sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Seader, Shawn E.

Normalized to: Seader, S.

40 article(s) in total. 249 co-authors, from 1 to 32 common article(s). Median position in authors list is 16,5.

[1]  oai:arXiv.org:1812.00103  [pdf] - 1818796
Kepler Data Validation II -- Transit Model Fitting and Multiple-Planet Search
Comments: 52 pages, 24 figures
Submitted: 2018-11-30
This paper discusses the transit model fitting and multiple-planet search algorithms and performance of the Kepler Science Data Processing Pipeline, developed by the Kepler Science Operations Center (SOC). Threshold Crossing Events (TCEs), which are transit candidate events, are generated by the Transiting Planet Search (TPS) component of the pipeline and subsequently processed in the Data Validation (DV) component. The transit model is used in DV to fit TCEs in order to characterize planetary candidates and to derive parameters that are used in various diagnostic tests to classify them. After the signature associated with the TCE is removed from the light curve of the target star, the residual light curve goes through TPS again to search for additional TCEs. The iterative process of transit model fitting and multiple-planet search continues until no TCE is generated from the residual light curve or an upper limit is reached. The transit model fitting and multiple-planet search performance of the final release (9.3, January 2016) of the pipeline is demonstrated with the results of the processing of 4 years (17 quarters) of flight data from the primary Kepler Mission. The transit model fitting results are accessible from the NASA Exoplanet Archive. The final version of the SOC codebase is available through GitHub.
[2]  oai:arXiv.org:1803.04526  [pdf] - 1674933
Kepler Data Validation I -- Architecture, Diagnostic Tests, and Data Products for Vetting Transiting Planet Candidates
Comments: 84 pages, 26 figures, 2 tables. Accepted for publication in PASP on 9 March 2018. Published in PASP on 24 April 2018
Submitted: 2018-03-12, last modified: 2018-04-24
The Kepler Mission was designed to identify and characterize transiting planets in the Kepler Field of View and to determine their occurrence rates. Emphasis was placed on identification of Earth-size planets orbiting in the Habitable Zone of their host stars. Science data were acquired for a period of four years. Long-cadence data with 29.4 min sampling were obtained for ~200,000 individual stellar targets in at least one observing quarter in the primary Kepler Mission. Light curves for target stars are extracted in the Kepler Science Data Processing Pipeline, and are searched for transiting planet signatures. A Threshold Crossing Event is generated in the transit search for targets where the transit detection threshold is exceeded and transit consistency checks are satisfied. These targets are subjected to further scrutiny in the Data Validation (DV) component of the Pipeline. Transiting planet candidates are characterized in DV, and light curves are searched for additional planets after transit signatures are modeled and removed. A suite of diagnostic tests is performed on all candidates to aid in discrimination between genuine transiting planets and instrumental or astrophysical false positives. Data products are generated per target and planet candidate to document and display transiting planet model fit and diagnostic test results. These products are exported to the Exoplanet Archive at the NASA Exoplanet Science Institute, and are available to the community. We describe the DV architecture and diagnostic tests, and provide a brief overview of the data products. Transiting planet modeling and the search for multiple planets on individual targets are described in a companion paper. The final revision of the Kepler Pipeline code base is available to the general public through GitHub. The Kepler Pipeline has also been modified to support the TESS Mission which will commence in 2018.
[3]  oai:arXiv.org:1710.06758  [pdf] - 1670495
Planetary Candidates Observed by Kepler. VIII. A Fully Automated Catalog With Measured Completeness and Reliability Based on Data Release 25
Comments: 61 pages, 23 Figures, 9 Tables, Accepted to The Astrophysical Journal Supplement Series
Submitted: 2017-10-18, last modified: 2018-03-04
We present the Kepler Object of Interest (KOI) catalog of transiting exoplanets based on searching four years of Kepler time series photometry (Data Release 25, Q1-Q17). The catalog contains 8054 KOIs of which 4034 are planet candidates with periods between 0.25 and 632 days. Of these candidates, 219 are new and include two in multi-planet systems (KOI-82.06 and KOI-2926.05), and ten high-reliability, terrestrial-size, habitable zone candidates. This catalog was created using a tool called the Robovetter which automatically vets the DR25 Threshold Crossing Events (TCEs, Twicken et al. 2016). The Robovetter also vetted simulated data sets and measured how well it was able to separate TCEs caused by noise from those caused by low signal-to-noise transits. We discusses the Robovetter and the metrics it uses to sort TCEs. For orbital periods less than 100 days the Robovetter completeness (the fraction of simulated transits that are determined to be planet candidates) across all observed stars is greater than 85%. For the same period range, the catalog reliability (the fraction of candidates that are not due to instrumental or stellar noise) is greater than 98%. However, for low signal-to-noise candidates between 200 and 500 days around FGK dwarf stars, the Robovetter is 76.7% complete and the catalog is 50.5% reliable. The KOI catalog, the transit fits and all of the simulated data used to characterize this catalog are available at the NASA Exoplanet Archive.
[4]  oai:arXiv.org:1604.06140  [pdf] - 1515721
Detection of Potential Transit Signals in 17 Quarters of Kepler Data: Results of the Final Kepler Mission Transiting Planet Search (DR25)
Comments: 60 pages, 20 figures, 3 tables. Submitted to AAS Journals on 4/19/16. Resubmitted following referee report on 6/23/16. Accepted for publication in AJ on 6/30/16. Published in AJ on 11/11/16
Submitted: 2016-04-20, last modified: 2016-11-16
We present results of the final Kepler Data Processing Pipeline search for transiting planet signals in the full 17-quarter primary mission data set. The search includes a total of 198,709 stellar targets, of which 112,046 were observed in all 17 quarters and 86,663 in fewer than 17 quarters. We report on 17,230 targets for which at least one transit signature is identified that meets the specified detection criteria: periodicity, minimum of three observed transit events, detection statistic (i.e., signal-to-noise ratio) in excess of the search threshold, and passing grade on three statistical transit consistency tests. Light curves for which a transit signal is identified are iteratively searched for additional signatures after a limb-darkened transiting planet model is fitted to the data and transit events are removed. The search for additional planets adds 16,802 transit signals for a total of 34,032; this far exceeds the number of transit signatures identified in prior pipeline runs. There was a strategic emphasis on completeness over reliability for the final Kepler transit search. A comparison of the transit signals against a set of 3402 well-established, high-quality Kepler Objects of Interest yields a recovery rate of 99.8%. The high recovery rate must be weighed against a large number of false-alarm detections. We examine characteristics of the planet population implied by the transiting planet model fits with an emphasis on detections that would represent small planets orbiting in the habitable zone of their host stars.
