Adaptive optics (AO) is critical in modern astronomy, as well as in optical communications and remote sensing, to deal with the rapid blurring caused by the Earth's turbulent atmosphere. But even the best AO systems are limited by their wavefront sensors, which need to be in an optical plane non-common to the science image, unavoidably leading to errors that limit the reach of current astronomy. They are also insensitive to certain wavefront-error modes, and are poorly suited to injecting light into single-mode optical fibres, important for applications such as high-resolution spectroscopy of extra-solar planets. Here we present a new type of wavefront sensor based on a photonic lantern fibre-mode-converter and deep learning. This new wavefront sensor can be placed at the same focal plane as the science image, and is also optimal for single-mode fibre injection. By only measuring the intensities of an array of single-mode outputs, both phase and amplitude information on the incident wavefront can be reconstructed. We demonstrate the concept with both simulations and an experimental realisation of this novel wavefront sensor, wherein Zernike wavefront errors are recovered from focal-plane measurements to a precision of $2.6\times10^{-5}$ radians mean-squared-error.

The Low Wind Effect (LWE) refers to a phenomenon that occurs when the wind speed inside a telescope dome drops below $3$m/s creating a temperature gradient near the telescope spider. This produces phase discontinuities in the pupil plane that are not detected by traditional Adaptive Optics (AO) systems such as the pyramid wavefront sensor or the Shack-Hartmann. Considering the pupil as divided in 4 quadrants by regular spiders, the phase discontinuities correspond to piston, tip and tilt aberrations in each quadrant of the pupil. Uncorrected, it strongly decreases the ability of high contrast imaging instruments utilizing coronagraphy to detect exoplanets at small angular separations. Multiple focal plane wavefront sensors are currently being developed and tested on the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument at Subaru Telescope: Among them, the Zernike Asymmetric Pupil (ZAP) wavefront sensor already showed on-sky that it could measure the LWE induced aberrations in focal plane images. The Fast and Furious algorithm, using previous deformable mirror commands as temporal phase diversity, showed in simulations its efficiency to improve the wavefront quality in the presence of LWE. A Neural Network algorithm trained with SCExAO telemetry showed promising PSF prediction on-sky. The Linearized Analytic Phase Diversity (LAPD) algorithm is a solution for multi-aperture cophasing and is studied to correct for the LWE aberrations by considering the Subaru Telescope as a 4 sub-aperture instrument. We present the different algorithms, show the latest results and compare their implementation on SCExAO/SUBARU as real-time wavefront sensors for the LWE compensation.

Launching in 2028, ESA's Atmospheric Remote-sensing Exoplanet Large-survey (ARIEL) survey of $\sim$1000 transiting exoplanets will build on the legacies of Kepler and TESS and complement JWST by placing its high precision exoplanet observations into a large, statistically-significant planetary population context. With continuous 0.5--7.8~$\mu$m coverage from both FGS (0.50--0.55, 0.8--1.0, and 1.0--1.2~$\mu$m photometry; 1.25--1.95~$\mu$m spectroscopy) and AIRS (1.95--7.80~$\mu$m spectroscopy), ARIEL will determine atmospheric compositions and probe planetary formation histories during its 3.5-year mission. NASA's proposed Contribution to ARIEL Spectroscopy of Exoplanets (CASE) would be a subsystem of ARIEL's FGS instrument consisting of two visible-to-infrared detectors, associated readout electronics, and thermal control hardware. FGS, to be built by the Polish Academy of Sciences' Space Research Centre, will provide both fine guiding and visible to near-infrared photometry and spectroscopy, providing powerful diagnostics of atmospheric aerosol contribution and planetary albedo, which play a crucial role in establishing planetary energy balance. The CASE team presents here an independent study of the capabilities of ARIEL to measure exoplanetary metallicities, which probe the conditions of planet formation, and FGS to measure scattering spectral slopes, which indicate if an exoplanet has atmospheric aerosols (clouds and hazes), and geometric albedos, which help establish planetary climate. Our design reference mission simulations show that ARIEL could measure the mass-metallicity relationship of its 1000-planet single-visit sample to $>7.5\sigma$ and that FGS could distinguish between clear, cloudy, and hazy skies and constrain an exoplanet's atmospheric aerosol composition to $>5\sigma$ for hundreds of targets, providing statistically-transformative science for exoplanet atmospheres.

