Normalized to: Wildy, C.
[1]
oai:arXiv.org:1908.04990 [pdf] - 2025695
Quasar Main Sequence: a line or a plane?
Submitted: 2019-08-14, last modified: 2019-10-15
A quasar main sequence is widely believed to reveal itself through objects
represented in a plane spanned by two parameters: the full-width at
half-maximum (FWHM) of H$\beta{}$, and the ratio of Fe II to H$\beta{}$
equivalent width. This sequence is related to the application to quasar
properties of principal component analysis (PCA), which reveals that the main
axis of variance (Eigenvector 1) is co-directional with a strong
anti-correlation between these two measurements. We aim to determine whether
the dominance of two Eigenvectors, originally discovered over two decades ago,
is replicated in newer high-quality quasar samples. If so, we aim to test if a
non-linear approach is an improvement on the linear PCA method by finding two
new parameters which represent a more accurate projection of the variances than
the Eigenvectors recovered from PCA. We selected quasars from the XSHOOTER
archive and a major quasar catalog to build high quality samples. These samples
were tested with PCA. We find that the new high-quality samples do indeed have
two dominant Eigenvectors as originally discovered. Subsequently we find that
the fitting of a non-linear decay curve to the main sequence allows a new plane
spanned by linearly independent axes to be defined, based on the distance along
the decay curve as the main axis and the distance of each quasar datapoint from
the curve as the secondary axis respectively. The results show that it is
possible to define a new plane based on the quasar main sequence which accounts
for the majority of the variance. The most likely candidate for the new main
axis is an anti-correlation with black hole mass. In this case the secondary
axis likely represents luminosity. However, given the results of previous
studies, inclination angle likely plays a role in H$\beta{}$ width.
[2]
oai:arXiv.org:1903.08724 [pdf] - 1871548
Stellar populations in hosts of giant radio galaxies and their
neighbouring galaxies
Submitted: 2019-03-20
Context: Giant radio galaxies (with projected linear size of radio structure
larger than 0.7 Mpc) are very rare and unusual objects. Only $\sim$5% of
extended radio sources reach such sizes. Understanding of the processes
responsible for their large sizes is crucial to further our knowledge about the
radio source's evolution.
Aims: We check the hypothesis that giants become extremely large due to the
specific history of their host galaxy formation, as well as in the context of
the cluster or group of galaxies where they evolve. Therefore we study the star
formation histories in their host galaxies and in galaxies located in their
neighbourhood.
Methods: We studied 41 giant-size radio galaxies as well as galaxies located
within a radius of 5 Mpc around giants to verify whether the external
conditions of the intergalactic medium somehow influence the internal evolution
of galaxies in the group/cluster. We compared the results with a control sample
of smaller-sized Fanaroff--Riley type II radio galaxies and their neighbouring
galaxies. We fit stellar continua in all galaxy spectra using the spectral
synthesis code STARLIGHT and provide statistical analysis of the results.
Results: We find that hosts of giant radio galaxies have a larger amount of
intermediate age stellar populations compared with smaller-sized FRII radio
sources. The same result is also visible when we compare neighbouring galaxies
located up to 1.5 Mpc around giants and FRIIs. This may be evidence that star
formation in groups with giants was triggered due to global processes occurring
in the ambient intergalactic medium. These processes may also contribute to
mechanisms responsible for the extremely large sizes of giants.
