Characterizing the epoch of reionization (EoR) at $z\gtrsim 6$ via the redshifted 21 cm line of neutral Hydrogen (HI) is critical to modern astrophysics and cosmology, and thus a key science goal of many current and planned low-frequency radio telescopes. The primary challenge to detecting this signal is the overwhelmingly bright foreground emission at these frequencies, placing stringent requirements on the knowledge of the instruments and inaccuracies in analyses. Results from these experiments have largely been limited not by thermal sensitivity but by systematics, particularly caused by the inability to calibrate the instrument to high accuracy. The interferometric bispectrum phase is immune to antenna-based calibration and errors therein, and presents an independent alternative to detect the EoR HI fluctuations while largely avoiding calibration systematics. Here, we provide a demonstration of this technique on a subset of data from the Hydrogen Epoch of Reionization Array (HERA) to place approximate constraints on the brightness temperature of the intergalactic medium (IGM). From this limited data, at $z=7.7$ we infer "$1\sigma$" upper limits on the IGM brightness temperature to be $\le 316$ "pseudo" mK at $\kappa_\parallel=0.33$ "pseudo" $h$ Mpc$^{-1}$ (data-limited) and $\le 1000$ "pseudo" mK at $\kappa_\parallel=0.875$ "pseudo" $h$ Mpc$^{-1}$ (noise-limited). The "pseudo" units denote only an approximate and not an exact correspondence to the actual distance scales and brightness temperatures. By propagating models in parallel to the data analysis, we confirm that the dynamic range required to separate the cosmic HI signal from the foregrounds is similar to that in standard approaches, and the power spectrum of the bispectrum phase is still data-limited (at $\gtrsim 10^6$ dynamic range) indicating scope for further improvement in sensitivity as the array build-out continues.

The central challenge in 21~cm cosmology is isolating the cosmological signal from bright foregrounds. Many separation techniques rely on the accurate knowledge of the sky and the instrumental response, including the antenna primary beam. For drift-scan telescopes such as the Hydrogen Epoch of Reionization Array \citep[HERA, ][]{DeBoer2017} that do not move, primary beam characterization is particularly challenging because standard beam-calibration routines do not apply \citep{Cornwell2005} and current techniques require accurate source catalogs at the telescope resolution. We present an extension of the method from \citet{Pober2012} where they use beam symmetries to create a network of overlapping source tracks that break the degeneracy between source flux density and beam response and allow their simultaneous estimation. We fit the beam response of our instrument using early HERA observations and find that our results agree well with electromagnetic simulations down to a -20~dB level in power relative to peak gain for sources with high signal-to-noise ratio. In addition, we construct a source catalog with 90 sources down to a flux density of 1.4~Jy at 151~MHz.

The key challenge in the observation of the redshifted 21-cm signal from cosmic reionization is its separation from the much brighter foreground emission. Such separation relies on the different spectral properties of the two components, although, in real life, the foreground intrinsic spectrum is often corrupted by the instrumental response, inducing systematic effects that can further jeopardize the measurement of the 21-cm signal. In this paper, we use Gaussian Process Regression to model both foreground emission and instrumental systematics in $\sim 2$ hours of data from the Hydrogen Epoch of Reionization Array. We find that a simple co-variance model with three components matches the data well, giving a residual power spectrum with white noise properties. These consist of an "intrinsic" and instrumentally corrupted component with a coherence-scale of 20 MHz and 2.4 MHz respectively (dominating the line of sight power spectrum over scales $k_{\parallel} \le 0.2$ h cMpc$^{-1}$) and a baseline dependent periodic signal with a period of $\sim 1$ MHz (dominating over $k_{\parallel} \sim 0.4 - 0.8$h cMpc$^{-1}$) which should be distinguishable from the 21-cm EoR signal whose typical coherence-scales is $\sim 0.8$ MHz.

