sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Roman, P.

Normalized to: Roman, P.

6 article(s) in total. 31 co-authors, from 1 to 5 common article(s). Median position in authors list is 4,5.

[1]  oai:arXiv.org:1505.06808  [pdf] - 1303987
Planet formation signposts: observability of circumplanetary disks via gas kinematics
Comments: 6 pages, 4 figures. Published in ApJL
Submitted: 2015-05-26, last modified: 2015-11-03
The identification of on-going planet formation requires the finest angular resolutions and deepest sensitivities in observations inspired by state-of-the-art numerical simulations. Hydrodynamic simulations of planet-disk interactions predict the formation of circumplanetary disks (CPDs) around accreting planetary cores. These CPDs have eluded unequivocal detection -their identification requires predictions in CPD tracers. In this work, we aim to assess the observability of embedded CPDs with ALMA as features imprinted in the gas kinematics. We use 3D Smooth Particle Hydrodynamic (SPH) simulations of CPDs around 1 and 5 M_Jup planets at large stellocentric radii, in locally isothermal and adiabatic disks. The simulations are then connected with 3D radiative transfer for predictions in CO isotopologues. Observability is assessed by corrupting with realistic long baseline phase noise extracted from the recent HL Tau ALMA data. We find that the presence of a CPD produces distinct signposts: 1) compact emission separated in velocity from the overall circumstellar disk's Keplerian pattern, 2) a strong impact on the velocity pattern when the Doppler shifted line emission sweeps across the CPD location, and 3) a local increase in the velocity dispersion. We test our predictions with a simulation tailored for HD 100546 -which has a reported protoplanet candidate. We find that the CPDs are detectable in all 3 signposts with ALMA Cycle 3 capabilities for both 1 and 5 M_Jup protoplanets, when embedded in an isothermal disk.
[2]  oai:arXiv.org:1505.06732  [pdf] - 1303986
Compact dust concentration in the MWC 758 protoplanetary disk
Comments: Accepted for publication in ApJ
Submitted: 2015-05-25, last modified: 2015-10-02
The formation of planetesimals requires that primordial dust grains grow from micron- to km-sized bodies. Dust traps caused by gas pressure maxima have been proposed as regions where grains can concentrate and grow fast enough to form planetesimals, before radially migrating onto the star. We report new VLA Ka & Ku observations of the protoplanetary disk around the Herbig Ae/Be star MWC 758. The Ka image shows a compact emission region in the outer disk indicating a strong concentration of big dust grains. Tracing smaller grains, archival ALMA data in band 7 continuum shows extended disk emission with an intensity maximum to the north-west of the central star, which matches the VLA clump position. The compactness of the Ka emission is expected in the context of dust trapping, as big grains are trapped more easily than smaller grains in gas pressure maxima. We develop a non-axisymmetric parametric model inspired by a steady state vortex solution with parameters adequately selected to reproduce the observations, including the spectral energy distribution. Finally, we compare the radio continuum with SPHERE scattered light data. The ALMA continuum spatially coincides with a spiral-like feature seen in scattered light, while the VLA clump is offset from the scattered light maximum. Moreover, the ALMA map shows a decrement that matches a region devoid of scattered polarised emission. Continuum observations at a different wavelength are necessary to conclude if the VLA-ALMA difference is an opacity or a real dust segregation.
[3]  oai:arXiv.org:1505.07743  [pdf] - 1361830
A compact concentration of large grains in the HD142527 protoplanetary dust trap
Comments: Submitted to ApJ
Submitted: 2015-05-28
A pathway to the formation of planetesimals, and eventually giant planets, may occur in concentrations of dust grains trapped in pressure maxima. Dramatic crescent-shaped dust concentrations have been seen in recent radio images at sub-mm wavelengths. These disk asymmetries could represent the initial phases of planet formation in the dust trap scenario, provided that grain sizes are spatially segregated. A testable prediction of azimuthal dust trapping is that progressively larger grains should be more sharply confined and furthermore the trapped grains should follow a distribution that is markedly different from the gas. However, gas tracers such as CO and the infrared emission from small grains are both very optically thick where the submm continuum originates, so observations have been unable to test the trapping predictions or to identify compact concentrations of larger grains required for planet formation by core-accretion. Here we report multifrequency observations of HD142527, from 34GHz to 700GHz, that reveal a compact concentration of ~cm-sized grains, with a few Earth masses, embedded in a large-scale crescent of ~mm-sized particles. The emission peaks at wavelengths shorter than ~1mm are optically thick and trace the temperature structure resulting from shadows cast by the inner regions. Given this temperature structure, we infer that the largest dust grains are concentrated in the 34 GHz clump. We conclude that dust trapping is efficient for approximately cm-sized grains and leads to enhanced concentrations, while the smaller grains largely reflect the gas distribution.
