Normalized to: Ziętara, K.
[4]
oai:arXiv.org:1509.00266 [pdf] - 1938092
Using muon rings for the optical throughput calibration of the SST-1M
prototype for the Cherenkov Telescope Array
Toscano, S.;
Prandini, E.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Rameez, M.;
Rajda, P.;
Schioppa, E. jr.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Pujadas, I. Troyano;
Walter, R.;
Więcek, M.;
Zagdański, A.;
Ziętara, K.;
Żychowski, P.
Submitted: 2015-09-01
Imaging Atmospheric Cherenkov Telescopes (IACTs) are ground-based instruments
devoted to the study of very high energy gamma-rays coming from space. The
detection technique consists of observing images created by the Cherenkov light
emitted when gamma rays, or more generally cosmic rays, propagate through the
atmosphere. While in the case of protons or gamma-rays the images present a
filled and more or less elongated shape, energetic muons penetrating the
atmosphere are visualised as characteristic circular rings or arcs. A
relatively simple analysis of the ring images allows the reconstruction of all
the relevant parameters of the detected muons, such as the energy, the impact
parameter, and the incoming direction, with the final aim to use them to
calibrate the total optical throughput of the given IACT telescope. We present
the results of preliminary studies on the use of images created by muons as
optical throughput calibrators of the single mirror small size telescope
prototype SST-1M proposed for the Cherenkov Telescope Array.
[5]
oai:arXiv.org:1508.06397 [pdf] - 1938071
Camera calibration strategy of the SST-1M prototype of the Cherenokov
Telescope Array
Prandini, E.;
Heller, M.;
Lyard, E.;
Schioppa, E. jr.;
Neronov, A.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Rameez, M.;
Rajda, P.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Pujadas, I. Troyano;
Walter, R.;
Więcek, M.;
Zagdański, A.;
Ziętara, K.;
Żychowski, P.
Submitted: 2015-08-26
The SST-1M telescope is one of the prototypes under construction proposed to
be part of the future Cherenkov Telescope Array. It uses a standard
Davis-Cotton design for the optics and telescope structure, with a dish
diameter of 4 meters and a large field-of-view of 9 degrees.
The innovative camera design is composed of a photo-detection plane with 1296
pixels including entrance window, light concentrators, Silicon Photomultipliers
(SiPMs), and pre-amplifier stages together with a fully digital readout and
trigger electronics, DigiCam.
In this contribution we give a general description of the analysis chain
designed for the SST-1M prototype. In particular we focus on the calibration
strategy used to convert the SiPM signals registered by DigiCam to the
quantities needed for Cherenkov image analysis. The calibration is based on an
online feedback system to stabilize the gain of the SiPMs, as well as dedicated
events (dark count, pedestal, and light flasher events) to be taken during the
normal operation of the prototype.
[6]
oai:arXiv.org:1508.06082 [pdf] - 1265844
DigiCam - Fully Digital Compact Read-out and Trigger Electronics for the
SST-1M Telescope proposed for the Cherenkov Telescope Array
Rajda, P.;
Ziętara, K.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Rameez, M.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Schioppa, E. jr;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Pujadas, I. Troyano;
Walter, R.;
Więcek, M.;
Zagdański, A.;
Żychowski, P.
Submitted: 2015-08-25
The SST-1M is one of three prototype small-sized telescope designs proposed
for the Cherenkov Telescope Array, and is built by a consortium of Polish and
Swiss institutions. The SST-1M will operate with DigiCam - an innovative,
compact camera with fully digital read-out and trigger electronics. A high
level of integration will be achieved by massively deploying state-of-the-art
multi-gigabit transmission channels, beginning from the ADC flash converters,
through the internal data and trigger signals transmission over backplanes and
cables, to the camera's server link. Such an approach makes it possible to
design the camera to fit the size and weight requirements of the SST-1M
exactly, and provide low power consumption, high reliability and long lifetime.
The structure of the digital electronics will be presented, along with main
physical building blocks and the internal architecture of FPGA functional
subsystems.