PEPSI is the bench-mounted, two-arm, fibre-fed and stabilized Potsdam Echelle Polarimetric and Spectroscopic Instrument for the 2x8.4 m Large Binocular Telescope (LBT). Three spectral resolutions of either 43 000, 120 000 or 270 000 can cover the entire optical/red wavelength range from 383 to 907 nm in three exposures. Two 10.3kx10.3k CCDs with 9-{\mu}m pixels and peak quantum efficiencies of 96 % record a total of 92 echelle orders. We introduce a new variant of a wave-guide image slicer with 3, 5, and 7 slices and peak efficiencies between 96 %. A total of six cross dispersers cover the six wavelength settings of the spectrograph, two of them always simultaneously. These are made of a VPH-grating sandwiched by two prisms. The peak efficiency of the system, including the telescope, is 15% at 650 nm, and still 11% and 10% at 390 nm and 900 nm, respectively. In combination with the 110 m2 light-collecting capability of the LBT, we expect a limiting magnitude of 20th mag in V in the low-resolution mode. The R=120 000 mode can also be used with two, dual-beam Stokes IQUV polarimeters. The 270 000-mode is made possible with the 7-slice image slicer and a 100- {\mu}m fibre through a projected sky aperture of 0.74", comparable to the median seeing of the LBT site. The 43000-mode with 12-pixel sampling per resolution element is our bad seeing or faint-object mode. Any of the three resolution modes can either be used with sky fibers for simultaneous sky exposures or with light from a stabilized Fabry-Perot etalon for ultra-precise radial velocities. CCD-image processing is performed with the dedicated data-reduction and analysis package PEPSI-S4S. A solar feed makes use of PEPSI during day time and a 500-m feed from the 1.8 m VATT can be used when the LBT is busy otherwise. In this paper, we present the basic instrument design, its realization, and its characteristics.

The GREGOR Fabry-P\'erot Interferometer (GFPI) is one of three first-light instruments of the German 1.5-meter GREGOR solar telescope at the Observatorio del Teide, Tenerife, Spain. The GFPI allows fast narrow-band imaging and post-factum image restoration. The retrieved physical parameters will be a fundamental building block for understanding the dynamic Sun and its magnetic field at spatial scales down to about 50 km on the solar surface. The GFPI is a tunable dual-etalon system in a collimated mounting. It is designed for spectrometric and spectropolarimetric observations between 530-860 nm and 580-660 nm, respectively, and possesses a theoretical spectral resolution R of about 250,000. Large-format, high-cadence CCD detectors with sophisticated computer hard- and software enable the scanning of spectral lines in time-spans equivalent to the evolution time of solar features. The field-of-view (FOV) of 50" x 38" covers a significant fraction of the typical area of active regions in the spectroscopic mode. In case of Stokes-vector spectropolarimetry, the FOV reduces to 25" x 38". We present the main characteristics of the GFPI including advanced and automated calibration and observing procedures. We discuss improvements in the optical design of the instrument and show first observational results. Finally, we lay out first concrete ideas for the integration of a second FPI, the Blue Imaging Solar Spectrometer (BLISS), which will explore the blue spectral region below 530 nm.

In this review, we look back upon the literature, which had the GREGOR solar telescope project as its subject including science cases, telescope subsystems, and post-focus instruments. The articles date back to the year 2000, when the initial concepts for a new solar telescope on Tenerife were first presented at scientific meetings. This comprehensive bibliography contains literature until the year 2012, i.e., the final stages of commissioning and science verification. Taking stock of the various publications in peer-reviewed journals and conference proceedings also provides the "historical" context for the reference articles in this special issue of Astronomische Nachrichten/Astronomical Notes.

The GREGOR Fabry-P\'erot Interferometer (GFPI) is one of three first-light instruments of the German 1.5-meter GREGOR solar telescope at the Observatorio del Teide, Tenerife, Spain. The GFPI uses two tunable etalons in collimated mounting. Thanks to its large-format, high-cadence CCD detectors with sophisticated computer hard- and software it is capable of scanning spectral lines with a cadence that is sufficient to capture the dynamic evolution of the solar atmosphere. The field-of-view (FOV) of 50" x 38" is well suited for quiet Sun and sunspot observations. However, in the vector spectropolarimetric mode the FOV reduces to 25" x 38". The spectral coverage in the spectroscopic mode extends from 530-860 nm with a theoretical spectral resolution R of about 250,000, whereas in the vector spectropolarimetric mode the wavelength range is at present limited to 580-660 nm. The combination of fast narrow-band imaging and post-factum image restoration has the potential for discovery science concerning the dynamic Sun and its magnetic field at spatial scales down to about 50 km on the solar surface.

The GREGOR Fabry-Perot Interferometer (GFPI) is one of three first-light instruments of the German 1.5-meter GREGOR solar telescope at the Observatorio del Teide, Tenerife, Spain. The GFPI allows fast narrow-band imaging and post-factum image restoration. The retrieved physical parameters will be a fundamental building block for understanding the dynamic Sun and its magnetic field at spatial scales down to 50 km on the solar surface. The GFPI is a tunable dual-etalon system in a collimated mounting. It is designed for spectropolarimetric observations over the wavelength range from 530-860 nm with a theoretical spectral resolution of R ~ 250,000. The GFPI is equipped with a full-Stokes polarimeter. Large-format, high-cadence CCD detectors with powerful computer hard- and software enable the scanning of spectral lines in time spans equivalent to the evolution time of solar features. The field-of-view of 50" x 38" covers a significant fraction of the typical area of active regions. We present the main characteristics of the GFPI including advanced and automated calibration and observing procedures. We discuss improvements in the optical design of the instrument and show first observational results. Finally, we lay out first concrete ideas for the integration of a second FPI, the Blue Imaging Solar Spectrometer, which will explore the blue spectral region below 530 nm.

Fabry-Perot interferometers have advantages over slit spectrographs because they allow fast narrow-band imaging and post-factum image reconstruction of spectropolarimetric data. Temperature, plasma velocity, and magnetic field maps can be derived from inversions of photospheric and chromospheric spectral lines, thus, advancing our understanding of the dynamic Sun and its magnetic fields at the smallest spatial scales. The GREGOR Fabry-Perot Interferometer (GFPI) is one of two firstlight instruments of the 1.5-meter GREGOR solar telescope, which is currently being commissioned at the Observatorio del Teide, Tenerife, Spain. The GFPI operates close to the diffraction limit of GREGOR, thus, providing access to fine structures as small as 60 km on the solar surface. The field-of-view of 52"x 40" is sufficiently large to cover significant portions of active regions. The GFPI is a tuneable dual-etalon system in a collimated mounting. Equipped with a full-Stokes polarimeter, it records spectropolarimetric data with a spectral resolution of R = 250,000 over the wavelength range from 530-860 nm. Large-format, high-cadence CCD detectors with powerful computer hard- and software facilitate scanning of spectral lines in time spans corresponding to the evolution time-scale of solar features. We present the main characteristics of the GFPI including the latest developments in software, mechanical mounts, and optics.

ICE-T (International Concordia Explorer Telescope) is a double 60 cm f/1.1 photometric robotic telescope, on a parallactic mount, which will operate at Dome C, in the long Antarctic night, aiming to investigate exoplanets and activity of the hosting stars. Antarctic Plateau site is well known to be one of the best in the world for observations because of sky transparency in all wavelengths and low scintillation noise. Due to the extremely harsh environmental conditions (the lowest average temperature is -80$^\circ$C) the criteria adopted for an optimal design are really challenging. Here we present the strategies we have adopted so far to fulfill the mechanical and optical requirements.