sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Shaifullah, G.

Normalized to: Shaifullah, G.

16 article(s) in total. 191 co-authors, from 1 to 16 common article(s). Median position in authors list is 35,5.

[1]  oai:arXiv.org:2005.14366  [pdf] - 2104094
The MeerKAT Telescope as a Pulsar Facility: System verification and early science results from MeerTime
Comments: 20 pages, 16 Figures, 4 Tables, accepted for publication in PASA
Submitted: 2020-05-28
We describe system verification tests and early science results from the pulsar processor (PTUSE) developed for the newly-commissioned 64-dish SARAO MeerKAT radio telescope in South Africa. MeerKAT is a high-gain (~2.8 K/Jy) low-system temperature (~18 K at 20cm) radio array that currently operates from 580-1670 MHz and can produce tied-array beams suitable for pulsar observations. This paper presents results from the MeerTime Large Survey Project and commissioning tests with PTUSE. Highlights include observations of the double pulsar J0737-3039A, pulse profiles from 34 millisecond pulsars from a single 2.5h observation of the Globular cluster Terzan 5, the rotation measure of Ter5O, a 420-sigma giant pulse from the Large Magellanic Cloud pulsar PSR J0540-6919, and nulling identified in the slow pulsar PSR J0633-2015. One of the key design specifications for MeerKAT was absolute timing errors of less than 5 ns using their novel precise time system. Our timing of two bright millisecond pulsars confirm that MeerKAT delivers exceptional timing. PSR J2241-5236 exhibits a jitter limit of <4 ns per hour whilst timing of PSR J1909-3744 over almost 11 months yields an rms residual of 66 ns with only 4 min integrations. Our results confirm that the MeerKAT is an exceptional pulsar telescope. The array can be split into four separate sub-arrays to time over 1000 pulsars per day and the future deployment of S-band (1750-3500 MHz) receivers will further enhance its capabilities.
[2]  oai:arXiv.org:2003.10352  [pdf] - 2085176
Timing stability of black widow pulsars
Comments: Submitted to MNRAS
Submitted: 2020-03-23
We study the timing stability of three black widow pulsars, both in terms of their long-term spin evolution and their shorter-term orbital stability. The erratic timing behaviour and radio eclipses of the first two black widow pulsar systems discovered (PSRs B1957+20 and J2051$-$0827) was assumed to be representative for this class of pulsars. With several new black widow systems added to this population in the last decade, there are now several systems known that do not show these typical orbital variations or radio eclipses. We present timing solutions using 7$-$8 yrs of observations from four of the European Pulsar Timing Array telescopes for PSRs\,J0023+0923, J2214+3000 and J2234+0944, and confirm that two of these systems do not show any significant orbital variability over our observing time span, both in terms of secular or orbital parameters. The third pulsar PSR J0023+0923 shows orbital variability and we discuss the implications for the timing solution. Our results from the long-term timing of these pulsars provide several new or improved parameters compared to earlier works. We discuss our results regarding the stability of these pulsars, and the stability of the class of black widow pulsars in general, in the context of the binary parameters, and discuss the potential of the Roche-lobe filling factor of the companion star being an indicator for stability of these systems.
[3]  oai:arXiv.org:1910.13628  [pdf] - 2026196
A pulsar-based timescale from the International Pulsar Timing Array
Comments: accepted by MNRAS
Submitted: 2019-10-29
We have constructed a new timescale, TT(IPTA16), based on observations of radio pulsars presented in the first data release from the International Pulsar Timing Array (IPTA). We used two analysis techniques with independent estimates of the noise models for the pulsar observations and different algorithms for obtaining the pulsar timescale. The two analyses agree within the estimated uncertainties and both agree with TT(BIPM17), a post-corrected timescale produced by the Bureau International des Poids et Mesures (BIPM). We show that both methods could detect significant errors in TT(BIPM17) if they were present. We estimate the stability of the atomic clocks from which TT(BIPM17) is derived using observations of four rubidium fountain clocks at the US Naval Observatory. Comparing the power spectrum of TT(IPTA16) with that of these fountain clocks suggests that pulsar-based timescales are unlikely to contribute to the stability of the best timescales over the next decade, but they will remain a valuable independent check on atomic timescales. We also find that the stability of the pulsar-based timescale is likely to be limited by our knowledge of solar-system dynamics, and that errors in TT(BIPM17) will not be a limiting factor for the primary goal of the IPTA, which is to search for the signatures of nano-Hertz gravitational waves.
