We present an empirical correction of sky coordinates of X-ray photons obtained with the XIS aboard the Suzaku satellite to improve the source position accuracy and restore the point-spread function (PSF). The XIS images are known to have an uncertainty in position of up to 1 arcmin, and to show considerable degradations of the PSF. These problems are caused by a drifting of the satellite attitude due to thermal distortion of the side panel 7, where the attitude control system is mounted. We found that the position error averaged over a pointing observation can be largely reduced by using the relation between the deviation of the source position in the DETX direction and the ecliptic latitude of the pointing target. We parameterized the wobbling of the source position synchronized with the satellite orbital period with temperatures of onboard radiators and elapsed time since the night-day transition of the spacecraft. We developed software, aeattcor, to correct the image drift using these parameters, and applied it to 27 point-source images. We show that the radius of the 90% error circle of the source position was reduced to 19 arcsec and the PSF was sharpened. These improvements have enhanced the scientific capability of the Suzaku XIS.

We have developed a framework for the Monte-Carlo simulation of the X-Ray Telescopes (XRT) and the X-ray Imaging Spectrometers (XIS) onboard Suzaku, mainly for the scientific analysis of spatially and spectroscopically complex celestial sources. A photon-by-photon instrumental simulator is built on the ANL platform, which has been successfully used in ASCA data analysis. The simulator has a modular structure, in which the XRT simulation is based on a ray-tracing library, while the XIS simulation utilizes a spectral "Redistribution Matrix File" (RMF), generated separately by other tools. Instrumental characteristics and calibration results, e.g., XRT geometry, reflectivity, mutual alignments, thermal shield transmission, build-up of the contamination on the XIS optical blocking filters (OBF), are incorporated as completely as possible. Most of this information is available in the form of the FITS (Flexible Image Transport System) files in the standard calibration database (CALDB). This simulator can also be utilized to generate an "Ancillary Response File" (ARF), which describes the XRT response and the amount of OBF contamination. The ARF is dependent on the spatial distribution of the celestial target and the photon accumulation region on the detector, as well as observing conditions such as the observation date and satellite attitude. We describe principles of the simulator and the ARF generator, and demonstrate their performance in comparison with in-flight data.