The world's meteorite collections contain a very rich picture of what the early Solar System would have been made of, however the lack of spatial context with respect to their parent population for these samples is an issue. The asteroid population is equally as rich in surface mineralogies, and mapping these two populations (meteorites and asteroids) together is a major challenge for planetary science. Directly probing asteroids achieves this at a high cost. Observing meteorite falls and calculating their pre-atmospheric orbit on the other hand, is a cheaper way to approach the problem. The Global Fireball Observatory (GFO) collaboration was established in 2017 and brings together multiple institutions (from Australia, USA, Canada, Morocco, Saudi Arabia, the UK, and Argentina) to maximise the area for fireball observation time and therefore meteorite recoveries. The members have a choice to operate independently, but they can also choose to work in a fully collaborative manner with other GFO partners. This efficient approach leverages the experience gained from the Desert Fireball Network (DFN) pathfinder project in Australia. The state-of-the art technology (DFN camera systems and data reduction) and experience of the support teams is shared between all partners, freeing up time for science investigations and meteorite searching. With all networks combined together, the GFO collaboration already covers 0.6% of the Earth's surface for meteorite recovery as of mid-2019, and aims to reach 2% in the early 2020s. We estimate that after 5 years of operation, the GFO will have observed a fireball from virtually every meteorite type. This combined effort will bring new, fresh, extra-terrestrial material to the labs, yielding new insights about the formation of the Solar System.

We present the star-formation history of the low surface brightness (LSB) galaxy UGC 628 as part of the MUSCEL program (MUltiwavelength observations of the Structure, Chemistry, and Evolution of LSB galaxies). The star-formation histories of LSB galaxies represent a significant gap in our knowledge of galaxy assembly, with implications for dark matter / baryon feedback, IGM gas accretion, and the physics of star formation in low metallicity environments. Our program uses ground-based IFU spectra in tandem with space-based UV and IR imaging to determine the star-formation histories of LSB galaxies in a spatially resolved fashion. In this work we present the fitted history of our first target to demonstrate our techniques and methodology. Our technique splits the history of this galaxy into 15 semi-logarithmically spaced timesteps. Within each timestep the star-formation rate of each spaxel is assumed constant. We then determine the set of 15 star-formation rates that best recreate the spectra and photometry measured in each spaxel. Our main findings with respect to UGC 628 are: a) the visible properties of UGC 628 have varied over time, appearing as a high surface brightness spiral earlier than 8 Gyr ago and a starburst galaxy during a recent episode of star formation several tens of Myr ago, b) the central bar/core region was established early, around 8-10 Gyr ago, but has been largely inactive since, and c) star formation in the past 3 Gyr is best characterised as patchy and sporadic.

This paper describes version 2 of the OI Exchange Format (OIFITS), the standard for exchanging calibrated data from optical (visible/infrared) interferometers. This IAU-endorsed standard has been in use for 10 years at most of the past and current optical interferometer projects, including COAST, NPOI, IOTA, CHARA, VLTI, PTI and the Keck interferometer. Software is available for reading, writing and merging OI Exchange Format files. This version 2 provides definitions of additional data tables (e.g. for polarisation measurements), addressing the needs of future interferometric instruments. Also included are data columns for a more rigorous description of measurement errors and their correlations. In that, this document is a step towards the design of a common data model for optical interferometry. Finally, the main OIFITS header is expanded with several new keywords summarising the content to allow data base searches.

During the last two decades, the first generation of beam combiners at the Very Large Telescope Interferometer has proved the importance of optical interferometry for high-angular resolution astrophysical studies in the near- and mid-infrared. With the advent of 4-beam combiners at the VLTI, the u-v coverage per pointing increases significantly, providing an opportunity to use reconstructed images as powerful scientific tools. Therefore, interferometric imaging is already a key feature of the new generation of VLTI instruments, as well as for other interferometric facilities like CHARA and JWST. It is thus imperative to account for the current image reconstruction capabilities and their expected evolutions in the coming years. Here, we present a general overview of the current situation of optical interferometric image reconstruction with a focus on new wavelength-dependent information, highlighting its main advantages and limitations. As an Appendix we include several cookbooks describing the usage and installation of several state-of-the art image reconstruction packages. To illustrate the current capabilities of the software available to the community, we recovered chromatic images, from simulated MATISSE data, using the MCMC software SQUEEZE. With these images, we aim at showing the importance of selecting good regularization functions and their impact on the reconstruction.

The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially sensitive to thermal emission from young exoplanets (and their disks) with a high spectral resolution mode to probe the kinematics of CO and H2O gas. In this paper, we give an overview of the main science goals of PFI, define a baseline PFI architecture that can achieve those goals, point at remaining technical challenges, and suggest activities today that will help make the Planet Formation Imager facility a reality.

We examine the fraction of massive ($M_{*}>10^{10} M_{\odot}$), compact star-forming galaxies (cSFGs) that host an active galactic nucleus (AGN) at $z\sim2$. These cSFGs are likely the direct progenitors of the compact quiescent galaxies observed at this epoch, which are the first population of passive galaxies to appear in large numbers in the early Universe. We identify cSFGs that host an AGN using a combination of Hubble WFC3 imaging and Chandra X-ray observations in four fields: the Chandra Deep Fields, the Extended Groth Strip, and the UKIDSS Ultra Deep Survey field. We find that $39.2^{+3.9}_{-3.6}$\% (65/166) of cSFGs at $1.4<z<3.0$ host an X-ray detected AGN. This fraction is 3.2 times higher than the incidence of AGN in extended star-forming galaxies with similar masses at these redshifts. This difference is significant at the $6.2\sigma$ level. Our results are consistent with models in which cSFGs are formed through a dissipative contraction that triggers a compact starburst and concurrent growth of the central black hole. We also discuss our findings in the context of cosmological galaxy evolution simulations that require feedback energy to rapidly quench cSFGs. We show that the AGN fraction peaks precisely where energy injection is needed to reproduce the decline in the number density of cSFGs with redshift. Our results suggest that the first abundant population of massive, quenched galaxies emerged directly following a phase of elevated supermassive black hole growth and further hints at a possible connection between AGN and the rapid quenching of star formation in these galaxies.

