We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of commercially-available, polytetrafluoroethylene-based, dielectric sheet material. The lenslet coating is molded to fit the 150 mm diameter arrays directly while the large-diameter lenses are coated using a tiled approach. We review the fabrication processes for both prescriptions then discuss laboratory measurements of their transmittance and reflectance. In addition, we present the inferred refractive indices and loss tangents for the coating materials and the aluminum oxide substrate. We find that at 150 GHz and 300 K the large-format coating sample achieves (97 +/- 2)% transmittance and the lenslet coating sample achieves (94 +/- 3)% transmittance.

Recent observations suggest that proximate damped Ly$\alpha$ (PDLA) systems can be used to study the host galaxies of Quasi-stellar objects (QSOs), because the PDLAs can block the bright point-spread-function (PSF) from central QSOs. Using six-orbits of narrowband imaging with $\it{HST}$/WFC3, we present the first high resolution narrowband image of the Ly$\alpha$ emission in the PDLA trough of the QSO SDSSJ115432.67-021537.9 . We detect one major component and one minor component in the narrowband imaging. Combining the $\it{HST}$/WFC3 imaging with deep Magellan/MagE spectra, we measure that the Ly$\alpha$ flux F$_{\rm{Ly\alpha}}$ = 1.56$\pm0.10 \times10^{-16}$ $\rm{erg\ s^{-1}\ cm^{-2}}$, which is among the luminous ($\approx$ 2.7 L$^{\star}_{\rm{Ly\alpha}}$) Ly$\alpha$ emitters at $\it{z} =$ 2.19. The $\rm{Ly\alpha}$-based star formation rate (SFR) is $\sim$ 7 $\textrm{M_{\sun} \ yr^{-1}}$. These observational results favor that the star formation from the host galaxy could be the main mechanism to power the Ly$\alpha$ emission. This new method sheds new light on the study of the kinematic structure and the spatial distribution of the extended Ly$\alpha$ emitting regions around the QSO host.

We report observations of a transient source \fermi\ from radio to \grs. \fermi\ was discovered by the {\it Fermi-LAT} in May 2017. Follow-up {\it Swift-XRT} observations revealed three flaring episodes through March 2018, and the peak X-ray flux is about $10^3$ higher than the {\it ROSAT all-sky survey (RASS)} flux upper limit. Optical spectral measurements taken by the {\it Magellan 6.5-m telescope} and the {\it Lick-Shane telescope} both show a largely featureless spectrum, strengthening the BL Lac interpretation first proposed by \citet{Bruni18}. The optical and mid-infrared (MIR) emission goes to a higher state in 2018, when the flux in high energies goes down to a lower level. Our {\it RATAN-600m} measurements at 4.8~GHz and 8.2~GHz do not indicate any significant radio flux variation over the monitoring seasons in 2017 and 2018, nor deviate from the archival {\it NVSS} flux level. During GeV flaring times, the spectrum is very hard ($\Gamma_\gamma\sim$1.7) in the GeV band and at times also very hard (($\Gamma_{\rm X}\lesssim2$) in the X-rays, similar to a high-synchrotron-peak (or even an extreme) BL Lac object, making \fermi\ a good target for ground-based {\it Cherenkov telescopes}.

We consider the structure formation in the nonlocal gravity model proposed recently by Deser and Woodard (DW-2019 model), which can not only reproduce the $\Lambda$CDM cosmology without fine-tuning puzzle but also may provide a screening mechanism for free. By using the direct numerical method of the reconstructing technique, the nonlocal distortion function $f(Y)$ is fixed as $f(Y)\simeq\boldsymbol{e}^{2.153(Y-16.97)}$ which has a small deviation with the fitted function proposed by Deser and Woodard. Based on the numerical results, we plotted the curve of the growth rate $f\sigma_8(z)$ under the DW-2019 model, which shows this model is not ruled out by the $f\sigma_8$ data from the Redshift-space distortions measurements. The evolving curve of the growth rate has a distinct plummet at $z\simeq0.39$, which is a great difference with the DW model. The possible reason is that the DW-2019 model provides the strong nonlocal effect, which behaves as the anisotropic effect to influence the matter perturbation in the low-redshift range. Finally the qualitative analysis of the screening mechanism is discussed by considering the spacial dependence of the nonlocal modification in the small-scale range.

