We show that the current sensitivities of direct detection experiments have already reached the interesting parameter space of freeze-in dark matter models if the dark sector is in the inelastic dark matter framework and the excited dark matter state is cosmologically stable. Using results recently presented by the XENON1T experiment, we present constraints on these models. We also show that these models can explain the reported excess in the electron recoil signals if the mass gap between the ground state and the excited state is at keV scale.

We construct the chiral radiation transport equation for left-handed neutrinos in the context of radiation hydrodynamics for core-collapse supernovae. Based on the chiral kinetic theory incorporating quantum corrections due to the chirality of fermions, we derive a general relativistic form of the chiral transfer equation with collisions. We show that such quantum corrections explicitly break the spherical symmetry and axisymmetry of the system. In the inertial frame, in particular, we find that the so-called side jump leads to quantum corrections in the collisions between neutrinos and matter. We also derive analytic forms of such corrections in the emission and absorption rates for the neutrino absorption process. These corrections result in the generation of kinetic helicity and cross helicity of matter, which should then modify the subsequent evolution of matter. This theoretical framework can be applied to investigate the impacts of the chirality of neutrinos on the evolution of core-collapse supernovae.

Observations of ultra-diffuse galaxies NGC1052-DF2 and -DF4 show they contain little dark matter, challenging our understanding of galaxy formation. Using controlled N-body simulations, we explore the possibility to reproduce their properties through tidal stripping from elliptical galaxy NGC1052, in both cold dark matter (CDM) and self-interacting dark matter (SIDM) scenarios. To explain the dark matter deficiency, we find that a CDM halo must have a very low concentration so that it can lose sufficient mass in the tides. In contrast, SIDM favors a higher and more reasonable concentration as core formation enhances tidal mass loss. Stellar distributions in our SIDM benchmarks are more diffuse than CDM one, and hence the former provide a better match to the data. We further show that the presence of stellar particles is critical for preventing the halos from being totally disrupted and discuss its implications. Our results indicate that the dark matter-deficient galaxies may provide important tests for the nature of dark matter.

The Gamma-Ray Integrated Detectors (GRID) is a space mission concept dedicated to monitoring the transient gamma-ray sky in the energy range from 10 keV to 2 MeV using scintillation detectors onboard CubeSats in low Earth orbits. The primary targets of GRID are the gamma-ray bursts (GRBs) in the local universe. The scientific goal of GRID is, in synergy with ground-based gravitational wave (GW) detectors such as LIGO and VIRGO, to accumulate a sample of GRBs associated with the merger of two compact stars and study jets and related physics of those objects. It also involves observing and studying other gamma-ray transients such as long GRBs, soft gamma-ray repeaters, terrestrial gamma-ray flashes, and solar flares. With multiple CubeSats in various orbits, GRID is unaffected by the Earth occultation and serves as a full-time and all-sky monitor. Assuming a horizon of 200 Mpc for ground-based GW detectors, we expect to see a few associated GW-GRB events per year. With about 10 CubeSats in operation, GRID is capable of localizing a faint GRB like 170817A with a 90% error radius of about 10 degrees, through triangulation and flux modulation. GRID is proposed and developed by students, with considerable contribution from undergraduate students, and will remain operated as a student project in the future. The current GRID collaboration involves more than 20 institutes and keeps growing. On August 29th, the first GRID detector onboard a CubeSat was launched into a Sun-synchronous orbit and is currently under test.

This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an important role in answering the other top-level science questions of Solar Orbiter, as well as hosting the potential of a rich return in further science. SO/PHI measures the Zeeman effect and the Doppler shift in the FeI 617.3nm spectral line. To this end, the instrument carries out narrow-band imaging spectro-polarimetry using a tunable LiNbO_3 Fabry-Perot etalon, while the polarisation modulation is done with liquid crystal variable retarders (LCVRs). The line and the nearby continuum are sampled at six wavelength points and the data are recorded by a 2kx2k CMOS detector. To save valuable telemetry, the raw data are reduced on board, including being inverted under the assumption of a Milne-Eddington atmosphere, although simpler reduction methods are also available on board. SO/PHI is composed of two telescopes; one, the Full Disc Telescope (FDT), covers the full solar disc at all phases of the orbit, while the other, the High Resolution Telescope (HRT), can resolve structures as small as 200km on the Sun at closest perihelion. The high heat load generated through proximity to the Sun is greatly reduced by the multilayer-coated entrance windows to the two telescopes that allow less than 4% of the total sunlight to enter the instrument, most of it in a narrow wavelength band around the chosen spectral line.