[5]  oai:arXiv.org:1512.06149  [pdf] - 1415034
Planetary Candidates Observed by Kepler. VII. The First Fully Uniform Catalog Based on The Entire 48 Month Dataset (Q1-Q17 DR24)
Comments: Accepted to the Astrophysical Journal Supplement Series. 30 pages, 9 figures, 7 tables. We make the DR24 robovetter decision code publicly available at http://github.com/JeffLCoughlin/robovetter, with input and output examples provided using the same data as contained in the full paper's tables
Submitted: 2015-12-18, last modified: 2016-02-18
We present the seventh Kepler planet candidate catalog, which is the first to be based on the entire, uniformly processed, 48 month Kepler dataset. This is the first fully automated catalog, employing robotic vetting procedures to uniformly evaluate every periodic signal detected by the Q1-Q17 Data Release 24 (DR24) Kepler pipeline. While we prioritize uniform vetting over the absolute correctness of individual objects, we find that our robotic vetting is overall comparable to, and in most cases is superior to, the human vetting procedures employed by past catalogs. This catalog is the first to utilize artificial transit injection to evaluate the performance of our vetting procedures and quantify potential biases, which are essential for accurate computation of planetary occurrence rates. With respect to the cumulative Kepler Object of Interest (KOI) catalog, we designate 1,478 new KOIs, of which 402 are dispositioned as planet candidates (PCs). Also, 237 KOIs dispositioned as false positives (FPs) in previous Kepler catalogs have their disposition changed to PC and 118 PCs have their disposition changed to FP. This brings the total number of known KOIs to 8,826 and PCs to 4,696. We compare the Q1-Q17 DR24 KOI catalog to previous KOI catalogs, as well as ancillary Kepler catalogs, finding good agreement between them. We highlight new PCs that are both potentially rocky and potentially in the habitable zone of their host stars, many of which orbit solar-type stars. This work represents significant progress in accurately determining the fraction of Earth-size planets in the habitable zone of Sun-like stars. The full catalog is publicly available at the NASA Exoplanet Archive.
[6]  oai:arXiv.org:1507.06723  [pdf] - 1250939
Discovery and Validation of Kepler-452b: A 1.6-Re Super Earth Exoplanet in the Habitable Zone of a G2 Star
Comments: 19 pages, 16 figures
Submitted: 2015-07-23
We report on the discovery and validation of Kepler-452b, a transiting planet identified by a search through the 4 years of data collected by NASA's Kepler Mission. This possibly rocky 1.63$^{+0.23}_{-0.20}$ R$_\oplus$ planet orbits its G2 host star every 384.843$^{+0.007}_{0.012}$ days, the longest orbital period for a small (R$_p$ < 2 R$_\oplus$) transiting exoplanet to date. The likelihood that this planet has a rocky composition lies between 49% and 62%. The star has an effective temperature of 5757$\pm$85 K and a log g of 4.32$\pm$0.09. At a mean orbital separation of 1.046$^{+0.019}_{-0.015}$ AU, this small planet is well within the optimistic habitable zone of its star (recent Venus/early Mars), experiencing only 10% more flux than Earth receives from the Sun today, and slightly outside the conservative habitable zone (runaway greenhouse/maximum greenhouse). The star is slightly larger and older than the Sun, with a present radius of 1.11$^{+0.15}_{-0.09}$ R$_\odot$ and an estimated age of 6 Gyr. Thus, Kepler-452b has likely always been in the habitable zone and should remain there for another 3 Gyr.
[7]  oai:arXiv.org:1507.05097  [pdf] - 1277107
Measuring Transit Signal Recovery in the Kepler Pipeline II: Detection Efficiency as Calculated in One Year of Data
Comments: 13 pages, 7 figures, 1 electronic table, accepted by ApJ
Submitted: 2015-07-17
The Kepler planet sample can only be used to reconstruct the underlying planet occurrence rate if the detection efficiency of the Kepler pipeline is known, here we present the results of a second experiment aimed at characterising this detection efficiency. We inject simulated transiting planet signals into the pixel data of ~10,000 targets, spanning one year of observations, and process the pixels as normal. We compare the set of detections made by the pipeline with the expectation from the set of simulated planets, and construct a sensitivity curve of signal recovery as a function of the signal-to-noise of the simulated transit signal train. The sensitivity curve does not meet the hypothetical maximum detection efficiency, however it is not as pessimistic as some of the published estimates of the detection efficiency. For the FGK stars in our sample, the sensitivity curve is well fit by a gamma function with the coefficients a = 4.35 and b = 1.05. We also find that the pipeline algorithms recover the depths and periods of the injected signals with very high fidelity, especially for periods longer than 10 days. We perform a simplified occurrence rate calculation using the measured detection efficiency compared to previous assumptions of the detection efficiency found in the literature to demonstrate the systematic error introduced into the resulting occurrence rates. The discrepancies in the calculated occurrence rates may go some way towards reconciling some of the inconsistencies found in the literature.
[8]  oai:arXiv.org:1506.04175  [pdf] - 1264048
Terrestrial Planet Occurrence Rates for the Kepler GK Dwarf Sample
Comments: 19 Pages, 17 Figures, Submitted ApJ. Python source to support Kepler pipeline completeness estimates available at http://github.com/christopherburke/KeplerPORTs/
Submitted: 2015-06-12
We measure planet occurrence rates using the planet candidates discovered by the Q1-Q16 Kepler pipeline search. This study examines planet occurrence rates for the Kepler GK dwarf target sample for planet radii, 0.75<Rp<2.5 Rearth, and orbital periods, 50<Porb<300 days, with an emphasis on a thorough exploration and identification of the most important sources of systematic uncertainties. Integrating over this parameter space, we measure an occurrence rate of F=0.77 planets per star, with an allowed range of 0.3<F<1.9. The allowed range takes into account both statistical and systematic uncertainties, and values of F beyond the allowed range are significantly in disagreement with our analysis. We generally find higher planet occurrence rates and a steeper increase in planet occurrence rates towards small planets than previous studies of the Kepler GK dwarf sample. Through extrapolation, we find that the one year orbital period terrestrial planet occurrence rate, zeta_1=0.1, with an allowed range of 0.01<zeta_1<2, where zeta_1 is defined as the number of planets per star within 20% of the Rp and Porb of Earth. For G dwarf hosts, the zeta_1 parameter space is a subset of the larger eta_earth parameter space, thus zeta_1 places a lower limit on eta_earth for G dwarf hosts. From our analysis, we identify the leading sources of systematics impacting Kepler occurrence rate determinations as: reliability of the planet candidate sample, planet radii, pipeline completeness, and stellar parameters.