The cosmic microwave background (CMB) encodes information about the content and evolution of the universe. The presence of light, weakly interacting particles impacts the expansion history of the early universe, which alters the temperature and polarization anisotropies of the CMB. In this way, current measurements of the CMB place interesting constraints on the neutrino energy density and mass, as well as on the abundance of other possible light relativistic particle species. We present the status of an on-going 1500 sq. deg. survey with the SPT-3G receiver, a new mm-wavelength camera on the 10-m diameter South Pole Telescope (SPT). The SPT-3G camera consists of 16,000 superconducting transition edge sensors, a 10x increase over the previous generation camera, which allows it to map the CMB with an unprecedented combination of sensitivity and angular resolution. We highlight projected constraints on the abundance of sterile neutrinos and the sum of the neutrino masses for the SPT-3G survey, which could help determine the neutrino mass hierarchy.

SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of these detector wafers was replaced by a new wafer fabricated with Al-Mn TESs instead of the Ti/Au design originally deployed for SPT-3G. We present the results of in-lab characterization and on-sky performance of this Al-Mn wafer, including electrical and thermal properties, optical efficiency measurements, and noise-equivalent temperature. In addition, we discuss and account for several calibration-related systematic errors that affect measurements made using frequency-domain multiplexing readout electronics.

Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current receiver on the South Pole Telescope, SPT-3G, uses a 68x fMux system to operate its large-format camera of $\sim$16,000 TES bolometers. We present here the successful implementation and performance of the SPT-3G readout as measured on-sky. Characterization of the noise reveals a median pair-differenced 1/f knee frequency of 33 mHz, indicating that low-frequency noise in the readout will not limit SPT-3G's measurements of sky power on large angular scales. Measurements also show that the median readout white noise level in each of the SPT-3G observing bands is below the expectation for photon noise, demonstrating that SPT-3G is operating in the photon-noise-dominated regime.

Changing look active-galatic-nuclei (CL AGNs) can yield considerable insight into accretion physics as well as the co-evolution of black holes and their host galaxies. A large sample of these CL AGNs is essential to achieve the latter goal. We propose an effective method to select CL candidates from spectroscopic quasar catalogs using the mid-infrared (MIR) variability information derived from ALL-WISE/NEOWISE data releases. Our primary selection criteria include both a large amplitude flux variation and a transition of MIR color from an AGN to a normal galaxy. A pilot spectroscopic follow-up of 7 candidates among about 300 candidates selected from Sloan Digital Sky Survey low-redshift (z<0.5) AGN sample results in 6 new turn-off CL AGNs. We expect to obtain hundreds of CL AGNs once full spectroscopic follow-up of the sample is carried out.

During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization pixels, read out using 68x frequency-domain multiplexing. Here we discuss design, assembly, and layout of the modules, as well as early performance characterization of the first-year array, including yield and detector properties.

The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics motivates the development of quasi-optically-coupled (lenslet-coupled), multi-chroic detectors. These detectors can be sensitive across a broader bandwidth compared to waveguide-coupled detectors. However, the increase in bandwidth comes at a cost: the lenses (up to $\sim$700 mm diameter) and lenslets ($\sim$5 mm diameter, hemispherical lenses on the focal plane) used in these systems are made from high-refractive-index materials (such as silicon or amorphous aluminum oxide) that reflect nearly a third of the incident radiation. In order to maximize the faint CMB signal that reaches the detectors, the lenses and lenslets must be coated with an anti-reflective (AR) material. The AR coating must maximize radiation transmission in scientifically interesting bands and be cryogenically stable. Such a coating was developed for the third generation camera, SPT-3G, of the South Pole Telescope (SPT) experiment, but the materials and techniques used in the development are general to AR coatings for mm-wave optics. The three-layer polytetrafluoroethylene-based AR coating is broadband, inexpensive, and can be manufactured with simple tools. The coating is field tested; AR coated focal plane elements were deployed in the 2016-2017 austral summer and AR coated reimaging optics were deployed in 2017-2018.