Future generations of radio interferometers targeting the 21\,cm with $N\gg 1000$ antennas could face a significant computational challenge in building correlators with the traditional architecture, whose computational resource requirement scales as $\mathcal{O}(N^2)$ with array size. The fundamental output of such correlators are the cross-correlation products of all antenna pairs in the array. The FFT-correlator architecture reduces the computational resources scaling to $\mathcal{O}(N\log_2N)$ by computing cross-correlation products through a spatial Fourier transform. However, the output of the FFT-correlator is meaningful only when the input antenna voltages are gain- and phase-calibrated. Traditionally, interferometric calibration has used the $\mathcal{O}(N^2)$ cross-correlations produced by a standard correlator. This paper proposes calibration schemes for a real-time calibrator that could work in parallel with an FFT-correlator as a self-contained $\mathcal{O}(N\log_2{N})$ correlator system that can be scaled to large-N redundant arrays. We discuss two calibration schemes that be employed by this calibrator, and compare their performance and scalability. We find that both the calibration schemes presented in this paper result in gain variance that decreases as $1/\log_2{(N)}$ with increase in the size of the array.

In 21 cm cosmology, precision calibration is key to the separation of the neutral hydrogen signal from bright astrophysical foregrounds. If not properly calibrated, each antenna element's complex gain can impart spectral structure on otherwise spectrally-smooth foregrounds, complicating that statistical separation. The Hydrogen Epoch of Reionization Array (HERA), an interferometer specialized for 21 cm cosmology and now under construction in South Africa, was designed to be largely calibrated using the self-consistency of repeated measurements of the same interferometric modes. This technique, known as redundant-baseline calibration resolves most of the internal degrees of freedom in the calibration problem. It assumes, however, on antenna elements with identical primary beams placed precisely on a redundant grid. In this work, we review the detailed implementation of the algorithms enabling redundant-baseline calibration and report results with HERA data. We quantify the effects of real-world non-redundancy and how they compare to the idealized scenario in which redundant measurements differ only in their noise realizations. Finally, we study how non-redundancy can produce spurious temporal structure in our calibration solutions---both in data and in simulations---and present strategies for mitigating that structure.

We discuss absolute calibration strategies for Phase I of the Hydrogen Epoch of Reionization Array (HERA), which aims to measure the cosmological 21 cm signal from the Epoch of Reionization (EoR). HERA is a drift-scan array with a 10 degree wide field of view, meaning bright, well-characterized point source transits are scarce. This, combined with HERA's redundant sampling of the uv plane and the modest angular resolution of the Phase I instrument, make traditional sky-based and self-calibration techniques difficult to implement with high dynamic range. Nonetheless, in this work we demonstrate calibration for HERA using point source catalogues and electromagnetic simulations of its primary beam. We show that unmodeled diffuse flux and instrumental contaminants can corrupt the gain solutions, and present a gain smoothing approach for mitigating their impact on the 21 cm power spectrum. We also demonstrate a hybrid sky and redundant calibration scheme and compare it to pure sky-based calibration, showing only a marginal improvement to the gain solutions at intermediate delay scales. Our work suggests that the HERA Phase I system can be well-calibrated for a foreground-avoidance power spectrum estimator by applying direction-independent gains with a small set of degrees of freedom across the frequency and time axes.

We present a study of internal reflection and cross coupling systematics in Phase I of the Hydrogen Epoch of Reionization Array (HERA). In a companion paper, we outlined the mathematical formalism for such systematics and presented algorithms for modeling and removing them from the data. In this work, we apply these techniques to data from HERA's first observing season as a method demonstration. The data show evidence for systematics that, without removal, would hinder a detection of the 21 cm power spectrum for the targeted EoR line-of-sight modes in the range 0.2 < k_parallel < 0.5\ h^-1 Mpc. After systematic removal, we find we can recover these modes in the power spectrum down to the integrated noise-floor of a nightly observation, achieving a dynamic range in the EoR window of 10^-6 in power (mK^2 units) with respect to the bright galactic foreground signal. In the absence of other systematics and assuming the systematic suppression demonstrated here continues to lower noise levels, our results suggest that fully-integrated HERA Phase I may have the capacity to set competitive upper limits on the 21 cm power spectrum. For future observing seasons, HERA will have upgraded analog and digital hardware to better control these systematics in the field.