This paper provides a general introduction to the problem of image reconstruction from interferometric data. A simple model of the interferometric observables is given and the issues arising from sparse Fourier data are discussed. The effects of various regularizations are described. In the proposed general framework, most existing algorithms can be understood. For an astronomer, such an understanding is crucial not only for selecting and using an algorithm but also to ensure correct interpretation of the resulting image.

We present new spatially resolved observations of MWC 349A from the Large Binocular Telescope Interferometer (LBTI), a 23-meter baseline interferometer made up of two, co-mounted 8-meter telescopes. MWC 349A is a B[e] star with an unknown evolutionary state. Proposed scenarios range from a young stellar object (YSO), to a B[e] supergiant, to a tight binary system. Radio continuum and recombination line observations of this source revealed a sub-arcsecond bipolar outflow surrounding a ~100 mas circumstellar disk. Followup infrared studies detected the disk, and suggested that it may have skew and an inner clearing. Our new infrared interferometric observations, which have more than twice the resolution of previously-published datasets, support the presence of both skew and a compact infrared excess. They rule out inner clearings with radii greater than ~14 mas. We show the improvements in disk parameter constraints provided by LBTI, and discuss the inferred disk parameters in the context of the posited evolutionary states for MWC 349A.

We present near-infrared interferometry of the carbon-rich asymptotic giant branch (AGB) star R Sculptoris. The visibility data indicate a broadly circular resolved stellar disk with a complex substructure. The observed AMBER squared visibility values show drops at the positions of CO and CN bands, indicating that these lines form in extended layers above the photosphere. The AMBER visibility values are best fit by a model without a wind. The PIONIER data are consistent with the same model. We obtain a Rosseland angular diameter of 8.9+-0.3 mas, corresponding to a Rosseland radius of 355+-55 Rsun, an effective temperature of 2640+-80 K, and a luminosity of log L/Lsun=3.74+-0.18. These parameters match evolutionary tracks of initial mass 1.5+-0.5 Msun and current mass 1.3+-0.7 Msun. The reconstructed PIONIER images exhibit a complex structure within the stellar disk including a dominant bright spot located at the western part of the stellar disk. The spot has an H-band peak intensity of 40% to 60% above the average intensity of the limb-darkening-corrected stellar disk. The contrast between the minimum and maximum intensity on the stellar disk is about 1:2.5. Our observations are broadly consistent with predictions by dynamic atmosphere and wind models, although models with wind appear to have a circumstellar envelope that is too extended compared to our observations. The detected complex structure within the stellar disk is most likely caused by giant convection cells, resulting in large-scale shock fronts, and their effects on clumpy molecule and dust formation seen against the photosphere at distances of 2-3 stellar radii.

The Planet Formation Imager (PFI) is a future kilometric-baseline infrared interferometer to image the complex physical processes of planet formation. Technologies that could be used to transport starlight to a central beam-combining laboratory in PFI include free-space propagation in air or vacuum, and optical fibres. This paper addresses the design and cost issues associated with free-space propagation in vacuum pipes. The signal losses due to diffraction over long differential paths are evaluated, and conceptual beam transport designs employing pupil management to ameliorate these losses are presented and discussed.

We present a description of a new instrument development, HARPS3, planned to be installed on an upgraded and roboticized Isaac Newton Telescope by end-2018. HARPS3 will be a high resolution (R = 115,000) echelle spectrograph with a wavelength range from 380-690 nm. It is being built as part of the Terra Hunting Experiment - a future 10 year radial velocity measurement programme to discover Earth-like exoplanets. The instrument design is based on the successful HARPS spectrograph on the 3.6m ESO telescope and HARPS-N on the TNG telescope. The main changes to the design in HARPS3 will be: a customised fibre adapter at the Cassegrain focus providing a stabilised beam feed and on-sky fibre diameter ~ 1.4 arcsec, the implementation of a new continuous flow cryostat to keep the CCD temperature very stable, detailed characterisation of the HARPS3 CCD to map the effective pixel positions and thus provide an improved accuracy wavelength solution, an optimised integrated polarimeter and the instrument integrated into a robotic operation. The robotic operation will optimise our programme which requires our target stars to be measured on a nightly basis. We present an overview of the entire project, including a description of our anticipated robotic operation.

The Planet Formation Imager (PFI) project aims to image the period of planet assembly directly, resolving structures as small as a giant planet's Hill sphere. These images will be required in order to determine the key mechanisms for planet formation at the time when processes of grain growth, protoplanet assembly, magnetic fields, disk/planet dynamical interactions and complex radiative transfer all interact - making some planetary systems habitable and others inhospitable. We will present the overall vision for the PFI concept, focusing on the key technologies and requirements that are needed to achieve the science goals. Based on these key requirements, we will define a cost envelope range for the design and highlight where the largest uncertainties lie at this conceptual stage.

