sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Bryan, S. E.

Normalized to: Bryan, S.

58 article(s) in total. 591 co-authors, from 1 to 30 common article(s). Median position in authors list is 6,0.

[1]  oai:arXiv.org:2002.05771  [pdf] - 2048640
Particle response of antenna-coupled TES arrays: results from SPIDER and the lab
Comments: 9 pages, 6 figures, Proceedings of the 18th International Workshop on Low Temperature Detectors
Submitted: 2020-02-13
Future mm-wave and sub-mm space missions will employ large arrays of multiplexed Transition Edge Sensor (TES) bolometers. Such instruments must contend with the high flux of cosmic rays beyond our atmosphere that induce "glitches" in bolometer data, which posed a challenge to data analysis from the Planck bolometers. Future instruments will face the additional challenges of shared substrate wafers and multiplexed readout wiring. In this work we explore the susceptibility of modern TES arrays to the cosmic ray environment of space using two data sets: the 2015 long-duration balloon flight of the SPIDER cosmic microwave background polarimeter, and a laboratory exposure of SPIDER flight hardware to radioactive sources. We find manageable glitch rates and short glitch durations, leading to minimal effect on SPIDER analysis. We constrain energy propagation within the substrate through a study of multi-detector coincidences, and give a preliminary look at pulse shapes in laboratory data.
[2]  oai:arXiv.org:1908.01062  [pdf] - 1928247
CMB-S4 Decadal Survey APC White Paper
Abazajian, Kevork; Addison, Graeme; Adshead, Peter; Ahmed, Zeeshan; Allen, Steven W.; Alonso, David; Alvarez, Marcelo; Amin, Mustafa A.; Anderson, Adam; Arnold, Kam S.; Baccigalupi, Carlo; Bailey, Kathy; Barkats, Denis; Barron, Darcy; Barry, Peter S.; Bartlett, James G.; Thakur, Ritoban Basu; Battaglia, Nicholas; Baxter, Eric; Bean, Rachel; Bebek, Chris; Bender, Amy N.; Benson, Bradford A.; Berger, Edo; Bhimani, Sanah; Bischoff, Colin A.; Bleem, Lindsey; Bock, James J.; Bocquet, Sebastian; Boddy, Kimberly; Bonato, Matteo; Bond, J. Richard; Borrill, Julian; Bouchet, François R.; Brown, Michael L.; Bryan, Sean; Burkhart, Blakesley; Buza, Victor; Byrum, Karen; Calabrese, Erminia; Calafut, Victoria; Caldwell, Robert; Carlstrom, John E.; Carron, Julien; Cecil, Thomas; Challinor, Anthony; Chang, Clarence L.; Chinone, Yuji; Cho, Hsiao-Mei Sherry; Cooray, Asantha; Crawford, Thomas M.; Crites, Abigail; Cukierman, Ari; Cyr-Racine, Francis-Yan; de Haan, Tijmen; de Zotti, Gianfranco; Delabrouille, Jacques; Demarteau, Marcel; Devlin, Mark; Di Valentino, Eleonora; Dobbs, Matt; Duff, Shannon; Duivenvoorden, Adriaan; Dvorkin, Cora; Edwards, William; Eimer, Joseph; Errard, Josquin; Essinger-Hileman, Thomas; Fabbian, Giulio; Feng, Chang; Ferraro, Simone; Filippini, Jeffrey P.; Flauger, Raphael; Flaugher, Brenna; Fraisse, Aurelien A.; Frolov, Andrei; Galitzki, Nicholas; Galli, Silvia; Ganga, Ken; Gerbino, Martina; Gilchriese, Murdock; Gluscevic, Vera; Green, Daniel; Grin, Daniel; Grohs, Evan; Gualtieri, Riccardo; Guarino, Victor; Gudmundsson, Jon E.; Habib, Salman; Haller, Gunther; Halpern, Mark; Halverson, Nils W.; Hanany, Shaul; Harrington, Kathleen; Hasegawa, Masaya; Hasselfield, Matthew; Hazumi, Masashi; Heitmann, Katrin; Henderson, Shawn; Henning, Jason W.; Hill, J. Colin; Hlozek, Renée; Holder, Gil; Holzapfel, William; Hubmayr, Johannes; Huffenberger, Kevin M.; Huffer, Michael; Hui, Howard; Irwin, Kent; Johnson, Bradley R.; Johnstone, Doug; Jones, William C.; Karkare, Kirit; Katayama, Nobuhiko; Kerby, James; Kernovsky, Sarah; Keskitalo, Reijo; Kisner, Theodore; Knox, Lloyd; Kosowsky, Arthur; Kovac, John; Kovetz, Ely D.; Kuhlmann, Steve; Kuo, Chao-lin; Kurita, Nadine; Kusaka, Akito; Lahteenmaki, Anne; Lawrence, Charles R.; Lee, Adrian T.; Lewis, Antony; Li, Dale; Linder, Eric; Loverde, Marilena; Lowitz, Amy; Madhavacheril, Mathew S.; Mantz, Adam; Matsuda, Frederick; Mauskopf, Philip; McMahon, Jeff; Meerburg, P. Daniel; Melin, Jean-Baptiste; Meyers, Joel; Millea, Marius; Mohr, Joseph; Moncelsi, Lorenzo; Mroczkowski, Tony; Mukherjee, Suvodip; Münchmeyer, Moritz; Nagai, Daisuke; Nagy, Johanna; Namikawa, Toshiya; Nati, Federico; Natoli, Tyler; Negrello, Mattia; Newburgh, Laura; Niemack, Michael D.; Nishino, Haruki; Nordby, Martin; Novosad, Valentine; O'Connor, Paul; Obied, Georges; Padin, Stephen; Pandey, Shivam; Partridge, Bruce; Pierpaoli, Elena; Pogosian, Levon; Pryke, Clement; Puglisi, Giuseppe; Racine, Benjamin; Raghunathan, Srinivasan; Rahlin, Alexandra; Rajagopalan, Srini; Raveri, Marco; Reichanadter, Mark; Reichardt, Christian L.; Remazeilles, Mathieu; Rocha, Graca; Roe, Natalie A.; Roy, Anirban; Ruhl, John; Salatino, Maria; Saliwanchik, Benjamin; Schaan, Emmanuel; Schillaci, Alessandro; Schmittfull, Marcel M.; Scott, Douglas; Sehgal, Neelima; Shandera, Sarah; Sheehy, Christopher; Sherwin, Blake D.; Shirokoff, Erik; Simon, Sara M.; Slosar, Anze; Somerville, Rachel; Staggs, Suzanne T.; Stark, Antony; Stompor, Radek; Story, Kyle T.; Stoughton, Chris; Suzuki, Aritoki; Tajima, Osamu; Teply, Grant P.; Thompson, Keith; Timbie, Peter; Tomasi, Maurizio; Treu, Jesse I.; Tristram, Matthieu; Tucker, Gregory; Umiltà, Caterina; van Engelen, Alexander; Vieira, Joaquin D.; Vieregg, Abigail G.; Vogelsberger, Mark; Wang, Gensheng; Watson, Scott; White, Martin; Whitehorn, Nathan; Wollack, Edward J.; Wu, W. L. Kimmy; Xu, Zhilei; Yasini, Siavash; Yeck, James; Yoon, Ki Won; Young, Edward; Zonca, Andrea
Comments: Project White Paper submitted to the 2020 Decadal Survey, 10 pages plus references. arXiv admin note: substantial text overlap with arXiv:1907.04473
Submitted: 2019-07-31
We provide an overview of the science case, instrument configuration and project plan for the next-generation ground-based cosmic microwave background experiment CMB-S4, for consideration by the 2020 Decadal Survey.
[3]  oai:arXiv.org:1907.08284  [pdf] - 1976842
The Simons Observatory: Astro2020 Decadal Project Whitepaper
The Simons Observatory Collaboration; Abitbol, Maximilian H.; Adachi, Shunsuke; Ade, Peter; Aguirre, James; Ahmed, Zeeshan; Aiola, Simone; Ali, Aamir; Alonso, David; Alvarez, Marcelo A.; Arnold, Kam; Ashton, Peter; Atkins, Zachary; Austermann, Jason; Awan, Humna; Baccigalupi, Carlo; Baildon, Taylor; Lizancos, Anton Baleato; Barron, Darcy; Battaglia, Nick; Battye, Richard; Baxter, Eric; Bazarko, Andrew; Beall, James A.; Bean, Rachel; Beck, Dominic; Beckman, Shawn; Beringue, Benjamin; Bhandarkar, Tanay; Bhimani, Sanah; Bianchini, Federico; Boada, Steven; Boettger, David; Bolliet, Boris; Bond, J. Richard; Borrill, Julian; Brown, Michael L.; Bruno, Sarah Marie; Bryan, Sean; Calabrese, Erminia; Calafut, Victoria; Calisse, Paolo; Carron, Julien; Carl, Fred. M; Cayuso, Juan; Challinor, Anthony; Chesmore, Grace; Chinone, Yuji; Chluba, Jens; Cho, Hsiao-Mei Sherry; Choi, Steve; Clark, Susan; Clarke, Philip; Contaldi, Carlo; Coppi, Gabriele; Cothard, Nicholas F.; Coughlin, Kevin; Coulton, Will; Crichton, Devin; Crowley, Kevin D.; Crowley, Kevin T.; Cukierman, Ari; D'Ewart, John M.; Dünner, Rolando; de Haan, Tijmen; Devlin, Mark; Dicker, Simon; Dober, Bradley; Duell, Cody J.; Duff, Shannon; Duivenvoorden, Adri; Dunkley, Jo; Bouhargani, Hamza El; Errard, Josquin; Fabbian, Giulio; Feeney, Stephen; Fergusson, James; Ferraro, Simone; Fluxà, Pedro; Freese, Katherine; Frisch, Josef C.; Frolov, Andrei; Fuller, George; Galitzki, Nicholas; Gallardo, Patricio A.; Ghersi, Jose Tomas Galvez; Gao, Jiansong; Gawiser, Eric; Gerbino, Martina; Gluscevic, Vera; Goeckner-Wald, Neil; Golec, Joseph; Gordon, Sam; Gralla, Megan; Green, Daniel; Grigorian, Arpi; Groh, John; Groppi, Chris; Guan, Yilun; Gudmundsson, Jon E.; Halpern, Mark; Han, Dongwon; Hargrave, Peter; Harrington, Kathleen; Hasegawa, Masaya; Hasselfield, Matthew; Hattori, Makoto; Haynes, Victor; Hazumi, Masashi; Healy, Erin; Henderson, Shawn W.; Hensley, Brandon; Hervias-Caimapo, Carlos; Hill, Charles A.; Hill, J. Colin; Hilton, Gene; Hilton, Matt; Hincks, Adam D.; Hinshaw, Gary; Hložek, Renée; Ho, Shirley; Ho, Shuay-Pwu Patty; Hoang, Thuong D.; Hoh, Jonathan; Hotinli, Selim C.; Huang, Zhiqi; Hubmayr, Johannes; Huffenberger, Kevin; Hughes, John P.; Ijjas, Anna; Ikape, Margaret; Irwin, Kent; Jaffe, Andrew H.; Jain, Bhuvnesh; Jeong, Oliver; Johnson, Matthew; Kaneko, Daisuke; Karpel, Ethan D.; Katayama, Nobuhiko; Keating, Brian; Keskitalo, Reijo; Kisner, Theodore; Kiuchi, Kenji; Klein, Jeff; Knowles, Kenda; Kofman, Anna; Koopman, Brian; Kosowsky, Arthur; Krachmalnicoff, Nicoletta; Kusaka, Akito; LaPlante, Phil; Lashner, Jacob; Lee, Adrian; Lee, Eunseong; Lewis, Antony; Li, Yaqiong; Li, Zack; Limon, Michele; Linder, Eric; Liu, Jia; Lopez-Caraballo, Carlos; Louis, Thibaut; Lungu, Marius; Madhavacheril, Mathew; Mak, Daisy; Maldonado, Felipe; Mani, Hamdi; Mates, Ben; Matsuda, Frederick; Maurin, Loïc; Mauskopf, Phil; May, Andrew; McCallum, Nialh; McCarrick, Heather; McKenney, Chris; McMahon, Jeff; Meerburg, P. Daniel; Mertens, James; Meyers, Joel; Miller, Amber; Mirmelstein, Mark; Moodley, Kavilan; Moore, Jenna; Munchmeyer, Moritz; Munson, Charles; Murata, Masaaki; Naess, Sigurd; Namikawa, Toshiya; Nati, Federico; Navaroli, Martin; Newburgh, Laura; Nguyen, Ho