The present debate on the reliability of astrophysical opacities has reached a new climax with the recent measurements of Fe opacities on the Z-machine at the Sandia National Laboratory \citep{Bailey2015}. To understand the differences between theoretical results, on the one hand, and experiments on the other, as well as the differences among the various theoretical results, detailed comparisons are needed. Many ingredients are involved in the calculation of opacities; deconstructing the whole process and comparing the differences at each step are necessary to quantify their importance and impact on the final results. We present here such a comparison using the two main approaches to calculate the required atomic data, the $R$-Matrix and distorted-wave methods, as well as sets of configurations and coupling schemes to quantify the effects on the opacities for the $Fe\ XVII$ and $Ni\ XIV$ ions.

We calculate collision strengths and their thermally-averaged Maxwellian values for electron excitation and de-excitation between the fifteen lowest levels of singly-ionised cobalt, Co+, which give rise to emission lines in the near- and mid-infrared. Transition probabilities are also calculated and relative line intensities predicted for conditions typical of supernova ejecta. The diagnostic potential of the 10.52, 15.46 and 14.74 micro-metre transition lines is briefly discussed.

In the framework of the present phase -- IPOPv2 -- of the international Opacity Project (OP), a new web service has been implemented based on the latest release of the OP opacities. The user may construct online opacity tables to be conveniently included in stellar evolution codes in the format most commonly adopted by stellar physicists, namely the OPAL format. This facility encourages the use and comparison of both the OPAL and OP data sets in applications. The present service allows for the calculation of multi-element mixtures containing the 17 species (H, He, C, N, O, Ne, Na, Mg, Al, Si, S, Ar, Ca, Cr, Mn, Fe and Ni) considered by the OP, and underpins the latest release of OP opacities. This new service provides tables of Rosseland mean opacites using OP atomic data. We provide an alternative to the OPAL opacity services allowing direct comparison as well as study of the effect of uncertainties in stellar modeling due to mean opacities.

Several years ago, M. Asplund and coauthors (2004) proposed a revision of the Solar composition. The use of this new prescription for Solar abundances in standard stellar models generated a strong disagreement between the predictions and the observations of Solar observables. Many claimed that the Standard Solar Model (SSM) was faulty, and more specifically the opacities used in such models. As a result, activities around the stellar opacities were boosted. New experiments (J. Bailey at Sandia on Z-Pinch, The OPAC consortium at LULI200) to measure directly absorbtion coefficients have been realized or are underway. Several theoretical groups (CEA-OPAS, Los Alamos Nat. Lab., CEA-SCORCG, The Opacity Project - The Iron Project (IPOPv2)) have started new sets of calculations using different approaches and codes. While the new results seem to confirm the good quality of the opacities used in SSM, it remains important to improve and complement the data currently available. We present recent results in the case of the photoionization cross sections for Ni XIV (Ni13+ ) from IPOPv2 and possible implications on stellar modelling.

Opacity is an important ingredient of the evolution of stars. The calculation of opacity coefficients is complicated by the fact that the plasma contains partially ionized heavy ions that contribute to opacity dominated by H and He. Up to now, the astrophysical community has greatly benefited from the work of the contributions of Los Alamos [1], Livermore [2] and the Opacity Project (OP) [3]. However unexplained differences of up to 50% in the radiative forces and Rosseland mean values for Fe have been noticed for conditions corresponding to stellar envelopes. Such uncertainty has a real impact on the understanding of pulsating stellar envelopes, on the excitation of modes, and on the identification of the mode frequencies. Temperature and density conditions equivalent to those found in stars can now be produced in laboratory experiments for various atomic species. Recently the photo-absorption spectra of nickel and iron plasmas have been measured during the LULI 2010 campaign, for temperatures between 15 and 40 eV and densities of ~3 mg/cm3. A large theoretical collaboration, the "OPAC", has been formed to prepare these experiments. We present here the set of opacity calculations performed by eight different groups for conditions relevant to the LULI 2010 experiment and to astrophysical stellar envelope conditions.

