Normalized to: Zychowski, P.
[1]
oai:arXiv.org:1508.07472 [pdf] - 1941990
Software design for the control system for Small-Size Telescopes with
single-mirror of the Cherenkov Telescope Array
Porcelli, A.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Borkowski, J.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Rameez, M.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Rajda, P.;
Schioppa, E. jr;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Pujadas, I. Troyano;
Toscano, S.;
Walter, R.;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.;
Zychowski, P.
Submitted: 2015-08-29
The Small-Size Telescope with single-mirror (SST-1M) is a 4 m Davies-Cotton
telescope and is among the proposed telescope designs for the Cherenkov
Telescope Array (CTA). It is conceived to provide the high-energy ($>$ few TeV)
coverage. The SST-1M contains proven technology for the telescope structure and
innovative electronics and photosensors for the camera. Its design is meant to
be simple, low-budget and easy-to-build industrially.
Each device subsystem of an SST-1M telescope is made visible to CTA through a
dedicated industrial standard server. The software is being developed in
collaboration with the CTA Medium-Size Telescopes to ensure compatibility and
uniformity of the array control. Early operations of the SST-1M prototype will
be performed with a subset of the CTA central array control system based on the
Alma Common Software (ACS). The triggered event data are time stamped,
formatted and finally transmitted to the CTA data acquisition.
The software system developed to control the devices of an SST-1M telescope
is described, as well as the interface between the telescope abstraction to the
CTA central control and the data acquisition system.
[2]
oai:arXiv.org:1508.06453 [pdf] - 1266989
The SST-1M camera for the Cherenkov Telescope Array
Schioppa, E. J.;
Cadoux, F.;
Christov, A.;
della Volpe, D.;
Favre, Y.;
Heller, M.;
Montaruli, T.;
Porcelli, A.;
Rameez, M.;
Pujadas, I. Troyano;
Bilnik, W.;
Blocki, J.;
Bogacz, L.;
Bulik, T.;
Curylo, M.;
Dyrda, M.;
Frankowski, A.;
Grudniki, L.;
Grudzinska, M.;
Idzkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszalek, A.;
Michaowski, J.;
Moderski, R.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Pasko, P.;
Pech, M.;
Prandini, E.;
Rajda, P.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowinski, M.;
Stawarz, L.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Walter, R.;
Wiecek, M.;
Zagdanski, A.;
Zietara, K.;
Zychowski, P.
Submitted: 2015-08-26
The prototype camera of the single-mirror Small Size Telescopes (SST-1M)
proposed for the Cherenkov Telescope Array (CTA) project has been designed to
be very compact and to deliver high performance over thirty years of operation.
The camera is composed of an hexagonal photo-detection plane made of custom
designed large area hexagonal silicon photomultipliers and a high throughput,
highly configurable, fully digital readout and trigger system (DigiCam). The
camera will be installed on the telescope structure at the H.
Niewodnicza{\'n}ski institute of Nuclear Physics in Krakow in fall 2015. In
this contribution, we review the steps that led to the development of the
innovative photo-detection plane and readout electronics, and we describe the
test and calibration strategy adopted.