The SPT-3G receiver was commissioned in early 2017 on the 10-meter South Pole Telescope (SPT) to map anisotropies in the cosmic microwave background (CMB). New optics, detector, and readout technologies have yielded a multichroic, high-resolution, low-noise camera with impressive throughput and sensitivity, offering the potential to improve our understanding of inflationary physics, astroparticle physics, and growth of structure. We highlight several key features and design principles of the new receiver, and summarize its performance to date.

The third-generation instrument for the 10-meter South Pole Telescope, SPT-3G, was first installed in January 2017. In addition to completely new cryostats, secondary telescope optics, and readout electronics, the number of detectors in the focal plane has increased by an order of magnitude from previous instruments to ~16,000. The SPT-3G focal plane consists of ten detector modules, each with an array of 269 trichroic, polarization-sensitive pixels on a six-inch silicon wafer. Within each pixel is a broadband, dual-polarization sinuous antenna; the signal from each orthogonal linear polarization is divided into three frequency bands centered at 95, 150, and 220 GHz by in-line lumped element filters and transmitted via superconducting microstrip to Ti/Au transition-edge sensor (TES) bolometers. Properties of the TES film, microstrip filters, and bolometer island must be tightly controlled to achieve optimal performance. For the second year of SPT-3G operation, we have replaced all ten wafers in the focal plane with new detector arrays tuned to increase mapping speed and improve overall performance. Here we discuss the TES superconducting transition temperature and normal resistance, detector saturation power, bandpasses, optical efficiency, and full array yield for the 2018 focal plane.

The South Pole Telescope (SPT) is a millimeter-wavelength telescope designed for high-precision measurements of the cosmic microwave background (CMB). The SPT measures both the temperature and polarization of the CMB with a large aperture, resulting in high resolution maps sensitive to signals across a wide range of angular scales on the sky. With these data, the SPT has the potential to make a broad range of cosmological measurements. These include constraining the effect of massive neutrinos on large-scale structure formation as well as cleaning galactic and cosmological foregrounds from CMB polarization data in future searches for inflationary gravitational waves. The SPT began observing in January 2017 with a new receiver (SPT-3G) containing $\sim$16,000 polarization-sensitive transition-edge sensor bolometers. Several key technology developments have enabled this large-format focal plane, including advances in detectors, readout electronics, and large millimeter-wavelength optics. We discuss the implementation of these technologies in the SPT-3G receiver as well as the challenges they presented. In late 2017 the implementations of all three of these technologies were modified to optimize total performance. Here, we present the current instrument status of the SPT-3G receiver.

The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lumped element filters. Ten detector wafers populate the focal plane, which is coupled to the sky via a large-aperture optical system. Here we present the frequency band characterization with Fourier transform spectroscopy, measurements of optical time constants, beam properties, and optical and polarization efficiencies of the focal plane. The detectors have frequency bands consistent with our simulations, and have high average optical efficiency which is 86%, 77% and 66% for the 95, 150 and 220 GHz detectors. The time constants of the detectors are mostly between 0.5 ms and 5 ms. The beam is round with the correct size, and the polarization efficiency is more than 90% for most of the bolometers

