We report on the development of multi-absorber transition edge sensors (TESs), referred to as hydras. A hydra consists of multiple x-ray absorbers each with a different thermal conductance to a TES. Position information is encoded in the pulse shape. With some trade-off in performance, hydras enable very large format arrays without the prohibitive increase in bias and read-out components associated with arrays of individual TESs. Hydras are under development for the next generation of space telescope such as Lynx. Lynx is a NASA concept under study that will combine a < 1 arcsecond angular resolution optic with 100,000-pixel microcalorimeter array with energy resolution of deltaE_FWHM ~ 3 eV in the soft x-ray energy range. We present first results from hydras with 25-pixels for Lynx. Designs with absorbers on a 25 micron and 50 micron pitch are studied. Arrays incorporate, for the first time, microstrip buried wiring layers of suitable pitch and density required to readout a full-scale Lynx array. The resolution from the coadded energy histogram including all 25-pixels was deltaE_FWHM = 1.66+/-0.02 eV and 3.34+/-0.06 eV at an energy of 1.5 keV for the 25 micron and 50 micron absorber designs respectively. Position discrimination is demonstrated from parameterization of the rise-time.

This is the final report of a three-paper series on the K-shell photoabsorption and photoionization of trace elements, namely F, Na, P, Cl, K, Sc, Ti, V, Cr, Mn, Co, Cu and Zn. K lines and edges from such elements are observed in the X-ray spectra of supernova remnants, galaxy clusters and accreting black holes and neutron stars, their diagnostic potential being limited by poor atomic data. We are completing the previously reported radiative datasets with new photoabsorption and photoionization cross sections for isoelectronic sequences with electron number $19\leq N\leq 26$. We are also giving attention to the access, integrity and usability of the whole resulting atomic database. Target representations are obtained with the atomic structure code AUTOSTRUCTURE. Where possible, cross sections for ground-configuration states are computed with the Breit--Pauli $R$-matrix method (BPRM) in either intermediate or $LS$ coupling including damping (radiative and Auger) effects; otherwise and more generally, they are generated in the isolated-resonance approximation with AUTOSTRUCTURE. Cross sections were computed with BPRM only for the K ($N=19$) and Ca ($N=20$) isoelectronic sequences, the latter in $LS$ coupling. For the rest of the sequences ($21\leq N \leq 26$), AUTOSTRUCTURE was run in $LS$-coupling mode taking into account damping effects. Comparisons between these two methods for K-like Zn XII and Ca-like Zn XI show that, to ensure reasonable accuracy, the $LS$ calculations must be performed taking into account the non-fine-structure relativistic corrections.

Fast timing capability in X-ray observation of astrophysical objects is one of the key properties for the ASTRO-H (Hitomi) mission. Absolute timing accuracies of 350 micro second or 35 micro second are required to achieve nominal scientific goals or to study fast variabilities of specific sources. The satellite carries a GPS receiver to obtain accurate time information, which is distributed from the central onboard computer through the large and complex SpaceWire network. The details on the time system on the hardware and software design are described. In the distribution of the time information, the propagation delays and jitters affect the timing accuracy. Six other items identified within the timing system will also contribute to absolute time error. These error items have been measured and checked on ground to ensure the time error budgets meet the mission requirements. The overall timing performance in combination with hardware performance, software algorithm, and the orbital determination accuracies, etc, under nominal conditions satisfies the mission requirements of 35 micro second. This work demonstrates key points for space-use instruments in hardware and software designs and calibration measurements for fine timing accuracy on the order of microseconds for mid-sized satellites using the SpaceWire (IEEE1355) network.

We are concerned with improving the diagnostic potential of the K lines and edges of elements with low cosmic abundances that are observed in the X-ray spectra of supernova remnants, galaxy clusters and accreting black holes and neutron stars. Since accurate photoabsorption and photoionization cross sections are needed in their spectral models, they have been computed for isoelectronic sequences with electron number $12\leq N\leq 18$ using a multi-channel method. Target representations are obtained with the atomic structure code AUTOSTRUCTURE, and ground-state cross sections are computed with the Breit--Pauli $R$-matrix method (BPRM) in intermediate coupling, including damping (radiative and Auger) effects. The contributions from channels associated with the 2s-hole $[2{\rm s}]\mu$ target configurations and those containing 3d orbitals are studied in the Mg and Ar isoelectronic sequences. Cross sections for the latter ions are also calculated in the isolated-resonance approximation as implemented in AUTOSTRUCTURE and compared with BPRM to test their accuracy. It is confirmed that the collisional channels associated with the $[2{\rm s}]\mu$ target configurations must be taken into account owing to significant increases in the monotonic background cross section between the L and K edges. Target configurations with 3d orbitals give rise to fairly conspicuous unresolved transition arrays in the L-edge region, but to a much lesser extent in the K-edge which is our main concern; therefore, they have been neglected throughout owing to their computationally intractable channel inventory, thus allowing the computation of cross sections for all the ions with $12\leq N\leq 18$ in intermediate coupling with BPRM. We find that the isolated-resonance approximations performs satisfactorily.