[9]  oai:arXiv.org:1408.1496  [pdf] - 1125687
Automatic Classification of Kepler Planetary Transit Candidates
Comments: 14 pages, 10 figures
Submitted: 2014-08-07, last modified: 2015-06-04
In the first three years of operation the Kepler mission found 3,697 planet candidates from a set of 18,406 transit-like features detected on over 200,000 distinct stars. Vetting candidate signals manually by inspecting light curves and other diagnostic information is a labor intensive effort. Additionally, this classification methodology does not yield any information about the quality of planet candidates; all candidates are as credible as any other candidate. The torrent of exoplanet discoveries will continue after Kepler as there will be a number of exoplanet surveys that have an even broader search area. This paper presents the application of machine-learning techniques to the classification of exoplanet transit-like signals present in the \Kepler light curve data. Transit-like detections are transformed into a uniform set of real-numbered attributes, the most important of which are described in this paper. Each of the known transit-like detections is assigned a class of planet candidate; astrophysical false positive; or systematic, instrumental noise. We use a random forest algorithm to learn the mapping from attributes to classes on this training set. The random forest algorithm has been used previously to classify variable stars; this is the first time it has been used for exoplanet classification. We are able to achieve an overall error rate of 5.85% and an error rate for classifying exoplanets candidates of 2.81%.
[10]  oai:arXiv.org:1501.03586  [pdf] - 970935
Detection of Potential Transit Signals in 17 Quarters of Kepler Mission Data
Comments:
Submitted: 2015-01-15, last modified: 2015-02-13
We present the results of a search for potential transit signals in the full 17-quarter data set collected during Kepler's primary mission that ended on May 11, 2013, due to the on-board failure of a second reaction wheel needed to maintain high precision, fixed, pointing. The search includes a total of 198,646 targets, of which 112,001 were observed in every quarter and 86,645 were observed in a subset of the 17 quarters. We find a total of 12,669 targets that contain at least one signal that meets our detection criteria: periodicity of the signal, a minimum of three transit events, an acceptable signal-to-noise ratio, and four consistency tests that suppress false positives. Each target containing at least one transit-like pulse sequence is searched repeatedly for other signals that meet the detection criteria, indicating a multiple planet system. This multiple planet search adds an additional 7,698 transit-like signatures for a total of 20,367. Comparison of this set of detected signals with a set of known and vetted transiting planet signatures in the Kepler field of view shows that the recovery rate of the search is 90.3%. We review ensemble properties of the detected signals and present various metrics useful in validating these potential planetary signals. We highlight previously undetected planetary candidates, including several small potential planets in the habitable zone of their host stars.
[11]  oai:arXiv.org:1502.02038  [pdf] - 1224352
Planetary Candidates Observed by Kepler VI: Planet Sample from Q1-Q16 (47 Months)
Comments: 18 pages, to be published in the Astrophysical Journal Supplement Series
Submitted: 2015-02-06
\We present the sixth catalog of Kepler candidate planets based on nearly 4 years of high precision photometry. This catalog builds on the legacy of previous catalogs released by the Kepler project and includes 1493 new Kepler Objects of Interest (KOIs) of which 554 are planet candidates, and 131 of these candidates have best fit radii <1.5 R_earth. This brings the total number of KOIs and planet candidates to 7305 and 4173 respectively. We suspect that many of these new candidates at the low signal-to-noise limit may be false alarms created by instrumental noise, and discuss our efforts to identify such objects. We re-evaluate all previously published KOIs with orbital periods of >50 days to provide a consistently vetted sample that can be used to improve planet occurrence rate calculations. We discuss the performance of our planet detection algorithms, and the consistency of our vetting products. The full catalog is publicly available at the NASA Exoplanet Archive.
[12]  oai:arXiv.org:1501.07286  [pdf] - 1224231
Planetary Candidates Observed by Kepler V: Planet Sample from Q1-Q12 (36 Months)
Comments: Accepted for publication, ApJS
Submitted: 2015-01-28, last modified: 2015-01-29
The Kepler mission discovered 2842 exoplanet candidates with 2 years of data. We provide updates to the Kepler planet candidate sample based upon 3 years (Q1-Q12) of data. Through a series of tests to exclude false-positives, primarily caused by eclipsing binary stars and instrumental systematics, 855 additional planetary candidates have been discovered, bringing the total number known to 3697. We provide revised transit parameters and accompanying posterior distributions based on a Markov Chain Monte Carlo algorithm for the cumulative catalogue of Kepler Objects of Interest. There are now 130 candidates in the cumulative catalogue that receive less than twice the flux the Earth receives and more than 1100 have a radius less than 1.5 Rearth. There are now a dozen candidates meeting both criteria, roughly doubling the number of candidate Earth analogs. A majority of planetary candidates have a high probability of being bonafide planets, however, there are populations of likely false-positives. We discuss and suggest additional cuts that can be easily applied to the catalogue to produce a set of planetary candidates with good fidelity. The full catalogue is publicly available at the NASA Exoplanet Archive.
[13]  oai:arXiv.org:1311.0248  [pdf] - 1180422
Detection of Potential Transit Signals in Sixteen Quarters of Kepler Mission Data
Comments: Accepted by ApJ Supplement
Submitted: 2013-11-01, last modified: 2014-01-07
We present the results of a search for potential transit signals in four years of photometry data acquired by the Kepler Mission. The targets of the search include 111,800 stars which were observed for the entire interval and 85,522 stars which were observed for a subset of the interval. We found that 9,743 targets contained at least one signal consistent with the signature of a transiting or eclipsing object, where the criteria for detection are periodicity of the detected transits, adequate signal-to-noise ratio, and acceptance by a number of tests which reject false positive detections. When targets that had produced a signal were searched repeatedly, an additional 6,542 signals were detected on 3,223 target stars, for a total of 16,285 potential detections. Comparison of the set of detected signals with a set of known and vetted transit events in the Kepler field of view shows that the recovery rate for these signals is 96.9%. The ensemble properties of the detected signals are reviewed.
[14]  oai:arXiv.org:1312.5358  [pdf] - 1202361
Planetary Candidates Observed by Kepler IV: Planet Sample From Q1-Q8 (22 Months)
Comments: 12 pages, 8 figures, Accepted ApJ Supplement
Submitted: 2013-12-18
We provide updates to the Kepler planet candidate sample based upon nearly two years of high-precision photometry (i.e., Q1-Q8). From an initial list of nearly 13,400 Threshold Crossing Events (TCEs), 480 new host stars are identified from their flux time series as consistent with hosting transiting planets. Potential transit signals are subjected to further analysis using the pixel-level data, which allows background eclipsing binaries to be identified through small image position shifts during transit. We also re-evaluate Kepler Objects of Interest (KOI) 1-1609, which were identified early in the mission, using substantially more data to test for background false positives and to find additional multiple systems. Combining the new and previous KOI samples, we provide updated parameters for 2,738 Kepler planet candidates distributed across 2,017 host stars. From the combined Kepler planet candidates, 472 are new from the Q1-Q8 data examined in this study. The new Kepler planet candidates represent ~40% of the sample with Rp~1 Rearth and represent ~40% of the low equilibrium temperature (Teq<300 K) sample. We review the known biases in the current sample of Kepler planet candidates relevant to evaluating planet population statistics with the current Kepler planet candidate sample.
