sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Fedrigo, Enrico

Normalized to: Fedrigo, E.

7 article(s) in total. 173 co-authors, from 1 to 5 common article(s). Median position in authors list is 11,0.

[1]  oai:arXiv.org:1902.04080  [pdf] - 1996682
SPHERE: the exoplanet imager for the Very Large Telescope
Comments: Final version accepted for publication in A&A
Submitted: 2019-02-11, last modified: 2019-10-03
Observations of circumstellar environments to look for the direct signal of exoplanets and the scattered light from disks has significant instrumental implications. In the past 15 years, major developments in adaptive optics, coronagraphy, optical manufacturing, wavefront sensing and data processing, together with a consistent global system analysis have enabled a new generation of high-contrast imagers and spectrographs on large ground-based telescopes with much better performance. One of the most productive is the Spectro-Polarimetic High contrast imager for Exoplanets REsearch (SPHERE) designed and built for the ESO Very Large Telescope (VLT) in Chile. SPHERE includes an extreme adaptive optics system, a highly stable common path interface, several types of coronagraphs and three science instruments. Two of them, the Integral Field Spectrograph (IFS) and the Infra-Red Dual-band Imager and Spectrograph (IRDIS), are designed to efficiently cover the near-infrared (NIR) range in a single observation for efficient young planet search. The third one, ZIMPOL, is designed for visible (VIR) polarimetric observation to look for the reflected light of exoplanets and the light scattered by debris disks. This suite of three science instruments enables to study circumstellar environments at unprecedented angular resolution both in the visible and the near-infrared. In this work, we present the complete instrument and its on-sky performance after 4 years of operations at the VLT.
[2]  oai:arXiv.org:1207.2945  [pdf] - 1124789
The GRAVITY Coud\'e Infrared Adaptive Optics (CIAO) system for the VLT Interferometer
Comments: to be published in Proc. SPIE vol. 8446 (2012)
Submitted: 2012-07-12
GRAVITY is a second generation instrument for the VLT Interferometer, designed to enhance the near-infrared astrometric and spectro-imaging capabilities of VLTI. Combining beams from four telescopes, GRAVITY will provide an astrometric precision of order 10 micro-arcseconds, imaging resolution of 4 milli-arcseconds, and low and medium resolution spectro-interferometry, pushing its performance far beyond current infrared interfero- metric capabilities. To maximise the performance of GRAVITY, adaptive optics correction will be implemented at each of the VLT Unit Telescopes to correct for the effects of atmospheric turbulence. To achieve this, the GRAVITY project includes a development programme for four new wavefront sensors (WFS) and NIR-optimized real time control system. These devices will enable closed-loop adaptive correction at the four Unit Telescopes in the range 1.4-2.4 {\mu}m. This is crucially important for an efficient adaptive optics implementation in regions where optically bright references sources are scarce, such as the Galactic Centre. We present here the design of the GRAVITY wavefront sensors and give an overview of the expected adaptive optics performance under typical observing conditions. Benefiting from newly developed SELEX/ESO SAPHIRA electron avalanche photodiode (eAPD) detectors providing fast readout with low noise in the near-infrared, the AO systems are expected to achieve residual wavefront errors of \leq400 nm at an operating frequency of 500 Hz.
[3]  oai:arXiv.org:0911.4879  [pdf] - 902538
Layer Oriented Wavefront sensor for MAD on Sky operations
Comments: 12 pages, 10 figures, typo and cut&paste-corrected Proceedings of the SPIE, Volume 7015, pp. 70155P-70155P-12 (Marseille 2008)
Submitted: 2009-11-25
The Multiconjugate Adaptive optics Demonstrator (MAD) has successfully demonstrated on sky both Star Oriented (SO) and Layer Oriented (LO) multiconjugate adaptive optics techniques. While SO has been realized using 3 Shack-Hartmann wavefront sensors (WFS), we designed a multi-pyramid WFS for the LO. The MAD bench accommodates both WFSs and a selecting mirror allows choosing which sensor to use. In the LO approach up to 8 pyramids can be placed on as many reference stars and their light is co-added optically on two different CCDs conjugated at ground and to an high layer. In this paper we discuss LO commissioning phase and on sky operations.