The detection of the Epoch of Reionization (EoR) delay power spectrum using a "foreground avoidance method" highly depends on the instrument chromaticity. The systematic effects induced by the radio-telescope spread the foreground signal in the delay domain, which contaminates the EoR window theoretically observable. Therefore, it is essential to understand and limit these chromatic effects. This paper describes a method to simulate the frequency and time responses of an antenna, by simultaneously taking into account the analogue RF receiver, the transmission cable, and the mutual coupling caused by adjacent antennas. Applied to the Hydrogen Epoch of Reionization Array (HERA), this study reveals the presence of significant reflections at high delays caused by the 150-m cable which links the antenna to the back-end. Besides, it shows that waves can propagate from one dish to another one through large sections of the array because of mutual coupling. In this more realistic approach, the simulated system time response is attenuated by a factor $10^{4}$ after a characteristic delay which depends on the size of the array and on the antenna position. Ultimately, the system response is attenuated by a factor $10^{5}$ after 1400 ns because of the reflections in the cable, which corresponds to characterizable ${k_\parallel}$-modes above 0.7 $h \rm{Mpc}^{-1}$ at 150 MHz. Thus, this new study shows that the detection of the EoR signal with HERA Phase I will be more challenging than expected. On the other hand, it improves our understanding of the telescope, which is essential to mitigate the instrument chromaticity.

In this white paper, we lay out a US roadmap for high-redshift 21 cm cosmology (30 < z < 6) in the 2020s. Beginning with the currently-funded HERA and MWA Phase II projects and advancing through the decade with a coordinated program of small-scale instrumentation, software, and analysis projects targeting technology development, this roadmap incorporates our current best understanding of the systematics confronting 21 cm cosmology into a plan for overcoming them, enabling next-generation, mid-scale 21 cm arrays to be proposed late in the decade. Submitted for consideration by the Astro2020 Decadal Survey Program Panel for Radio, Millimeter, and Submillimeter Observations from the Ground as a Medium-Sized Project.

Radio Frequency Interference (RFI) is an ever-present limiting factor among radio telescopes even in the most remote observing locations. When looking to retain the maximum amount of sensitivity and reduce contamination for Epoch of Reionization studies, the identification and removal of RFI is especially important. In addition to improved RFI identification, we must also take into account computational efficiency of the RFI-Identification algorithm as radio interferometer arrays such as the Hydrogen Epoch of Reionization Array grow larger in number of receivers. To address this, we present a Deep Fully Convolutional Neural Network (DFCN) that is comprehensive in its use of interferometric data, where both amplitude and phase information are used jointly for identifying RFI. We train the network using simulated HERA visibilities containing mock RFI, yielding a known "ground truth" dataset for evaluating the accuracy of various RFI algorithms. Evaluation of the DFCN model is performed on observations from the 67 dish build-out, HERA-67, and achieves a data throughput of 1.6$\times 10^{5}$ HERA time-ordered 1024 channeled visibilities per hour per GPU. We determine that relative to an amplitude only network including visibility phase adds important adjacent time-frequency context which increases discrimination between RFI and Non-RFI. The inclusion of phase when predicting achieves a Recall of 0.81, Precision of 0.58, and $F_{2}$ score of 0.75 as applied to our HERA-67 observations.

Here, we present initial results from the ALFABURST radio transient survey, which is currently running in a commensal mode with the ALFA receiver at the Arecibo telescope. We observed for a total of 1400 hours and have detected single pulses from known pulsars but did not detect any FRBs. The non-detection of FRBs is consistent with the current FRB sky rates.