[15]  oai:arXiv.org:1312.4907  [pdf] - 1202313
Measurement of acoustic glitches in solar-type stars from oscillation frequencies observed by Kepler
Comments: Accepted for publication in ApJ
Submitted: 2013-12-17
For the very best and brightest asteroseismic solar-type targets observed by Kepler, the frequency precision is sufficient to determine the acoustic depths of the surface convective layer and the helium ionization zone. Such sharp features inside the acoustic cavity of the star, which we call acoustic glitches, create small oscillatory deviations from the uniform spacing of frequencies in a sequence of oscillation modes with the same spherical harmonic degree. We use these oscillatory signals to determine the acoustic locations of such features in 19 solar-type stars observed by the Kepler mission. Four independent groups of researchers utilized the oscillation frequencies themselves, the second differences of the frequencies and the ratio of the small and large separation to locate the base of the convection zone and the second helium ionization zone. Despite the significantly different methods of analysis, good agreement was found between the results of these four groups, barring a few cases. These results also agree reasonably well with the locations of these layers in representative models of the stars. These results firmly establish the presence of the oscillatory signals in the asteroseismic data and the viability of several techniques to determine the location of acoustic glitches inside stars.
[16]  oai:arXiv.org:1304.7387  [pdf] - 657404
Kepler-62: A five-planet system with planets of 1.4 and 1.6 Earth radii in the Habitable Zone
Comments: Published online 18 April 2013 in Science Express
Submitted: 2013-04-27
We present the detection of five planets -- Kepler-62b, c, d, e, and f -- of size 1.31, 0.54, 1.95, 1.61 and 1.41 Earth radii, orbiting a K2V star at periods of 5.7, 12.4, 18.2, 122.4 and 267.3 days, respectively. The outermost planets (Kepler-62e & -62f) are super-Earth-size (1.25 < planet radius/earth radius < 2.0) planets in the habitable zone (HZ) of their host star, receiving 1.2 +- 0.2 and 0.41 +- 0.05 times the solar flux at Earth's orbit. Theoretical models of Kepler-62e and -62f for a stellar age of ~7 Gyr suggest that both planets could be solid: either with a rocky composition or composed of mostly solid water in their bulk.
[17]  oai:arXiv.org:1304.4941  [pdf] - 1166054
A super-Earth-sized planet orbiting in or near the habitable zone around Sun-like star
Comments: Accepted for publication in the Astrophysical Journal
Submitted: 2013-04-17
We present the discovery of a super-earth-sized planet in or near the habitable zone of a sun-like star. The host is Kepler-69, a 13.7 mag G4V-type star. We detect two periodic sets of transit signals in the three-year flux time series of Kepler-69, obtained with the Kepler spacecraft. Using the very high precision Kepler photometry, and follow-up observations, our confidence that these signals represent planetary transits is >99.1%. The inner planet, Kepler-69b, has a radius of 2.24+/-0.4 Rearth and orbits the host star every 13.7 days. The outer planet, Kepler-69c, is a super-Earth-size object with a radius of 1.7+/-0.3 Rearth and an orbital period of 242.5 days. Assuming an Earth-like Bond albedo, Kepler-69c has an equilibrium temperature of 299 +/- 19 K, which places the planet close to the habitable zone around the host star. This is the smallest planet found by Kepler to be orbiting in or near habitable zone of a Sun-like star and represents an important step on the path to finding the first true Earth analog.
[18]  oai:arXiv.org:1212.2915  [pdf] - 650488
Detection of Potential Transit Signals in the First Twelve Quarters of Kepler Mission Data
Comments: 29 pages, 14 figures, accepted for publication in ApJ Supp
Submitted: 2012-12-12, last modified: 2013-04-09
We present the results of a search for potential transit signals in the first three years of photometry data acquired by the Kepler Mission. The targets of the search include 112,321 targets which were observed over the full interval and an additional 79,992 targets which were observed for a subset of the full interval. From this set of targets we find a total of 11,087 targets which contain at least one signal which meets the Kepler detection criteria: those criteria are periodicity of the signal, an acceptable signal-to-noise ratio, and three tests which reject false positives. Each target containing at least one detected signal is then searched repeatedly for additional signals, which represent multi-planet systems of transiting planets. When targets with multiple detections are considered, a total of 18,406 potential transiting planet signals are found in the Kepler Mission dataset. The detected signals are dominated by events with relatively low signal-to-noise ratios and by events with relatively short periods. The distribution of estimated transit depths appears to peak in the range between 20 and 30 parts per million, with a few detections down to fewer than 10 parts per million. The detections exhibit signal-to-noise ratios from 7.1 sigma, which is the lower cut-off for detections, to over 10,000 sigma, and periods ranging from 0.5 days, which is the shortest period searched, to 525 days, which is the upper limit of achievable periods given the length of the data set and the requirement that all detections include at least 3 transits. The detected signals are compared to a set of known transit events in the Kepler field of view, many of which were identified by alternative methods; the comparison shows that the current search recovery rate for targets with known transit events is 98.3%.
[19]  oai:arXiv.org:1303.0255  [pdf] - 1164952
Measuring Transit Signal Recovery in the Kepler Pipeline I: Individual Events
Comments: 40 pages, 18 figures, submitted to ApJ
Submitted: 2013-03-01
The Kepler Mission was designed to measure the frequency of Earth-size planets in the habitable zone of Sun-like stars. A crucial component for recovering the underlying planet population from a sample of detected planets is understanding the completeness of that sample - what fraction of the planets that could have been discovered in a given data set were actually detected. Here we outline the information required to determine the sample completeness, and describe an experiment to address a specific aspect of that question, which is the issue of transit signal recovery. We investigate the extent to which the Kepler pipeline preserves individual transit signals by injecting simulated transits into the pixel-level data, processing the modified pixels through the pipeline, and comparing the measured transit signal-to-noise ratio (SNR) to that expected without perturbation by the pipeline. We inject simulated transit signals across the full focal plane for a set of observations of length 89 days. On average, we find that the SNR of the injected signal is recovered at MS = 0.9973(+/-0.0012)xBS-0.0151(+/-0.0049), where MS is the measured SNR and BS is the baseline, or expected, SNR. The 1{\sigma} width of the distribution around this correlation is +/-2.64%. We discuss the pipeline processes that cause the measured SNR to deviate significantly from the baseline SNR; these are primarily the handling of data adjacent to spacecraft re-pointings and the removal of harmonics prior to the measurement of the SNR. Finally we outline the further work required to characterise the completeness of the Kepler pipeline.