Nam; Nicola, Andrina; Niemack, Mike; Nishino, Haruki; Nishinomiya, Yume; Orlowski-Scherer, John; Pagano, Luca; Partridge, Bruce; Perrotta, Francesca; Phakathi, Phumlani; Piccirillo, Lucio; Pierpaoli, Elena; Pisano, Giampaolo; Poletti, Davide; Puddu, Roberto; Puglisi, Giuseppe; Raum, Chris; Reichardt, Christian L.; Remazeilles, Mathieu; Rephaeli, Yoel; Riechers, Dominik; Rojas, Felipe; Rotti, Aditya; Roy, Anirban; Sadeh, Sharon; Sakurai, Yuki; Salatino, Maria; Rao, Mayuri Sathyanarayana; Saunders, Lauren; Schaan, Emmanuel; Schmittfull, Marcel; Sehgal, Neelima; Seibert, Joseph; Seljak, Uros; Shellard, Paul; Sherwin, Blake; Shimon, Meir; Sierra, Carlos; Sievers, Jonathan; Sifon, Cristobal; Sikhosana, Precious; Silva-Feaver, Maximiliano; Simon, Sara M.; Sinclair, Adrian; Smith, Kendrick; Sohn, Wuhyun; Sonka, Rita; Spergel, David; Spisak, Jacob; Staggs, Suzanne T.; Stein, George; Stevens, Jason R.; Stompor, Radek; Suzuki, Aritoki; Tajima, Osamu; Takakura, Satoru; Teply, Grant; Thomas, Daniel B.; Thorne, Ben; Thornton, Robert; Trac, Hy; Treu, Jesse; Tsai, Calvin; Tucker, Carole; Ullom, Joel; Vagnozzi, Sunny; van Engelen, Alexander; Van Lanen, Jeff; Van Winkle, Daniel D.; Vavagiakis, Eve M.; Vergès, Clara; Vissers, Michael; Wagoner, Kasey; Walker, Samantha; Wang, Yuhan; Ward, Jon; Westbrook, Ben; Whitehorn, Nathan; Williams, Jason; Williams, Joel; Wollack, Edward; Xu, Zhilei; Yasini, Siavash; Young, Edward; Yu, Byeonghee; Yu, Cyndia; Zago, Fernando; Zannoni, Mario; Zhang, Hezi; Zheng, Kaiwen; Zhu, Ningfeng; Zonca, Andrea
Comments: Astro2020 Decadal Project Whitepaper. arXiv admin note: text overlap with arXiv:1808.07445
Submitted: 2019-07-16
The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021 and start a five year survey in 2022. SO has 287 collaborators from 12 countries and 53 institutions, including 85 students and 90 postdocs. The SO experiment in its currently funded form ('SO-Nominal') consists of three 0.4 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT). Optimized for minimizing systematic errors in polarization measurements at large angular scales, the SATs will perform a deep, degree-scale survey of 10% of the sky to search for the signature of primordial gravitational waves. The LAT will survey 40% of the sky with arc-minute resolution. These observations will measure (or limit) the sum of neutrino masses, search for light relics, measure the early behavior of Dark Energy, and refine our understanding of the intergalactic medium, clusters and the role of feedback in galaxy formation. With up to ten times the sensitivity and five times the angular resolution of the Planck satellite, and roughly an order of magnitude increase in mapping speed over currently operating ("Stage 3") experiments, SO will measure the CMB temperature and polarization fluctuations to exquisite precision in six frequency bands from 27 to 280 GHz. SO will rapidly advance CMB science while informing the design of future observatories such as CMB-S4.
[4]  oai:arXiv.org:1907.04756  [pdf] - 1914319
The Atacama Large Aperture Submillimeter Telescope (AtLAST)
Comments: Submitted to call for Astro2020 APC papers
Submitted: 2019-07-10
The sub-mm sky is a unique window for probing the architecture of the Universe and structures within it. From the discovery of dusty sub-mm galaxies, to the ringed nature of protostellar disks, our understanding of the formation, destruction, and evolution of objects in the Universe requires a comprehensive view of the sub-mm sky. The current generation single-dish sub-mm facilities have shown of the potential for discovery, while interferometers have presented a high resolution view into the finer details. However, our understanding of large-scale structure and our full use of these interferometers is now hampered by the limited sensitivity of our sub-mm view of the universe at larger scales. Thus, now is the time to start planning the next generation of sub-mm single dish facilities, to build on these revolutions in our understanding of the sub-mm sky. Here we present the case for the Atacama Large Aperture Submillimeter Telescope (AtLAST), a concept for a 50m class single dish telescope. We envision AtLAST as a facility operating as an international partnership with a suite of instruments to deliver the transformative science described in many Astro2020 science white papers. A 50m telescope with a high throughput and 1$^\circ$ FoV with a full complement of advanced instrumentation, including highly multiplexed high-resolution spectrometers, continuum cameras and Integral Field Units, AtLAST will have mapping speeds thousands of times greater than any current or planned facility. It will reach confusion limits below $L_*$ in the distant universe and resolve low-mass protostellar cores at the distance of the Galactic Center, providing synergies with upcoming facilities across the spectrum. Located on the Atacama plateau, to observe frequencies un-obtainable by other observatories, AtLAST will enable a fundamentally new understanding of the sub-mm universe at unprecedented depths.
[5]  oai:arXiv.org:1907.04473  [pdf] - 1914295
CMB-S4 Science Case, Reference Design, and Project Plan
Abazajian, Kevork; Addison, Graeme; Adshead, Peter; Ahmed, Zeeshan; Allen, Steven W.; Alonso, David; Alvarez, Marcelo; Anderson, Adam; Arnold, Kam S.; Baccigalupi, Carlo; Bailey, Kathy; Barkats, Denis; Barron, Darcy; Barry, Peter S.; Bartlett, James G.; Thakur, Ritoban Basu; Battaglia, Nicholas; Baxter, Eric; Bean, Rachel; Bebek, Chris; Bender, Amy N.; Benson, Bradford A.; Berger, Edo; Bhimani, Sanah; Bischoff, Colin A.; Bleem, Lindsey; Bocquet, Sebastian; Boddy, Kimberly; Bonato, Matteo; Bond, J. Richard; Borrill, Julian; Bouchet, François R.; Brown, Michael L.; Bryan, Sean; Burkhart, Blakesley; Buza, Victor; Byrum, Karen; Calabrese, Erminia; Calafut, Victoria; Caldwell, Robert; Carlstrom, John E.; Carron, Julien; Cecil, Thomas; Challinor, Anthony; Chang, Clarence L.; Chinone, Yuji; Cho, Hsiao-Mei Sherry; Cooray, Asantha; Crawford, Thomas M.; Crites, Abigail; Cukierman, Ari; Cyr-Racine, Francis-Yan; de Haan, Tijmen; de Zotti, Gianfranco; Delabrouille, Jacques; Demarteau, Marcel; Devlin, Mark; Di Valentino, Eleonora; Dobbs, Matt; Duff, Shannon; Duivenvoorden, Adriaan; Dvorkin, Cora; Edwards, William; Eimer, Joseph; Errard, Josquin; Essinger-Hileman, Thomas; Fabbian, Giulio; Feng, Chang; Ferraro, Simone; Filippini, Jeffrey P.; Flauger, Raphael; Flaugher, Brenna; Fraisse, Aurelien A.; Frolov, Andrei; Galitzki, Nicholas; Galli, Silvia; Ganga, Ken; Gerbino, Martina; Gilchriese, Murdock; Gluscevic, Vera; Green, Daniel; Grin, Daniel; Grohs, Evan; Gualtieri, Riccardo; Guarino, Victor; Gudmundsson, Jon E.; Habib, Salman; Haller, Gunther; Halpern, Mark; Halverson, Nils W.; Hanany, Shaul; Harrington, Kathleen; Hasegawa, Masaya; Hasselfield, Matthew; Hazumi, Masashi; Heitmann, Katrin; Henderson, Shawn; Henning, Jason W.; Hill, J. Colin; Hlozek, Renée; Holder, Gil; Holzapfel, William; Hubmayr, Johannes; Huffenberger, Kevin M.; Huffer, Michael; Hui, Howard; Irwin, Kent; Johnson, Bradley R.; Johnstone, Doug; Jones, William C.; Karkare, Kirit; Katayama, Nobuhiko; Kerby, James; Kernovsky, Sarah; Keskitalo, Reijo; Kisner, Theodore; Knox, Lloyd; Kosowsky, Arthur; Kovac, John; Kovetz, Ely D.; Kuhlmann, Steve; Kuo, Chao-lin; Kurita, Nadine; Kusaka, Akito; Lahteenmaki, Anne; Lawrence, Charles R.; Lee, Adrian T.; Lewis, Antony; Li, Dale; Linder, Eric; Loverde, Marilena; Lowitz, Amy; Madhavacheril, Mathew S.; Mantz, Adam; Matsuda, Frederick; Mauskopf, Philip; McMahon, Jeff; McQuinn, Matthew; Meerburg, P. Daniel; Melin, Jean-Baptiste; Meyers, Joel; Millea, Marius; Mohr, Joseph; Moncelsi, Lorenzo; Mroczkowski, Tony; Mukherjee, Suvodip; Münchmeyer, Moritz; Nagai, Daisuke; Nagy, Johanna; Namikawa, Toshiya; Nati, Federico; Natoli, Tyler; Negrello, Mattia; Newburgh, Laura; Niemack, Michael D.; Nishino, Haruki; Nordby, Martin; Novosad, Valentine; O'Connor, Paul; Obied, Georges; Padin, Stephen; Pandey, Shivam; Partridge, Bruce; Pierpaoli, Elena; Pogosian, Levon; Pryke, Clement; Puglisi, Giuseppe; Racine, Benjamin; Raghunathan, Srinivasan; Rahlin, Alexandra; Rajagopalan, Srini; Raveri, Marco; Reichanadter, Mark; Reichardt, Christian L.; Remazeilles, Mathieu; Rocha, Graca; Roe, Natalie A.; Roy, Anirban; Ruhl, John; Salatino, Maria; Saliwanchik, Benjamin; Schaan, Emmanuel; Schillaci, Alessandro; Schmittfull, Marcel M.; Scott, Douglas; Sehgal, Neelima; Shandera, Sarah; Sheehy, Christopher; Sherwin, Blake D.; Shirokoff, Erik; Simon, Sara M.; Slosar, Anze; Somerville, Rachel; Spergel, David; Staggs, Suzanne T.; Stark, Antony; Stompor, Radek; Story, Kyle T.; Stoughton, Chris; Suzuki, Aritoki; Tajima, Osamu; Teply, Grant P.; Thompson, Keith; Timbie, Peter; Tomasi, Maurizio; Treu, Jesse I.; Tristram, Matthieu; Tucker, Gregory; Umiltà, Caterina; van Engelen, Alexander; Vieira, Joaquin D.; Vieregg, Abigail G.; Vogelsberger, Mark; Wang, Gensheng; Watson, Scott; White, Martin; Whitehorn, Nathan; Wollack, Edward J.; Wu, W. L. Kimmy; Xu, Zhilei; Yasini, Siavash; Yeck, James; Yoon, Ki Won; Young, Edward; Zonca, Andrea
Comments: 287 pages, 82 figures
Submitted: 2019-07-09
We present the science case, reference design, and project plan for the Stage-4 ground-based cosmic microwave background experiment CMB-S4.
