As part of a study funded by NASA Headquarters, we are developing a Probe-class mission concept called the Cosmic Evolution Through UV Spectroscopy (CETUS). CETUS includes a 1.5-m aperture diameter telescope with a large field-of-view (FOV). CETUS includes three scientific instruments: a Far Ultraviolet (FUV) and Near Ultraviolet (NUV) imaging camera (CAM); a NUV Multi-Object Spectrograph (MOS); and a dual-channel Point Source Spectrograph (PSS) in the Lyman Ultraviolet (LUV), FUV, and NUV spectral regions. The large FOV Three Mirror Anastigmatic (TMA) Optical Telescope Assembly (OTA) simultaneously feeds the three separate scientific instruments. That is, the instruments view separate portions of the TMA image plane, enabling parallel operation of the three instruments. The field viewed by the MOS, whose design is based on an Offner-type spectrographic configuration to provide wide FOV correction, is actively configured to select and isolate numerous field sources using a next-generation Micro-Shutter Array (MSA). The two-channel camera design is also based on an Offner-like configuration. The Point Source Spectrograph (PSS) performs high spectral resolution spectroscopy on unresolved objects over the NUV region with spectral resolving power, R~ 40,000, in an echelle mode. The PSS also performs long-slit imaging spectroscopy at R~ 20,000 in the LUV and FUV spectral regions with two aberration-corrected, blazed, holographic gratings used in a Rowland-like configuration. The optical system also includes two Fine Guidance Sensors (FGS), and Wavefront Sensors (WFS) that sample numerous locations over the full OTA FOV. In-flight wavelength calibration is performed by a Wavelength Calibration System (WCS), and flat-fielding is also performed, both using in-flight calibration sources. This paper will describe the current optical design and the major trade studies leading to the design.

The mission concept, Cosmic Origins Through UV Surveys (CETUS) is an all-UV space mission concept that was selected and funded by NASA for study in 2017. The main capabilities of CETUS that even Hubble doesn't have are: (1) wide-field (17.4'x17.4') imaging and spectroscopy of astronomical sources with <0.5'' resolution; (2) spectral sensitivity to UV radiation at wavelengths as short as 1000 {\AA}; (3) near-UV multi-object slit spectroscopy; and (4) rapid-response UV spectroscopy and deep imaging of transients like GW 170817; and (5) 23 times higher sensitivity to extended sources. The main purposes of this CETUS Final Report are to describe the CETUS scientific program and to demonstrate the maturity of its instrumentation, which forms the basis of its estimated cost. While there are similarities of this Final Report to that submitted to NASA in March 2019 by the Goddard Space Flight Center, there are important differences including the following. * Science. The science case has been refreshed, deepened, and expanded as a result of ideas and recommendations expressed in the Astro2020 science white papers. * Instrumentation. Detailed investigations including a high-level error budget for focus with implications for thermal management, target acquisition in the MOS micro-shutter array, contamination control have been carried out. * Mission Design. The spacecraft and mission operations concepts as developed by NGIS Gilbert (formerly Orbital ATK) rather than the output of Goddard's Mission Design Lab have been adopted.. * Technology. Technology maturation plans have been updated.

We propose an experiment using a conventional optical telescope to determine whether aberration of starlight results from special relativistic effects external to a measurement sensor or from optical effects within a sensor. The proposed measurements would discriminate between the two starlight aberration models in an Earth-based experiment. In addition, the measurements would yield an independent experimental test of relativistic time dilation.

Astrometric detection and mass determination of Earth-mass exoplanets requires sub-microarcsec accuracy, which is theoretically possible with an imaging space telescope using field stars as an astrometric reference. The measurement must however overcome astrometric distortions which are much larger than the photon noise limit. To address this issue, we propose to generate faint stellar diffraction spikes using a two-dimensional grid of regularly spaced small dark spots added to the surface of the primary mirror (PM). Accurate astrometric motion of the host star is obtained by comparing the position of the spikes to the background field stars. The spikes do not contribute to scattered light in the central part of the field and therefore allow unperturbed coronagraphic observation of the star's immediate surrounding. Because the diffraction spikes are created on the PM and imaged on the same focal plane detector as the background stars, astrometric distortions affect equally the diffraction spikes and the background stars, and are therefore calibrated. We describe the technique, detail how the data collected by the wide-field camera are used to derive astrometric motion, and identify the main sources of astrometric error using numerical simulations and analytical derivations. We find that the 1.4 m diameter telescope, 0.3 sq.deg field we adopt as a baseline design achieves 0.2 microarcsec single measurement astrometric accuracy. The diffractive pupil concept thus enables sub-microarcsec astrometry without relying on the accurate pointing, external metrology or high stability hardware required with previously proposed high precision astrometry concepts.