[20]  oai:arXiv.org:1302.7029  [pdf] - 835327
Chi-Square Discriminators for Transiting Planet Detection in Kepler Data
Comments:
Submitted: 2013-02-27
The Kepler spacecraft observes a host of target stars to detect transiting planets. Requiring a 7.1 sigma detection in twelve quarters of data yields over 100,000 detections, many of which are false alarms. After a second cut is made on a robust detection statistic, some 50,000 or more targets still remain. These false alarms waste resources as they propagate through the remainder of the software pipeline and so a method to discriminate against them is crucial in maintaining the desired sensitivity to true events. This paper describes a chi-square test which represents a novel application of the formalism developed by Allen for false alarm mitigation in searches for gravitational waves. Using this technique, the false alarm rate can be lowered to ~5%.
[21]  oai:arXiv.org:1210.4592  [pdf] - 1152204
Photometrically derived masses and radii of the planet and star in the TrES-2 system
Comments: Accepted for publication in ApJ
Submitted: 2012-10-16, last modified: 2012-10-18
We measure the mass and radius of the star and planet in the TrES-2 system using 2.7 years of observations by the Kepler spacecraft. The light curve shows evidence for ellipsoidal variations and Doppler beaming on a period consistent with the orbital period of the planet with amplitudes of 2.79+0.44-0.62 and 3.44+0.32-0.37 parts per million (ppm) respectively, and a difference between the day and night side planetary flux of 3.41+0.55-0.82 ppm. We present an asteroseismic analysis of solar-like oscillations on TrES-2A which we use to calculate the stellar mass of 0.94+/-0.05 MSun and radius of 0.95+/-0.02 RSun. Using these stellar parameters, a transit model fit and the phase curve variations, we determine the planetary radius of 1.162+0.020-0.024 RJup and derive a mass for TrES-2b from the photometry of 1.44+/-0.21 MJup. The ratio of the ellipsoidal variation to the Doppler beaming amplitudes agrees to better than 2{\sigma} with theoretical predications, while our measured planet mass and radius agree within 2-{\sigma} of previously published values based on spectroscopic radial velocity measurements. We measure a geometric albedo of 0.0136+0.0022-0.0033 and an occultation (secondary eclipse) depth of 6.5+1.7-1.8 ppm which we combined with the day/night planetary flux ratio to model the atmosphere of TReS-2b. We find an atmosphere model that contains a temperature inversion is strongly preferred. We hypothesize that the Kepler bandpass probes a significantly greater atmospheric depth on the night side relative to the day side.
[22]  oai:arXiv.org:1207.2907  [pdf] - 1124785
Period and light curve fluctuations of the Kepler Cepheid V1154 Cyg
Comments: published in MNRAS: 8 pages, 7 figures
Submitted: 2012-07-12, last modified: 2012-10-12
We present a detailed period analysis of the bright Cepheid-type variable star V1154 Cygni (V =9.1 mag, P~4.9 d) based on almost 600 days of continuous observations by the Kepler space telescope. The data reveal significant cycle-to-cycle fluctuations in the pulsation period, indicating that classical Cepheids may not be as accurate astrophysical clocks as commonly believed: regardless of the specific points used to determine the O-C values, the cycle lengths show a scatter of 0.015-0.02 days over the 120 cycles covered by the observations. A very slight correlation between the individual Fourier parameters and the O-C values was found, suggesting that the O - C variations might be due to the instability of the light curve shape. Random fluctuation tests revealed a linear trend up to a cycle difference 15, but for long term, the period remains around the mean value. We compare the measurements with simulated light curves that were constructed to mimic V1154 Cyg as a perfect pulsator modulated only by the light travel time effect caused by low-mass companions. We show that the observed period jitter in V1154 Cyg represents a serious limitation in the search for binary companions. While the Kepler data are accurate enough to allow the detection of planetary bodies in close orbits around a Cepheid, the astrophysical noise can easily hide the signal of the light-time effect.
[23]  oai:arXiv.org:1208.3499  [pdf] - 1150740
Transit Timing Observations from Kepler: VII. Confirmation of 27 planets in 13 multiplanet systems via Transit Timing Variations and orbital stability
Comments: 12 pages, 13 figures, 5 tables. Submitted to MNRAS
Submitted: 2012-08-16
We confirm 27 planets in 13 planetary systems by showing the existence of statistically significant anti-correlated transit timing variations (TTVs), which demonstrates that the planet candidates are in the same system, and long-term dynamical stability, which places limits on the masses of the candidates---showing that they are planetary. %This overall method of planet confirmation was first applied to \kepler systems 23 through 32. All of these newly confirmed planetary systems have orbital periods that place them near first-order mean motion resonances (MMRs), including 6 systems near the 2:1 MMR, 5 near 3:2, and one each near 4:3, 5:4, and 6:5. In addition, several unconfirmed planet candidates exist in some systems (that cannot be confirmed with this method at this time). A few of these candidates would also be near first order MMRs with either the confirmed planets or with other candidates. One system of particular interest, Kepler-56 (KOI-1241), is a pair of planets orbiting a 12th magnitude, giant star with radius over three times that of the Sun and effective temperature of 4900 K---among the largest stars known to host a transiting exoplanetary system.
[24]  oai:arXiv.org:1208.0595  [pdf] - 1150476
The Derivation, Properties and Value of Kepler's Combined Differential Photometric Precision
Comments: 24 pages, 12 figures, submitted to PASP
Submitted: 2012-08-02
The Kepler Mission is searching for Earth-size planets orbiting solar-like stars by simultaneously observing >160,000 stars to detect sequences of transit events in the photometric light curves. The Combined Differential Photometric Precision (CDPP) is the metric that defines the ease with which these weak terrestrial transit signatures can be detected. An understanding of CDPP is invaluable for evaluating the completeness of the Kepler survey and inferring the underlying planet population. This paper describes how the Kepler CDPP is calculated, and introduces tables of rms CDPP on a per-target basis for 3-, 6-, and 12-hour transit durations, which are now available for all Kepler observations. Quarter 3 is the first typical set of observations at the nominal length and completeness for a quarter, from 2009 September 18 to 2009 December 16, and we examine the properties of the rms CDPP distribution for this data set. Finally, we describe how to employ CDPP to calculate target completeness, an important use case.
[25]  oai:arXiv.org:1201.1873  [pdf] - 1092817
Transit Timing Observations from Kepler: VI. Potentially interesting candidate systems from Fourier-based statistical tests
Comments: 32 pages, 6 of text and one long table, Accepted to ApJ
Submitted: 2012-01-09, last modified: 2012-07-30
We analyze the deviations of transit times from a linear ephemeris for the Kepler Objects of Interest (KOI) through Quarter six (Q6) of science data. We conduct two statistical tests for all KOIs and a related statistical test for all pairs of KOIs in multi-transiting systems. These tests identify several systems which show potentially interesting transit timing variations (TTVs). Strong TTV systems have been valuable for the confirmation of planets and their mass measurements. Many of the systems identified in this study should prove fruitful for detailed TTV studies.