[6]  oai:arXiv.org:1906.10134  [pdf] - 1908746
CMB-HD: An Ultra-Deep, High-Resolution Millimeter-Wave Survey Over Half the Sky
Comments: APC White Paper for the Astro2020 Decadal, with updated proposing team
Submitted: 2019-06-24, last modified: 2019-06-30
A millimeter-wave survey over half the sky, that spans frequencies in the range of 30 to 350 GHz, and that is both an order of magnitude deeper and of higher-resolution than currently funded surveys would yield an enormous gain in understanding of both fundamental physics and astrophysics. By providing such a deep, high-resolution millimeter-wave survey (about 0.5 uK-arcmin noise and 15 arcsecond resolution at 150 GHz), CMB-HD will enable major advances. It will allow 1) the use of gravitational lensing of the primordial microwave background to map the distribution of matter on small scales (k~10/hMpc), which probes dark matter particle properties. It will also allow 2) measurements of the thermal and kinetic Sunyaev-Zel'dovich effects on small scales to map the gas density and gas pressure profiles of halos over a wide field, which probes galaxy evolution and cluster astrophysics. In addition, CMB-HD would allow us to cross critical thresholds in fundamental physics: 3) ruling out or detecting any new, light (< 0.1eV), thermal particles, which could potentially be the dark matter, and 4) testing a wide class of multi-field models that could explain an epoch of inflation in the early Universe. Such a survey would also 5) monitor the transient sky by mapping the full observing region every few days, which opens a new window on gamma-ray bursts, novae, fast radio bursts, and variable active galactic nuclei. Moreover, CMB-HD would 6) provide a census of planets, dwarf planets, and asteroids in the outer Solar System, and 7) enable the detection of exo-Oort clouds around other solar systems, shedding light on planet formation. CMB-HD will deliver this survey in 5 years of observing half the sky, using two new 30-meter-class off-axis cross-Dragone telescopes to be located at Cerro Toco in the Atacama Desert. The telescopes will field about 2.4 million detectors (600,000 pixels) in total.
[7]  oai:arXiv.org:1808.07445  [pdf] - 1841339
The Simons Observatory: Science goals and forecasts
The Simons Observatory Collaboration; Ade, Peter; Aguirre, James; Ahmed, Zeeshan; Aiola, Simone; Ali, Aamir; Alonso, David; Alvarez, Marcelo A.; Arnold, Kam; Ashton, Peter; Austermann, Jason; Awan, Humna; Baccigalupi, Carlo; Baildon, Taylor; Barron, Darcy; Battaglia, Nick; Battye, Richard; Baxter, Eric; Bazarko, Andrew; Beall, James A.; Bean, Rachel; Beck, Dominic; Beckman, Shawn; Beringue, Benjamin; Bianchini, Federico; Boada, Steven; Boettger, David; Bond, J. Richard; Borrill, Julian; Brown, Michael L.; Bruno, Sarah Marie; Bryan, Sean; Calabrese, Erminia; Calafut, Victoria; Calisse, Paolo; Carron, Julien; Challinor, Anthony; Chesmore, Grace; Chinone, Yuji; Chluba, Jens; Cho, Hsiao-Mei Sherry; Choi, Steve; Coppi, Gabriele; Cothard, Nicholas F.; Coughlin, Kevin; Crichton, Devin; Crowley, Kevin D.; Crowley, Kevin T.; Cukierman, Ari; D'Ewart, John M.; Dünner, Rolando; de Haan, Tijmen; Devlin, Mark; Dicker, Simon; Didier, Joy; Dobbs, Matt; Dober, Bradley; Duell, Cody J.; Duff, Shannon; Duivenvoorden, Adri; Dunkley, Jo; Dusatko, John; Errard, Josquin; Fabbian, Giulio; Feeney, Stephen; Ferraro, Simone; Fluxà, Pedro; Freese, Katherine; Frisch, Josef C.; Frolov, Andrei; Fuller, George; Fuzia, Brittany; Galitzki, Nicholas; Gallardo, Patricio A.; Ghersi, Jose Tomas Galvez; Gao, Jiansong; Gawiser, Eric; Gerbino, Martina; Gluscevic, Vera; Goeckner-Wald, Neil; Golec, Joseph; Gordon, Sam; Gralla, Megan; Green, Daniel; Grigorian, Arpi; Groh, John; Groppi, Chris; Guan, Yilun; Gudmundsson, Jon E.; Han, Dongwon; Hargrave, Peter; Hasegawa, Masaya; Hasselfield, Matthew; Hattori, Makoto; Haynes, Victor; Hazumi, Masashi; He, Yizhou; Healy, Erin; Henderson, Shawn W.; Hervias-Caimapo, Carlos; Hill, Charles A.; Hill, J. Colin; Hilton, Gene; Hilton, Matt; Hincks, Adam D.; Hinshaw, Gary; Hložek, Renée; Ho, Shirley; Ho, Shuay-Pwu Patty; Howe, Logan; Huang, Zhiqi; Hubmayr, Johannes; Huffenberger, Kevin; Hughes, John P.; Ijjas, Anna; Ikape, Margaret; Irwin, Kent; Jaffe, Andrew H.; Jain, Bhuvnesh; Jeong, Oliver; Kaneko, Daisuke; Karpel, Ethan D.; Katayama, Nobuhiko; Keating, Brian; Kernasovskiy, Sarah S.; Keskitalo, Reijo; Kisner, Theodore; Kiuchi, Kenji; Klein, Jeff; Knowles, Kenda; Koopman, Brian; Kosowsky, Arthur; Krachmalnicoff, Nicoletta; Kuenstner, Stephen E.; Kuo, Chao-Lin; Kusaka, Akito; Lashner, Jacob; Lee, Adrian; Lee, Eunseong; Leon, David; Leung, Jason S. -Y.; Lewis, Antony; Li, Yaqiong; Li, Zack; Limon, Michele; Linder, Eric; Lopez-Caraballo, Carlos; Louis, Thibaut; Lowry, Lindsay; Lungu, Marius; Madhavacheril, Mathew; Mak, Daisy; Maldonado, Felipe; Mani, Hamdi; Mates, Ben; Matsuda, Frederick; Maurin, Loïc; Mauskopf, Phil; May, Andrew; McCallum, Nialh; McKenney, Chris; McMahon, Jeff; Meerburg, P. Daniel; Meyers, Joel; Miller, Amber; Mirmelstein, Mark; Moodley, Kavilan; Munchmeyer, Moritz; Munson, Charles; Naess, Sigurd; Nati, Federico; Navaroli, Martin; Newburgh, Laura; Nguyen, Ho Nam; Niemack, Michael; Nishino, Haruki; Orlowski-Scherer, John; Page, Lyman; Partridge, Bruce; Peloton, Julien; Perrotta, Francesca; Piccirillo, Lucio; Pisano, Giampaolo; Poletti, Davide; Puddu, Roberto; Puglisi, Giuseppe; Raum, Chris; Reichardt, Christian L.; Remazeilles, Mathieu; Rephaeli, Yoel; Riechers, Dominik; Rojas, Felipe; Roy, Anirban; Sadeh, Sharon; Sakurai, Yuki; Salatino, Maria; Rao, Mayuri Sathyanarayana; Schaan, Emmanuel; Schmittfull, Marcel; Sehgal, Neelima; Seibert, Joseph; Seljak, Uros; Sherwin, Blake; Shimon, Meir; Sierra, Carlos; Sievers, Jonathan; Sikhosana, Precious; Silva-Feaver, Maximiliano; Simon, Sara M.; Sinclair, Adrian; Siritanasak, Praween; Smith, Kendrick; Smith, Stephen R.; Spergel, David; Staggs, Suzanne T.; Stein, George; Stevens, Jason R.; Stompor, Radek; Suzuki, Aritoki; Tajima, Osamu; Takakura, Satoru; Teply, Grant; Thomas, Daniel B.; Thorne, Ben; Thornton, Robert; Trac, Hy; Tsai, Calvin; Tucker, Carole; Ullom, Joel; Vagnozzi, Sunny; van Engelen, Alexander; Van Lanen, Jeff; Van Winkle, Daniel D.; Vavagiakis, Eve M.; Vergès, Clara; Vissers, Michael; Wagoner, Kasey; Walker, Samantha; Ward, Jon; Westbrook, Ben; Whitehorn, Nathan; Williams, Jason; Williams, Joel; Wollack, Edward J.; Xu, Zhilei; Yu, Byeonghee; Yu, Cyndia; Zago, Fernando; Zhang, Hezi; Zhu, Ningfeng
Comments: This paper presents an overview of the Simons Observatory science goals, details about the instrument will be presented in a companion paper. The author contribution to this paper is available at https://simonsobservatory.org/publications.php (Abstract abridged) -- matching version published in JCAP
Submitted: 2018-08-22, last modified: 2019-03-01
The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands: 27, 39, 93, 145, 225 and 280 GHz. The initial configuration of SO will have three small-aperture 0.5-m telescopes (SATs) and one large-aperture 6-m telescope (LAT), with a total of 60,000 cryogenic bolometers. Our key science goals are to characterize the primordial perturbations, measure the number of relativistic species and the mass of neutrinos, test for deviations from a cosmological constant, improve our understanding of galaxy evolution, and constrain the duration of reionization. The SATs will target the largest angular scales observable from Chile, mapping ~10% of the sky to a white noise level of 2 $\mu$K-arcmin in combined 93 and 145 GHz bands, to measure the primordial tensor-to-scalar ratio, $r$, at a target level of $\sigma(r)=0.003$. The LAT will map ~40% of the sky at arcminute angular resolution to an expected white noise level of 6 $\mu$K-arcmin in combined 93 and 145 GHz bands, overlapping with the majority of the LSST sky region and partially with DESI. With up to an order of magnitude lower polarization noise than maps from the Planck satellite, the high-resolution sky maps will constrain cosmological parameters derived from the damping tail, gravitational lensing of the microwave background, the primordial bispectrum, and the thermal and kinematic Sunyaev-Zel'dovich effects, and will aid in delensing the large-angle polarization signal to measure the tensor-to-scalar ratio. The survey will also provide a legacy catalog of 16,000 galaxy clusters and more than 20,000 extragalactic sources.
[8]  oai:arXiv.org:1810.04633  [pdf] - 1764498
Development of Calibration Strategies for the Simons Observatory
Comments: 13 pages, 4 figures, SPIE Astronomical Telescopes and Instrumentation 2018
Submitted: 2018-10-10
The Simons Observatory (SO) is a set of cosmic microwave background instruments that will be deployed in the Atacama Desert in Chile. The key science goals include setting new constraints on cosmic inflation, measuring large scale structure with gravitational lensing, and constraining neutrino masses. Meeting these science goals with SO requires high sensitivity and improved calibration techniques. In this paper, we highlight a few of the most important instrument calibrations, including spectral response, gain stability, and polarization angle calibrations. We present their requirements for SO and experimental techniques that can be employed to reach those requirements.
[9]  oai:arXiv.org:1808.07442  [pdf] - 1737618
Studies of Systematic Uncertainties for Simons Observatory: Polarization Modulator Related Effects
Comments: 22 pages, 10 figures. Submitted to the Proceedings of SPIE: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX
Submitted: 2018-08-22
The Simons Observatory (SO) will observe the temperature and polarization anisotropies of the cosmic microwave background (CMB) over a wide range of frequencies (27 to 270 GHz) and angular scales by using both small (0.5 m) and large (6 m) aperture telescopes. The SO small aperture telescopes will target degree angular scales where the primordial B-mode polarization signal is expected to peak. The incoming polarization signal of the small aperture telescopes will be modulated by a cryogenic, continuously-rotating half-wave plate (CRHWP) to mitigate systematic effects arising from slowly varying noise and detector pair-differencing. In this paper, we present an assessment of some systematic effects arising from using a CRHWP in the SO small aperture systems. We focus on systematic effects associated with structural properties of the HWP and effects arising when operating a HWP, including the amplitude of the HWP synchronous signal (HWPSS), and I -> P (intensity to polarization) leakage that arises from detector non-linearity in the presence of a large HWPSS. We demonstrate our ability to simulate the impact of the aforementioned systematic effects in the time domain. This important step will inform mitigation strategies and design decisions to ensure that SO will meet its science goals.