Seismology of stars is strongly developing. To address this question we have formed an international collaboration OPAC to perform specific experimental measurements, compare opacity calculations and improve the opacity calculations in the stellar codes [1]. We consider the following opacity codes: SCO, CASSANDRA, STA, OPAS, LEDCOP, OP, SCO-RCG. Their comparison has shown large differences for Fe and Ni in equivalent conditions of envelopes of type II supernova precursors, temperatures between 15 and 40 eV and densities of a few mg/cm3 [2, 3, 4]. LEDCOP, OPAS, SCO-RCG structure codes and STA give similar results and differ from OP ones for the lower temperatures and for spectral interval values [3]. In this work we discuss the role of Configuration Interaction (CI) and the influence of the number of used configurations. We present and include in the opacity code comparisons new HULLAC-v9 calculations [5, 6] that include full CI. To illustrate the importance of this effect we compare different CI approximations (modes) available in HULLAC-v9 [7]. These results are compared to previous predictions and to experimental data. Differences with OP results are discussed.

Opacity calculations are basic ingredients of stellar modelling. They play a crucial role in the interpretation of acoustic modes detected by SoHO, COROT and KEPLER. In this review we present our activities on both theoretical and experimental sides. We show new calculations of opacity spectra and comparisons between eight groups who produce opacity spectra calculations in the domain where experiments are scheduled. Real differences are noticed with real astrophysical consequences when one extends helioseismology to cluster studies of different compositions. Two cases are considered presently: (1) the solar radiative zone and (2) the beta Cephei envelops. We describe how our experiments are performed and new preliminary results on nickel obtained in the campaign 2010 at LULI 2000 at Polytechnique.

The lifetime of solar-like stars, the envelope structure of more massive stars, and stellar acoustic frequencies largely depend on the radiative properties of the stellar plasma. Up to now, these complex quantities have been estimated only theoretically. The development of the powerful tools of helio- and astero- seismology has made it possible to gain insights on the interiors of stars. Consequently, increased emphasis is now placed on knowledge of the monochromatic opacity coefficients. Here we review how these radiative properties play a role, and where they are most important. We then concentrate specifically on the envelopes of $\beta$ Cephei variable stars. We discuss the dispersion of eight different theoretical estimates of the monochromatic opacity spectrum and the challenges we need to face to check these calculations experimentally.

We examine the constraints imposed by helioseismic data on the solar heavy element abundances. In prior work we argued that the measured depth of the surface convection zone R_CZ and the surface helium abundance Y_surf were good metallicity indicators which placed separable constraints on light metals (CNONe) and the heavier species with good relative meteoritic abundances. The resulting interiors-based abundance scale was higher than some published studies based on 3D model atmospheres at a highly significant level. In this paper we explore the usage of the solar sound speed in the radiative interior as an additional diagnostic, and find that it is sensitive to changes in the Ne/O ratio even for models constructed to have the same R_CZ and Y_surf. Three distinct helioseismic tests (opacity in the radiative core, ionization in the convection zone, and the core mean molecular weight) yield consistent results. Our preferred O, Ne and Fe abundances are 8.86 +/-0.04, 8.15 +/-0.17 and 7.50 +/-0.05 respectively. They are consistent with the midrange of recently published 3D atmospheric abundances measurements. The values for O, Ne and Fe which combine interiors and atmospheric inferences are 8.83 +/-0.04, 8.08 +/-0.09 and 7.49 +/-0.04 respectively.

Codes to compute mean opacities and radiative accelerations for arbitrary chemical mixtures using the Opacity Project recently revised data have been restructured in a client--server architecture and transcribed as a subroutine library. This implementation increases efficiency in stellar modelling where element stratification due to diffusion processes is depth dependent, and thus requires repeated fast opacity reestimates. Three user modes are provided to fit different computing environments, namely a web browser, a local workstation and a distributed grid.