We present detailed analyses of oxygen K absorption in the interstellar medium (ISM) using four high-resolution Chandra spectra towards the X-ray low-mass binary XTE J1817-330. The 11-25 A broadband is described with a simple absorption model that takes into account the pileup effect and results in an estimate of the hydrogen column density. The oxygen K-edge region (21-25 A) is fitted with the physical warmabs model, which is based on a photoionization model grid generated with the xstar code with the most up-to-date atomic database. This approach allows a benchmark of the atomic data which involves wavelength shifts of both the K lines and photoionization cross sections in order to fit the observed spectra accurately. As a result we obtain: a column density of N(H)=1.38+/-0.01\times 10^21 cm^-2; ionization parameter of log(xi)=-2.70+/-0.023; oxygen abundance of A(O)= 0.689^{+0.015}_{-0.010}; and ionization fractions of OI/O = 0.911, OII/O = 0.077, and OIII/O = 0.012 that are in good agreement with previous studies. Since the oxygen abundance in warmabs is given relative to the solar standard of Grevesse et al. (1998), a rescaling with the revision by Asplund et al. (2009) yields A(O)=0.952^{+0.020}_{-0.013}, a value close to solar that reinforces the new standard. We identify several atomic absorption lines Kalpha, Kbeta, and Kgamma in OI and OII; and Kalpha in OIII, OVI, and OVII - last two probably residing in the neighborhood of the source rather than in the ISM. This is the first firm detection of oxygen K resonances with principal quantum numbers n>2 associated to ISM cold absorption.

Neutron(n)-capture elements (atomic number Z>30), which can be produced in planetary nebula (PN) progenitor stars via s-process nucleosynthesis, have been detected in nearly 100 PNe. This demonstrates that nebular spectroscopy is a potentially powerful tool for studying the production and chemical evolution of trans-iron elements. However, significant challenges must be addressed before this goal can be achieved. One of the most substantial hurdles is the lack of atomic data for n-capture elements, particularly that needed to solve for their ionization equilibrium (and hence to convert ionic abundances to elemental abundances). To address this need, we have computed photoionization cross sections and radiative and dielectronic recombination rate coefficients for the first six ions of Se and Kr. The calculations were benchmarked against experimental photoionization cross section measurements. In addition, we computed charge transfer (CT) rate coefficients for ions of six n-capture elements. These efforts will enable the accurate determination of nebular Se and Kr abundances, allowing robust investigations of s-process enrichments in PNe.

We present R-matrix calculations of photoabsorption and photoionization cross sections across the K edge of the Li-like to Ca-like ions stages of Ni. Level-resolved, Breit-Pauli calculations were performed for the Li-like to Na-like stages. Term-resolved calculations, which include the mass-velocity and Darwin relativistic corrections, were performed for the Mg-like to Ca-like ion stages. This data set is extended up to Fe-like Ni using the distorted wave approximation as implemented by AUTOSTRUCTURE. The R-matrix calculations include the effects of radiative and Auger dampings by means of an optical potential. The damping processes affect the absorption resonances converging to the K thresholds causing them to display symmetric profiles of constant width that smear the otherwise sharp edge at the K-shell photoionization threshold. These data are important for the modeling of features found in photoionized plasmas.

We present multi-configuration Breit-Pauli AUTOSTRUCTURE calculations of distorted-wave photoionization (PI) cross sections, and total and partial final-state resolved radiative recombination (RR) and dielectronic recombination (DR) rate coefficients for the first six ions of the trans-iron element Se. These calculations were motivated by the recent detection of Se emission lines in a large number of planetary nebulae. Se is a potentially useful tracer of neutron-capture nucleosynthesis, but accurate determinations of its abundance in photoionized nebulae have been hindered by the lack of atomic data governing its ionization balance. Our calculations were carried out in intermediate coupling with semi-relativistic radial wavefunctions. PI and recombination data were determined for levels within the ground configuration of each ion, and experimental PI cross-section measurements were used to benchmark our results. For DR, we allowed dn=0 core excitations, which are important at photoionized plasma temperatures. DR is the dominant recombination process for each of these Se ions at temperatures representative of photoionized nebulae (~10^4 K). To estimate the uncertainties of these data, we compared results from three different configuration-interaction expansions for each ion, and tested the sensitivity of the results to the radial scaling factors in the structure calculations. We find that the internal uncertainties are typically 30-50% for the direct PI cross sections and ~10% for the computed RR rate coefficients, while those for low-temperature DR can be considerably larger (from 15-30% up to two orders of magnitude) due to the unknown energies of near-threshold autoionization resonances. The results are suitable for incorporation into photoionization codes used to numerically simulate astrophysical nebulae, and will enable robust determinations of nebular Se abundances.