[10]  oai:arXiv.org:1808.05152  [pdf] - 1733920
Studies of Systematic Uncertainties for Simons Observatory: Optical Effects and Sensitivity Considerations
Comments: Poster presented at SPIE Astronomical Telescopes and Instrumentation 2018
Submitted: 2018-08-15
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work is part of a series of papers studying calibration, sensitivity, and systematic errors for SO. In this paper, we discuss current efforts to model optical systematic effects, how these have been used to guide the design of the SO instrument, and how these studies can be used to inform instrument design of future experiments like CMB-S4. While optical systematics studies are underway for both the small aperture and large aperture telescopes, we limit the focus of this paper to the more mature large aperture telescope design for which our studies include: pointing errors, optical distortions, beam ellipticity, cross-polar response, instrumental polarization rotation and various forms of sidelobe pickup.
[11]  oai:arXiv.org:1808.04493  [pdf] - 1935462
The Simons Observatory: Instrument Overview
Comments:
Submitted: 2018-08-13
The Simons Observatory (SO) will make precise temperature and polarization measurements of the cosmic microwave background (CMB) using a set of telescopes which will cover angular scales between 1 arcminute and tens of degrees, contain over 60,000 detectors, and observe at frequencies between 27 and 270 GHz. SO will consist of a 6 m aperture telescope coupled to over 30,000 transition-edge sensor bolometers along with three 42 cm aperture refractive telescopes, coupled to an additional 30,000+ detectors, all of which will be located in the Atacama Desert at an altitude of 5190 m. The powerful combination of large and small apertures in a CMB observatory will allow us to sample a wide range of angular scales over a common survey area. SO will measure fundamental cosmological parameters of our universe, constrain primordial fluctuations, find high redshift clusters via the Sunyaev-Zel`dovich effect, constrain properties of neutrinos, and trace the density and velocity of the matter in the universe over cosmic time. The complex set of technical and science requirements for this experiment has led to innovative instrumentation solutions which we will discuss. The large aperture telescope will couple to a cryogenic receiver that is 2.4 m in diameter and nearly 3 m long, creating a number of technical challenges. Concurrently, we are designing the array of cryogenic receivers housing the 42 cm aperture telescopes. We will discuss the sensor technology SO will use and we will give an overview of the drivers for and designs of the SO telescopes and receivers, with their cold optical components and detector arrays.
[12]  oai:arXiv.org:1711.02523  [pdf] - 1723973
Development of Multi-Chroic MKIDs for Next-Generation CMB Polarization Studies
Comments: LTD-17 paper accepted by Journal of Low Temperature Physics
Submitted: 2017-11-07, last modified: 2018-07-29
We report on the status of an ongoing effort to develop arrays of horn-coupled, polarization-sensitive microwave kinetic inductance detectors (MKIDs) that are each sensitive to two spectral bands between 125 and 280 GHz. These multi-chroic MKID arrays are tailored for next-generation, large-detector-count experiments that are being designed to simultaneously characterize the polarization properties of both the cosmic microwave background (CMB) and Galactic dust emission. We present our device design and describe laboratory-based measurement results from two 23-element prototype arrays. From dark measurements of our first engineering array we demonstrated a multiplexing factor of 92, showed the resonators respond to bath temperature changes as expected, and found that the fabrication yield was 100%. From our first optically loaded array we found the MKIDs respond to millimeter-wave pulses, additional optical characterization measurements are ongoing. We end by discussing our plans for scaling up this technology to kilo-pixel arrays over the next two years.
[13]  oai:arXiv.org:1807.05215  [pdf] - 1719070
BFORE: A CMB Balloon Payload to Measure Reionization, Neutrino Mass, and Cosmic Inflation
Comments: 11 pages, 2 figures, Submitted to SPIE Astronomical Telescopes and Instrumentation
Submitted: 2018-07-13
BFORE is a high-altitude ultra-long-duration balloon mission to map the cosmic microwave background (CMB). During a 28-day mid-latitude flight launched from Wanaka, New Zealand, the instrument will map half the sky to improve measurements of the optical depth to reionization tau. This will break parameter degeneracies needed to detect neutrino mass. BFORE will also hunt for the gravitational wave B-mode signal, and map Galactic dust foregrounds. The mission will be the first near-space use of TES/mSQUID multichroic detectors (150/217 GHz and 280/353 GHz bands) with low-power readout electronics.
[14]  oai:arXiv.org:1807.00097  [pdf] - 1938290
Optical Design of the TolTEC Millimeter-wave Camera
Comments: 8 pages, 2 figures, presented at SPIE Astronomical Telescopes and Instrumentation 2018
Submitted: 2018-06-29
TolTEC is a new camera being built for the 50-meter Large Millimeter-wave Telescope (LMT) in Puebla, Mexico to survey distant galaxies and star-forming regions in the Milky Way. The optical design simultaneously couples the field of view onto focal planes at 150, 220, and 280 GHz. The optical design and detector properties, as well as a data-driven model of the atmospheric emission of the LMT site, inform the sensitivity model of the integrated instrument. This model is used to optimize the instrument design, and to calculate the mapping speed as an early forecast of the science reach of the instrument.
[15]  oai:arXiv.org:1806.04316  [pdf] - 1737925
BoloCalc: a sensitivity calculator for the design of Simons Observatory
Comments: Submitted to the Proceedings of SPIE: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX
Submitted: 2018-06-11
The Simons Observatory (SO) is an upcoming experiment that will study temperature and polarization fluctuations in the cosmic microwave background (CMB) from the Atacama Desert in Chile. SO will field both a large aperture telescope (LAT) and an array of small aperture telescopes (SATs) that will observe in six bands with center frequencies spanning from 27 to 270~GHz. Key considerations during the SO design phase are vast, including the number of cameras per telescope, focal plane magnification and pixel density, in-band optical power and camera throughput, detector parameter tolerances, and scan strategy optimization. To inform the SO design in a rapid, organized, and traceable manner, we have created a Python-based sensitivity calculator with several state-of-the-art features, including detector-to-detector optical white-noise correlations, a handling of simulated and measured bandpasses, and propagation of low-level parameter uncertainties to uncertainty in on-sky noise performance. We discuss the mathematics of the sensitivity calculation, the calculator's object-oriented structure and key features, how it has informed the design of SO, and how it can enhance instrument design in the broader CMB community, particularly for CMB-S4.
[16]  oai:arXiv.org:1803.03280  [pdf] - 1698088
Millimeter-Wave Polarimeters Using Kinetic Inductance Detectors for TolTEC and Beyond
Comments: 7 pages, 4 figures, 1 table. Submitted to Journal of Low Temperature Physics
Submitted: 2018-03-08
Microwave Kinetic Inductance Detectors (MKIDs) provide a compelling path forward to the large-format polarimeter, imaging, and spectrometer arrays needed for next-generation experiments in millimeter-wave cosmology and astronomy. We describe the development of feedhorn-coupled MKID detectors for the TolTEC millimeter-wave imaging polarimeter being constructed for the 50-meter Large Millimeter Telescope (LMT). Observations with TolTEC are planned to begin in early 2019. TolTEC will comprise $\sim$7,000 polarization sensitive MKIDs and will represent the first MKID arrays fabricated and deployed on monolithic 150 mm diameter silicon wafers -- a critical step towards future large-scale experiments with over $10^5$ detectors. TolTEC will operate in observational bands at 1.1, 1.4, and 2.0 mm and will use dichroic filters to define a physically independent focal plane for each passband, thus allowing the polarimeters to use simple, direct-absorption inductive structures that are impedance matched to incident radiation. This work is part of a larger program at NIST-Boulder to develop MKID-based detector technologies for use over a wide range of photon energies spanning millimeter-waves to X-rays. We present the detailed pixel layout and describe the methods, tools, and flexible design parameters that allow this solution to be optimized for use anywhere in the millimeter and sub-millimeter bands. We also present measurements of prototype devices operating in the 1.1 mm band and compare the observed optical performance to that predicted from models and simulations.
[17]  oai:arXiv.org:1710.04326  [pdf] - 1604980
Microwave SQUID Multiplexer demonstration for Cosmic Microwave Background Imagers
Comments: 6 pages, 4 figures
Submitted: 2017-10-11, last modified: 2017-12-15
Key performance characteristics are demonstrated for the microwave SQUID multiplexer ($\mu$MUX) coupled to transition edge sensor (TES) bolometers that have been optimized for cosmic microwave background (CMB) observations. In a 64-channel demonstration, we show that the $\mu$MUX produces a white, input referred current noise level of 29~pA$/\sqrt{\mathrm{Hz}}$ at -77~dB microwave probe tone power, which is well below expected fundamental detector and photon noise sources for a ground-based CMB-optimized bolometer. Operated with negligible photon loading, we measure 98~pA$/\sqrt{\mathrm{Hz}}$ in the TES-coupled channels biased at 65% of the sensor normal resistance. This noise level is consistent with that predicted from bolometer thermal fluctuation (i.e., phonon) noise. Furthermore, the power spectral density exhibits a white spectrum at low frequencies ($\sim$~100~mHz), which enables CMB mapping on large angular scales that constrain the physics of inflation. Additionally, we report cross-talk measurements that indicate a level below 0.3%, which is less than the level of cross-talk from multiplexed readout systems in deployed CMB imagers. These measurements demonstrate the $\mu$MUX as a viable readout technique for future CMB imaging instruments.
[18]  oai:arXiv.org:1711.10596  [pdf] - 1783704
SPIDER: CMB polarimetry from the edge of space
Comments: 10 pages, 7 figures, LTD17 Conference
Submitted: 2017-11-28
SPIDER is a balloon-borne instrument designed to map the polarization of the millimeter-wave sky at large angular scales. SPIDER targets the B-mode signature of primordial gravitational waves in the cosmic microwave background (CMB), with a focus on mapping a large sky area with high fidelity at multiple frequencies. SPIDER's first longduration balloon (LDB) flight in January 2015 deployed a total of 2400 antenna-coupled Transition Edge Sensors (TESs) at 90 GHz and 150 GHz. In this work we review the design and in-flight performance of the SPIDER instrument, with a particular focus on the measured performance of the detectors and instrument in a space-like loading and radiation environment. SPIDER's second flight in December 2018 will incorporate payload upgrades and new receivers to map the sky at 285 GHz, providing valuable information for cleaning polarized dust emission from CMB maps.
[19]  oai:arXiv.org:1711.04169  [pdf] - 1755845
280 GHz Focal Plane Unit Design and Characterization for the SPIDER-2 Suborbital Polarimeter
Comments:
Submitted: 2017-11-11, last modified: 2017-11-22
We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mode contamination in the CMB from Galactic dust emission. Each 280 GHz focal plane contains a 16 x 16 grid of corrugated silicon feedhorns coupled to an array of aluminum-manganese transition-edge sensor (TES) bolometers fabricated on 150 mm diameter substrates. In total, the three 280 GHz FPUs contain 1,530 polarization sensitive bolometers (765 spatial pixels) optimized for the low loading environment in flight and read out by time-division SQUID multiplexing. In this paper we describe the mechanical, thermal, and magnetic shielding architecture of the focal planes and present cryogenic measurements which characterize yield and the uniformity of several bolometer parameters. The assembled FPUs have high yields, with one array as high as 95% including defects from wiring and readout. We demonstrate high uniformity in device parameters, finding the median saturation power for each TES array to be ~3 pW at 300 mK with a less than 6% variation across each array at one standard deviation. These focal planes will be deployed alongside the 95 and 150 GHz telescopes in the SPIDER-2 instrument, slated to fly from McMurdo Station in Antarctica in December 2018.