Recent observations have suggested that the CIII]$\lambda1907/1909$ emission lines could be alternative diagnostic lines for galaxies in the reionization epoch. We use the F128N narrowband filter on the Hubble Space Telescope's ($\it{HST}$) Wide Field Camera 3 (WFC3) to search for CIII] emission in a sample of five galaxies at z = 5.7 in the Subaru Deep Field and the Subaru/XMM-Newton Deep Field. Using the F128N narrowband imaging, together with the broadband imaging, we do not detect CIII] emission for the five galaxies with $J_{\rm{AB}}$ ranging from 24.10 -- 27.00 in our sample. For the brightest galaxy J132416.13+274411.6 in our sample (z = 5.70, $J_{\rm{AB}} = 24.10$), which has a significantly higher signal to noise, we report a CIII] flux of $3.34\pm1.81 \times 10^{-18}$ $\mathrm{erg\ s^{-1}\ cm^{-2}}$, which places a stringent 3-$\rm\sigma$ upper limit of $5.43\times 10^{-18}$ $\mathrm{erg\ s^{-1}\ cm^{-2}}$ on CIII] flux and 6.57 \AA\ on the CIII] equivalent width. Using the stacked image, we put a 3-$\rm\sigma$ upper limit on the mean CIII] flux of $\mathrm{2.55\times10^{-18}\ erg\ s^{-1}\ cm^{-2}}$, and a 3-$\rm\sigma$ upper limit on the mean CIII] equivalent width of 4.20 {\AA} for this sample of galaxies at z = 5.70. Combined with strong CIII] detection reported among high-z galaxies in the literature, our observations suggest that the equivalent widths of CIII] from galaxies at z $>$ 5.70 exhibit a wide range of distribution. Our strong limits on CIII] emission could be used as a guide for future observations in the reionization epoch.

We present the first discoveries from a survey of $z\gtrsim6$ quasars using imaging data from the DECam Legacy Survey (DECaLS) in the optical, the UKIRT Deep Infrared Sky Survey (UKIDSS) and a preliminary version of the UKIRT Hemisphere Survey (UHS) in the near-IR, and ALLWISE in the mid-IR. DECaLS will image 9000 deg$^2$ of sky down to $z_{\rm AB}\sim23.0$, and UKIDSS and UHS, which will map the northern sky at $0<DEC<+60^{\circ}$, reaching $J_{\rm VEGA}\sim19.6$ (5-$\sigma$). The combination of these datasets allows us to discover quasars at redshift $z\gtrsim7$ and to conduct a complete census of the faint quasar population at $z\gtrsim6$. In this paper, we report on the selection method of our search, and on the initial discoveries of two new, faint $z\gtrsim6$ quasars and one new $z=6.63$ quasar in our pilot spectroscopic observations. The two new $z\sim6$ quasars are at $z=6.07$ and $z=6.17$ with absolute magnitudes at rest-frame wavelength 1450 \AA\ being $M_{1450}=-25.83$ and $M_{1450}=-25.76$, respectively. These discoveries suggest that we can find quasars close to or fainter than the break magnitude of the Quasar Luminosity Function (QLF) at $z\gtrsim6$. The new $z=6.63$ quasar has an absolute magnitude of $M_{1450}=-25.95$. This demonstrates the potential of using the combined DECaLS and UKIDSS/UHS datasets to find $z\gtrsim7$ quasars. Extrapolating from previous QLF measurements, we predict that these combined datasets will yield $\sim200$ $z\sim6$ quasars to $z_{\rm AB} < 21.5$, $\sim1{,}000$ $z\sim6$ quasars to $z_{\rm AB}<23$, and $\sim 30$ quasars at $z>6.5$ to $J_{\rm VEGA}<19.5$.