[4]  oai:arXiv.org:astro-ph/0608010  [pdf] - 83887
On-sky results of the adaptive optics MACAO for the new IR-spectrograph CRIRES at VLT
Comments: SPIE conference 2006, Advances in adaptive optics, 12 pages, 11 figures
Submitted: 2006-08-01
The adaptive optics MACAO has been implemented in 6 focii of the VLT observatory, in three different flavors. We present in this paper the results obtained during the commissioning of the last of these units, MACAO-CRIRES. CRIRES is a high-resolution spectrograph, which efficiency will be improved by a factor two at least for point-sources observations with a NGS brighter than R=15. During the commissioning, Strehl exceeding 60% have been observed with fair seeing conditions, and a general description of the performance of this curvature adaptive optics system is done.
[5]  oai:arXiv.org:astro-ph/0608011  [pdf] - 83888
MACAO-CRIRES, a step towards high-resolution spectroscopy
Comments: SPIE conference 2004, Advances in adaptive optics, 12 pages, 15 figures
Submitted: 2006-08-01
High resolution spectroscopy made an important step ahead 10 years ago, leading for example to the discovery of numerous exoplanets. But the IR did not benefit from this improvement until very recently. CRIRES will provide a dramatic improvement in the 1-5 micron region in this field. Adaptive optics will allow us increasing both flux and angular resolution on its spectra. This paper describes the adaptive optics of CRIRES, its main limitations, its main components, the principle of its calibration with an overview of the methods used and the very first results obtained since it is installed in the laboratory.
[6]  oai:arXiv.org:astro-ph/0407445  [pdf] - 66287
Simulations of Adaptive Optics with a Laser Guide Star for SINFONI
Comments: 12 pages, 6 figures, to appear in SPIE conference proceedings vol 5490, "Advancements in Adaptive Optics", eds. D. Bonaccini, B.L. Ellerbroek, R. Ragazonni, Glasgow UK, 21-25 June 2004
Submitted: 2004-07-21
The SINFONI instrument for ESO's VLT combines integral field spectroscopy and adaptive optics (AO). We discuss detailed simulations of the adaptive optics module. These simulations are aimed at assessing the AO module performance, specifically for operations with extended sources and a laser guide star. Simulated point spread function (PSF) images will be used to support scientific preparations and the development of an exposure time calculator, while simulated wavefront sensor measurements will be used to study PSF reconstruction methods. We explain how the adaptive optics simulations work, focusing on the realistic modelling of the laser guide star for a curvature wavefront sensor. The predicted performance of the AO module is discussed, resulting in recommendations for the operation of the SINFONI AO module at the telescope.
[7]  oai:arXiv.org:astro-ph/0306191  [pdf] - 57272
SINFONI - Integral Field Spectroscopy at 50 milli-arcsecond resolution with the ESO VLT
Comments: This paper was published in Proc. SPIE, 4841, pp. 1548-1561 (2003), and is made available as an electronic reprint with permission of SPIE. Copyright notice added to first page of article
Submitted: 2003-06-10, last modified: 2003-06-11
SINFONI is an adaptive optics assisted near-infrared integral field spectrometer for the ESO VLT. The Adaptive Optics Module (built by the ESO Adaptive Optics Group) is a 60-elements curvature-sensor based system, designed for operations with natural or sodium laser guide stars. The near-infrared integral field spectrometer SPIFFI (built by the Infrared Group of MPE) provides simultaneous spectroscopy of 32 x 32 spatial pixels, and a spectral resolving power of up to 3300. The adaptive optics module is in the phase of integration; the spectrometer is presently tested in the laboratory. We provide an overview of the project, with particular emphasis on the problems encountered in designing and building an adaptive optics assisted spectrometer.