We investigate the absorption structure of the oxygen in the interstellar medium by analyzing {\it XMM}-Newton observations of the low mass X-ray binary Sco X-1. We use simple models based on the O {\sc i} atomic cross section from different sources to fit the data and evaluate the impact of the atomic data in the interpretation of astrophysical observations. We show that relatively small differences in the atomic calculations can yield spurious results. We also show that the most complete and accurate set of atomic cross sections successfully reproduce the observed data in the $21-24.5$ {\AA} wavelength region of the spectrum. Our fits indicate that the absorption is mainly due to neutral gas with an ionization parameter of $\xi=10^{-4}$ erg cm s$^{-1}$, and an oxygen column density of $N_{\mathrm{O}}\approx 8-10\times 10^{17}$ cm$^{-2}$. Our models are able to reproduce both the K edge and the K$\alpha$ absorption line from O {\sc i}, which are the two main features in this region. We find no conclusive evidence for absorption by other than atomic oxygen.

[Abridged] Investigations of neutron(n)-capture element nucleosynthesis and chemical evolution have largely been based on stellar spectroscopy. However, the recent detection of these elements in several planetary nebulae (PNe) indicates that nebular spectroscopy is a promising new tool for such studies. In PNe, n-capture element abundance determinations reveal details of s-process nucleosynthesis and convective mixing in evolved low-mass stars, as well as the chemical evolution of elements that cannot be detected in stellar spectra. Only one or two ions of a given trans-iron element can typically be detected in individual nebulae. Elemental abundance determinations thus require corrections for the abundances of unobserved ions. Such corrections rely on the availability of atomic data for processes that control the ionization equilibrium of nebulae. Until recently, these data were unknown for virtually all n-capture element ions. For the first five ions of Se, Kr, and Xe -- the three most widely detected n-capture elements in PNe -- we are calculating photoionization cross sections and radiative and dielectronic recombination rate coefficients using the multi-configuration Breit-Pauli atomic structure code AUTOSTRUCTURE. Charge transfer rate coefficients are being determined with a multichannel Landau-Zener code. To calibrate these calculations, we have measured absolute photoionization cross sections of Se and Xe ions at the Advanced Light Source synchrotron radiation facility. These atomic data can be incorporated into photoionization codes, which we will use to derive ionization corrections (hence abundances) for Se, Kr, and Xe in ionized nebulae. These results are critical for honing nebular spectroscopy into a more effective tool for investigating the production and chemical evolution of trans-iron elements in the Universe.

We present $R$-matrix calculations of photoabsorption and photoionization cross sections across the K-edge of Mg, Si, S, Ar, and Ca ions with more than 10 electrons. The calculations include the effects of radiative and Auger damping by means of an optical potential. The wave functions are constructed from single-electron orbital bases obtained using a Thomas--Fermi--Dirac statistical model potential. Configuration interaction is considered among all states up to $n=3$. The damping processes affect the resonances converging to the K-thresholds causing them to display symmetric profiles of constant width that smear the otherwise sharp edge at the photoionization threshold. These data are important for modeling of features found in photoionized plasmas.

Reliable atomic data have been computed for the spectral modeling of the nitrogen K lines, which may lead to useful astrophysical diagnostics. Data sets comprise valence and K-vacancy level energies, wavelengths, Einstein $A$-coefficients, radiative and Auger widths and K-edge photoionization cross sections. An important issue is the lack of measurements which are usually employed to fine-tune calculations so as to attain spectroscopic accuracy. In order to estimate data quality, several atomic structure codes are used and extensive comparisons with previous theoretical data have been carried out. In the calculation of K photoabsorption with the Breit--Pauli $R$-matrix method, both radiation and Auger damping, which cause the smearing of the K edge, are taken into account. This work is part of a wider project to compute atomic data in the X-ray regime to be included in the database of the popular {\sc xstar} modeling code.

Spectroscopy of planetary nebulae (PNe) provides the means to investigate s-process enrichments of neutron(n)-capture elements that cannot be detected in asymptotic giant branch (AGB) stars. However, accurate abundance determinations of these elements present a challenge. Corrections for unobserved ions can be large and uncertain, since in many PNe only one ion of a given n-capture element has been detected. Furthermore, the atomic data governing the ionization balance of these species are not well-determined, inhibiting the derivation of accurate ionization corrections. We present initial results of a program that addresses these challenges. Deep high resolution optical spectroscopy of ~20 PNe has been performed to detect emission lines from trans-iron species including Se, Br, Kr, Rb, and Xe. The optical spectral region provides access to multiple ions of these elements, which reduces the magnitude and importance of uncertainties in the ionization corrections. In addition, experimental and theoretical efforts are providing determinations of the photoionization cross-sections and recombination rate coefficients of Se, Kr, and Xe ions. These new atomic data will make it possible to derive robust ionization corrections for these elements. Together, our observational and atomic data results will enable n-capture element abundances to be determined with unprecedented accuracy in ionized nebulae.

Radiative and Auger decay data have been calculated for modelling the K lines in ions of the nickel isonuclear sequence, from Ni$^+$ up to Ni$^{27+}$. Level energies, transition wavelengths, radiative transition probabilities, and radiative and Auger widths have been determined using Cowan's Hartree--Fock with Relativistic corrections (HFR) method. Auger widths for the third-row ions (Ni$^+$--Ni$^{10+}$) have been computed using single-configuration average (SCA) compact formulae. Results are compared with data sets computed with the AUTOSTRUCTURE and MCDF atomic structure codes and with available experimental and theoretical values, mainly in highly ionized ions and in the solid state.