Line lists for the ground electronic ground state for six major isotopologues of nitric oxide are presented. The line lists are constructed using empirical energy levels (and line positions) and high-level {\it ab inito} intensities. The energy levels were obtained using a combination of two approaches, from an effective Hamiltonian and from solving the rovibronic Schr\"{o}dinger equation variationally. The effective hamiltonian model was obtained through a fit to the experimental line positions of NO available in the literature for all six isotopologues using the programs SPFIT and SPCAT. The variational model was built through a least squares fit of the \textit{ab inito} potential and spin-orbit curves to the experimentally derived energies and experimental line positions of the main isotopologue only using the Duo program. The \textit{ab inito} potential energy, spin-orbit and dipole moment curves (PEC, SOC and DMC) are computed using high-level {\it ab inito} methods and the MARVEL method is used to obtain energies of NO from experimental transition frequencies. Each line list covers a wavenumber range from 0 - 40,000 \cm with approximately 22,000 rovibronic states and 2.3-2.6 million transitions extending to $J_{max} = 184.5$ and $v_{max} = 51$. Partition functions are also calculated up to a temperature of 5000 K. The calculated absorption line intensities at 296 K using these line lists show excellent agreement with those included in the HITRAN and HITEMP databases. The computed NO line lists are the most comprehensive to date, covering a wider wavenumber and temperature range compared to both the HITRAN and HITEMP databases. These line lists are also more accurate than those used in HITEMP. The full line lists are available from the CDS and ExoMol databases; data will also be available from CDMS.

Individual dark matter halos in cosmological simulations vary widely in their detailed structural properties such as shape, rotation, substructure and degree of internal relaxation. Recent non-parametric (principal component) analyses suggest that a few principal components explain a large fraction of the scatter in halo properties. The main principal component is closely linked with concentration, which in turn is known to be related to the mass accretion history of the halo. Here we examine more generally the connection between mass accretion history and structural parameters. The space of mass accretion histories has principal components of its own. We find that the strongest two can be interpreted as the overall age of the halo and the acceleration or deceleration of growth at late times. These two components only account for $\sim70$%\ of the scatter in mass accretions histories however, due to the stochastic effect of major mergers. Relating structural parameters to formation history, we find that concentration correlates strongly with the early history of the halo, while relaxation correlates with the late history. We examine the inferences about formation history that can be drawn by splitting haloes into subsamples, based on observable properties such as concentration and shape at some final time. This approach suggests interesting possibilities, such as the possibility of defining young and old samples of galaxy clusters in a rigorous, quantitative way, or testing the dynamical assumptions of galaxy formation models empirically.

Conventionally, long GRBs are thought to be caused by the core collapses of massive stars. During the lifetime of a massive star, a stellar wind bubble environment should be produced. Furthermore, the microphysics shock parameters may vary along with the evolution of the fireball. Here we investigate the variation of the microphysics shock parameters under the condition of wind bubble environment, and allow the microphysics shock parameters to be discontinuous at shocks in the ambient medium. It is found that our model can acceptably reproduce the rebrightenings observed in GRB afterglows, at least in some cases. The effects of various model parameters on rebrightenings are investigated. The rebrightenings observed in both the R-band and X-ray afterglow light curves of GRB 060206, GRB 070311 and GRB 071010A are reproduced in this model.

X-ray transients appeared in optically non-active galactic nuclei have been observed in recent years. The most popular model explaining this kind of phenomena is the conventional tidal disruption model. In this model, when a star moves within the tidal radius of a black hole, part of the star materials will fall into the black hole through an accretion disk, which gives rise to the luminous flare. We propose that the X-ray emission may not necessarily come from radiation of the accretion disk alone. Instead, it may be related to a jet. As the jet travels in the interstellar medium, a shock is produced and synchrotron radiation is expected. We compared the model light curve and the synchrotron radiation spectrum with the observed data, and find that our model explains the observed light curve and late-time spectrum well. Our model predicts that these transient active galactic nuclei could be sources of the future gamma-ray satellites, e.g. GLAST and the emission region will be expanding with time.

Due to the relativistic motion of gamma-ray burst remnant and its deceleration in the circumburst medium, the equal arrival time surfaces at any moment are not spherical, but should be distorted ellipsoids. This will leave some imprints in the afterglows. In this article, we study the effect of equal arrival time surfaces numerically under various conditions, i.e., for isotropic fireballs, collimated jets, density jump conditions, and energy injection events. For each condition, direct comparison between the two instances when the effect is and is not included, is presented. For isotropic fireballs and jets viewed on axis, the effect slightly hardens the spectra and postpones the peak time of afterglows, but does not change the shapes of the spectra and light curves significantly. In the cases when a density jump or an energy injection is involved, the effect smears the variability of the afterglows markedly.