We present initial results from the first systematic survey of luminous $z\sim 5.5$ quasars. Quasars at $z \sim$ 5.5, the post-reionization epoch, are crucial tools to explore the evolution of intergalactic medium, quasar evolution and the early super-massive black hole growth. However, it has been very challenging to select quasars at redshifts 5.3 $\le z \le$ 5.7 using conventional color selections, due to their similar optical colors to late-type stars, especially M dwarfs, resulting in a glaring redshift gap in quasar redshift distributions. We develop a new selection technique for $z \sim$ 5.5 quasars based on optical, near-IR and mid-IR photometric data from Sloan Digital Sky Survey (SDSS), UKIRT InfraRed Deep Sky Surveys - Large Area Survey (ULAS), VISTA Hemisphere Survey (VHS) and Wide field Infrared Survey Explorer (WISE). From our pilot observations in SDSS-ULAS/VHS area, we have discovered 15 new quasars at 5.3 $\le z \le$ 5.7 and 6 new lower redshift quasars, with SDSS z band magnitude brighter than 20.5. Including other two $z \sim$ 5.5 quasars already published in our previous work, we now construct an uniform quasar sample at 5.3 $\le z \le$ 5.7 with 17 quasars in a $\sim$ 4800 square degree survey area. For further application in a larger survey area, we apply our selection pipeline to do a test selection by using the new wide field J band photometric data from a preliminary version of the UKIRT Hemisphere Survey (UHS). We successfully discover the first UHS selected $z \sim$ 5.5 quasar.

In this work, we consider complementary lattice arrays in order to enable a broader range of designs for coded aperture imaging systems. We provide a general framework and methods that generate richer and more flexible designs than existing ones. Besides this, we review and interpret the state-of-the-art uniformly redundant arrays (URA) designs, broaden the related concepts, and further propose some new design methods.

Under cosmic irradiation, the interstellar water ice mantles evolve towards a compact amorphous state. Crystalline ice amorphisation was previously monitored mainly in the keV to hundreds of keV ion energies. We experimentally investigate heavy ion irradiation amorphisation of crystalline ice, at high energies closer to true cosmic rays, and explore the water-ice sputtering yield. We irradiated thin crystalline ice films with MeV to GeV swift ion beams, produced at the GANIL accelerator. The ice infrared spectral evolution as a function of fluence is monitored with in-situ infrared spectroscopy (induced amorphisation of the initial crystalline state into a compact amorphous phase). The crystalline ice amorphisation cross-section is measured in the high electronic stopping-power range for different temperatures. At large fluence, the ice sputtering is measured on the infrared spectra, and the fitted sputtering-yield dependence, combined with previous measurements, is quadratic over three decades of electronic stopping power. The final state of cosmic ray irradiation for porous amorphous and crystalline ice, as monitored by infrared spectroscopy, is the same, but with a large difference in cross-section, hence in time scale in an astrophysical context. The cosmic ray water-ice sputtering rates compete with the UV photodesorption yields reported in the literature. The prevalence of direct cosmic ray sputtering over cosmic-ray induced photons photodesorption may be particularly true for ices strongly bonded to the ice mantles surfaces, such as hydrogen-bonded ice structures or more generally the so-called polar ices.

We aim at investigating the formation of jet-like features in the lower solar atmosphere, e.g. chromosphere and transition region, as a result of magnetic reconnection. Magnetic reconnection as occurring at chromospheric and transition regions densities and triggered by magnetic flux emergence is studied using a 2.5D MHD code. The initial atmosphere is static and isothermal, with a temperature of 20,000 K. The initial magnetic field is uniform and vertical. Two physical environments with different magnetic field strength (25 G and 50 G) are presented. In each case, two sub-cases are discussed, where the environments have different initial mass density. In the case where we have a weaker magnetic field (25 G) and higher plasma density ($N_e=2\times 10^{11}$ cm$^{-3}$), valid for the typical quiet Sun chromosphere, a plasma jet would be observed with a temperature of 2--3 $\times 10^4$ K and a velocity as high as 40 km/s. The opposite case of a medium with a lower electron density ($N_e=2\times 10^{10}$ cm$^{-3}$), i.e. more typical for the transition region, and a stronger magnetic field of 50 G, up-flows with line-of-sight velocities as high as 90 km/s and temperatures of 6 $\times$ 10$^5$ K, i.e. upper transition region -- low coronal temperatures, are produced. Only in the latter case, the low corona Fe IX 171 \AA\ shows a response in the jet which is comparable to the O V increase. The results show that magnetic reconnection can be an efficient mechanism to drive plasma outflows in the chromosphere and transition region. The model can reproduce characteristics, such as temperature and velocity for a range of jet features like a fibril, a spicule, an hot X-ray jet or a transition region jet by changing either the magnetic field strength or the electron density, i.e. where in the atmosphere the reconnection occurs.