The gas pixel detector (GPD) is designed and developed for high-sensitivity astronomical X-ray polarimetry, which is a new window about to open in a few years. Due to the small mass, low power, and compact geometry of the GPD, we propose a CubeSat mission Polarimeter Light (PolarLight) to demonstrate and test the technology directly in space. There is no optics but a collimator to constrain the field of view to 2.3 degrees. Filled with pure dimethyl ether (DME) at 0.8 atm and sealed by a beryllium window of 100 micron thick, with a sensitive area of about 1.4 mm by 1.4 mm, PolarLight allows us to observe the brightest X-ray sources on the sky, with a count rate of, e.g., ~0.2 counts/s from the Crab nebula. The PolarLight is 1U in size and mounted in a 6U CubeSat, which was launched into a low Earth Sun-synchronous orbit on October 29, 2018, and is currently under test. More launches with improved designs are planned in 2019. These tests will help increase the technology readiness for future missions such as the enhanced X-ray Timing and Polarimetry (eXTP), better understand the orbital background, and may help constrain the physics with observations of the brightest objects.

Helioseismic holography is an imaging technique used to study heterogeneities and flows in the solar interior from observations of solar oscillations at the surface. Holograms contain noise due to the stochastic nature of solar oscillations. We provide a theoretical framework for modeling signal and noise in Porter-Bojarski helioseismic holography. The wave equation may be recast into a Helmholtz-like equation, so as to connect with the acoustics literature and define the holography Green's function in a meaningful way. Sources of wave excitation are assumed to be stationary, horizontally homogeneous, and spatially uncorrelated. Using the first Born approximation we calculate holograms in the presence of perturbations in sound-speed, density, flows, and source covariance, as well as the noise level as a function of position. This work is a direct extension of the methods used in time-distance helioseismology to model signal and noise. To illustrate the theory, we compute the hologram intensity numerically for a buried sound-speed perturbation at different depths in the solar interior. The reference Green's function is obtained for a spherically-symmetric solar model using a finite-element solver in the frequency domain. Below the pupil area on the surface, we find that the spatial resolution of the hologram intensity is very close to half the local wavelength. For a sound-speed perturbation of size comparable to the local spatial resolution, the signal-to-noise ratio is approximately constant with depth. Averaging the hologram intensity over a number $N$ of frequencies above 3 mHz increases the signal-to-noise ratio by a factor nearly equal to the square root of $N$. This may not be the case at lower frequencies, where large variations in the holographic signal are due to the individual contributions of the long-lived modes of oscillation.

Helioseismic holography is a powerful technique used to probe the solar interior based on estimations of the 3D wavefield. Porter--Bojarski holography, which is a well-established method used in acoustics to recover sources and scatterers in 3D, is also an estimation of the wavefield, and hence it has the potential to be applied to helioseismology. Here we present a proof of concept study, where we compare helioseismic holography and Porter--Bojarski holography under the assumption that the waves propagate in a homogeneous medium. We consider the problem of locating a point source of wave excitation inside a sphere. Under these assumptions, we find that the two imaging methods have the same capability of locating the source, with the exception that helioseismic holography suffers from "ghost images" (i.e., artificial peaks away from the source location). We conclude that Porter--Bojarski holography may improve the current method used in helioseismology.

The Large sky Area Multi-Object Spectroscopic Telescope (LAMOST) General Survey is a spectroscopic survey that will eventually cover approximately half of the celestial sphere and collect 10 million spectra of stars, galaxies and QSOs. Objects both in the pilot survey and the first year general survey are included in the LAMOST First Data Release (DR1). The pilot survey started in October 2011 and ended in June 2012, and the data have been released to the public as the LAMOST Pilot Data Release in August 2012. The general survey started in September 2012, and completed its first year of operation in June 2013. The LAMOST DR1 includes a total of 1202 plates containing 2,955,336 spectra, of which 1,790,879 spectra have observed signal-to-noise S/N >10. All data with S/N>2 are formally released as LAMOST DR1 under the LAMOST data policy. This data release contains a total of 2,204,696 spectra, of which 1,944,329 are stellar spectra, 12,082 are galaxy spectra and 5,017 are quasars. The DR1 includes not only spectra, but also three stellar catalogues with measured parameters: AFGK-type stars with high quality spectra (1,061,918 entries), A-type stars (100,073 entries), and M stars (121,522 entries). This paper introduces the survey design, the observational and instrumental limitations, data reduction and analysis, and some caveats. Description of the FITS structure of spectral files and parameter catalogues is also provided.