[3]
oai:arXiv.org:1811.09559 [pdf] - 1815091
Interpretation of Departure from the Broad Line Region Scaling in Active
Galactic Nuclei
Czerny, Bozena;
Wang, Jian-Min;
Du, Pu;
Hryniewicz, Krzysztof;
Karas, Vladimir;
Li, Yan-Rong;
Panda, Swayamtrupta;
Sniegowska, Marzena;
Wildy, Conor;
Yuan, Ye-Fei
Submitted: 2018-11-23
Most results of the reverberation monitoring of active galaxies showed a
universal scaling of the time delay of the Hbeta emission region with the
monochromatic flux at 5100 A, with very small dipersion. Such a scaling favored
the dust-based formation mechanism of the Broad Line Region (BLR). Recent
reverberation measurements showed that actually a significant fraction of
objects exhibits horter lags than the previously found scaling. Here we
demonstrate that these shorter lags can be explained by the old concept of
scaling of the BLR size with the ionization parameter. Assuming a universal
value of this parameter and universal value of the cloud density reproduces the
distribution of observational points in the time delay vs. monochromatic flux
plane, provided that a range of black hole spins is allowed. However, a
confirmation of the new measurements for low/moderate Eddington ratio sources
is strongly needed before the dust-based origin of the BLR can be excluded.
[4]
oai:arXiv.org:1806.08571 [pdf] - 1783798
Modelling of the quasar main sequence in the optical plane
Submitted: 2018-06-22, last modified: 2018-09-28
The concept of the quasar main sequence is very attractive since it stresses
correlations between various parameters and implies the underlying simplicity.
In the optical plane defined by the width of the H\{beta} line and the ratio of
the equivalent width of the Fe II to H\{beta} observed objects form a
characteristic pattern. In this paper, we use a physically motivated model to
explain the distribution of quasars in the optical plane. Continuum is modelled
as an accretion disk with a hard X-ray power law uniquely tight to the disk at
the basis of observational scaling, and the Broad Line Region distance is
determined also from observational scaling. We perform the computations of the
FeII and H\{beta} line production with the code CLOUDY. We have only six free
parameters for an individual source: maximum temperature of the accretion disk,
Eddington ratio, cloud density, cloud column density, microturbulence, and iron
abundance, and only the last four remain as global parameters in our modelling
of the whole sequence. Our theoretically computed points cover well the optical
plane part populated with the observed quasars, particularly if we allow for
super-Solar abundance of heavy elements. Explanation of the exceptionally
strong Fe II emitter requires a stronger contribution from the dark sides of
the clouds. Analyzing the way how our model covers the optical plane we
conclude that there is no single simple driver behind the sequence, as neither
the Eddington ratio nor broad band spectrum shape plays the dominant role.
Also, the role of the viewing angle in providing the dispersion of the quasar
main sequence is apparently not as strong as expected.
[5]
oai:arXiv.org:1805.06263 [pdf] - 1717136
Mg II line properties in lobe-dominated quasars
Submitted: 2018-05-16
We investigate the relationships between Mg ii {\lambda}2798 emission line
properties, as well as between these properties and inclination angle and Fe ii
strength, in a lobe-dominated quasar sample. We find no correlation between Mg
ii line width and inclination, unlike previous studies of the general quasar
population. This suggests that the Mg ii emission region in these objects is
not of a thin disk geometry, however the average equivalent width of the line
negates a spherical alternative. A positive correlation between Mg ii
equivalent width and inclination cannot be ruled out, meaning there is no
strong evidence that Mg ii emission is anisotropic. Since thin disk emission
would be highly directional, the geometric implications of these two findings
are compatible. The lack of line width correlation with inclination may also
indicate that Mg ii is useful for estimating black hole masses in
lobe-dominated quasar samples, since it is unbiased by orientation. Some
quasars in our sample have almost edge-on viewing angles and therefore cannot
have a smooth toroidal obscurer co-planar with the accretion disk. Alternatives
may be a distorted dusty disk or a clumpy obscurer. This could result from the
sample selection bias towards high inclination objects, rather than intrinsic
differences between lobe-dominated and typical quasars. Five objects have
visible [O iii] allowing equivalent width calculation, revealing it to be
higher than in typical quasars. Since these objects are of high inclination,
this finding supports the positive correlation between [O iii] equivalent width
and inclination found in a previous study.