[4]  oai:arXiv.org:1909.04534  [pdf] - 1983956
The International Pulsar Timing Array: Second data release
Comments: Submitted to MNRAS and in review, 23 pages, 5 figures
Submitted: 2019-09-10
In this paper, we describe the International Pulsar Timing Array second data release, which includes recent pulsar timing data obtained by three regional consortia: the European Pulsar Timing Array, the North American Nanohertz Observatory for Gravitational Waves, and the Parkes Pulsar Timing Array. We analyse and where possible combine high-precision timing data for 65 millisecond pulsars which are regularly observed by these groups. A basic noise analysis, including the processes which are both correlated and uncorrelated in time, provides noise models and timing ephemerides for the pulsars. We find that the timing precisions of pulsars are generally improved compared to the previous data release, mainly due to the addition of new data in the combination. The main purpose of this work is to create the most up-to-date IPTA data release. These data are publicly available for searches for low-frequency gravitational waves and other pulsar science.
[5]  oai:arXiv.org:1905.02989  [pdf] - 1886627
On the usefulness of existing Solar-wind models for pulsar timing corrections
Comments: Accepted for publication in MNRAS. 17 pages, 13 figures
Submitted: 2019-05-08
Dispersive delays due to the Solar wind introduce excess noise in high-precision pulsar timing experiments, and must be removed in order to achieve the accuracy needed to detect, e.g., low-frequency gravitational waves. In current pulsar timing experiments, this delay is usually removed by approximating the electron density distribution in the Solar wind either as spherically symmetric, or with a two-phase model that describes the contributions from both high- and low-speed phases of the Solar wind. However, no dataset has previously been available to test the performance and limitations of these models over extended timescales and with sufficient sensitivity. Here we present the results of such a test with an optimal dataset of observations of pulsar J0034-0534, taken with the German stations of LOFAR. We conclude that the spherical approximation performs systematically better than the two-phase model at almost all angular distances, with a residual root-mean-square (rms) given by the two-phase model being up to 28% larger than the result obtained with the spherical approximation. Nevertheless, the spherical approximation remains insufficiently accurate in modelling the Solar-wind delay (especially within 20 degrees of angular distance from the Sun), as it leaves timing residuals with rms values that reach the equivalent of 0.3 microseconds at 1400 MHz. This is because a spherical model ignores the large daily variations in electron density observed in the Solar wind. In the short term, broadband observations or simultaneous observations at low frequencies are the most promising way forward to correct for Solar-wind induced delay variations.
[6]  oai:arXiv.org:1809.10744  [pdf] - 1767703
Studying the solar system with the International Pulsar Timing Array
Comments: Accepted for publication by the Monthly Notices of the Royal Astronomical Society
Submitted: 2018-09-27
Pulsar-timing analyses are sensitive to errors in the solar-system ephemerides (SSEs) that timing models utilise to estimate the location of the solar-system barycentre, the quasi-inertial reference frame to which all recorded pulse times-of-arrival are referred. Any error in the SSE will affect all pulsars, therefore pulsar timing arrays (PTAs) are a suitable tool to search for such errors and impose independent constraints on relevant physical parameters. We employ the first data release of the International Pulsar Timing Array to constrain the masses of the planet-moons systems and to search for possible unmodelled objects (UMOs) in the solar system. We employ ten SSEs from two independent research groups, derive and compare mass constraints of planetary systems, and derive the first PTA mass constraints on asteroid-belt objects. Constraints on planetary-system masses have been improved by factors of up to 20 from the previous relevant study using the same assumptions, with the mass of the Jovian system measured at 9.5479189(3)$\times10^{-4}$ $M_{\odot}$. The mass of the dwarf planet Ceres is measured at 4.7(4)$\times10^{-10}$ $M_{\odot}$. We also present the first sensitivity curves using real data that place generic limits on the masses of UMOs, which can also be used as upper limits on the mass of putative exotic objects. For example, upper limits on dark-matter clumps are comparable to published limits using independent methods. While the constraints on planetary masses derived with all employed SSEs are consistent, we note and discuss differences in the associated timing residuals and UMO sensitivity curves.