[26]  oai:arXiv.org:1207.5804  [pdf] - 541866
Alignment of the stellar spin with the orbits of a three-planet system
Comments: Accepted and published in Nature (2012 July 26). This is the the final version of the paper, merged with the Supplementary Information; 30 pages total with 5 figures and 5 tables
Submitted: 2012-07-24
The Sun's equator and the planets' orbital planes are nearly aligned, which is presumably a consequence of their formation from a single spinning gaseous disk. For exoplanetary systems this well-aligned configuration is not guaranteed: dynamical interactions may tilt planetary orbits, or stars may be misaligned with the protoplanetary disk through chaotic accretion, magnetic interactions or torques from neighbouring stars. Indeed, isolated 'hot Jupiters' are often misaligned and even orbiting retrograde. Here we report an analysis of transits of planets over starspots on the Sun-like star Kepler-30, and show that the orbits of its three planets are aligned with the stellar equator. Furthermore, the orbits are aligned with one another to within a few degrees. This configuration is similar to that of our Solar System, and contrasts with the isolated hot Jupiters. The orderly alignment seen in the Kepler-30 system suggests that high obliquities are confined to systems that experienced disruptive dynamical interactions. Should this be corroborated by observations of other coplanar multi-planet systems, then star-disk misalignments would be ruled out as the explanation for the high obliquities of hot Jupiters, and dynamical interactions would be implicated as the origin of hot Jupiters.
[27]  oai:arXiv.org:1205.1344  [pdf] - 1123191
The complex case of V445 Lyr observed with Kepler: Two Blazhko modulations, a non-radial mode, possible triple mode RR Lyrae pulsation, and more
Comments: 19 pages, 20 figuers, accepted for publication in MNRAS
Submitted: 2012-05-07
Rapid and strong changes in the Blazhko modulation of RR Lyrae stars, as they have recently been detected in high precision satellite data, have become a crucial topic in finding an explanation of the long-standing mystery of the Blazhko effect. We present here an analysis of the most extreme case detected so far, the RRab star V445 Lyr (KIC 6186029) which was observed with the Kepler space mission. V445 Lyr shows very strong cycle-to-cycle changes in its Blazhko modulation, which are caused both by a secondary long-term modulation period as well as irregular variations. In addition to the complex Blazhko modulation, V445 Lyr also shows a rich spectrum of additional peaks in the frequency range between the fundamental pulsation and the first harmonic. Among those peaks, the second radial overtone could be identified, which, combined with a metallicity estimate of [Fe/H]=-2.0 dex from spectroscopy, allowed to constrain the mass (0.55-0.65 M_sun) and luminosity (40-50 L_sun) of V445 Lyr through theoretical Petersen diagrams. A non-radial mode as well as possibly the first overtone are also excited. Furthermore, V445 Lyr shows signs of the period doubling phenomenon and a long term period change. A detailed Fourier analysis along with a study of the O-C variation of V445 Lyr is presented, and the origin of the additional peaks and possible causes of the changes in the Blazhko modulation are discussed. The results are then put into context with those of the only other star with a variable Blazhko effect for which a long enough set of high precision continuous satellite data has been published so far, the CoRoT star 105288363.
[28]  oai:arXiv.org:1205.0554  [pdf] - 1123121
Detection of gravity modes in the massive binary V380 Cyg from Kepler spacebased photometry and high-resolution spectroscopy
Comments: 5 pages, 4 figures, 2 tables. Accepted for publication in MNRAS Letters
Submitted: 2012-05-02
We report the discovery of low-amplitude gravity-mode oscillations in the massive binary star V380 Cyg, from 180 d of Kepler custom-aperture space photometry and 5 months of high-resolution high signal-to-noise spectroscopy. The new data are of unprecedented quality and allowed to improve the orbital and fundamental parameters for this binary. The orbital solution was subtracted from the photometric data and led to the detection of periodic intrinsic variability with frequencies of which some are multiples of the orbital frequency and others are not. Spectral disentangling allowed the detection of line-profile variability in the primary. With our discovery of intrinsic variability interpreted as gravity mode oscillations, V380 Cyg becomes an important laboratory for future seismic tuning of the near-core physics in massive B-type stars.
[29]  oai:arXiv.org:1202.5852  [pdf] - 1116907
Planetary Candidates Observed by Kepler, III: Analysis of the First 16 Months of Data
Comments: Submitted to ApJS. Machine-readable tables are available at http://kepler.nasa.gov, http://archive.stsci.edu/kepler/results.html, and the NASA Exoplanet Archive
Submitted: 2012-02-27
New transiting planet candidates are identified in sixteen months (May 2009 - September 2010) of data from the Kepler spacecraft. Nearly five thousand periodic transit-like signals are vetted against astrophysical and instrumental false positives yielding 1,091 viable new planet candidates, bringing the total count up to over 2,300. Improved vetting metrics are employed, contributing to higher catalog reliability. Most notable is the noise-weighted robust averaging of multi-quarter photo-center offsets derived from difference image analysis which identifies likely background eclipsing binaries. Twenty-two months of photometry are used for the purpose of characterizing each of the new candidates. Ephemerides (transit epoch, T_0, and orbital period, P) are tabulated as well as the products of light curve modeling: reduced radius (Rp/R*), reduced semi-major axis (d/R*), and impact parameter (b). The largest fractional increases are seen for the smallest planet candidates (197% for candidates smaller than 2Re compared to 52% for candidates larger than 2Re) and those at longer orbital periods (123% for candidates outside of 50-day orbits versus 85% for candidates inside of 50-day orbits). The gains are larger than expected from increasing the observing window from thirteen months (Quarter 1-- Quarter 5) to sixteen months (Quarter 1 -- Quarter 6). This demonstrates the benefit of continued development of pipeline analysis software. The fraction of all host stars with multiple candidates has grown from 17% to 20%, and the paucity of short-period giant planets in multiple systems is still evident. The progression toward smaller planets at longer orbital periods with each new catalog release suggests that Earth-size planets in the Habitable Zone are forthcoming if, indeed, such planets are abundant.