The Planet Formation Imager (PFI) Project has formed a Technical Working Group (TWG) to explore possible facility architectures to meet the primary PFI science goal of imaging planet formation in situ in nearby star- forming regions. The goals of being sensitive to dust emission on solar system scales and resolving the Hill-sphere around forming giant planets can best be accomplished through sub-milliarcsecond imaging in the thermal infrared. Exploiting the 8-13 micron atmospheric window, a ground-based long-baseline interferometer with approximately 20 apertures including 10km baselines will have the necessary resolution to image structure down 0.1 milliarcseconds (0.014 AU) for T Tauri disks in Taurus. Even with large telescopes, this array will not have the sensitivity to directly track fringes in the mid-infrared for our prime targets and a fringe tracking system will be necessary in the near-infrared. While a heterodyne architecture using modern mid-IR laser comb technology remains a competitive option (especially for the intriguing 24 and 40{\mu}m atmospheric windows), the prioritization of 3-5{\mu}m observations of CO/H2O vibrotational levels by the PFI-Science Working Group (SWG) pushes the TWG to require vacuum pipe beam transport with potentially cooled optics. We present here a preliminary study of simulated L- and N-band PFI observations of a realistic 4-planet disk simulation, finding 21x2.5m PFI can easily detect the accreting protoplanets in both L and N-band but can see non-accreting planets only in L band. (abridged -- see PDF for full abstract)

We analyze a sample of 73 old long-period comets (LPCs) (orbital periods $200 < P < 1000$ yr) with perihelion distances $q < 2.5$ au, discovered in the period 1850-2014. We cloned the observed comets and also added fictitious LPCs with perihelia in the Jupiter's zone. We consider both a purely dynamical evolution and a physico-dynamical one with different physical lifetimes. We can fit the computed energy distribution of comets with $q < 1.3$ au to the observed one only within the energy range $0.01 < x < 0.04$ au$^{-1}$ (or periods $125 < P < 1000$ yr), where the "energy" is taken as the inverse of the semimajor axis $a$, namely $x \equiv 1/a$. The best results are obtained for physical lifetimes of about 200-300 revolutions (for a comet with a standard $q = 1$ au). We find that neither a purely dynamical evolution, nor a physico-dynamical one can reproduce the long tail of larger binding energies ($x \gsim 0.04$ au$^{-1}$) that correspond to most Halley-type comets (HTCs) and Jupiter-family comets. We conclude that most HTCs are not the end states of the evolution of LPCs, but come from a different source, a flattened one that we identify with the Centaurs that are scattered to the inner planetary region from the trans-Neptunian belt. These results also show that the boundary between LPCs and HTCs should be located at an energy $x \sim 0.04$ au$^{-1}$ ($P \sim 125$ yr), rather than the conventional classical boundary at $P = 200$ yr.

We introduce the MUSCEL Program (MUltiwavelength observations of the Structure, Chemistry and Evolution of LSB galaxies), a project aimed at determining the star-formation histories of low surface brightness galaxies. MUSCEL utilizes ground-based optical spectra and space-based UV and IR photometry to fully constrain the star-formation histories of our targets with the aim of shedding light on the processes that led low surface brightness galaxies down a different evolutionary path from that followed by high surface brightness galaxies, such as our Milky Way. Here we present the spatially-resolved optical spectra of UGC 628, observed with the VIRUS-P IFU at the 2.7-m Harlen J. Smith Telescope at the McDonald Observatory, and utilize emission-line diagnostics to determine the rate and distribution of star formation as well as the gas-phase metallicity and metallicity gradient. We find highly clustered star formation throughout UGC 628, excluding the core regions, and a log(O/H) metallicity around -4.2, with more metal rich regions near the edges of the galactic disk. Based on the emission-line diagnostics alone, the current mode of star formation, slow and concentrated in the outer disk, appears to have dominated for quite some time, although there are clear signs of a much older stellar population formed in a more standard inside-out fashion.

We measure the weak-lensing masses and galaxy distributions of four massive galaxy clusters observed during the Science Verification phase of the Dark Energy Survey. This pathfinder study is meant to 1) validate the DECam imager for the task of measuring weak-lensing shapes, and 2) utilize DECam's large field of view to map out the clusters and their environments over 90 arcmin. We conduct a series of rigorous tests on astrometry, photometry, image quality, PSF modeling, and shear measurement accuracy to single out flaws in the data and also to identify the optimal data processing steps and parameters. We find Science Verification data from DECam to be suitable for the lensing analysis described in this paper. The PSF is generally well-behaved, but the modeling is rendered difficult by a flux-dependent PSF width and ellipticity. We employ photometric redshifts to distinguish between foreground and background galaxies, and a red-sequence cluster finder to provide cluster richness estimates and cluster-galaxy distributions. By fitting NFW profiles to the clusters in this study, we determine weak-lensing masses that are in agreement with previous work. For Abell 3261, we provide the first estimates of redshift, weak-lensing mass, and richness. In addition, the cluster-galaxy distributions indicate the presence of filamentary structures attached to 1E 0657-56 and RXC J2248.7-4431, stretching out as far as 1 degree (approximately 20 Mpc), showcasing the potential of DECam and DES for detailed studies of degree-scale features on the sky.