[4]  oai:arXiv.org:1505.07732  [pdf] - 1284824
Accretion kinematics through the warped transition disk in HD142527 from resolved CO(6-5) observations
Comments: Submitted to ApJ
Submitted: 2015-05-28
The finding of residual gas in the large central cavity of the HD142527 disk motivates questions on the origin of its non-Keplerian kinematics, and possible connections with planet formation. We aim to understand the physical structure that underlies the intra-cavity gaseous flows, guided by new molecular-line data in CO(6-5) with unprecedented angular resolutions. Given the warped structure inferred from the identification of scattered-light shadows cast on the outer disk, the kinematics are consistent, to first order, with axisymmetric accretion onto the inner disk occurring at all azimuth. A steady-state accretion profile, fixed at the stellar accretion rate, explains the depth of the cavity as traced in CO isotopologues. The abrupt warp and evidence for near free-fall radial flows in HD 142527 resemble theoretical models for disk tearing, which could be driven by the reported low mass companion, whose orbit may be contained in the plane of the inner disk. The companion's high inclination with respect to the massive outer disk could drive Kozai oscillations over long time-scales; high-eccentricity periods may perhaps account for the large cavity. While shadowing by the tilted disk could imprint an azimuthal modulation in the molecular-line maps, further observations are required to ascertain the significance of azimuthal structure in the density field inside the cavity of HD142527.
[5]  oai:arXiv.org:1410.8168  [pdf] - 1222884
CO gas inside the protoplanetary disk cavity in HD 142527: disk structure from ALMA
Comments: 13 pages, 10 figures. Accepted for publication in ApJ Main Journal
Submitted: 2014-10-29
Inner cavities and annular gaps in circumstellar disks are possible signposts of giant planet formation. The young star HD 142527 hosts a massive protoplanetary disk with a large cavity that extends up to 140 au from the central star, as seen in continuum images at infrared and millimeter wavelengths. Estimates of the survival of gas inside disk cavities are needed to discriminate between clearing scenarios. We present a spatially and spectrally resolved carbon monoxide isotopologue observations of the gas-rich disk HD 142527, in the J=2-1 line of 12CO, 13CO and C18O, obtained with the Atacama Large Millimeter Array (ALMA). We detect emission coming from inside the dust-depleted cavity in all three isotopologues. Based on our analysis of the gas in the dust cavity, the 12CO emission is optically thick, while 13CO and C18O emission are both optically thin. The total mass of residual gas inside the cavity is about 1.5-2 Jupiter masses. We model the gas with an axisymmetric disk model. Our best fit model shows that the cavity radius is much smaller in CO than it is in millimeter continuum and scattered light observations, with a gas cavity that does not extend beyond 105 au (at 3-sigma). The gap wall at its outer edge is diffuse and smooth in the gas distribution, while in dust continuum it is manifestly sharper. The inclination angle, as estimated from the high velocity channel maps, is 28+/-0.5 degrees, higher than in previous estimates, assuming a fix central star mass of 2.2 Solar masses.
[6]  oai:arXiv.org:astro-ph/9910297  [pdf] - 108851
The ISOCAM/LW Detector Dark Current Behaviour
Comments: 24 pages, accepted for publication in Experimental Astronomy
Submitted: 1999-10-15
We describe the calibration, measurements and data reduction, of the dark current of the ISOCAM/LW detector. We point-out the existence of two significant drifts of the LW dark-current, one throughout the ISO mission, on a timescale of days, another within each single revolution, on a timescale of hours. We also show the existence of a dependence of the dark current on the temperature of the ISOCAM detector. By characterizing all these effects through polynomial fittings, we build a model for the LW calibration dark, that depends on the epoch of observation (parametrized with the revolution number and the time elapsed in that given revolution since the activation) and on the temperature of the ISOCAM detector. The model parameters are tuned for each of ISOCAM/LW pixel. We show that the modelling is very effective in taking into account the dark-current variations and allows a much cleaner dark subtraction than using a brute average of several calibration dark images. The residuals of the LW model-dark subtraction are, on average, similar to the pre-launch expectation.