Magnetic reconnection in the low atmosphere, e.g. chromosphere, is investigated in various physical environments. Its implications for the origination of explosive events (small--scale jets) are discussed. A 2.5-dimensional resistive magnetohydrodynamic (MHD) model in Cartesian coordinates is used. It is found that the temperature and velocity of the outflow jets as a result of magnetic reconnection are strongly dependent on the physical environments, e.g. the magnitude of the magnetic field strength and the plasma density. If the magnetic field strength is weak and the density is high, the temperature of the jets is very low (~10,000 K) as well as its velocity (~40 km/s). However, if environments with stronger magnetic field strength (20 G) and smaller density (electron density Ne=2x10^{10} cm^{-3}) are considered, the outflow jets reach higher temperatures of up to 600,000 K and a line-of-sight velocity of up to 130 km/s which is comparable with the observational values of jet-like events.

Both analytical and numerical works show that magnetic reconnection must occur in hot accretion flows. This process will effectively heat and accelerate electrons. In this paper we use the numerical hybrid simulation of magnetic reconnection plus test-electron method to investigate the electron acceleration and heating due to magnetic reconnection in hot accretion flows. We consider fiducial values of density, temperature, and magnetic parameter $\beta_e$ (defined as the ratio of the electron pressure to the magnetic pressure) of the accretion flow as $n_{0} \sim 10^{6} {\rm cm^{-3}}$, $T_{e}^0\sim 2\times 10^9 {\rm K}$, and $\beta_e=1$. We find that electrons are heated to a higher temperature $T_{e}=5\times 10^9$K, and a fraction $\eta\sim 8%$ of electrons are accelerated into a broken power-law distribution, $dN(\gamma)\propto \gamma^{-p}$, with $p\approx 1.5$ and 4 below and above $\sim 1$ MeV, respectively. We also investigate the effect of varying $\beta$ and $n_0$. We find that when $\beta_e$ is smaller or $n_0$ is larger, i.e, the magnetic field is stronger, $T_e$, $\eta$, and $p$ all become larger.

We present our investigation into the physical conditions of the gas in five intervening quasar absorption line systems along the line of sight toward the quasar PG 0117+213, with redshifts of z=0.57, z=0.72, z=1.04, z=1.32 and z=1.34. Photoionization modeling of HST, Keck I, and Palomar data, using the code Cloudy, is employed to derive densities and metallicities of the multiple phases of gas required to fit the absorption profile for each system. We discuss the implications of these models for galaxy evolution, including the interpretation of ``CIV deficiency'' and damped Lyman alpha absorbers (DLAs), and the relationships between galaxy morphology, galaxy luminosity, and absorption signature.

We present the following results of photoionization modeling of six MgII-selected absorption systems, at redshift 0.5 < z 0.9, along lines of sight toward three quasars: PG 1241+176, PG 1248+401, and PG 1317+274. These are part of a larger sample of ~20 MgII absorbers at intermediate redshift, that facilitates a survey of the properties of, and processes active in, the multiple phases of gas, both in and outside of galaxies. We present new high resolution ultraviolet spectra from HST/STIS as well as high resolution optical spectra obtained with HIRES/Keck. Together, these spectra allow simultaneous study of a variety of ionization states of different chemical elements, with resolution of the kinematics providing strong constraints on multiphase properties. The six systems presented here include several that are likely to arise from lines of sight through disk and halo structures of spiral galaxies. For these we find that the high ionization gas, traced by CIV is consistent with coronal structures that resemble that of the Milky Way, along with high velocity clouds at 100-200 km/s. Another system has relatively weak CIV, relative to the low ionization absorption, which leads to a discussion of the circumstances in which a corona might be weak or absent in a galaxy, i.e. an early-type morphology or low star formation rate. Finally, we present systems that are examples of single-cloud and multiple-cloud weak MgII absorbers, which are as a class not likely to be within ~50 kpc of luminous galaxies. Based the physical conditions inferred from models, we discuss the nature of these types of systems, which may trace outer regions of galaxies, dwarf galaxy satellites, or metal-rich regions of the intergalactic medium.