The DAMPE (DArk Matter Particle Explorer) is a scientific satellite being developed in China, aimed at cosmic ray study, gamma ray astronomy, and searching for the clue of dark matter particles, with a planned mission period of more than 3 years and an orbit altitude of about 500 km. The BGO Calorimeter, which consists of 308 BGO (Bismuth Germanate Oxid) crystal bars, 616 PMTs (photomultiplier tubes) and 1848 dynode signals, has approximately 32 radiation lengths. It is a crucial sub-detector of the DAMPE payload, with the functions of precisely measuring the energy of cosmic particles from 5 GeV to 10TeV, distinguishing positrons/electrons and gamma rays from hadron background, and providing trigger information for the whole DAMPE payload. The dynamic range for a single BGO crystal is about 2?105 and there are 1848 detector signals in total. To build such an instrument in space, the major design challenges for the readout electronics come from the large dynamic range, the high integrity inside the very compact structure, the strict power supply budget and the long term reliability to survive the hush environment during launch and in orbit. Currently the DAMPE mission is in the end of QM (Qualification Model) stage. This paper presents a detailed description of the readout electronics for the BGO calorimeter.

Active reflector is one of the key technologies for constructing large telescopes, especially for the millimeter/sub-millimeter radio telescopes. This article introduces a new efficient laser angle metrology system for the active reflector antenna of the large radio telescopes, with a plenty of active reflector experiments mainly about the detecting precisions and the maintaining of the surface shape in real time, on the 65-meter radio telescope prototype constructed by Nanjing Institute of Astronomical Optics and Technology (NIAOT). The test results indicate that the accuracy of the surface shape segmenting and maintaining is up to micron dimension, and the time-response can be of the order of minutes. Therefore, it is proved to be workable for the sub-millimeter radio telescopes.

We report on the rare eruption of a miniature H_alpha filament that took a surge form. The filament first underwent a full development within 46 minutes and then began to erupt 9 minutes later, followed by a compact, impulsive X-ray class M2.2 flare with a two ribbon nature only at the early eruption phase. During the eruption, its top rose, whereas the two legs remained rooted in the chromosphere and swelled little perpendicular to the rising direction. This led to a surge-like eruption with a narrow angular extent. Similar to the recent observations for standard and blowout X-ray jets by Moore et al., we thus define it as a "blowout H_alpha surge". Furthermore, our observations showed that the eruption was associated with (1) a coronal mass ejection guided by a preexisting streamer, (2) abrupt, significant, and persistent changes in the photospheric magnetic field around the filament, and (3) sudden disappearance of a small pore. These observations thus provide evidence that blowout surge is a small-scale version of large-scale filament eruption in many aspects. Our observations further suggest that at least part of H_alpha surges belong to blowout-type ones, and exact distinction between standard and blowout H_alpha surges is important in understanding their different origins and associated eruptive phenomena.

We investigate the radial color gradients of galactic disks using a sample of about 20,000 face-on spiral galaxies selected from the fourth data release of the Sloan Digital Sky Survey (SDSS-DR4). We combine galaxies with similar concentration, size and luminosity to construct composite galaxies, and then measure their color profiles by stacking the azimuthally averaged radial color profiles of all the member galaxies. Except for the smallest galaxies (R_{50}<3 kpc), almost all galaxies show negative disk color gradients with mean g-r gradient G_{gr}=-0.006 mag kpc^{-1} and r-z gradient G_{rz}=-0.018 mag kpc^{-1}. The disk color gradients are independent of the morphological types of galaxies and strongly dependent on the disk surface brightness \mu_{d}, with lower surface brightness galactic disks having steeper color gradients. We quantify the intrinsic correlation between color gradients and surface brightness as G_{gr}=-0.011\mu_{d}+0.233 and G_{rz}=-0.015\mu_{d}+0.324. These quantified correlations provide tight observational constraints on the formation and evolution models of spiral galaxies.

We calculate photometric redshifts from the Sloan Digital Sky Survey Data Release 2 Galaxy Sample using artificial neural networks (ANNs). Different input patterns based on various parameters (e.g. magnitude, color index, flux information) are explored and their performances for redshift prediction are compared. For ANN technique, any parameter may be easily incorporated as input, but our results indicate that using dereddening magnitude produces photometric redshift accuracies often better than the Petrosian magnitude or model magnitude. Similarly, the model magnitude is also superior to Petrosian magnitude. In addition, ANNs also show better performance when the more effective parameters increase in the training set. Finally, the method is tested on a sample of 79, 346 galaxies from the SDSS DR2. When using 19 parameters based on the dereddening magnitude, the rms error in redshift estimation is sigma(z)=0.020184. The ANN is highly competitive tool when compared with traditional template-fitting methods where a large and representative training set is available.