[7]  oai:arXiv.org:1804.10571  [pdf] - 1682702
Improving timing sensitivity in the microhertz frequency regime: limits from PSR J1713$+$0747 on gravitational waves produced by super-massive black-hole binaries
Comments: 12 pages, 4 figures. Accepted for publication in MNRAS
Submitted: 2018-04-27
We search for continuous gravitational waves (CGWs) produced by individual super-massive black-hole binaries (SMBHBs) in circular orbits using high-cadence timing observations of PSR J1713$+$0747. We observe this millisecond pulsar using the telescopes in the European Pulsar Timing Array (EPTA) with an average cadence of approximately 1.6 days over the period between April 2011 and July 2015, including an approximately daily average between February 2013 and April 2014. The high-cadence observations are used to improve the pulsar timing sensitivity across the GW frequency range of $0.008-5$ $\mu$Hz. We use two algorithms in the analysis, including a spectral fitting method and a Bayesian approach. For an independent comparison, we also use a previously published Bayesian algorithm. We find that the Bayesian approaches provide optimal results and the timing observations of the pulsar place a 95 per cent upper limit on the sky-averaged strain amplitude of CGWs to be $\lesssim3.5\times10^{-13}$ at a reference frequency of 1 $\mu$Hz. We also find a 95 per cent upper limit on the sky-averaged strain amplitude of low-frequency CGWs to be $\lesssim1.4\times10^{-14}$ at a reference frequency of 20~nHz.
[8]  oai:arXiv.org:1803.08822  [pdf] - 1656401
Multifrequency behaviour of the anomalous events of PSR J0922+0638
Comments: 5 pages, 3 figures, accepted for publication in MNRAS Letters
Submitted: 2018-03-23
PSR J0922+0638 (B0919+06) shows unexplained anomalous variations in the on-pulse phase, where the pulse appears to episodically move to an earlier longitude for a few tens of rotations before reverting to the usual phase for approximately several hundred to more than a thousand rotations. These events, where the pulse moves in phase by up to 5$^{\circ}$, have been previously detected in observations from $\sim$300 to 2000 MHz. We present simultaneous observations from the Effelsberg 100-m radio telescope at 1350 MHz and the Bornim (Potsdam) station of the LOw Frequency ARray at 150 MHz. Our observations present the first evidence for an absence of the anomalous phase-shifting behaviour at 150 MHz. Instead, the observed intensity at the usual pulse-phase typically decreases, often showing a pseudo-nulling feature corresponding to the times when phase shifts are observed at 1350 MHz. The presence of weak emission at the usual pulse-phase supports the theory that these shifts may result from processes similar to the 'profile-absorption' expected to operate for PSR J0814+7429 (B0809+74). A possible mechanism for this could be intrinsic variations of the emission within the pulsar's beam combined with absorption by expanding shells of electrons in the line of sight.