[30]  oai:arXiv.org:1201.5424  [pdf] - 1093260
Almost All of Kepler's Multiple Planet Candidates are Planets
Comments: 16 pages, 9 figures
Submitted: 2012-01-25
We present a statistical analysis that demonstrates that the overwhelming majority of Kepler candidate multiple transiting systems (multis) indeed represent true, physically-associated transiting planets. Binary stars provide the primary source of false positives among Kepler planet candidates, implying that false positives should be nearly randomly-distributed among Kepler targets. In contrast, true transiting planets would appear clustered around a smaller number of Kepler targets if detectable planets tend to come in systems and/or if the orbital planes of planets encircling the same star are correlated. There are more than one hundred times as many Kepler planet candidates in multi-candidate systems as would be predicted from a random distribution of candidates, implying that the vast majority are true planets. Most of these multis are multiple planet systems orbiting the Kepler target star, but there are likely cases where (a) the planetary system orbits a fainter star, and the planets are thus significantly larger than has been estimated, or (b) the planets orbit different stars within a binary/multiple star system. We use the low overall false positive rate among Kepler multis, together with analysis of Kepler spacecraft and ground-based data, to validate the closely-packed Kepler-33 planetary system, which orbits a star that has evolved somewhat off of the main sequence. Kepler-33 hosts five transiting planets with periods ranging from 5.67 to 41 days.
[31]  oai:arXiv.org:1201.1048  [pdf] - 967262
Detection of Potential Transit Signals in the First Three Quarters of Kepler Mission Data
Comments:
Submitted: 2012-01-04, last modified: 2012-01-18
We present the results of a search for potential transit signals in the first three quarters of photometry data acquired by the Kepler Mission. The targets of the search include 151,722 stars which were observed over the full interval and an additional 19,132 stars which were observed for only 1 or 2 quarters. From this set of targets we find a total of 5,392 detections which meet the Kepler detection criteria: those criteria are periodicity of the signal, an acceptable signal-to-noise ratio, and a composition test which rejects spurious detections which contain non-physical combinations of events. The detected signals are dominated by events with relatively low signal-to-noise ratio and by events with relatively short periods. The distribution of estimated transit depths appears to peak in the range between 40 and 100 parts per million, with a few detections down to fewer than 10 parts per million. The detected signals are compared to a set of known transit events in the Kepler field of view which were derived by a different method using a longer data interval; the comparison shows that the current search correctly identified 88.1% of the known events. A tabulation of the detected transit signals, examples which illustrate the analysis and detection process, a discussion of future plans and open, potentially fruitful, areas of further research are included.
[32]  oai:arXiv.org:1112.4550  [pdf] - 453725
Two Earth-sized planets orbiting Kepler-20
Comments: Letter to Nature; Received 8 November; accepted 13 December 2011; Published online 20 December 2011
Submitted: 2011-12-19
Since the discovery of the first extrasolar giant planets around Sun-like stars, evolving observational capabilities have brought us closer to the detection of true Earth analogues. The size of an exoplanet can be determined when it periodically passes in front of (transits) its parent star, causing a decrease in starlight proportional to its radius. The smallest exoplanet hitherto discovered has a radius 1.42 times that of the Earth's radius (R Earth), and hence has 2.9 times its volume. Here we report the discovery of two planets, one Earth-sized (1.03R Earth) and the other smaller than the Earth (0.87R Earth), orbiting the star Kepler-20, which is already known to host three other, larger, transiting planets. The gravitational pull of the new planets on the parent star is too small to measure with current instrumentation. We apply a statistical method to show that the likelihood of the planetary interpretation of the transit signals is more than three orders of magnitude larger than that of the alternative hypothesis that the signals result from an eclipsing binary star. Theoretical considerations imply that these planets are rocky, with a composition of iron and silicate. The outer planet could have developed a thick water vapour atmosphere.
[33]  oai:arXiv.org:1110.3510  [pdf] - 1084890
Detection Of KOI-13.01 Using The Photometric Orbit
Comments: Accepted to AJ on October 4, 2011. Kepler Q5 Long Cadence data will become publicly available on MAST by October 23. Comments welcome (V2: minor changes, to reflect proof corrections)
Submitted: 2011-10-16, last modified: 2011-10-25
We use the KOI-13 transiting star-planet system as a test case for the recently developed BEER algorithm (Faigler & Mazeh 2011), aimed at identifying non-transiting low-mass companions by detecting the photometric variability induced by the companion along its orbit. Such photometric variability is generated by three mechanisms, including the beaming effect, tidal ellipsoidal distortion, and reflection/heating. We use data from three Kepler quarters, from the first year of the mission, while ignoring measurements within the transit and occultation, and show that the planet's ephemeris is clearly detected. We fit for the amplitude of each of the three effects and use the beaming effect amplitude to estimate the planet's minimum mass, which results in M_p sin i = 9.2 +/- 1.1 M_J (assuming the host star parameters derived by Szabo et al. 2011). Our results show that non-transiting star-planet systems similar to KOI-13.01 can be detected in Kepler data, including a measurement of the orbital ephemeris and the planet's minimum mass. Moreover, we derive a realistic estimate of the amplitudes uncertainties, and use it to show that data obtained during the entire lifetime of the Kepler mission, of 3.5 years, will allow detecting non-transiting close-in low-mass companions orbiting bright stars, down to the few Jupiter mass level. Data from the Kepler Extended Mission, if funded by NASA, will further improve the detection capabilities.
[34]  oai:arXiv.org:1110.1375  [pdf] - 1084696
Asteroseismic diagrams from a survey of solar-like oscillations with Kepler
Comments: 6 pages, 5 figures, accepted for publication in The Astrophysical Journal Letters
Submitted: 2011-10-06
Photometric observations made by the NASA Kepler Mission have led to a dramatic increase in the number of main-sequence and subgiant stars with detected solar-like oscillations. We present an ensemble asteroseismic analysis of 76 solar-type stars. Using frequencies determined from the Kepler time-series photometry, we have measured three asteroseismic parameters that characterize the oscillations: the large frequency separation (\Delta \nu), the small frequency separation between modes of l=0 and l=2 (\delta \nu_02), and the dimensionless offset (\epsilon). These measurements allow us to construct asteroseismic diagrams, namely the so-called C-D diagram of \delta \nu_02 versus \Delta \nu, and the recently re-introduced {\epsilon} diagram. We compare the Kepler results with previously observed solar-type stars and with theoretical models. The positions of stars in these diagrams places constraints on their masses and ages. Additionally, we confirm the observational relationship between {\epsilon} and T_eff that allows for the unambiguous determination of radial order and should help resolve the problem of mode identification in F stars.
[35]  oai:arXiv.org:1110.0135  [pdf] - 967106
Seismic analysis of four solar-like stars observed during more than eight months by Kepler
Comments: 5 pages, 1 figure. To appear in the ASP proceedings of "The 61st Fujihara seminar: Progress in solar/stellar physics with helio- and asteroseismology", 13th-17th March 2011, Hakone, Japan
Submitted: 2011-10-01
Having started science operations in May 2009, the Kepler photometer has been able to provide exquisite data of solar-like stars. Five out of the 42 stars observed continuously during the survey phase show evidence of oscillations, even though they are rather faint (magnitudes from 10.5 to 12). In this paper, we present an overview of the results of the seismic analysis of 4 of these stars observed during more than eight months.