We examine the UV reprocessing efficiencies of warm dust and polycyclic aromatic hydrocarbons (PAHs) through an analysis of the mid- and far-infrared surface luminosity densities of 85 nearby H$\alpha$-selected star-forming galaxies detected by the volume-limited KPNO International Spectroscopic Survey (KISS). Because H$\alpha$ selection is not biased toward continuum-bright objects, the KISS sample spans a wide range in stellar masses ($10^8$-$10^{12}\rm{M}_\odot$), as well as H$\alpha$ luminosity ($10^{39}$-$10^{43}\rm{ergs/s}$), mid-infrared 8.0$\mu$m luminosity ($10^{41}$-$10^{44}\rm{ergs/s}$), and [Bw-R] color (-.1-2.2). We find that mid-infrared polycyclic aromatic hydrocarbon (PAH) emission in the Spitzer IRAC 8.0$\mu$m band correlates with star formation, and that the efficiency with which galaxies reprocess UV energy into PAH emission depends on metallicity. We also find that the relationship between far-infrared luminosity in the Spitzer MIPS 24$\mu$m band pass and H$\alpha$-measured star-formation rate varies from galaxy to galaxy within our sample; we do not observe a metallicity dependence in this relationship. We use optical colors and established mass-to-light relationships to determine stellar masses for the KISS galaxies; we compare these masses to those of nearby galaxies as a confirmation that the volume-limited nature of KISS avoids strong biases. We also examine the relationship between IRAC 3.6$\mu$m luminosity and galaxy stellar mass, and find a color-dependent correlation between the two.

We present a weak lensing analysis of the cluster of galaxies RXC J2248.7-4431, a massive system at z=0.3475 with prominent strong lensing features covered by the HST/CLASH survey (Postman et al. 2012). Based on UBVRIZ imaging from the WFI camera at the MPG/ESO-2.2m telescope, we measure photometric redshifts and shapes of background galaxies. The cluster is detected as a mass peak at 5sigma significance. Its density can be parametrised as an NFW profile (Navarro et al. 1996) with two free parameters, the mass M_200m=(33.1+9.6-6.8)x10^14Msol and concentration c_200m=2.6+1.5-1.0. We discover a second cluster inside the field of view at a photometric redshift of z~0.6, with an NFW mass of M_200m=(4.0+3.7-2.6)x10^14Msol.

In 1839 Ebenezer Porter Mason (1819-1840) produced detailed drawings of the Omega Nebula (M17), the Trifid Nebula (M20) and the eastern part of the Veil Nebula (NGC 6992 and 6995). He used a 12-inch (30 cm) reflector that he and his friends had built at Yale College, which at the time was the largest telescope in the USA. The drawings were remarkable for their accuracy and for his adoption of a new technique for delineating gradients in nebulosity using isophotes, or lines of equal brightness. This paper reviews his life and his observations, comparing his results with those of the modern amateur astronomer.

We present a study of the morphology and intensity of star formation in the host galaxies of eight Palomar-Green quasars using observations with the Hubble Space Telescope. Our observations are motivated by recent evidence for a close relationship between black hole growth and the stellar mass evolution in its host galaxy. We use narrow-band [O II] $\lambda$3727, H$\beta$, [O III] $\lambda$5007 and Pa$\alpha$ images, taken with the WFPC2 and NICMOS instruments, to map the morphology of line-emitting regions, and, after extinction corrections, diagnose the excitation mechanism and infer star-formation rates. Significant challenges in this type of work are the separation of the quasar light from the stellar continuum and the quasar-excited gas from the star-forming regions. To this end, we present a novel technique for image decomposition and subtraction of quasar light. Our primary result is the detection of extended line-emitting regions with sizes ranging from 0.5 to 5 kpc and distributed symmetrically around the nucleus, powered primarily by star formation. We determine star-formation rates of order a few tens of M$_\odot$/yr. The host galaxies of our target quasars have stellar masses of order $10^{11}$ M$_\odot$ and specific star formation rates on a par with those of M82 and luminous infrared galaxies. As such they fall at the upper envelope or just above the star-formation mass sequence in the specific star formation vs stellar mass diagram. We see a clear trend of increasing star formation rate with quasar luminosity, reinforcing the link between the growth of the stellar mass of the host and the black hole mass found by other authors.

We describe the scientific motivation for and conceptual design of the Magdalena Ridge Observatory Interferometer, an imaging interferometer designed to operate at visible and near-infrared wavelengths. The rationale for the major technical decisions in the interferometer design is discussed, the success of the concept is appraised, and the implications of this analysis for the design of future arrays are drawn out.

In this paper we present results from the weak lensing shape measurement GRavitational lEnsing Accuracy Testing 2010 (GREAT10) Galaxy Challenge. This marks an order of magnitude step change in the level of scrutiny employed in weak lensing shape measurement analysis. We provide descriptions of each method tested and include 10 evaluation metrics over 24 simulation branches. GREAT10 was the first shape measurement challenge to include variable fields; both the shear field and the Point Spread Function (PSF) vary across the images in a realistic manner. The variable fields enable a variety of metrics that are inaccessible to constant shear simulations including a direct measure of the impact of shape measurement inaccuracies, and the impact of PSF size and ellipticity, on the shear power spectrum. To assess the impact of shape measurement bias for cosmic shear we present a general pseudo-Cl formalism, that propagates spatially varying systematics in cosmic shear through to power spectrum estimates. We also show how one-point estimators of bias can be extracted from variable shear simulations. The GREAT10 Galaxy Challenge received 95 submissions and saw a factor of 3 improvement in the accuracy achieved by shape measurement methods. The best methods achieve sub-percent average biases. We find a strong dependence in accuracy as a function of signal-to-noise, and indications of a weak dependence on galaxy type and size. Some requirements for the most ambitious cosmic shear experiments are met above a signal-to-noise ratio of 20. These results have the caveat that the simulated PSF was a ground-based PSF. Our results are a snapshot of the accuracy of current shape measurement methods and are a benchmark upon which improvement can continue. This provides a foundation for a better understanding of the strengths and limitations of shape measurement methods.