We analyze high resolution spectra of a multi--cloud weak [defined as W_r(MgII) < 0.3 A] absorbing system along the line of sight to PG 1634+706. This system gives rise to a partial Lyman limit break and absorption in MgII, SiII, CII, SiIII, SiIV, CIV, and OVI. The lower ionization transitions arise in two kinematic subsystems with a separation of ~150 km/s. Each subsystem is resolved into several narrow components, having Doppler widths of 3-10 kms. For both subsystems, the OVI absorption arises in a separate higher ionization phase, in regions dominated by bulk motions in the range of 30-40 km/s. The two OVI absorption profiles are kinematically offset by ~50 km/s with respect to each of the two lower ionization subsystem. In the stronger subsystem, the SiIII absorption is strong with a distinctive, smooth profile shape and may partially arise in shock heated gas. Moreover, the kinematic substructure of SiIV traces that of the lower ionization MgII, but may be offset by ~3 km/s. Based upon photoionization models, constrained by the partial Lyman limit break, we infer a low metallicity of ~0.03 solar for the low ionization gas in both subsystems. The broader OVI phases have a somewhat higher metallicity, and they are consistent with photoionization; the profiles are not broad enough to imply production of OVI through collisional ionization. Various models, including outer disks, dwarf galaxies, and superwinds, are discussed to account for the phase structure, metallicity, and kinematics of this absorption system. We favor an interpretation in which the two subsystems are produced by condensed clouds far out in the opposite extremes of a multi-layer dwarf galaxy superwind.

A high-resolution HST/STIS spectrum (R=30,000) is presented of the three MgII-selected absorption systems (A, B, and C, clustered within 1500km/s) at z~0.93 toward the quasar PG 1206+459. A WIYN Gunn i-band image of the quasar field and spectroscopy of two galaxy candidates are also presented. A multi-phase medium is seen in all three systems, consistent with smaller, denser clouds producing low-ionization transitions (MgII, FeII, and SiII) and larger, diffuse clouds giving rise to high-ionization transitions (CIV, NV, and/or OVI). (1) System A, a multi-cloud, weak MgII absorber at z=0.9254, requires a super-solar metallicity in both low- and high-ionization phases, unless an alpha-group enhancement is included. With the unusually complex velocity structure resolved in the NV profiles, this system is unlikely to represent a traditional galaxy disk/corona. The most likely candidate host galaxy is a ~2L^*, apparently warped, spiral at an impact parameter of 43h^-1 kpc. (2) System B, at z=0.9276, has the strongest MgII absorption and has an approximately solar metallicity in the low-ionization phase. The smooth, broad high-ionization profiles may indicate a coronal structure similar to that of the Milky Way. The redshift of an L^* galaxy (z=0.9289), at an impact parameter of 38h^-1 kpc is consistent with the redshift of this system. (3) System C, at z=0.9342, has a single component in MgII, separated from the other two systems by ~1000km/s. It lacks the small, low-ionization cloud characteristic of an isolated single-cloud, weak MgII absorber. Its absorption properties are similar to the ``satellite clouds'' of classic strong MgII absorbers, so this could be a high-velocity cloud in the galaxy group responsible for the systems, possibly related to a 0.2L^* galaxy at an impact parameter of 43h^-1 kpc.

