This paper presents a survey of microwave front-end receivers installed at radio telescopes throughout the World. This unprecedented analysis was conducted as part of a review of front-end developments for Italian radio telescopes, initiated by the Italian National Institute for Astrophysics in 2016. Fifteen international radio telescopes have been selected to be representative of the instrumentation used for radio astronomical observations in the frequency domain from 300 MHz to 116 GHz. A comprehensive description of the existing receivers is presented and their characteristics are compared and discussed. The observing performances of the complete receiving chains are also presented. An overview of on-going developments illustrates and anticipates future trends in front-end projects to meet the most ambitious scientific research goals.

In the period 2012 June - 2013 October, the Sardinia Radio Telescope (SRT) went through the technical commissioning phase. The characterization involved three first-light receivers, ranging in frequency between 300MHz and 26GHz, connected to a Total Power back-end. It also tested and employed the telescope active surface installed in the main reflector of the antenna. The instrument status and performance proved to be in good agreement with the expectations in terms of surface panels alignment (at present 300 um rms to be improved with microwave holography), gain (~0.6 K/Jy in the given frequency range), pointing accuracy (5 arcsec at 22 GHz) and overall single-dish operational capabilities. Unresolved issues include the commissioning of the receiver centered at 350 MHz, which was compromised by several radio frequency interferences, and a lower-than-expected aperture efficiency for the 22-GHz receiver when pointing at low elevations. Nevertheless, the SRT, at present completing its Astronomical Validation phase, is positively approaching its opening to the scientific community.