High-precision astrometry can identify exoplanets and measure their orbits and masses, while coronagraphic imaging enables detailed characterization of their physical properties and atmospheric compositions through spectroscopy. In a previous paper, we showed that a diffractive pupil telescope (DPT) in space can enable sub-microarcsecond accuracy astrometric measurements from wide-field images by creating faint but sharp diffraction spikes around the bright target star. The DPT allows simultaneous astrometric measurement and coronagraphic imaging, and we discuss and quantify in this paper the scientific benefits of this combination for exoplanet science investigations: identification of exoplanets with increased sensitivity and robustness, and ability to measure planetary masses to high accuracy. We show how using both measurements to identify planets and measure their masses offers greater sensitivity and provides more reliable measurements than possible with separate missions, and therefore results in a large gain in mission efficiency. The combined measurements reliably identify potentially habitable planets in multiple systems with a few observations, while astrometry or imaging alone would require many measurements over a long time baseline. In addition, the combined measurement allows direct determination of stellar masses to percent-level accuracy, using planets as test particles. We also show that the DPT maintains the full sensitivity of the telescope for deep wide-field imaging, and is therefore compatible with simultaneous scientific observations unrelated to exoplanets. We conclude that astrometry, coronagraphy, and deep wide-field imaging can be performed simultaneously on a single telescope without significant negative impact on the performance of any of the three techniques.

We present a physical-optics based theory of the physical mechanism for aberration of starlight. We apply non-relativistic and relativistic theories for wavefront image formation and include the effects of optically transmitting media within the sensor. We show that the sensors imaging properties combined with finite velocity of light fully accounts for aberration. That is, the influence of the moving sensor on the incident wavefront from the star fully explains aberration. Our treatment differs from all previous derivations because we include wavefront-imaging physics within the sensor model. Our predictions match Earth-sensor based measurements, but differ at larger sensor speeds from predictions of the special relativistic-based theory. While experimental uncertainty resulting from the low Earth-orbital velocity prevents experimental confirmation of the special relativistic model of aberration, we find that Earth-based sensors containing refractive optical media could experimentally differentiate between these competing descriptions and, in addition, yield an independent test of time dilation. We derive and present the details of such an experiment.

The Stellar Imager mission concept is a space-based UV/Optical interferometer designed to resolve surface magnetic activity and subsurface structure and flows of a population of Sun-like stars, in order to accelerate the development and validation of a predictive dynamo model for the Sun and enable accurate long-term forecasting of solar/stellar magnetic activity.

Over 300 extrasolar planets (exoplanets) have been detected orbiting nearby stars. We now hope to conduct a census of all planets around nearby stars and to characterize their atmospheres and surfaces with spectroscopy. Rocky planets within their star's habitable zones have the highest priority, as these have the potential to harbor life. Our science goal is to find and characterize all nearby exoplanets; this requires that we measure the mass, orbit, and spectroscopic signature of each one at visible and infrared wavelengths. The techniques for doing this are at hand today. Within the decade we could answer long-standing questions about the evolution and nature of other planetary systems, and we could search for clues as to whether life exists elsewhere in our galactic neighborhood.

The Star Formation Camera (SFC) is a wide-field (~15'x19, >280 arcmin^2), high-resolution (18x18 mas pixels) UV/optical dichroic camera designed for the Theia 4-m space-borne space telescope concept. SFC will deliver diffraction-limited images at lambda > 300 nm in both a blue (190-517nm) and a red (517-1075nm) channel simultaneously. Our aim is to conduct a comprehensive and systematic study of the astrophysical processes and environments relevant for the births and life cycles of stars and their planetary systems, and to investigate and understand the range of environments, feedback mechanisms, and other factors that most affect the outcome of the star and planet formation process. This program addresses the origins and evolution of stars, galaxies, and cosmic structure and has direct relevance for the formation and survival of planetary systems like our Solar System and planets like Earth. We present the design and performance specifications resulting from the implementation study of the camera, conducted under NASA's Astrophysics Strategic Mission Concept Studies program, which is intended to assemble realistic options for mission development over the next decade. The result is an extraordinarily capable instrument that will provide deep, high-resolution imaging across a very wide field enabling a great variety of community science as well as completing the core survey science that drives the design of the camera. The technology associated with the camera is next generation but still relatively high TRL, allowing a low-risk solution with moderate technology development investment over the next 10 years. We estimate the cost of the instrument to be $390M FY08.