High resolution optical (HIRES/Keck) and UV (STIS/HST) spectra, covering a large range of chemical transitions, are analyzed for three single-cloud weak MgII absorption systems along the line of sight toward the quasar PG 1634+706. Weak MgII absorption lines in quasar spectra trace metal-enriched environments that are rarely closely associated with the most luminous galaxies (>0.05L^*). The two weak MgII systems at z=0.81 and z=0.90 are constrained to have >=solar metallicity, while the metallicity of the z=0.65 system is not as well-constrained, but is consistent with >1/10th solar. These weak MgII clouds are likely to be local pockets of high metallicity in a lower metallicity environment. All three systems have two phases of gas, a higher density region that produces narrower absorption lines for low ionization transitions, such as MgII, and a lower density region that produces broader absorption lines for high ionization transitions, such as CIV. The CIV profile for one system (at z=0.81) can be fit with a single broad component (b~10 km/s), but those for the other two systems require one or two additional offset high ionization clouds. Two possible physical pictures for the phase structure are discussed: one with a low-ionization, denser phase embedded in a lower density surrounding medium, and the other with the denser clumps surrounding more highly ionized gas.

The z=0.9902 system along the quasar PG 1634+706 line of sight is a strong MgII absorber (W(2796)>0.3A) with only weak CIV absorption (it is ``CIV-deficient''). To study this system, we used high-resolution spectra from both HST/STIS (R=30,000) and Keck/HIRES (R=45,000). These spectra cover key transitions, such as MgI, MgII, FeII, SiII, CII, SiIII, CIII, SiIV, and CIV. Assuming a Haardt and Madau extragalactic background spectrum, we modeled the system with a combination of photoionization and collisional ionization. Based on a comparison of synthetic spectra to the data profiles, we infer the existence of the following four phases of gas: i) Seven MgII clouds have sizes of 1-1000pc and densities of 0.002-0.1/cm^3, with a gradual decrease in density from blue to red. The MgII phase gives rise to most of the CIV absorption and resembles the warm, ionized inter-cloud medium of the Milky Way; ii) Instead of arising in the same phase as MgII, MgI is produced in separate, narrow components with b~0.75km/s. These small MgI pockets (~100AU) could represent a denser phase (~200/cm^3) of the interstellar medium (ISM), analogous to the small-scale structure observed in the Milky Way ISM; iii) A ``broad phase'' with a Doppler parameter, b~60km/s, is required to consistently fit Ly-alpha, Ly-beta, and the higher-order Lyman-series lines. A low metallicity (log Z <= -2) for this phase could explain why the system is ``CIV-deficient'', and also why NV and OVI are not detected. This phase may be a galactic halo or it could represent a diffuse medium in an early-type galaxy; iv) The strong absorption in SiIV relative to CIV could be produced in an extra, collisionally ionized phase with a temperature of T~60,000K. The collisional phase could exist in cooling layers that are shock-heated by supernovae-related processes.

We used ultraviolet spectra from HST/STIS (R=30,000), together with optical spectra from Keck/HIRES (R=45,000), to study the three MgII-selected absorption systems at z=0.9254, 0.9276, and 0.9342 toward the quasar PG 1206+459. A multi-phase gaseous structure, with low-ionization components produced in small condensations and high-ionization ones in diffuse clouds, is indicated in all three systems. Each system is likely to represent a different galaxy with absorption due to some combination of interstellar medium, coronal gas, halo gas, and high-velocity clouds. Even with the improved sensitivity of HST/COS, we will only be able to obtain high-resolution ultraviolet spectra of the brightest quasars in the sky. A larger telescope with ultraviolet coverage will enable quasar absorption line studies of hundreds of galaxies, including a wide range of galaxy types and environments at low and intermediate redshifts.

A new and mysterious class of object has been revealed by the detection of numerous weak MgII doublets in quasar absorption line spectra. The properties of these objects will be reviewed. They are not in close proximity to luminous galaxies, yet they have metallicities close to the solar value; they are likely to be self-enriched. A significant fraction of the weak MgII absorbers are constrained to be less than 10 parsecs in size, yet they present a large cross-section for absorption, indicating that there are more than a million times more of them than there are luminous galaxies. They could be remnants of Population III star clusters or tracers of supernova remnants in a population of "failed dwarf galaxies" expected in cold dark matter structure formation scenarios.