[9]  oai:arXiv.org:1802.09206  [pdf] - 1779499
Tests of Gravitational Symmetries with Pulsar Binary J1713+0747
Comments: 11 pages, 6 figures, and 1 table; submitted to MNRAS
Submitted: 2018-02-26
Symmetries play an important role in modern theories of gravity. The strong equivalence principle (SEP) constitutes a collection of gravitational symmetries which are all implemented by general relativity. Alternative theories, however, are generally expected to violate some aspects of SEP. We test three aspects of SEP using observed change rates in the orbital period and eccentricity of binary pulsar J1713+0747: 1. the gravitational constant's constancy as part of locational invariance of gravitation; 2. the post-Newtonian parameter $\hat{\alpha}_3$ in gravitational Lorentz invariance; 3. the universality of free fall (UFF) for strongly self-gravitating bodies. Based on the pulsar timing result of the combined dataset from the North American Nanohertz Gravitational Observatory (NANOGrav) and the European Pulsar Timing Array (EPTA), we find $\dot{G}/G = (-0.1 \pm 0.9) \times 10^{-12}\,{\rm yr}^{-1}$, which is weaker than Solar system limits, but applies for strongly self-gravitating objects. Furthermore, we obtain the constraints $|\Delta|< 0.002$ for the UFF test and $-3\times10^{-20} < \hat{\alpha}_3 < 4\times10^{-20}$ at 95% confidence. These are the first direct UFF and $\hat{\alpha}_3$ tests based on pulsar binaries, and they overcome various limitations of previous tests.
[10]  oai:arXiv.org:1607.04167  [pdf] - 1457489
21-year timing of the black-widow pulsar J2051-0827
Comments: Accepted for publication by MNRAS, 10 pages, 6 figures
Submitted: 2016-07-14
Timing results for the black-widow pulsar J2051-0827 are presented, using a 21-year dataset from four European Pulsar Timing Array telescopes and the Parkes radio telescope. This dataset, which is the longest published to date for a black-widow system, allows for an improved analysis that addresses previously unknown biases. While secular variations, as identified in previous analyses, are recovered, short-term variations are detected for the first time. Concurrently, a significant decrease of approx. 2.5x10-3 cm-3 pc in the dispersion measure associated with PSR J2051-0827 is measured for the first time and improvements are also made to estimates of the proper motion. Finally, PSR J2051-0827 is shown to have entered a relatively stable state suggesting the possibility of its eventual inclusion in pulsar timing arrays.
[11]  oai:arXiv.org:1606.04098  [pdf] - 1444078
A glitch in the millisecond pulsar J0613-0200
Comments: accepted for publication in MNRAS
Submitted: 2016-06-13, last modified: 2016-06-15
We present evidence for a small glitch in the spin evolution of the millisecond pulsar J0613$-$0200, using the EPTA Data Release 1.0, combined with Jodrell Bank analogue filterbank TOAs recorded with the Lovell telescope and Effelsberg Pulsar Observing System TOAs. A spin frequency step of 0.82(3) nHz and frequency derivative step of ${-1.6(39) \times 10^{-19}\,\text{Hz} \ \text{s}^{-1}}$ are measured at the epoch of MJD 50888(30). After PSR B1821$-$24A, this is only the second glitch ever observed in a millisecond pulsar, with a fractional size in frequency of ${\Delta \nu/\nu=2.5(1) \times 10^{-12}}$, which is several times smaller than the previous smallest glitch. PSR J0613$-$0200 is used in gravitational wave searches with pulsar timing arrays, and is to date only the second such pulsar to have experienced a glitch in a combined 886 pulsar-years of observations. We find that accurately modelling the glitch does not impact the timing precision for pulsar timing array applications. We estimate that for the current set of millisecond pulsars included in the International Pulsar Timing Array, there is a probability of $\sim 50$% that another glitch will be observed in a timing array pulsar within 10 years.