We present a compelling case for a systematic and comprehensive study of the resolved and unresolved stellar populations, ISM, and immediate environments of galaxies throughout the local volume, defined here as D < 20 Mpc. This volume is our cosmic backyard and the smallest volume that encompasses environments as different as the Virgo, Ursa Major, Fornax and (perhaps) Eridanus clusters of galaxies, a large number and variety of galaxy groups, and several cosmic void regions. In each galaxy, through a pan-chromatic (160--1100nm) set of broad-band and diagnostic narrow-band filters, ISM structures and individual luminous stars to >~1 mag below the TRGB should be resolved on scales of <5 pc (at D <~ 20 Mpc, lambda ~ 800nm, for mu_I >~ 24 mag/arcsec^2 and m_{I,TRGB} <~ 27.5 mag). Resolved and unresolved stellar populations would be analyzed through color-magnitude and color-color diagram fitting and population synthesis modeling of multi-band colors and would yield physical properties such as spatially resolved star formation histories. The ISM within and around each galaxy would be analyzed using key narrow-band filters that distinguish photospheric from shock heating and provide information on the metallicity of the gas. Such a study would finally allow unraveling the global and spatially resolved star formation histories of galaxies, their assembly, satellite systems, and the dependences thereof on local and global environment within a truly representative cosmic volume. The proposed study is not feasible with current instrumentation but argues for a wide-field (>~250 arcmin^2), high-resolution (<~0.020"--0.065" [300--1000nm]), ultraviolet--near-infrared imaging facility on a 4m-class space-based observatory.

The Telescope to Observe Planetary Systems (TOPS) is a proposed space mission to image in the visible (0.4-0.9 micron) planetary systems of nearby stars simultaneously in 16 spectral bands (resolution R~20). For the ~10 most favorable stars, it will have the sensitivity to discover 2 R_E rocky planets within habitable zones and characterize their surfaces or atmospheres through spectrophotometry. Many more massive planets and debris discs will be imaged and characterized for the first time. With a 1.2m visible telescope, the proposed mission achieves its power by exploiting the most efficient and robust coronagraphic and wavefront control techniques. The Phase-Induced Amplitude Apodization (PIAA) coronagraph used by TOPS allows planet detection at 2 lambda/d with nearly 100% throughput and preserves the telescope angular resolution. An efficient focal plane wavefront sensing scheme accurately measures wavefront aberrations which are fed back to the telescope active primary mirror. Fine wavefront control is also performed independently in each of 4 spectral channels, resulting in a system that is robust to wavefront chromaticity.

Properly apodized pupils can deliver point spread functions (PSFs) free of Airy rings, and are suitable for high dynamical range imaging of extrasolar terrestrial planets (ETPs). To reach this goal, classical pupil apodization (CPA) unfortunately requires most of the light gathered by the telescope to be absorbed, resulting in poor throughput and low angular resolution. Phase-induced amplitude apodization (PIAA) of the telescope pupil (Guyon 2003) combines the advantages of classical pupil apodization (particularly low sensitivity to low order aberrations) with full throughput, no loss of angular resolution and little chromaticity, which makes it, theoretically, an extremely attractive coronagraph for direct imaging of ETPs. The two most challenging aspects of this technique are (1) the difficulty to polish the required optics shapes and (2) diffraction propagation effects which, because of their chromaticity, can decrease the spectral bandwidth of the coronagraph. We show that a properly designed hybrid system combining classical apodization with the PIAA technique can solve both problems simultaneously. For such a system, the optics shapes can be well within today's optics manufacturing capabilities, and the $10^{-10}$ PSF contrast at $\approx 1.5 \lambda/D$ required for efficient imaging of ETPs can be maintained over the whole visible spectrum. This updated design of the PIAA coronagraph maintains the high performance of the earlier design, since only a small part of the light is lost in the classical apodizer(s).

Using 2 aspheric mirrors, it is possible to apodize a telescope beam without losing light or angular resolution: the output beam is produced by ``remapping'' the entrance beam to produce the desired light intensity distribution in a new pupil. We present the Phase-Induced Amplitude Apodization Coronagraph (PIAAC) concept, which uses this technique, and we show that it allows efficient direct imaging of extrasolar terrestrial planets with a small-size telescope in space. The suitability of the PIAAC for exoplanet imaging is due to a unique combination of achromaticity, small inner working angle (about 1.5 $\lambda/d$), high throughput, high angular resolution and large field of view. 3D geometrical raytracing is used to investigate the off-axis aberrations of PIAAC configurations, and show that a field of view of more than 100 $\lambda/d$ in radius is available thanks to the correcting optics of the PIAAC. Angular diameter of the star and tip-tilt errors can be compensated for by slightly increasing the size of the occulting mask in the focal plane, with minimal impact on the system performance. Earth-size planets at 10 pc can be detected in less than 30s with a 4m telescope. Wavefront quality requirements are similar to classical techniques.