This paper describes the system architecture of a newly constructed radio telescope - the Boolardy Engineering Test Array, which is a prototype of the Australian Square Kilometre Array Pathfinder telescope. Phased array feed technology is used to form multiple simultaneous beams per antenna, providing astronomers with unprecedented survey speed. The test array described here is a 6-antenna interferometer, fitted with prototype signal processing hardware capable of forming at least 9 dual-polarisation beams simultaneously, allowing several square degrees to be imaged in a single pointed observation. The main purpose of the test array is to develop beamforming and wide-field calibration methods for use with the full telescope, but it will also be capable of limited early science demonstrations.

We review metrics to assess the radio quietness of sites used for radio astronomy. Concise metrics are needed to compare candidate sites for new telescopes, to monitor the quality of existing sites, and to design telescopes to work well at a given site. Key points of assessment are the receiver dynamic range required for the strongest interferers and the expected fraction of spectrum available for sensitive astronomical measurements. We propose three metrics: (1) total radio frequency interference power, (2) interference-to-noise power ratio and (3) time-frequency occupancy. Box plots of these metrics summarise large quantities of information, highlight expected ranges of interfering signal properties, and aid comparisons of sites and other factors of interest. We provide examples for Square Kilometre Array phase one deployment in Australia based on measurements made for the selection of this site. The Square Kilometre Array will be the largest radio telescope in the world.