[20]  oai:arXiv.org:1710.02239  [pdf] - 1641296
Design and performance of dual-polarization lumped-element kinetic inductance detectors for millimeter-wave polarimetry
Comments: Accepted in Astronomy & Astrophysics, revised version. 11 pages, 8 figures
Submitted: 2017-10-05, last modified: 2017-11-19
Lumped-element kinetic inductance detectors (LEKIDs) are an attractive technology for millimeter-wave observations that require large arrays of extremely low-noise detectors. We designed, fabricated and characterized 64-element (128 LEKID) arrays of horn-coupled, dual-polarization LEKIDs optimized for ground-based CMB polarimetry. Our devices are sensitive to two orthogonal polarizations in a single spectral band centered on 150 GHz with $\Delta\nu/\nu=0.2$. The $65\times 65$ mm square arrays are designed to be tiled into the focal plane of an optical system. We demonstrate the viability of these dual-polarization LEKIDs with laboratory measurements. The LEKID modules are tested with an FPGA-based readout system in a sub-kelvin cryostat that uses a two-stage adiabatic demagnetization refrigerator. The devices are characterized using a blackbody and a millimeter-wave source. The polarization properties are measured with a cryogenic stepped half-wave plate. We measure the resonator parameters and the detector sensitivity, noise spectrum, dynamic range, and polarization response. The resonators have internal quality factors approaching $1\times 10^{6}$. The detectors have uniform response between orthogonal polarizations and a large dynamic range. The detectors are photon-noise limited above 1 pW of absorbed power. The noise-equivalent temperatures under a 3.4 K blackbody load are $<100~\mu\mathrm{K\sqrt{s}}$. The polarization fractions of detectors sensitive to orthogonal polarizations are >80%. The entire array is multiplexed on a single readout line, demonstrating a multiplexing factor of 128. The array and readout meet the requirements for 4 arrays to be read out simultaneously for a multiplexing factor of 512. This laboratory study demonstrates the first dual-polarization LEKID array optimized for CMB polarimetry and shows the readiness of the detectors for on-sky observations.
[21]  oai:arXiv.org:1704.00215  [pdf] - 1582291
A New Limit on CMB Circular Polarization from SPIDER
Comments: 9 pages, 4 figures, 5 tables - Updated to version accepted for publication in ApJ, modified acknowledgements
Submitted: 2017-04-01, last modified: 2017-08-11
We present a new upper limit on CMB circular polarization from the 2015 flight of SPIDER, a balloon-borne telescope designed to search for $B$-mode linear polarization from cosmic inflation. Although the level of circular polarization in the CMB is predicted to be very small, experimental limits provide a valuable test of the underlying models. By exploiting the non-zero circular-to-linear polarization coupling of the HWP polarization modulators, data from SPIDER's 2015 Antarctic flight provide a constraint on Stokes $V$ at 95 and 150 GHz from $33<\ell<307$. No other limits exist over this full range of angular scales, and SPIDER improves upon the previous limit by several orders of magnitude, providing 95% C.L. constraints on $\ell (\ell+1)C_{\ell}^{VV}/(2\pi)$ ranging from 141 $\mu K ^2$ to 255 $\mu K ^2$ at 150 GHz for a thermal CMB spectrum. As linear CMB polarization experiments become increasingly sensitive, the techniques described in this paper can be applied to obtain even stronger constraints on circular polarization.
[22]  oai:arXiv.org:1706.02464  [pdf] - 1584411
CMB-S4 Technology Book, First Edition
Comments: 191 pages
Submitted: 2017-06-08, last modified: 2017-07-05
CMB-S4 is a proposed experiment to map the polarization of the Cosmic Microwave Background (CMB) to nearly the cosmic variance limit for angular scales that are accessible from the ground. The science goals and capabilities of CMB-S4 in illuminating cosmic inflation, measuring the sum of neutrino masses, searching for relativistic relics in the early universe, characterizing dark energy and dark matter, and mapping the matter distribution in the universe have been described in the CMB-S4 Science Book. This Technology Book is a companion volume to the Science Book. The ambitious science goals of CMB-S4, a "Stage-4" experiment, require a step forward in experimental capability from the current Stage=II experiments. To guide this process, we summarize the current state of CMB instrumentation technology, and identify R&D efforts necessary to advance it for use in CMB-S4. The book focuses on technical challenges in four broad areas: Telescope Design; Receiver Optics; Focal-Plane Optical Coupling; and Focal-Plane Sensor and Readout.
[23]  oai:arXiv.org:1707.01488  [pdf] - 1732527
Measuring Reionization, Neutrino Mass, and Cosmic Inflation with BFORE
Comments: 8 pages, 4 figures, to appear in Proceedings of Low Temperature Detectors 17
Submitted: 2017-07-05
BFORE is a NASA high-altitude ultra-long-duration balloon mission proposed to measure the cosmic microwave background (CMB) across half the sky during a 28-day mid-latitude flight launched from Wanaka, New Zealand. With the unique access to large angular scales and high frequencies provided by the balloon platform, BFORE will significantly improve measurements of the optical depth to reionization tau, breaking parameter degeneracies needed for a measurement of neutrino mass with the CMB. The large angular scale data will enable BFORE to hunt for the large-scale gravitational wave B-mode signal, as well as the degree-scale signal, each at the r~0.01 level. The balloon platform allows BFORE to map Galactic dust foregrounds at frequencies where they dominate, in order to robustly separate them from CMB signals measured by BFORE, in addition to complementing data from ground-based telescopes. The combination of frequencies will also lead to velocity measurements for thousands of galaxy clusters, as well as probing how star-forming galaxies populate dark matter halos. The mission will be the first near-space use of TES multichroic detectors (150/217 GHz and 280/353 GHz bands) using highly-multiplexed mSQUID microwave readout, raising the technical readiness level of both technologies.
[24]  oai:arXiv.org:1701.08461  [pdf] - 1581309
High quality factor manganese-doped aluminum lumped-element kinetic inductance detectors sensitive to frequencies below 100 GHz
Comments: 5 pages, 4 figures. This revised version has been accepted for publication by Appl. Phys. Lett
Submitted: 2017-01-29, last modified: 2017-04-15
Aluminum lumped-element kinetic inductance detectors (LEKIDs) sensitive to millimeter-wave photons have been shown to exhibit high quality factors, making them highly sensitive and multiplexable. The superconducting gap of aluminum limits aluminum LEKIDs to photon frequencies above 100 GHz. Manganese-doped aluminum (Al-Mn) has a tunable critical temperature and could therefore be an attractive material for LEKIDs sensitive to frequencies below 100 GHz if the internal quality factor remains sufficiently high when manganese is added to the film. To investigate, we measured some of the key properties of Al-Mn LEKIDs. A prototype eight-element LEKID array was fabricated using a 40 nm thick film of Al-Mn deposited on a 500 {\mu}m thick high-resistivity, float-zone silicon substrate. The manganese content was 900 ppm, the measured $T_c = 694\pm1$ mK, and the resonance frequencies were near 150 MHz. Using measurements of the forward scattering parameter $S_{21}$ at various bath temperatures between 65 and 250 mK, we determined that the Al-Mn LEKIDs we fabricated have internal quality factors greater than $2 \times 10^5$, which is high enough for millimeter-wave astrophysical observations. In the dark conditions under which these devices were measured, the fractional frequency noise spectrum shows a shallow slope that depends on bath temperature and probe tone amplitude, which could be two-level system noise. The anticipated white photon noise should dominate this level of low-frequency noise when the detectors are illuminated with millimeter-waves in future measurements. The LEKIDs responded to light pulses from a 1550 nm light-emitting diode, and we used these light pulses to determine that the quasiparticle lifetime is 60 {\mu}s.
[25]  oai:arXiv.org:1611.05400  [pdf] - 1560203
An Open Source, FPGA-based LeKID readout for BLAST-TNG: Pre-flight Results
Comments:
Submitted: 2016-11-16
We present a highly frequency multiplexed readout for large-format superconducting detector arrays intended for use in the next generation of balloon-borne and space-based sub-millimeter and far-infrared missions. We will demonstrate this technology on the upcoming NASA Next Generation Balloon-borne Large Aperture Sub-millimeter Telescope (BLAST-TNG) to measure the polarized emission of Galactic dust at wavelengths of 250, 350 and 500 microns. The BLAST-TNG receiver incorporates the first arrays of Lumped Element Kinetic Inductance Detectors (LeKID) along with the first microwave multiplexing readout electronics to fly in a space-like environment and will significantly advance the TRL for these technologies. After the flight of BLAST-TNG, we will continue to improve the performance of the detectors and readout electronics for the next generation of balloon-borne instruments and for use in a future FIR Surveyor.
[26]  oai:arXiv.org:1609.06352  [pdf] - 1492815
Magnetic field dependence of the internal quality factor and noise performance of lumped-element kinetic inductance detectors
Comments: 5 pages, 4 figures
Submitted: 2016-09-20
We present a technique for increasing the internal quality factor of kinetic inductance detectors (KIDs) by nulling ambient magnetic fields with a properly applied magnetic field. The KIDs used in this study are made from thin-film aluminum, they are mounted inside a light-tight package made from bulk aluminum, and they are operated near $150 \, \mathrm{mK}$. Since the thin-film aluminum has a slightly elevated critical temperature ($T_\mathrm{c} = 1.4 \, \mathrm{K}$), it therefore transitions before the package ($T_\mathrm{c} = 1.2 \, \mathrm{K}$), which also serves as a magnetic shield. On cooldown, ambient magnetic fields as small as approximately $30 \, \mathrm{\mu T}$ can produce vortices in the thin-film aluminum as it transitions because the bulk aluminum package has not yet transitioned and therefore is not yet shielding. These vortices become trapped inside the aluminum package below $1.2 \, \mathrm{K}$ and ultimately produce low internal quality factors in the thin-film superconducting resonators. We show that by controlling the strength of the magnetic field present when the thin film transitions, we can control the internal quality factor of the resonators. We also compare the noise performance with and without vortices present, and find no evidence for excess noise beyond the increase in amplifier noise, which is expected with increasing loss.
[27]  oai:arXiv.org:1607.03796  [pdf] - 1441570
Polarization Sensitive Multi-Chroic MKIDs
Comments: To appear in the Proc. SPIE
Submitted: 2016-07-13
We report on the development of scalable prototype microwave kinetic inductance detector (MKID) arrays tailored for future multi-kilo-pixel experiments that are designed to simultaneously characterize the polarization properties of both the cosmic microwave background (CMB) and Galactic dust emission. These modular arrays are composed of horn-coupled, polarization-sensitive MKIDs, and each pixel has four detectors: two polarizations in two spectral bands between 125 and 280 GHz. A horn is used to feed each array element, and a planar orthomode transducer, composed of two waveguide probe pairs, separates the incoming light into two linear polarizations. Diplexers composed of resonant-stub band-pass filters separate the radiation into 125 to 170 GHz and 190 to 280 GHz pass bands. The millimeter-wave power is ultimately coupled to a hybrid co-planar waveguide microwave kinetic inductance detector using a novel, broadband circuit developed by our collaboration. Electromagnetic simulations show the expected absorption efficiency of the detector is approximately 90%. Array fabrication will begin in the summer of 2016.
[28]  oai:arXiv.org:1607.03448  [pdf] - 1531012
Development of dual-polarization LEKIDs for CMB observations
Comments: 7 pages, 5 figures, Proc. SPIE Astronomical Telescopes + Instrumentation 2016, Paper 9914-24
Submitted: 2016-07-12
We discuss the design considerations and initial measurements from arrays of dual-polarization, lumped element kinetic inductance detectors (LEKIDs) nominally designed for cosmic microwave background (CMB) studies. The detectors are horn-coupled, and each array element contains two single-polarization LEKIDs, which are made from thin-film aluminum and optimized for a single spectral band centered on 150 GHz. We are developing two array architectures, one based on 160 micron thick silicon wafers and the other based on silicon-on-insulator (SOI) wafers with a 30 micron thick device layer. The 20-element test arrays (40 LEKIDs) are characterized with both a linearly-polarized electronic millimeter wave source and a thermal source. We present initial measurements including the noise spectra, noise-equivalent temperature, and responsivity. We discuss future testing and further design optimizations to be implemented.