We present the results of the fifth Interferometric Imaging Beauty Contest. The contest consists in blind imaging of test data sets derived from model sources and distributed in the OIFITS format. Two scenarios of imaging with CHARA/MIRC-6T were offered for reconstruction: imaging a T Tauri disc and imaging a spotted red supergiant. There were eight different teams competing this time: Monnier with the software package MACIM; Hofmann, Schertl and Weigelt with IRS; Thi\'ebaut and Soulez with MiRA ; Young with BSMEM; Mary and Vannier with MIROIRS; Millour and Vannier with independent BSMEM and MiRA entries; Rengaswamy with an original method; and Elias with the radio-astronomy package CASA. The contest model images, the data delivered to the contestants and the rules are described as well as the results of the image reconstruction obtained by each method. These results are discussed as well as the strengths and limitations of each algorithm.

The number of publications of aperture-synthesis images based on optical long-baseline interferometry measurements has recently increased due to easier access to visible and infrared interferometers. The interferometry technique has now reached a technical maturity level that opens new avenues for numerous astrophysical topics requiring milli-arcsecond model-independent imaging. In writing this paper our motivation was twofold: 1) review and publicize emblematic excerpts of the impressive corpus accumulated in the field of optical interferometry image reconstruction; 2) discuss future prospects for this technique by selecting four representative astrophysical science cases in order to review the potential benefits of using optical long baseline interferometers. For this second goal we have simulated interferometric data from those selected astrophysical environments and used state-of-the-art codes to provide the reconstructed images that are reachable with current or soon-to-be facilities. The image reconstruction process was "blind" in the sense that reconstructors had no knowledge of the input brightness distributions. We discuss the impact of optical interferometry in those four astrophysical fields. We show that image reconstruction software successfully provides accurate morphological information on a variety of astrophysical topics and review the current strengths and weaknesses of such reconstructions. We investigate how to improve image reconstruction and the quality of the image possibly by upgrading the current facilities. We finally argue that optical interferometers and their corresponding instrumentation, existing or to come, with 6 to 10 telescopes, should be well suited to provide images of complex sceneries.

We present the results of the fourth Optical/IR Interferometry Imaging Beauty Contest. The contest consists of blind imaging of test data sets derived from model sources and distributed in the OI-FITS format. The test data consists of spectral data sets on an object "observed" in the infrared with spectral resolution. There were 4 different algorithms competing this time: BSMEM the Bispectrum Maximum Entropy Method by Young, Baron & Buscher; RPR the Recursive Phase Reconstruction by Rengaswamy; SQUEEZE a Markov Chain Monte Carlo algorithm by Baron, Monnier & Kloppenborg; and, WISARD the Weak-phase Interferometric Sample Alternating Reconstruction Device by Vannier & Mugnier. The contest model image, the data delivered to the contestants and the rules are described as well as the results of the image reconstruction obtained by each method. These results are discussed as well as the strengths and limitations of each algorithm.

Context. The red supergiant (RSG) Betelgeuse is an irregular variable star. Convection may play an important role in understanding this variability. Interferometric observations can be interpreted using sophisticated simulations of stellar convection. Aims. We compare the visibility curves and closure phases obtained from our 3D simulation of RSG convection with CO5BOLD to various interferometric observations of Betelgeuse from the optical to the H band in order to characterize and measure the convection pattern on this star. Methods. We use 3D radiative-hydrodynamics (RHD) simulation to compute intensity maps in different filters and we thus derive interferometric observables using the post-processing radiative transfer code OPTIM3D. The synthetic visibility curves and closure phases are compared to observations. Results. We provide a robust detection of the granulation pattern on the surface of Betelgeuse in the optical and in the H band based on excellent fits to the observed visibility points and closure phases. Moreover, we determine that the Betelgeuse surface in the H band is covered by small to medium scale (5-15 mas) convection-related surface structures and a large (30 mas) convective cell. In this spectral region, H2O molecules are the main absorbers and contribute to the small structures and to the position of the first null of the visibility curve (i.e. the apparent stellar radius).

The handful of low-mass, late-type galaxies that comprise Hickson Compact Group 31 is in the midst of complex, ongoing gravitational interactions, evocative of the process of hierarchical structure formation at higher redshifts. With sensitive, multicolor Hubble Space Telescope imaging, we characterize the large population of <10 Myr old star clusters that suffuse the system. From the colors and luminosities of the young star clusters, we find that the galaxies in HCG 31 follow the same universal scaling relations as actively star-forming galaxies in the local Universe despite the unusual compact group environment. Furthermore, the specific frequency of the globular cluster system is consistent with the low end of galaxies of comparable masses locally. This, combined with the large mass of neutral hydrogen and tight constraints on the amount of intragroup light, indicate that the group is undergoing its first epoch of interaction-induced star formation. In both the main galaxies and the tidal-dwarf candidate, F, stellar complexes, which are sensitive to the magnitude of disk turbulence, have both sizes and masses more characteristic of z=1-2 galaxies. After subtracting the light from compact sources, we find no evidence for an underlying old stellar population in F -- it appears to be a truly new structure. The low velocity dispersion of the system components, available reservoir of HI, and current star formation rate of ~10 solar masses per year, indicate that HCG31 is likely to both exhaust its cold gas supply and merge within ~1 Gyr. We conclude that the end product will be an isolated, X-ray-faint, low-mass elliptical.