[6]
oai:arXiv.org:1701.03694 [pdf] - 1690282
The properties of active galaxies at the extreme of eigenvector 1
Submitted: 2017-01-13, last modified: 2018-01-08
Eigenvector 1 (EV1) is the formal parameter which allows the introduction of
some order in the properties of the unobscured type 1 active galaxies. We aim
to understand the nature of this parameter by analyzing the most extreme
examples of quasars with the highest possible values of the corresponding
eigenvalues $R_{Fe}$. We selected the appropriate sources from the Sloan
Digital Sky Survey (SDSS) and performed detailed modeling, including various
templates for the Fe II pseudo-continuum and the starlight contribution to the
spectrum. Out of 27 sources with $R_{Fe}$ larger than 1.3 and with the
measurement errors smaller than 20\% selected from the SDSS quasar catalog,
only six sources were confirmed to have a high value of $R_{Fe}$, defined as
being above 1.3. All other sources have $an R_{Fe}$ of approximately 1. Three
of the high $R_{Fe}$ objects have a very narrow H$\beta$ line, below 2100 km
s$^{-1}$ but three sources have broad lines, above 4500 km s$^{-1}$, that do
not seem to form a uniform group, differing considerably in black hole mass and
Eddington ratio; they simply have a very similar EW([OIII]5007) line.
Therefore, the interpretation of the EV1 remains an open issue.
[7]
oai:arXiv.org:1801.00330 [pdf] - 1612007
What drives the Quasar Main Sequence?
Submitted: 2017-12-31
Eigenvector 1 (EV1) was found to be the dominant component behind the
significant correlations for the measured parameters in quasar spectra (Boroson
& Green, 1992). The parameter R$_{\mathrm{FeII}}$, which strongly correlates to
the EV1, is the ${\mathrm{FeII}}$ strength, defined to be the ratio of the
equivalent width of ${\mathrm{FeII}}$ to the equivalent width of
${\mathrm{H\beta}}$. This allows to construct a quasar main sequence analogous
to the stellar properties driven HR diagram (Sulentic et al. 2001). We try to
find the main driver behind the EV1 among the basic (theoretically motivated)
parameters of an active nucleus (Eddington ratio, black hole mass, accretion
rate, spin, and viewing angle). Based on theoretical modeling using the
photoionization code CLOUDY (Ferland et al. 2013), we test the hypothesis that
the physical driver of EV1 is the maximum of the accretion disk temperature
($\mathrm{T_{BBB}}$), reflected in the shape of the spectral energy
distribution (SED). We have assumed that both H$\mathrm{\beta}$ and
Fe${\mathrm{II}}$ emission come from the Broad Line Region represented as a
constant density cloud in a plane-parallel geometry. We test the effect of
changing Eddington ratio on the $\mathrm{R_{FeII} - T_{BBB}}$ trends with
varying mean hydrogen densities. We also test the effect of adding
microturbulence that affect the line intensities on the overall
$\mathrm{R_{FeII} - T_{BBB}}$ picture.
[8]
oai:arXiv.org:1712.05176 [pdf] - 1605226
Testing the physical driver of Eigenvector 1 in Quasar Main Sequence
Submitted: 2017-12-14
Quasars are among the most luminous sources characterized by their broad band
spectra ranging from radio through optical to X-ray band, with numerous
emission and absorption features. Using the Principal Component Analysis (PCA),
Boroson & Green (1992) were able to show significant correlations between the
measured parameters. Among the significant correlations projected, the leading
component, related to Eigenvector 1 (EV1) was dominated by the anti-correlation
between the Fe${\mathrm{II}}$ optical emission and [OIII] line where the EV1
alone contained 30% of the total variance. This introduced a way to define a
quasar main sequence, in close analogy to the stellar main sequence in the
Hertzsprung-Russel (HR) diagram (Sulentic et. al 2001). Which of the basic
theoretically motivated parameters of an active nucleus (Eddington ratio, black
hole mass, accretion rate, spin, and viewing angle) is the main driver behind
the EV1 yet remains to be answered. We currently limit ourselves to the optical
waveband, and concentrate on theoretical modelling the Fe${\mathrm{II}}$ to
H$\mathrm{\beta}$ ratio, and test the hypothesis that the physical driver of
EV1 is the maximum of the accretion disk temperature, reflected in the shape of
the spectral energy distribution (SED). We performed computations of the
H$\mathrm{\beta}$ and optical Fe${\mathrm{II}}$ for a broad range of SED peak
position using CLOUDY photoionisation code. We assumed that both
H$\mathrm{\beta}$ and Fe${\mathrm{II}}$ emission come from the Broad Line
Region represented as a constant density cloud in a plane-parallel geometry. We
compare the results for two different approaches: (1) considering a fixed
bolometric luminosity for the SED; (2) considering $\mathrm{L_{bol}/L_{Edd}}$ =
1.