[12]  oai:arXiv.org:1604.00129  [pdf] - 1443868
A millisecond pulsar in an extremely wide binary system
Comments: 16 pages, 12 figures, 2 tables, submitted for publication in MNRAS
Submitted: 2016-04-01
We report on 22 yrs of radio timing observations of the millisecond pulsar J1024$-$0719 by the telescopes participating in the European Pulsar Timing Array (EPTA). These observations reveal a significant second derivative of the pulsar spin frequency and confirm the discrepancy between the parallax and Shklovskii distances that has been reported earlier. We also present optical astrometry, photometry and spectroscopy of 2MASS J10243869$-$0719190. We find that it is a low-metallicity main-sequence star (K7V spectral type, $\mathrm{[M/H]}=-1.0$, $T_\mathrm{eff}=4050\pm50$ K) and that its position, proper motion and distance are consistent with those of PSR J1024$-$0719. We conclude that PSR J1024$-$0719 and 2MASS J10243869$-$0719190 form a common proper motion pair and are gravitationally bound. The gravitational interaction between the main-sequence star and the pulsar accounts for the spin frequency derivatives, which in turn resolves the distance discrepancy. Our observations suggest that the pulsar and main-sequence star are in an extremely wide ($P_\mathrm{b}>200$ yr) orbit. Combining the radial velocity of the companion and proper motion of the pulsar, we find that the binary system has a high spatial velocity of $384\pm45$ km s$^{-1}$ with respect to the local standard of rest and has a Galactic orbit consistent with halo objects. Since the observed main-sequence companion star cannot have recycled the pulsar to millisecond spin periods, an exotic formation scenario is required. We demonstrate that this extremely wide-orbit binary could have evolved from a triple system that underwent an asymmetric supernova explosion, though find that significant fine-tuning during the explosion is required. Finally, we discuss the implications of the long period orbit on the timing stability of PSR J1024$-$0719 in light of its inclusion in pulsar timing arrays.
[13]  oai:arXiv.org:1602.08511  [pdf] - 1378982
High-precision timing of 42 millisecond pulsars with the European Pulsar Timing Array
Comments: 42 pages, 11 figures. Accepted for publication in MNRAS
Submitted: 2016-02-26
We report on the high-precision timing of 42 radio millisecond pulsars (MSPs) observed by the European Pulsar Timing Array (EPTA). This EPTA Data Release 1.0 extends up to mid-2014 and baselines range from 7-18 years. It forms the basis for the stochastic gravitational-wave background, anisotropic background, and continuous-wave limits recently presented by the EPTA elsewhere. The Bayesian timing analysis performed with TempoNest yields the detection of several new parameters: seven parallaxes, nine proper motions and, in the case of six binary pulsars, an apparent change of the semi-major axis. We find the NE2001 Galactic electron density model to be a better match to our parallax distances (after correction from the Lutz-Kelker bias) than the M2 and M3 models by Schnitzeler (2012). However, we measure an average uncertainty of 80\% (fractional) for NE2001, three times larger than what is typically assumed in the literature. We revisit the transverse velocity distribution for a set of 19 isolated and 57 binary MSPs and find no statistical difference between these two populations. We detect Shapiro delay in the timing residuals of PSRs J1600$-$3053 and J1918$-$0642, implying pulsar and companion masses $m_p=1.22_{-0.35}^{+0.5} \text{M}_{\odot}$, $m_c = 0.21_{-0.04}^{+0.06} \text{M}_{\odot }$ and $m_p=1.25_{-0.4}^{+0.6} \text{M}_{\odot}$, $m_c = 0.23_{-0.05}^{+0.07} \text{M}_{\odot }$, respectively. Finally, we use the measurement of the orbital period derivative to set a stringent constraint on the distance to PSRs J1012$+$5307 and J1909$-$3744, and set limits on the longitude of ascending node through the search of the annual-orbital parallax for PSRs J1600$-$3053 and J1909$-$3744.