We have performed an On-The-Fly (OTF) mapping survey of ${\rm ^{12}{CO(J=1-0)}}$ emission in 28 Virgo cluster spiral galaxies using the Five College Radio Astronomy Observatory (FCRAO) 14-m telescope. This survey aims to characterize the CO distribution, kinematics, and luminosity of a large sample of galaxies covering the full extents of stellar disks, rather than sampling only the inner disks or the major axis as was done by many previous single dish and interferometric CO surveys. CO emission is detected in 20 galaxies among the 28 Virgo spirals observed. An atlas consisting of global measures, radial measures, and maps, is presented for each detected galaxy. A note summarizing the CO data is also presented along with relevant information from the literature. The CO properties derived from our OTF observations are presented and compared with the results from the FCRAO Extragalactic CO Survey by Young et al. (1995) which utilized position-switching observations along the major axis and a model fitting method. We find that our OTF derived CO properties agree well with the Young et al. results in many cases, but the Young et al. measurements are larger by a factor of 1.4 - 2.4 for seven (out of 18) cases. We will explore further the possible causes for the discrepancy in the analysis paper currently under preparation.

Context. The star HD 87643, exhibiting the "B[e] phenomenon", has one of the most extreme infrared excesses for this object class. It harbours a large amount of both hot and cold dust, and is surrounded by an extended reflection nebula. Aims. One of our major goals was to investigate the presence of a companion in HD87643. In addition, the presence of close dusty material was tested through a combination of multi-wavelength high spatial 5Aresolution observations. Methods. We observed HD 87643 with high spatial resolution techniques, using the near-IR AMBER/VLTI interferometer with baselines ranging from 60 m to 130 m and the mid-IR MIDI/VLTI interferometer with baselines ranging from 25 m to 65 m. These observations are complemented by NACO/VLT adaptive-optics-corrected images in the K and L-bands, ESO-2.2m optical Wide-Field Imager large-scale images in the B, V and R-bands, Results. We report the direct detection of a companion to HD 87643 by means of image synthesis using the AMBER/VLTI instrument. The presence of the companion is confirmed by the MIDI and NACO data, although with a lower confidence. The companion is separated by ~ 34 mas with a roughly north-south orientation. The period must be large (several tens of years) and hence the orbital parameters are not determined yet. Binarity with high eccentricity might be the key to interpreting the extreme characteristics of this system, namely a dusty circumstellar envelope around the primary, a compact dust nebulosity around the binary system and a complex extended nebula witnessing past violent ejections.

We have run two completely independent weak lensing analysis pipelines on a set of realistic simulated images of a massive galaxy cluster with a singular isothermal sphere profile (galaxy velocity dispersion sigma_v=1250 km/ sec). The suite of images was constructed using the simulation tools developed by the Dark Energy Survey. We find that both weak lensing pipelines can accurately recover the velocity dispersion of our simulated clusters, suggesting that current weak lensing tools are accurate enough for measuring the shear profile of massive clusters in upcoming large photometric surveys. We also demonstrate how choices of some cuts influence the final shear profile and sigma_v measurement. Analogously to the STEP program, we make all of these cluster simulation images publically available for other groups to analyze through their own weak lensing pipelines.

We identify a sample of 74 high-redshift quasars (z>3) with weak emission lines from the Fifth Data Release of the Sloan Digital Sky Survey and present infrared, optical, and radio observations of a subsample of four objects at z>4. These weak emission-line quasars (WLQs) constitute a prominent tail of the Lya+NV equivalent width distribution, and we compare them to quasars with more typical emission-line properties and to low-redshift active galactic nuclei with weak/absent emission lines, namely BL Lac objects. We find that WLQs exhibit hot (T~1000 K) thermal dust emission and have rest-frame 0.1-5 micron spectral energy distributions that are quite similar to those of normal quasars. The variability, polarization, and radio properties of WLQs are also different from those of BL Lacs, making continuum boosting by a relativistic jet an unlikely physical interpretation. The most probable scenario for WLQs involves broad-line region properties that are physically distinct from those of normal quasars.

Classically, optical and near-infrared interferometry have relied on closure phase techniques to produce images. Such techniques allow us to achieve modest dynamic ranges. In order to test the feasibility of next generation optical interferometers in the context of the VLTI-spectro-imager (VSI), we have embarked on a study of image reconstruction and analysis. Our main aim was to test the influence of the number of telescopes, observing nights and distribution of the visibility points on the quality of the reconstructed images. Our results show that observations using six Auxiliary Telescopes (ATs) during one complete night yield the best results in general and is critical in most science cases; the number of telescopes is the determining factor in the image reconstruction outcome. In terms of imaging capabilities, an optical, six telescope VLTI-type configuration and ~200 meter baseline will achieve 4 mas spatial resolution, which is comparable to ALMA and almost 50 times better than JWST will achieve at 2.2 microns. Our results show that such an instrument will be capable of imaging, with unprecedented detail, a plethora of sources, ranging from complex stellar surfaces to microlensing events.