Helium-like ions provide the most important X-ray spectral diagnostics in high temperature fusion and astrophysical plasmas. We previously presented computed collision strengths for O~VII including relativistic fine structure, levels up to the $n=4$ complex and radiation damping of autoionizing resonances. We have extended this work to other He-like ions (N, Ne, Mg, Al, Si, S, Ca). The calculations are carried out using the Breit-Pauli R-matrix (BPRM) method with a 31-level eigenfunction expansion. Collision strengths for the principal lines important in X-ray plasma diagnostics, w, x, y and z, corresponding to the 4 transitions to the ground level 1s^2(^1S_0) <- 1s2p(^1P^o_1), 1s2p(^3P^o_2), 1s2p(^3P^o_1), 1s2s(^3S_1), are explicitly shown. We find the effect of radiation damping to be significant for the forbidden transitions in heavier He-like ions, which should affect the diagnostic line ratios. We extrapolated the collision strengths to their values at infinite energy using the Burgess-Tully extrapolation technique. This is required to calculate the Maxwellian average collision strengths at high temperature. We show that the coupling between dipole allowed and inter-combination transitions affects increasingly the effective collision strengths for the n ^1S_0 - n' ^3P_1 transition as the charge of the ion increases. This clearly affects the treatment of the extrapolation toward the infinite energy point of the collision strength. This work is carried out as part of the Iron Project-RmaX Network.

Using the code AUTOSTRUCTURE, extensive calculations of inner-shell atomic data have been made for the chemical elements He, C, N, O, Ne, Na, Mg, Al, Si, S, Ar, Ca, Cr, Mn, Fe and Ni. The results are used to obtain up-dated opacities from the Opacity Project, OP. A number of other improvements on earlier work have also been included. Rosseland-mean opacities from OP are compared with those from OPAL. Differences of 5 to 10% occur. OP gives the `Z-bump', at log(T)=5.2, to be shifted to slightly higher temperatures. The opacities from OP, as functions of temperature and density, are smoother than those from OPAL. Extensive tests show that the numerical accuracy of the OP opacities following integration over frequency mesh and interpolation on temperature-density mesh is better than 1%. Prior to a number of recent investigations which have indicated a need for a downward revision in the solar abundances of oxygen and other elements, there was good agreement between properties of the sun deduced from helioseismology and from stellar evolution models calculated using OPAL opacities. The revisions in abundances destroy that agreement. In a recent paper Bahcall et al argue that the agreement would be restored if opacities for the regions of the sun between 0.7 and 0.4 solar radii were larger than those given by OPAL by about 10%. In the region concerned, the present results from OP do not differ from those of OPAL by more than 2.5%.

An extensive set of dipole-allowed, intercombination, and forbidden transition probabilities for Fe V is presented. The Breit-Pauli R-matrix (BPRM) method is used to calculate 1.46 x 10^6 oscillator strengths for the allowed and intercombination E1 transitions among 3,865 fine-structure levels dominated by configuration complexes with n <= 10 and l <= 9. These data are complemented by an atomic structure configuration interaction (CI) calculation using the SUPERSTRUCTURE program for 362 relativistic quadrupole (E2) and magnetic dipole (M1) transitions among 65 low-lying levels dominated by the 3d^4 and 3d^ 4s configurations. Procedures have been developed for the identification of the large number of fine-structure levels and transitions obtained through the BPRM calculations. The target ion Fe VI is represented by an eigenfunction expansion of 19 fine-structure levels of 3d^3 and a set of correlation configurations. Fe V bound levels are obtained with angular and spin symmetries SL\pi and J\pi of the (e + Fe VI) system such that 2S+1 = 5,3,1, L <= 10, J <= 8 of even and odd parities. The completeness of the calculated dataset is verified in terms of all possible bound levels belonging to relevant LS terms and transitions in correspondence with the LS terms. The fine-structure averaged relativistic values are compared with previous Opacity Project LS coupling data and other works. The 362 forbidden transition probabilities considerably extend the available data for the E2 and M1 transtions, and are in good agreement with those computed by Garstang for the 3d^4 transitions.