-25
We use the Spitzer Survey of Stellar Structure in Galaxies (S$^{4}$G) 3.6 $\mu$m imaging to study the properties (length and strength) and fraction of bars at $z=0$. We use the maximum of tangential-to-radial force ratio in the bar region ($Q_{\rm b}$) as a measure of the bar induced perturbation strength for a sample of $\sim 600$ barred galaxies. Bars are also characterized from the maximum of the normalized m=2 Fourier density amplitude ($A_{2}^{\rm max}$) and the bar maximum isophotal ellipticity ($\varepsilon$). Combining our force calculations with the HI kinematics from the literature we get an estimate of the halo-to-stellar mass ratios ($M_{\rm h}/M_{\ast}$) within the optical disk, which are in good agreement with studies based on weak lensing analysis, abundance matching and halo occupation distribution methods. By further using the Universal Rotation Curve models we obtain a first-order model of the rotation curve decomposition of $1128$ disk galaxies. We find that the dilution of $Q_{\rm b}$ by the halo becomes important for later types, implying $\sim 20-25\%$ reduction for $T = 7-10$. Whether the halo correction is included or not, the mean $Q_{\rm b}$ shows an increasing trend with $T$. Late-type bars are longer than previously found in the literature. We find possible evidence for the growth of bars within a Hubble time, as (1) bars in early-type galaxies show larger density amplitudes and disk-relative sizes than their intermediate-type counterparts, and (2) long bars are typically strong. We also observe two clearly distinct types of bars, between early and intermediate-type galaxies ($T<5$) on one side, and the late-type systems on the other, based on the differences in the bar properties. Most likely this distinction is connected to the larger halo-to-stellar ratio that we observe in later types, affecting the disk stability properties (Abridged).
[5]  oai:arXiv.org:1509.05328  [pdf] - 1296315
Catalogue of the morphological features in the Spitzer Survey of Stellar Structure in Galaxies (S$^4$G)
Comments: 17 pages, 12 figures, accepted for publication in A&A
Submitted: 2015-09-17, last modified: 2015-10-20
A catalogue of the morphological features for the complete Spitzer Survey of Stellar Structure in Galaxies (S$^4$G), including 2352 nearby galaxies, is presented. The measurements are made using 3.6 $\mu$m images, largely tracing the old stellar population; at this wavelength the effects of dust are also minimal. The measured features are the sizes, ellipticities, and orientations of bars, rings, ringlenses, and lenses. Measured in a similar manner are also barlenses (lens-like structures embedded in the bars), which are not lenses in the usual sense, being rather the more face-on counterparts of the boxy/peanut structures in the edge-on view. In addition, pitch angles of spiral arm segments are measured for those galaxies where they can be reliably traced. More than one pitch angle may appear for a single galaxy. All measurements are made in a human-supervised manner so that attention is paid to each galaxy. We used isophotal analysis, unsharp masking, and fitting ellipses to measured structures. We find that the sizes of the inner rings and lenses normalized to barlength correlate with the galaxy mass: the normalized sizes increase toward the less massive galaxies; it has been suggested that this is related to the larger dark matter content in the bar region in these systems. Bars in the low mass galaxies are also less concentrated, likely to be connected to the mass cut-off in the appearance of the nuclear rings and lenses. We also show observational evidence that barlenses indeed form part of the bar, and that a large fraction of the inner lenses in the non-barred galaxies could be former barlenses in which the thin outer bar component has dissolved.
[6]  oai:arXiv.org:1312.0866  [pdf] - 1267850
ARRAKIS: Atlas of Resonance Rings As Known In the S4G
Comments: Accepted for publication in A&A. Some figures have a degraded resolution and the appendix with images of all the galaxies in ARRAKIS has been omitted. A version of the paper with the full resolution images and with the omitted appendix can be found at http://cc.oulu.fi/~scomeron/arrakis_v12_printer.pdf
Submitted: 2013-12-03, last modified: 2015-08-28
Resonance rings are the consequence of secular evolution processes that redistribute material and angular momentum in discs. We produced a Catalogue and an Atlas of the rings detected in the Spitzer Survey of Stellar Structure in Galaxies (S4G) and to conduct a statistical study of the data in the Catalogue. We traced the contours of rings previously identified by Buta et al. (in preparation) and fitted them with ellipses. We found the orientation of bars by studying the galaxy ellipse fits from S4G's Pipeline 4. We used the galaxy orientation data obtained by S4G's Pipeline 4 to obtain intrinsic ellipticities and orientations of rings and the bars. ARRAKIS contains data on 724 ringed galaxies in the S4G. The frequency of resonance rings in the S4G is of 16+-1% and 35+-1% for outer and inner features, respectively. Outer rings are mostly found in Hubble stages -1<=T<=4. Inner rings are found in a distribution that covers the range -1<=T<=7. We confirm that outer rings have two preferred orientations, parallel and perpendicular to the bar. We confirm a tendency for inner rings to be oriented parallel to the bar, but we find that a significant fraction (~50%) of them have random orientations with respect to the bar. These misaligned inner rings are mostly found in late-type galaxies (T>=4). This may be due to spiral modes decoupled from the bar dominating the Fourier amplitude spectrum at the radius of the inner ring. We find that the fraction of barred galaxies hosting outer (inner) rings is ~1.7 times (~1.3 times) that in unbarred galaxies. The fact that rings are only mildly favoured by bars suggests that those in unbarred galaxies either formed due to weak departures from the axisymmetry of the galactic potential or that they are born because of bars that have been destroyed after the ring formation.
[7]  oai:arXiv.org:1406.1418  [pdf] - 862901
Milky Way mass galaxies with X-shaped bulges are not rare in the local Universe
Comments: First submission (sent to astro-ph in June 2014) replaced with the version accepted to MNRAS Letters (Vol. 444, L80-84). The biggest difference to the previous submission is Fig. 2
Submitted: 2014-06-05, last modified: 2014-08-22
Boxy/Peanut/X-shaped (B/P/X) bulges are studied using the 3.6 mum images from the Spitzer Survey of Stellar Structure in Galaxies, and the K_s-band images from the Near-IR S0 galaxy Survey. They are compared with the properties of barlenses, defined as lens-like structures embedded in bars, with sizes of about 50% of bars and axial ratios of 0.6-0.9. Based on observations and recent simulation models we show evidence that barlenses are the more face-on counterparts of B/P/X-shaped bulges. Using unsharp masks 18 new X-shaped structures are identified, covering a large range of galaxy inclinations. The similar masses and red B-3.6 mum colors of the host galaxies, and the fact that the combined axial ratio distribution of the host galaxy disks is flat, support the interpretation that barlenses and X-shapes are physically the same phenomenon. In Hubble types -3<T<2 even half of the bars contain either a barlens or an X-shaped structure. Our detailed 2D multi-component decompositions for 29 galaxies, fitting the barlens/X-shape with a separate component, indicate very small or non-existent classical bulges. Taking into account that the structures we study have similar host galaxy masses as the Milky Way (MW), our results imply that MW mass galaxies with no significant classical bulges are common in the nearby Universe.