[14]  oai:arXiv.org:1602.05570  [pdf] - 1370407
From Spin Noise to Systematics: Stochastic Processes in the First International Pulsar Timing Array Data Release
Comments: 29 pages. 16 figures. Accepted for publication in MNRAS
Submitted: 2016-02-16
We analyse the stochastic properties of the 49 pulsars that comprise the first International Pulsar Timing Array (IPTA) data release. We use Bayesian methodology, performing model selection to determine the optimal description of the stochastic signals present in each pulsar. In addition to spin-noise and dispersion-measure (DM) variations, these models can include timing noise unique to a single observing system, or frequency band. We show the improved radio-frequency coverage and presence of overlapping data from different observing systems in the IPTA data set enables us to separate both system and band-dependent effects with much greater efficacy than in the individual PTA data sets. For example, we show that PSR J1643$-$1224 has, in addition to DM variations, significant band-dependent noise that is coherent between PTAs which we interpret as coming from time-variable scattering or refraction in the ionised interstellar medium. Failing to model these different contributions appropriately can dramatically alter the astrophysical interpretation of the stochastic signals observed in the residuals. In some cases, the spectral exponent of the spin noise signal can vary from 1.6 to 4 depending upon the model, which has direct implications for the long-term sensitivity of the pulsar to a stochastic gravitational-wave (GW) background. By using a more appropriate model, however, we can greatly improve a pulsar's sensitivity to GWs. For example, including system and band-dependent signals in the PSR J0437$-$4715 data set improves the upper limit on a fiducial GW background by $\sim 60\%$ compared to a model that includes DM variations and spin-noise only.
[15]  oai:arXiv.org:1602.03640  [pdf] - 1362729
The International Pulsar Timing Array: First Data Release
Comments: 25 pages, 6 tables, 5 figures. Accepted for publication in MNRAS
Submitted: 2016-02-11
The highly stable spin of neutron stars can be exploited for a variety of (astro-)physical investigations. In particular arrays of pulsars with rotational periods of the order of milliseconds can be used to detect correlated signals such as those caused by gravitational waves. Three such "Pulsar Timing Arrays" (PTAs) have been set up around the world over the past decades and collectively form the "International" PTA (IPTA). In this paper, we describe the first joint analysis of the data from the three regional PTAs, i.e. of the first IPTA data set. We describe the available PTA data, the approach presently followed for its combination and suggest improvements for future PTA research. Particular attention is paid to subtle details (such as underestimation of measurement uncertainty and long-period noise) that have often been ignored but which become important in this unprecedentedly large and inhomogeneous data set. We identify and describe in detail several factors that complicate IPTA research and provide recommendations for future pulsar timing efforts. The first IPTA data release presented here (and available online) is used to demonstrate the IPTA's potential of improving upon gravitational-wave limits placed by individual PTAs by a factor of ~2 and provides a 2-sigma limit on the dimensionless amplitude of a stochastic GWB of 1.7x10^{-15} at a frequency of 1 yr^{-1}. This is 1.7 times less constraining than the limit placed by (Shannon et al. 2015), due mostly to the more recent, high-quality data they used.
[16]  oai:arXiv.org:1510.09194  [pdf] - 1378673
The noise properties of 42 millisecond pulsars from the European Pulsar Timing Array and their impact on gravitational wave searches
Comments: Accepted for publication by the Monthly Notices of the Royal Astronomical Society
Submitted: 2015-10-30, last modified: 2016-01-19
The sensitivity of Pulsar Timing Arrays to gravitational waves depends on the noise present in the individual pulsar timing data. Noise may be either intrinsic or extrinsic to the pulsar. Intrinsic sources of noise will include rotational instabilities, for example. Extrinsic sources of noise include contributions from physical processes which are not sufficiently well modelled, for example, dispersion and scattering effects, analysis errors and instrumental instabilities. We present the results from a noise analysis for 42 millisecond pulsars (MSPs) observed with the European Pulsar Timing Array. For characterising the low-frequency, stochastic and achromatic noise component, or "timing noise", we employ two methods, based on Bayesian and frequentist statistics. For 25 MSPs, we achieve statistically significant measurements of their timing noise parameters and find that the two methods give consistent results. For the remaining 17 MSPs, we place upper limits on the timing noise amplitude at the 95% confidence level. We additionally place an upper limit on the contribution to the pulsar noise budget from errors in the reference terrestrial time standards (below 1%), and we find evidence for a noise component which is present only in the data of one of the four used telescopes. Finally, we estimate that the timing noise of individual pulsars reduces the sensitivity of this data set to an isotropic, stochastic GW background by a factor of >9.1 and by a factor of >2.3 for continuous GWs from resolvable, inspiralling supermassive black-hole binaries with circular orbits.