[36]  oai:arXiv.org:1109.3460  [pdf] - 1084133
Testing Scaling Relations for Solar-Like Oscillations from the Main Sequence to Red Giants using Kepler Data
Comments: 11 pages, 9 figures, accepted for publication in ApJ
Submitted: 2011-09-15
We have analyzed solar-like oscillations in ~1700 stars observed by the Kepler Mission, spanning from the main-sequence to the red clump. Using evolutionary models, we test asteroseismic scaling relations for the frequency of maximum power (nu_max), the large frequency separation (Delta_nu) and oscillation amplitudes. We show that the difference of the Delta_nu-nu_max relation for unevolved and evolved stars can be explained by different distributions in effective temperature and stellar mass, in agreement with what is expected from scaling relations. For oscillation amplitudes, we show that neither (L/M)^s scaling nor the revised scaling relation by Kjeldsen & Bedding (2011) are accurate for red-giant stars, and demonstrate that a revised scaling relation with a separate luminosity-mass dependence can be used to calculate amplitudes from the main-sequence to red-giants to a precision of ~25%. The residuals show an offset particularly for unevolved stars, suggesting that an additional physical dependency is necessary to fully reproduce the observed amplitudes. We investigate correlations between amplitudes and stellar activity, and find evidence that the effect of amplitude suppression is most pronounced for subgiant stars. Finally, we test the location of the cool edge of the instability strip in the Hertzsprung-Russell diagram using solar-like oscillations and find the detections in the hottest stars compatible with a domain of hybrid stochastically excited and opacity driven pulsation.
[37]  oai:arXiv.org:1107.2596  [pdf] - 384954
The First Kepler Mission Planet Confirmed With The Hobby-Eberly Telescope: Kepler-15b, a Hot Jupiter Enriched In Heavy Elements
Comments: preprint, 33 pages, 12 figures, submitted to ApJ
Submitted: 2011-07-13
We report the discovery of Kepler-15b, a new transiting exoplanet detected by NASA's Kepler mission. The transit signal with a period of 4.94 days was detected in the quarter 1 (Q1) Kepler photometry. For the first time, we have used the High-Resolution-Spectrograph (HRS) at the Hobby-Eberly Telescope (HET) to determine the mass of a Kepler planet via precise radial velocity (RV) measurements. The 24 HET/HRS radial velocities (RV) and 6 additional measurements from the FIES spectrograph at the Nordic Optical Telescope (NOT) reveal a Doppler signal with the same period and phase as the transit ephemeris. We used one HET/HRS spectrum of Kepler-15 taken without the iodine cell to determine accurate stellar parameters. The host star is a metal-rich ([Fe/H]=0.36+/-0.07) G-type main sequence star with T_eff=5515+/-124 K. The amplitude of the RV-orbit yields a mass of the planet of 0.66+/-0.1 M_Jup. The planet has a radius of 0.96+/-0.06 R_Jup and a mean bulk density of 0.9+/-0.2 g/cm^3. The planetary radius resides on the lower envelope for transiting planets with similar mass and irradiation level. This suggests significant enrichment of the planet with heavy elements. We estimate a heavy element mass of 30-40 M_Earth within Kepler-15b.
[38]  oai:arXiv.org:1106.4530  [pdf] - 1077480
The architecture of the hierarchical triple star KOI 928 from eclipse timing variations seen in Kepler photometry
Comments: Submitted to MNRAS Letters. Additional tables with eclipse times are included here. The Kepler data that was used for the analysis of this system (Q1 through Q6) will be available on MAST after June 27, 2011
Submitted: 2011-06-22
We present a hierarchical triple star system (KIC 9140402) where a low mass eclipsing binary orbits a more massive third star. The orbital period of the binary (4.98829 Days) is determined by the eclipse times seen in photometry from NASA's Kepler spacecraft. The periodically changing tidal field, due to the eccentric orbit of the binary about the tertiary, causes a change in the orbital period of the binary. The resulting eclipse timing variations provide insight into the dynamics and architecture of this system and allow the inference of the total mass of the binary ($0.424 \pm 0.017 \text{M}_\odot$) and the orbital parameters of the binary about the central star.
[39]  oai:arXiv.org:1103.4085  [pdf] - 1052860
Solar-like oscillations in KIC11395018 and KIC11234888 from 8 months of Kepler data
Comments: 39 pages, 9 figures. Accepted for publication in ApJ
Submitted: 2011-03-21
We analyze the photometric short-cadence data obtained with the Kepler Mission during the first eight months of observations of two solar-type stars of spectral types G and F: KIC 11395018 and KIC 11234888 respectively, the latter having a lower signal-to-noise ratio compared to the former. We estimate global parameters of the acoustic (p) modes such as the average large and small frequency separations, the frequency of the maximum of the p-mode envelope and the average linewidth of the acoustic modes. We were able to identify and to measure 22 p-mode frequencies for the first star and 16 for the second one even though the signal-to-noise ratios of these stars are rather low. We also derive some information about the stellar rotation periods from the analyses of the low-frequency parts of the power spectral densities. A model-independent estimation of the mean density, mass and radius are obtained using the scaling laws. We emphasize the importance of continued observations for the stars with low signal-to-noise ratio for an improved characterization of the oscillation modes. Our results offer a preview of what will be possible for many stars with the long data sets obtained during the remainder of the mission.
[40]  oai:arXiv.org:1103.1659  [pdf] - 1052579
Kepler Eclipsing Binary Stars. II. 2165 Eclipsing Binaries in the Second Data Release
Comments: 29 pages, 12 figures. Submitted to the AJ. An online version of the catalog is maintained at http://keplerEBs.villanova.edu/
Submitted: 2011-03-08
The Kepler Mission provides nearly continuous monitoring of ~156 000 objects with unprecedented photometric precision. Coincident with the first data release, we presented a catalog of 1879 eclipsing binary systems identified within the 115 square degree Kepler FOV. Here, we provide an updated catalog augmented with the second Kepler data release which increases the baseline nearly 4-fold to 125 days. 386 new systems have been added, ephemerides and principle parameters have been recomputed. We have removed 42 previously cataloged systems that are now clearly recognized as short-period pulsating variables and another 58 blended systems where we have determined that the Kepler target object is not itself the eclipsing binary. A number of interesting objects are identified. We present several exemplary cases: 4 EBs that exhibit extra (tertiary) eclipse events; and 8 systems that show clear eclipse timing variations indicative of the presence of additional bodies bound in the system. We have updated the period and galactic latitude distribution diagrams. With these changes, the total number of identified eclipsing binary systems in the Kepler field-of-view has increased to 2165, 1.4% of the Kepler target stars.