[29]  oai:arXiv.org:1606.09396  [pdf] - 1530923
Design of 280 GHz feedhorn-coupled TES arrays for the balloon-borne polarimeter SPIDER
Comments: Proceedings of SPIE Astronomical Telescopes + Instrumentation 2016
Submitted: 2016-06-30, last modified: 2016-07-07
We describe 280 GHz bolometric detector arrays that instrument the balloon-borne polarimeter SPIDER. A primary science goal of SPIDER is to measure the large-scale B-mode polarization of the cosmic microwave background in search of the cosmic-inflation, gravitational-wave signature. 280 GHz channels aid this science goal by constraining the level of B-mode contamination from galactic dust emission. We present the focal plane unit design, which consists of a 16$\times$16 array of conical, corrugated feedhorns coupled to a monolithic detector array fabricated on a 150 mm diameter silicon wafer. Detector arrays are capable of polarimetric sensing via waveguide probe-coupling to a multiplexed array of transition-edge-sensor (TES) bolometers. The SPIDER receiver has three focal plane units at 280 GHz, which in total contains 765 spatial pixels and 1,530 polarization sensitive bolometers. By fabrication and measurement of single feedhorns, we demonstrate 14.7$^{\circ}$ FHWM Gaussian-shaped beams with $<$1% ellipticity in a 30% fractional bandwidth centered at 280 GHz. We present electromagnetic simulations of the detection circuit, which show 94% band-averaged, single-polarization coupling efficiency, 3% reflection and 3% radiative loss. Lastly, we demonstrate a low thermal conductance bolometer, which is well-described by a simple TES model and exhibits an electrical noise equivalent power (NEP) = 2.6 $\times$ 10$^{-17}$ W/$\sqrt{\mathrm{Hz}}$, consistent with the phonon noise prediction.
[30]  oai:arXiv.org:1510.01771  [pdf] - 1337397
A cryogenic rotation stage with a large clear aperture for the half-wave plates in the Spider instrument
Comments: 11 pages, 7 figures, Published in Review of Scientific Instruments. v2 includes reviewer changes and longer literature review
Submitted: 2015-10-06, last modified: 2016-01-08
We describe the cryogenic half-wave plate rotation mechanisms built for and used in Spider, a polarization-sensitive balloon-borne telescope array that observed the Cosmic Microwave Background at 95 GHz and 150 GHz during a stratospheric balloon flight from Antarctica in January 2015. The mechanisms operate at liquid helium temperature in flight. A three-point contact design keeps the mechanical bearings relatively small but allows for a large (305 mm) diameter clear aperture. A worm gear driven by a cryogenic stepper motor allows for precise positioning and prevents undesired rotation when the motors are depowered. A custom-built optical encoder system monitors the bearing angle to an absolute accuracy of +/- 0.1 degrees. The system performed well in Spider during its successful 16 day flight.
[31]  oai:arXiv.org:1509.05392  [pdf] - 1330249
BFORE: The B-mode Foreground Experiment
Comments: 7 pages, 4 figures, conference proceedings published in Journal of Low Temperature Physics
Submitted: 2015-09-17, last modified: 2015-12-20
The B-mode Foreground Experiment (BFORE) is a proposed NASA balloon project designed to make optimal use of the sub-orbital platform by concentrating on three dust foreground bands (270, 350, and 600 GHz) that complement ground-based cosmic microwave background (CMB) programs. BFORE will survey ~1/4 of the sky with 1.7 - 3.7 arcminute resolution, enabling precise characterization of the Galactic dust that now limits constraints on inflation from CMB B-mode polarization measurements. In addition, BFORE's combination of frequency coverage, large survey area, and angular resolution enables science far beyond the critical goal of measuring foregrounds. BFORE will constrain the velocities of thousands of galaxy clusters, provide a new window on the cosmic infrared background, and probe magnetic fields in the interstellar medium. We review the BFORE science case, timeline, and instrument design, which is based on a compact off-axis telescope coupled to >10,000 superconducting detectors.
[32]  oai:arXiv.org:1512.01847  [pdf] - 1347758
A Titanium Nitride Absorber for Controlling Optical Crosstalk in Horn-Coupled Aluminum LEKID Arrays for Millimeter Wavelengths
Comments: 7 pages, 5 figures, accepted for publication in the Journal of Low Temperature Physics
Submitted: 2015-12-06
We discuss the design and measured performance of a titanium nitride (TiN) mesh absorber we are developing for controlling optical crosstalk in horn-coupled lumped-element kinetic inductance detector arrays for millimeter-wavelengths. This absorber was added to the fused silica anti-reflection coating attached to previously-characterized, 20-element prototype arrays of LEKIDs fabricated from thin-film aluminum on silicon substrates. To test the TiN crosstalk absorber, we compared the measured response and noise properties of LEKID arrays with and without the TiN mesh. For this test, the LEKIDs were illuminated with an adjustable, incoherent electronic millimeter-wave source. Our measurements show that the optical crosstalk in the LEKID array with the TiN absorber is reduced by 66\% on average, so the approach is effective and a viable candidate for future kilo-pixel arrays.
[33]  oai:arXiv.org:1509.04658  [pdf] - 1347523
WSPEC: A waveguide filter-bank focal plane array spectrometer for millimeter wave astronomy and cosmology
Comments: 7 pages, 4 figures, submitted to Journal of Low Temperature Physics
Submitted: 2015-09-15
Imaging and spectroscopy at (sub-)millimeter wavelengths are key frontiers in astronomy and cosmology. Large area spectral surveys with moderate spectral resolution (R=50-200) will be used to characterize large scale structure and star formation through intensity mapping surveys in emission lines such as the CO rotational transitions. Such surveys will also be used to study the SZ effect, and will detect the emission lines and continuum spectrum of individual objects. WSPEC is an instrument proposed to target these science goals. It is a channelizing spectrometer realized in rectangular waveguide, fabricated using conventional high-precision metal machining. Each spectrometer is coupled to free space with a machined feed horn, and the devices are tiled into a 2D array to fill the focal plane of the telescope. The detectors will be aluminum Lumped-Element Kinetic Inductance Detectors (LEKIDs). To target the CO lines and SZ effect, we will have bands at 135-175 GHz and 190-250 GHz, each Nyquist-sampled at R~200 resolution. Here we discuss the instrument concept and design, and successful initial testing of a WR10 (i.e. 90 GHz) prototype spectrometer. We recently tested a WR5 (180 GHz) prototype to verify that the concept works at higher frequencies, and also designed a resonant backshort structure that may further increase the optical efficiency. We are making progress towards integrating a spectrometer with a LEKID array and deploying a prototype device to a telescope for first light.
[34]  oai:arXiv.org:1506.06953  [pdf] - 1275488
The Thermal Design, Characterization, and Performance of the SPIDER Long-Duration Balloon Cryostat
Comments: 15 pgs, 17 figs
Submitted: 2015-06-23, last modified: 2015-09-11
We describe the SPIDER flight cryostat, which is designed to cool six millimeter-wavelength telescopes during an Antarctic long-duration balloon flight. The cryostat, one of the largest to have flown on a stratospheric payload, uses liquid helium-4 to deliver cooling power to stages at 4.2 and 1.6 K. Stainless steel capillaries facilitate a high flow impedance connection between the main liquid helium tank and a smaller superfluid tank, allowing the latter to operate at 1.6 K as long as there is liquid in the 4.2 K main tank. Each telescope houses a closed cycle helium-3 adsorption refrigerator that further cools the focal planes down to 300 mK. Liquid helium vapor from the main tank is routed through heat exchangers that cool radiation shields, providing negative thermal feedback. The system performed successfully during a 17 day flight in the 2014-2015 Antarctic summer. The cryostat had a total hold time of 16.8 days, with 15.9 days occurring during flight.
[35]  oai:arXiv.org:1502.02735  [pdf] - 1264646
A Compact Filter-Bank Waveguide Spectrometer for Millimeter Wavelengths
Comments: 7 pages, 8 figures, accepted by IEEE Transactions on Terahertz Science and Technology
Submitted: 2015-02-09, last modified: 2015-05-13
We present the design and measurements of a 90GHz prototype of a millimeter-wave channelizing spectrometer realized in rectangular waveguide for astronomical instrumentation. The device was fabricated using conventional high-precision metal machining, and the spectrometer can be tiled into a 2D array to fill the focal plane of a telescope. Measurements of the fabricated five-channel device matched well with electromagnetic simulations using HFSS and a cascaded S-matrix approach. This motivated the design of a 54-channel R=200 spectrometer that fills the single-moded passband of rectangular waveguide in the 130-175 GHz and 190-250 GHz atmospheric windows for millimeter-wave spectroscopic mapping and multi-object spectroscopy.
[36]  oai:arXiv.org:1503.06528  [pdf] - 969448
WSPEC: A Waveguide Filter Bank Spectrometer
Comments: 3 pages, 5 figures, 26th International Symposium on Space Terahertz Technology
Submitted: 2015-03-23
We have designed, fabricated, and measured a 5-channel prototype spectrometer pixel operating in the WR10 band to demonstrate a novel moderate-resolution (R=f/{\Delta}f~100), multi-pixel, broadband, spectrometer concept for mm and submm-wave astronomy. Our design implements a transmission line filter bank using waveguide resonant cavities as a series of narrow-band filters, each coupled to an aluminum kinetic inductance detector (KID). This technology has the potential to perform the next generation of spectroscopic observations needed to drastically improve our understanding of the epoch of reionization (EoR), star formation, and large-scale structure of the universe. We present our design concept, results from measurements on our prototype device, and the latest progress on our efforts to develop a 4-pixel demonstrator instrument operating in the 130-250 GHz band.
[37]  oai:arXiv.org:1503.04684  [pdf] - 957156
Design of Dual-Polarization Horn-Coupled Kinetic Inductance Detectors for Cosmic Microwave Background Polarimetry
Comments: 3 pages, 3 figures, to appear in Proceedings of International Symposium on Space Terahertz Technology 2015
Submitted: 2015-03-16
Mapping the polarization of the Cosmic Microwave Background is yielding exciting data on the origin of the universe, the reionization of the universe, and the growth of cosmic structure. Kilopixel arrays represent the current state of the art, but advances in detector technology are needed to enable the larger detector arrays needed for future measurements. Here we present a design for single-band dual-polarization Kinetic Inductance Detectors (KIDs) at 20% bandwidths centered at 145, 220, and 280 GHz. The detection and readout system is nearly identical to the successful photon-noise-limited aluminum Lumped-Element KIDs that have been recently built and tested by some of the authors. Fabricating large focal plane arrays of the feed horns and quarter-wave backshorts requires only conventional precision machining. Since the detectors and readout lines consist only of a single patterned aluminum layer on a SOI wafer, arrays of the detectors can be built commercially or at a standard university cleanroom.
[38]  oai:arXiv.org:1407.1883  [pdf] - 1215475
Attitude determination for balloon-borne experiments
Comments: 16 pages, 10 figures, Presented at SPIE Ground-based and Airborne Telescopes V, June 23, 2014. To be published in Proceedings of SPIE Volume 9145
Submitted: 2014-07-07, last modified: 2014-07-15
An attitude determination system for balloon-borne experiments is presented. The system provides pointing information in azimuth and elevation for instruments flying on stratospheric balloons over Antarctica. In-flight attitude is given by the real-time combination of readings from star cameras, a magnetometer, sun sensors, GPS, gyroscopes, tilt sensors and an elevation encoder. Post-flight attitude reconstruction is determined from star camera solutions, interpolated by the gyroscopes using an extended Kalman Filter. The multi-sensor system was employed by the Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol), an experiment that measures polarized thermal emission from interstellar dust clouds. A similar system was designed for the upcoming flight of SPIDER, a Cosmic Microwave Background polarization experiment. The pointing requirements for these experiments are discussed, as well as the challenges in designing attitude reconstruction systems for high altitude balloon flights. In the 2010 and 2012 BLASTPol flights from McMurdo Station, Antarctica, the system demonstrated an accuracy of <5' rms in-flight, and <5" rms post-flight.