One of the aims of next generation optical interferometric instrumentation is to be able to make use of information contained in the visibility phase to construct high dynamic range images. Radio and optical interferometry are at the two extremes of phase corruption by the atmosphere. While in radio it is possible to obtain calibrated phases for the science objects, in the optical this is currently not possible. Instead, optical interferometry has relied on closure phase techniques to produce images. Such techniques allow only to achieve modest dynamic ranges. However, with high contrast objects, for faint targets or when structure detail is needed, phase referencing techniques as used in radio interferometry, should theoretically achieve higher dynamic ranges for the same number of telescopes. Our approach is not to provide evidence either for or against the hypothesis that phase referenced imaging gives better dynamic range than closure phase imaging. Instead we wish to explore the potential of this technique for future optical interferometry and also because image reconstruction in the optical using phase referencing techniques has only been performed with limited success. We have generated simulated, noisy, complex visibility data, analogous to the signal produced in radio interferometers, using the VLTI as a template. We proceeded with image reconstruction using the radio image reconstruction algorithms contained in AIPS IMAGR (CLEAN algorithm). Our results show that image reconstruction is successful in most of our science cases, yielding images with a 4 milliarcsecond resolution in K band. (abridged)

The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolution from R= 100 to 12000; and d) internal fringe tracking on-axis, or off-axis when associated to the PRIMA dual-beam facility. The concept of VSI consists on 6 sub-systems: a common path distributing the light between the fringe tracker and the scientific instrument, the fringe tracker ensuring the co-phasing of the array, the scientific instrument delivering the interferometric observables and a calibration tool providing sources for internal alignment and interferometric calibrations. The two remaining sub-systems are the control system and the observation support software dedicated to the reduction of the interferometric data. This paper presents the global concept of VSI science path including the common path, the scientific instrument and the calibration tool. The scientific combination using a set of integrated optics multi-way beam combiners to provide high-stability visibility and closure phase measurements are also described. Finally we will address the performance budget of the global VSI instrument. The fringe tracker and scientific spectrograph will be shortly described.

Fringe tracking in interferometers is typically analyzed with the implicit assumption that there is a single phase associated with each telescope in the array. If the telescopes have apertures significantly larger than r0 and only partial adaptive optics correction, then the phase measured by a fringe sensor may differ significantly from the "piston" component of the aperture phase. In some cases, speckle noise will cause "branch points" in the measured phase as a function of time, causing large and sudden jumps in the phase. We present simulations showing these effects in order to understand their implications for the design of fringe tracking algorithms.

The implementation of the simultaneous combination of several telescopes (from four to eight) available at Very Large Telescope Interferometer (VLTI) will allow the new generation interferometric instrumentation to achieve interferometric image synthesis with unprecedented resolution and efficiency. The VLTI Spectro Imager (VSI) is the proposed second-generation near-infrared multi-beam instrument for the Very Large Telescope Interferometer, featuring three band operations (J, H and K), high angular resolutions (down to 1.1 milliarcsecond) and high spectral resolutions. VSI will be equipped with its own internal Fringe Tracker (FT), which will measure and compensate the atmospheric perturbations to the relative beam phase, and in turn will provide stable and prolonged observing conditions down to the magnitude K=13 for the scientific combiner. In its baseline configuration, VSI FT is designed to implement, from the very start, the minimum redundancy combination in a nearest neighbor scheme of six telescopes over six baselines, thus offering better options for rejection of large intensity or phase fluctuations over each beam, due to the symmetric set-up. The planar geometry solution of the FT beam combiner is devised to be easily scalable either to four or eight telescopes, in accordance to the three phase development considered for VSI. The proposed design, based on minimum redundancy combination and bulk optics solution, is described in terms of opto-mechanical concept, performance and key operational aspects.

The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity for breakthroughs in many areas of astrophysic including: probing the initial conditions for planet formation in the AU-scale environments of young stars; imaging convective cells and other phenomena on the surfaces of stars; mapping the chemical and physical environments of evolved stars, stellar remnants, and stellar winds; and disentangling the central regions of active galactic nuclei and supermassive black holes. VSI will provide these new capabilities using technologies which have been extensively tested in the past and VSI requires little in terms of new infrastructure on the VLTI. At the same time, VSI will be able to make maximum use of new infrastructure as it becomes available; for example, by combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the measurement of up to 28 visibilities in every wavelength channel within a few minutes. The current studies are focused on a 4-telescope version with an upgrade to a 6-telescope one. The instrument contains its own fringe tracker and tip-tilt control in order to reduce the constraints on the VLTI infrastructure and maximize the scientific return.

Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and spectral scales in the near-infrared domain. This instrument will provide information complementary to what is obtained at the same time with ALMA at different wavelengths and the extreme large telescopes.

We present the discovery of seven quasars at z>5.7, selected from ~2000 deg^2 of multicolor imaging data of the Sloan Digital Sky Survey (SDSS). The new quasars have redshifts z from 5.79 to 6.13. Five are selected as part of a complete flux-limited sample in the SDSS Northern Galactic Cap; two have larger photometric errors and are not part of the complete sample. One of the new quasars, SDSS J1335+3533 (z=5.93), exhibits no emission lines; the 3-sigma limit on the rest-frame equivalent width of Ly alpha+NV line is 5 A. It is the highest redshift lineless quasar known, and could be a gravitational lensed galaxy, a BL Lac object or a new type of quasar. Two new z>6 quasars, SDSS 1250+3130 (z=6.13) and SDSS J1137+3549 (z=6.01), show deep Gunn-Peterson absorption gaps in Ly alpha. These gaps are narrower the complete Gunn-Peterson absorption troughs observed among quasars at z>6.2 and do not have complete Ly beta absorption.