[39]  oai:arXiv.org:1407.2906  [pdf] - 1215590
Pre-flight integration and characterization of the SPIDER balloon-borne telescope
Comments: 25 pages, 14 figures. Presented at SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VII, June 26, 2014. To be published in Proceedings of SPIE Volume 9153
Submitted: 2014-07-09
We present the results of integration and characterization of the SPIDER instrument after the 2013 pre-flight campaign. SPIDER is a balloon-borne polarimeter designed to probe the primordial gravitational wave signal in the degree-scale $B$-mode polarization of the cosmic microwave background. With six independent telescopes housing over 2000 detectors in the 94 GHz and 150 GHz frequency bands, SPIDER will map 7.5% of the sky with a depth of 11 to 14 $\mu$K$\cdot$arcmin at each frequency, which is a factor of $\sim$5 improvement over Planck. We discuss the integration of the pointing, cryogenic, electronics, and power sub-systems, as well as pre-flight characterization of the detectors and optical systems. SPIDER is well prepared for a December 2014 flight from Antarctica, and is expected to be limited by astrophysical foreground emission, and not instrumental sensitivity, over the survey region.
[40]  oai:arXiv.org:1407.1880  [pdf] - 1215472
Pointing control for the SPIDER balloon-borne telescope
Comments: 20 pages, 12 figures, Presented at SPIE Ground-based and Airborne Telescopes V, June 23, 2014. To be published in Proceedings of SPIE Volume 9145
Submitted: 2014-07-07
We present the technology and control methods developed for the pointing system of the SPIDER experiment. SPIDER is a balloon-borne polarimeter designed to detect the imprint of primordial gravitational waves in the polarization of the Cosmic Microwave Background radiation. We describe the two main components of the telescope's azimuth drive: the reaction wheel and the motorized pivot. A 13 kHz PI control loop runs on a digital signal processor, with feedback from fibre optic rate gyroscopes. This system can control azimuthal speed with < 0.02 deg/s RMS error. To control elevation, SPIDER uses stepper-motor-driven linear actuators to rotate the cryostat, which houses the optical instruments, relative to the outer frame. With the velocity in each axis controlled in this way, higher-level control loops on the onboard flight computers can implement the pointing and scanning observation modes required for the experiment. We have accomplished the non-trivial task of scanning a 5000 lb payload sinusoidally in azimuth at a peak acceleration of 0.8 deg/s$^2$, and a peak speed of 6 deg/s. We can do so while reliably achieving sub-arcminute pointing control accuracy.
[41]  oai:arXiv.org:1407.1882  [pdf] - 1215474
BLASTbus electronics: general-purpose readout and control for balloon-borne experiments
Comments: Presented at SPIE Ground-based and Airborne Telescopes V, June 23, 2014. To be published in Proceedings of SPIE Volume 9145
Submitted: 2014-07-07
We present the second generation BLASTbus electronics. The primary purposes of this system are detector readout, attitude control, and cryogenic housekeeping, for balloon-borne telescopes. Readout of neutron transmutation doped germanium (NTD-Ge) bolometers requires low noise and parallel acquisition of hundreds of analog signals. Controlling a telescope's attitude requires the capability to interface to a wide variety of sensors and motors, and to use them together in a fast, closed loop. To achieve these different goals, the BLASTbus system employs a flexible motherboard-daughterboard architecture. The programmable motherboard features a digital signal processor (DSP) and field-programmable gate array (FPGA), as well as slots for three daughterboards. The daughterboards provide the interface to the outside world, with versions for analog to digital conversion, and optoisolated digital input/output. With the versatility afforded by this design, the BLASTbus also finds uses in cryogenic, thermometry, and power systems. For accurate timing control to tie everything together, the system operates in a fully synchronous manner. BLASTbus electronics have been successfully deployed to the South Pole, and flown on stratospheric balloons.
[42]  oai:arXiv.org:1407.1881  [pdf] - 1215473
Design and construction of a carbon fiber gondola for the SPIDER balloon-borne telescope
Comments: 16 pages, 11 figures. Presented at SPIE Ground-based and Airborne Telescopes V, June 23, 2014. To be published in Proceedings of SPIE Volume 9145
Submitted: 2014-07-07
We introduce the light-weight carbon fiber and aluminum gondola designed for the SPIDER balloon-borne telescope. SPIDER is designed to measure the polarization of the Cosmic Microwave Background radiation with unprecedented sensitivity and control of systematics in search of the imprint of inflation: a period of exponential expansion in the early Universe. The requirements of this balloon-borne instrument put tight constrains on the mass budget of the payload. The SPIDER gondola is designed to house the experiment and guarantee its operational and structural integrity during its balloon-borne flight, while using less than 10% of the total mass of the payload. We present a construction method for the gondola based on carbon fiber reinforced polymer tubes with aluminum inserts and aluminum multi-tube joints. We describe the validation of the model through Finite Element Analysis and mechanical tests.
[43]  oai:arXiv.org:1404.0381  [pdf] - 1208751
Stellar Signatures of AGN Jet Triggered Star Formation
Comments:
Submitted: 2014-04-01
To investigate feedback between relativistic jets emanating from Active Galactic Nuclei (AGN) and the stellar population of the host galaxy, we analyze the long-term evolution of the galaxy-scale simulations by Gaibler et al. (2012) of jets in massive, gas-rich galaxies at z ~ 2 - 3 and of stars formed in the host galaxies. We find strong, jet-induced differences in the resulting stellar populations of galaxies that host relativistic jets and galaxies that do not, including correlations in stellar locations, velocities, and ages. Jets are found to generate distributions of increased radial and vertical velocities that persist long enough to effectively extend the stellar structure of the host. The jets cause the formation of bow shocks that move out through the disk, generating rings of star formation within the disk. The bow shock often accelerates pockets of gas in which stars form, yielding populations of stars with significant radial and vertical velocities, some of which have large enough velocities to escape the galaxy. These stellar population signatures can serve to identify past jet activity as well as jet-induced star formation.
[44]  oai:arXiv.org:1402.2591  [pdf] - 782546
Half-wave Plates for the Spider Cosmic Microwave Background Polarimeter
Comments: 165 pages, PhD Thesis
Submitted: 2014-02-11
Spider is a balloon-borne array of six telescopes that will observe the Cosmic Microwave Background. The 2400 antenna-coupled bolometers in the instrument will make a polarization map of the CMB with ~degree resolution at 150 GHz and 95 GHz. Polarization modulation is achieved via a cryogenic sapphire half-wave plate (HWP) skyward of the primary optic. In this thesis, the design, construction, and lab testing of the HWP system are discussed. The polarization modulation of these optical stacks is modeled using a physical optics calculation and Mueller matrices. Performance tests in both the lab and integrated in the flight cryostat show consistency with the model.
[45]  oai:arXiv.org:1106.3087  [pdf] - 659433
SPIDER: Probing the Early Universe with a Suborbital Polarimeter
Comments: 29 pages, 8 figures, 4 tables; v2: matches published version, flight schedule updated, two typos fixed in Table 2, references and minor clarifications added, results unchanged
Submitted: 2011-06-15, last modified: 2013-05-02
We evaluate the ability of SPIDER, a balloon-borne polarimeter, to detect a divergence-free polarization pattern ("B-modes") in the Cosmic Microwave Background (CMB). In the inflationary scenario, the amplitude of this signal is proportional to that of the primordial scalar perturbations through the tensor-to-scalar ratio r. We show that the expected level of systematic error in the SPIDER instrument is significantly below the amplitude of an interesting cosmological signal with r=0.03. We present a scanning strategy that enables us to minimize uncertainty in the reconstruction of the Stokes parameters used to characterize the CMB, while accessing a relatively wide range of angular scales. Evaluating the amplitude of the polarized Galactic emission in the SPIDER field, we conclude that the polarized emission from interstellar dust is as bright or brighter than the cosmological signal at all SPIDER frequencies (90 GHz, 150 GHz, and 280 GHz), a situation similar to that found in the "Southern Hole." We show that two ~20-day flights of the SPIDER instrument can constrain the amplitude of the B-mode signal to r<0.03 (99% CL) even when foreground contamination is taken into account. In the absence of foregrounds, the same limit can be reached after one 20-day flight.
[46]  oai:arXiv.org:1207.4555  [pdf] - 1124947
The impact of baryons on the spins and shapes of dark matter haloes
Comments: 15 pages, 8 figures; accepted for publication in MNRAS
Submitted: 2012-07-19, last modified: 2013-01-21
We use numerical simulations to investigate how the statistical properties of dark matter (DM) haloes are affected by the baryonic processes associated with galaxy formation. We focus on how these processes influence the spin and shape of a large number of DM haloes covering a wide range of mass scales, from galaxies to clusters at redshifts zero and one, extending to dwarf galaxies at redshift two. The haloes are extracted from the OverWhelmingly Large Simulations, a suite of state-of-the-art high-resolution cosmological simulations run with a range of feedback prescriptions. We find that the median spin parameter in DM-only simulations is independent of mass, redshift and cosmology. At z=0 baryons increase the spin of the DM in the central region (<=0.25 r_200) by up to 30 per cent when feedback is weak or absent. This increase can be attributed to the transfer of angular momentum from baryons to the DM, but is no longer present at z=2. We also present fits to the mass dependence of the DM halo shape at both low and high redshift. At z=0 the sphericity (triaxiality) is negatively (positively) correlated with halo mass and both results are independent of cosmology. Interestingly, these mass-dependent trends are markedly weaker at z=2. While the cooling of baryons acts to make the overall DM halo more spherical, stronger feedback prescriptions tend to reduce the impact of baryons by reducing the central halo mass concentration. More generally, we demonstrate a strongly positive (negative) correlation between halo sphericity (triaxiality) and galaxy formation efficiency, with the latter measured using the central halo baryon fraction. In conclusion, our results suggest that the effects of baryons on the DM halo spin and shape are minor when the effects of cooling are mitigated, as required by realistic models of galaxy formation, although they remain significant for the inner halo.
[47]  oai:arXiv.org:1109.4612  [pdf] - 1084289
Influence of baryons on the orbital structure of dark matter haloes
Comments: 18 pages, 13 figures, 3 tables. Accepted for publication in MNRAS
Submitted: 2011-09-21, last modified: 2012-04-23
We explore the dynamical signatures imprinted by baryons on dark matter haloes during the formation process using the OverWhelmingly Large Simulations (OWLS), a set of state-of-the-art high-resolution cosmological hydrodynamical simulations. We present a detailed study of the effects of the implemented feedback prescriptions on the orbits of dark matter particles, stellar particles and subhaloes, analysing runs with no feedback, with stellar feedback and with feedback from supermassive black holes. We focus on the central regions (0.25 r_{200}) of haloes with virial masses ~ 6 x 10^{13} (~ 7 x 10^{11}) Msun/h at z = 0(2). We also investigate how the orbital content (relative fractions of the different orbital types) of these haloes depends on several key parameters such as their mass, redshift and dynamical state. The results of spectral analyses of the orbital content of these simulations are compared, and the change in fraction of box, tube and irregular orbits is quantified. Box orbits are found to dominate the orbital structure of dark matter haloes in cosmological simulations. There is a strong anticorrelation between the fraction of box orbits and the central baryon fraction. While radiative cooling acts to reduce the fraction of box orbits, strong feedback implementations result in a similar orbital distribution to that of the dark matter only case. The orbital content described by the stellar particles is found to be remarkably similar to that drawn from the orbits of dark matter particles, suggesting that either they have forgotten their dynamical history, or that subhaloes bringing in stars are not biased significantly with respect to the main distribution. The orbital content of the subhaloes is in broad agreement with that seen in the outer regions of the particle distributions.
[48]  oai:arXiv.org:1006.3359  [pdf] - 934285
Modeling dielectric half-wave plates for cosmic microwave background polarimetry using a Mueller matrix formalism
Comments: 11 pages, 4 figures; accepted for publication in Applied Optics
Submitted: 2010-06-16, last modified: 2011-06-22
We derive an analytic formula using the Mueller matrix formalism that parameterizes the nonidealities of a half-wave plate (HWP) made from dielectric antireflection-coated birefringent slabs. This model accounts for frequency-dependent effects at normal incidence, including effects driven by the reflections at dielectric boundaries. The model also may be used to guide the characterization of an instrument that uses a HWP. We discuss the coupling of a HWP to different source spectra, and the potential impact of that effect on foreground removal for the SPIDER cosmic microwave background experiment. We also describe a way to use this model in a mapmaking algorithm that fully corrects for HWP nonidealities.
[49]  oai:arXiv.org:1106.2507  [pdf] - 372118
Thermal architecture for the SPIDER flight cryostat
Comments: 11 pages, 4 figures; as published in the conference proceedings for SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy V (2010)
Submitted: 2011-06-13
We describe the cryogenic system for SPIDER, a balloon-borne microwave polarimeter that will map 8% of the sky with degree-scale angular resolution. The system consists of a 1284 L liquid helium cryostat and a 16 L capillary-filled superfluid helium tank, which provide base operating temperatures of 4 K and 1.5 K, respectively. Closed-cycle helium-3 adsorption refrigerators supply sub-Kelvin cooling power to multiple focal planes, which are housed in monochromatic telescope inserts. The main helium tank is suspended inside the vacuum vessel with thermally insulating fiberglass flexures, and shielded from thermal radiation by a combination of two vapor cooled shields and multi-layer insulation. This system allows for an extremely low instrumental background and a hold time in excess of 25 days. The total mass of the cryogenic system, including cryogens, is approximately 1000 kg. This enables conventional long duration balloon flights. We will discuss the design, thermal analysis, and qualification of the cryogenic system.
[50]  oai:arXiv.org:1106.2173  [pdf] - 372068
Design and performance of the Spider instrument
Comments: 12 pages, 5 figures, Proceedings of SPIE, Astronomical Telescopes and Instrumentation 2010, San Diego, CA
Submitted: 2011-06-10
Here we describe the design and performance of the Spider instrument. Spider is a balloon-borne cosmic microwave background polarization imager that will map part of the sky at 90, 145, and 280 GHz with sub-degree resolution and high sensitivity. This paper discusses the general design principles of the instrument inserts, mechanical structures, optics, focal plane architecture, thermal architecture, and magnetic shielding of the TES sensors and SQUID multiplexer. We also describe the optical, noise, and magnetic shielding performance of the 145 GHz prototype instrument insert.
[51]  oai:arXiv.org:1106.2158  [pdf] - 371654
SPIDER: a balloon-borne CMB polarimeter for large angular scales
Comments: 12 pages, 6 figures; as published in the conference proceedings for SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy V (2010)
Submitted: 2011-06-10
We describe SPIDER, a balloon-borne instrument to map the polarization of the millimeter-wave sky with degree angular resolution. Spider consists of six monochromatic refracting telescopes, each illuminating a focal plane of large-format antenna-coupled bolometer arrays. A total of 2,624 superconducting transition-edge sensors are distributed among three observing bands centered at 90, 150, and 280 GHz. A cold half-wave plate at the aperture of each telescope modulates the polarization of incoming light to control systematics. Spider's first flight will be a 20-30-day Antarctic balloon campaign in December 2011. This flight will map \sim8% of the sky to achieve unprecedented sensitivity to the polarization signature of the gravitational wave background predicted by inflationary cosmology. The Spider mission will also serve as a proving ground for these detector technologies in preparation for a future satellite mission.
[52]  oai:arXiv.org:1102.0559  [pdf] - 1051855
Spider Optimization II: Optical, Magnetic and Foreground Effects
Comments: submitted to APJ, 15 pages, 12 figures
Submitted: 2011-02-02
Spider is a balloon-borne instrument designed to map the polarization of the cosmic microwave background (CMB) with degree-scale resolution over a large fraction of the sky. Spider's main goal is to measure the amplitude of primordial gravitational waves through their imprint on the polarization of the CMB if the tensor-to-scalar ratio, r, is greater than 0.03. To achieve this goal, instrumental systematic errors must be controlled with unprecedented accuracy. Here, we build on previous work to use simulations of Spider observations to examine the impact of several systematic effects that have been characterized through testing and modeling of various instrument components. In particular, we investigate the impact of the non-ideal spectral response of the half-wave plates, coupling between focal plane components and the Earth's magnetic field, and beam mismatches and asymmetries. We also present a model of diffuse polarized foreground emission based on a three-dimensional model of the Galactic magnetic field and dust, and study the interaction of this foreground emission with our observation strategy and instrumental effects. We find that the expected level of foreground and systematic contamination is sufficiently low for Spider to achieve its science goals.
[53]  oai:arXiv.org:1006.3874  [pdf] - 934286
Modeling and characterization of the SPIDER half-wave plate
Comments:
Submitted: 2010-06-19
Spider is a balloon-borne array of six telescopes that will observe the Cosmic Microwave Background. The 2624 antenna-coupled bolometers in the instrument will make a polarization map of the CMB with approximately one-half degree resolution at 145 GHz. Polarization modulation is achieved via a cryogenic sapphire half-wave plate (HWP) skyward of the primary optic. We have measured millimeter-wave transmission spectra of the sapphire at room and cryogenic temperatures. The spectra are consistent with our physical optics model, and the data gives excellent measurements of the indices of A-cut sapphire. We have also taken preliminary spectra of the integrated HWP, optical system, and detectors in the prototype Spider receiver. We calculate the variation in response of the HWP between observing the CMB and foreground spectra, and estimate that it should not limit the Spider constraints on inflation.
[54]  oai:arXiv.org:0912.0614  [pdf] - 1018608
Satellites in the field and lens galaxies: SDSS/COSMOS vs. SLACS/CLASS
Comments: 21 pages, 11 figures. Accepted by MNRAS. Some references corrected/updated
Submitted: 2009-12-03, last modified: 2010-01-04
The incidence of sub-galactic level substructures is an important quantity, as it is a generic prediction of high-resolution Cold Dark Matter (CDM) models which is susceptible to observational test. Confrontation of theory with observations is currently in an uncertain state. In particular, gravitational lens systems appear to show evidence for flux ratio anomalies, which are expected from CDM substructures although not necessarily in the same range of radius as observed. However, the current small samples of lenses suggest that the lens galaxies in these systems are unusually often accompanied by luminous galaxies. Here we investigate a large sample of unlensed elliptical galaxies from the COSMOS survey, and determine the fraction of objects with satellites, in excess of background counts, as a function of satellite brightness and separation from the primary object. We find that the incidence of luminous satellites within 20 kpc is typically a few tenths of one percent for satellites of a few tenths of the primary flux, comparable to what is observed for the wider but shallower SDSS survey. Although the environments of lenses in the SLACS survey are compatible with this observation, the CLASS radio survey lenses are significantly in excess of this.
[55]  oai:arXiv.org:0809.3134  [pdf] - 16473
Luminous satellite galaxies in gravitational lenses
Comments: 9 pages, 4 figures. Accepted for publication in MNRAS
Submitted: 2008-09-18
Substructures, expected in cold dark matter haloes, have been proposed to explain the anomalous flux ratios in gravitational lenses. About 25% of lenses in the Cosmic Lens All-Sky Survey (CLASS) appear to have luminous satellites within ~ 5 kpc/h of the main lensing galaxies, which are usually at redshift z ~ 0.2-1. In this work we use the Millennium Simulation combined with galaxy catalogues from semi-analytical techniques to study the predicted frequency of such satellites in simulated haloes. The fraction of haloes that host bright satellites within the (projected) central regions is similar for red and blue hosts and is found to increase as a function of host halo mass and redshift. Specifically, at z = 1, about 11% of galaxy-sized haloes (with masses between 10^{12} M_sun/h and 10^{13} M_sun/h) host bright satellite galaxies within a projected radius of 5 kpc/h. This fraction increases to about 17% (25%) if we consider bright (all) satellites of only group-sized haloes (with masses between 10^{13} M_sun/h and 10^{14} M_sun/h). These results are roughly consistent with the fraction (~ 25%) of CLASS lensing galaxies observed to host luminous satellites. At z = 0, only ~ 3% of galaxy-sized haloes host bright satellite galaxies. The fraction rises to ~ 6%, (10%) if we consider bright (all) satellites of only group-sized haloes at z = 0. However, most of the satellites found in the inner regions are `orphan' galaxies where the dark matter haloes have been completely stripped. Thus the agreement crucially depends on the true survival rate of these `orphan' galaxies. We also discuss the effects of numerical resolution and cosmologies on our results.
[56]  oai:arXiv.org:0807.1548  [pdf] - 14377
SPIDER: A Balloon-borne Large-scale CMB Polarimeter
Comments: To appear in Proceedings of SPIE Volume 7010, Editors: Jacobus M. Oschmann, Jr.; Mattheus W. M. de Graauw; Howard A. MacEwen, "Space Telescopes and Instrumentation 2008: Optical, Infrared, and Millimeter"
Submitted: 2008-07-09
Spider is a balloon-borne experiment that will measure the polarization of the Cosmic Microwave Background over a large fraction of a sky at 1 degree resolution. Six monochromatic refracting millimeter-wave telescopes with large arrays of antenna-coupled transition-edge superconducting bolometers will provide system sensitivities of 4.2 and 3.1 micro K_cmb rt s at 100 and 150 GHz, respectively. A rotating half-wave plate will modulate the polarization sensitivity of each telescope, controlling systematics. Bolometer arrays operating at 225 GHz and 275 GHz will allow removal of polarized galactic foregrounds. In a 2-6 day first flight from Alice Springs, Australia in 2010, Spider will map 50% of the sky to a depth necessary to improve our knowledge of the reionization optical depth by a large factor.
[57]  oai:arXiv.org:0710.0375  [pdf] - 5549
Spider Optimization: Probing the Systematics of a Large Scale B-Mode Experiment
Comments: 15 pages, 12 figs, version with full resolution figs available here http://www.astro.caltech.edu/~lgg/spider_front.htm
Submitted: 2007-10-01
Spider is a long-duration, balloon-borne polarimeter designed to measure large scale Cosmic Microwave Background (CMB) polarization with very high sensitivity and control of systematics. The instrument will map over half the sky with degree angular resolution in I, Q and U Stokes parameters, in four frequency bands from 96 to 275 GHz. Spider's ultimate goal is to detect the primordial gravity wave signal imprinted on the CMB B-mode polarization. One of the challenges in achieving this goal is the minimization of the contamination of B-modes by systematic effects. This paper explores a number of instrument systematics and observing strategies in order to optimize B-mode sensitivity. This is done by injecting realistic-amplitude, time-varying systematics in a set of simulated time-streams. Tests of the impact of detector noise characteristics, pointing jitter, payload pendulations, polarization angle offsets, beam systematics and receiver gain drifts are shown. Spider's default observing strategy is to spin continuously in azimuth, with polarization modulation achieved by either a rapidly spinning half-wave plate or a rapidly spinning gondola and a slowly stepped half-wave plate. Although the latter is more susceptible to systematics, results shown here indicate that either mode of operation can be used by Spider.
[58]  oai:arXiv.org:0707.1937  [pdf] - 3045
Figure rotation of dark halos in CDM simulations
Comments: accepted to MNRAS, 8 pages
Submitted: 2007-07-13
We investigate the figure rotation of dark matter halos identified in Lambda CDM simulations. We find that when strict criteria are used to select suitable halos for study, 5 of the 222 halos identified in our z=0 simulation output undergo coherent figure rotation over a 5h^{-1}Gyr period. We discuss the effects of varying the selection criteria and find that pattern speeds for a much larger fraction of the halos can be measured when the criteria are relaxed. Pattern speeds measured over a 1h^{-1}Gyr period follow a log-normal distribution, centred at Omega_p = 0.25h rad/Gyr with a maximum value of 0.94h rad/Gyr. Over a 5h^{-1}Gyr period, the average pattern speed of a halo is about 0.1h rad/Gyr and the largest pattern speed found is 0.24h rad/Gyr. Less than half of the selected halos showed alignment between their figure rotation axis and minor axis, the exact fraction being somewhat dependent on how one defines a halo. While the pattern speeds observed are lower than those generally thought capable of causing spiral structure, we note that coherent figure rotation is found over very long periods and argue that further simulations would be required before strong conclusions about spiral structure in all galaxies could be drawn. We find no correlation between halo properties such as total mass and the pattern speed.