This paper describes the OI Exchange Format, a standard for exchanging calibrated data from optical (visible/infrared) stellar interferometers. The standard is based on the Flexible Image Transport System (FITS), and supports storage of the optical interferometric observables including squared visibility and closure phase -- data products not included in radio interferometry standards such as UV-FITS. The format has already gained the support of most currently-operating optical interferometer projects, including COAST, NPOI, IOTA, CHARA, VLTI, PTI, and the Keck Interferometer, and is endorsed by the IAU Working Group on Optical Interferometry. Software is available for reading, writing and merging OI Exchange Format files.

We present the discovery of five new quasars at z>5.7, selected from the multicolor imaging data of the Sloan Digital Sky Survey (SDSS). Three of them, at redshifts 5.93, 6.07, and 6.22, were selected from ~1700 deg^2 of new SDSS Main Survey imaging in the Northern Galactic Cap. An additional quasar, at redshift 5.85, was discovered by coadding the data obtained in the Fall Equatorial Stripe in the SDSS Southern Survey Region. The fifth object, at redshift 5.80, is selected from a non-standard SDSS scan in the Southern Galactic Cap outside the Main Survey area. The spectrum of SDSS J162331.81+311200.5 (z=6.22) shows a complete Gunn-Peterson trough at z_abs > 5.95, similar to the troughs detected in other three z>6.2 quasars known. We present a composite spectrum of the z>5.7 quasars discovered in the SDSS to date. The average emission line and continuum properties of z~6 quasars exhibit no significant evolution compared to those at low redshift. Using a complete sample of nine z>5.7 quasars, we find that the density of quasars with M_1450 < -26.7 at z~6 is (6+/-2) x 10^-10 per Mpc^3 consistent with our previous estimates. The luminosity distribution of the sample is fit with a power law luminosity function Psi(L) ~ L^(-3.2+/-0.7), somewhat steeper than but consistent with our previous estimates.

The relationship between the star formation rate and surface density of neutral gas within the disk of M33 is examined with new imaging observations of CO J=1-0 emission gathered with the FCRAO 14m telescope and IRAS HiRes images of the 60 micron and 100 micron emission. The Schmidt law, Sigma_SFR ~ Sigma_gas^n, is constructed using radial profiles of the HI 21cm, CO, and far infrared emission. A strong correlation is identified between the star formation rate and molecular gas surface density. This suggests that the condensation of giant molecular clouds is the limiting step to star formation within the M33 disk. The corresponding molecular Schmidt index, n_{mol}, is 1.36 +/- 0.08. The star formation rate has a steep dependence on total mass gas surface density, (Sigma_{HI}+Sigma_{H_2}), owing to the shallow radial profile of the atomic gas which dominates the total gas surface density for most radii. The disk pressure of the gas is shown to play a prominent role in regulating the molecular gas fraction in M33.

We derive a non-parametric CO luminosity function using a FIR and an optical B-band selected sample of the galaxies included in the FCRAO Extragalactic CO Survey. The FIR selected sample is defined using the IRAS Bright Galaxy Surveys (BGS; IRAS 60 micron flux density >= 5.24 Jy). Although our CO sample is not complete, the normalization using the BGS reproduces the IRAS 60 micron luminosity function in excellent agreement with those found in the literature. Similarly, a B-band selected sample defined using the Revised Shapley-Ames (RSA) catalog is used to derive a CO luminosity function for a comparison. A Schechter function describes the both derived CO luminosity functions reasonably well. Adopting the standard CO-to-H2 conversion factor, we derive a molecular gas density of rho_{H2}=(3.1\pm 1.2)*10^7h Mo Mpc^{-3} for the local volume. Combining with the measurements of the local HI mass density and the helium contribution, we estimate that the total mass density of cold neutral gas in the local universe is Omega_{gas} =(4.3 \pm 1.1)*10^{-4} h^{-1}, which is about 20% of the total stellar mass density Omega_{stars}.

Narrow-band Halpha and broadband R images and radial profiles are presented for 63 bright spiral galaxies in the Virgo Cluster. The sample is complete for Sb-Scd galaxies with B magnitude less than 12 and inclination less than 75 degrees. Isophotal radii, disk scalelengths, concentration parameters, and integrated fluxes are derived for the sample galaxies.

We present spectra of the extended 12CO and 13CO J=1-0 emission along the major axes of 17 nearby galaxies. Spatial variations in the ratio of CO and 13CO integrated intensities, R, are found in nearly every galaxy observed. There is an overall variation in R of 20-40% from the inner 2 kpc to the disk. Roughly a third of the survey galaxies have such gradients in R detected above the 2-sigma confidence level. Though some galaxies show a lower central value of R, on average R inside 2 kpc is 10-30% higher than R outside of 2 kpc. An increase in the CO/13CO intensity ratio from disk to nucleus may imply that the conversion factor between CO intensity and H2 column density, X, is lower in galactic nuclei. Also variations in physical conditions, most notably the gas kinetic temperature, affect both R and X. Abundance variations probably do not cause the gradient in R, though we do not rule out a decrease in effective cloud column densities in galactic nuclei possibly caused by destructive starburst superwinds. A modest rise in temperature (less than a factor of 2 or 3) from outside a 2 kpc radius towards the nucleus can easily account for the observed gradient. These results support previous work implying that X is lower in the center of the Milky Way and probably most galactic nuclei. Therefore calculating H2 masses using the standard Galactic X-factor, especially within the central few kpc of galaxies, overestimates the true mass by factors of a few. The standard X-factor still appears to be appropriate for galactic disks.