[9]
oai:arXiv.org:1711.08926 [pdf] - 1591652
The relationship between Mg II broad emission and quasar inclination
angle
Submitted: 2017-11-24
Several observed spectral properties of quasars are believed to be influenced
by quasar orientation. In this investigation we examine the effect of
orientation on the Mg II line located at 2798 {\AA} in a sample of 36
radio-loud quasars, with orientation angles having been obtained in a previous
study using radio observations. We find no significant relationship between
orientation angle and either Mg II line full-width at half-maximum or
equivalent width. The lack of correlation with inclination angle contradicts
previous studies which also use radio data as a proxy for inclination angle and
suggests the Mg II emission region does not occupy a disk-like geometry. The
lack of correlation with Mg II equivalent width, however, is reported in at
least one previous study. Although the significance is not very strong (86
percent), there is a possible negative relationship between inclination angle
and Fe II strength which, if true, could explain the Fe II anti-correlation
with [O III ] strength associated with Eigenvector 1. Interestingly, there are
objects having almost edge-on inclinations while still exhibiting broad lines.
This could be explained by a torus which is either clumpy (allowing sight lines
to the central engine) or mis-aligned with the accretion disk.
[10]
oai:arXiv.org:1710.10180 [pdf] - 1590370
The physical driver of the optical Eigenvector 1 in Quasar Main Sequence
Submitted: 2017-10-27
Quasars are complex sources, characterized by broad band spectra from radio
through optical to X-ray band, with numerous emission and absorption features.
However, Boroson & Green (1992) used Principal Component Analysis (PCA), and
with this analysis they were able to show significant correlations between the
measured parameters. The leading component, related to Eigenvector 1 (EV1) was
dominated by the anticorrelation between the Fe${\mathrm{II}}$ optical emission
and [OIII] line and EV1 alone contained 30% of the total variance. It opened a
way in defining a quasar main sequence, in close analogy to the stellar main
sequence on the Hertzsprung-Russel (HR) diagram (Sulentic et al. 2001). The
question still remains which of the basic theoretically motivated parameters of
an active nucleus (Eddington ratio, black hole mass, accretion rate, spin, and
viewing angle) is the main driver behind the EV1. Here we limit ourselves to
the optical waveband, and concentrate on theoretical modelling the
Fe${\mathrm{II}}$ to H$\mathrm{\beta}$ ratio, and we test the hypothesis that
the physical driver of EV1 is the maximum of the accretion disk temperature,
reflected in the shape of the spectral energy distribution (SED). We performed
computations of the H$\mathrm{\beta}$ and optical Fe${\mathrm{II}}$ for a broad
range of SED peak position using CLOUDY photoionisation code. We assumed that
both H$\mathrm{\beta}$ and Fe${\mathrm{II}}$ emission come from the Broad Line
Region represented as a constant density cloud in a plane-parallel geometry. We
expected that a hotter disk continuum will lead to more efficient production of
Fe${\mathrm{II}}$ but our computations show that the Fe${\mathrm{II}}$ to
H$\mathrm{\beta}$ ratio actually drops with the rise of the disk temperature.
Thus either hypothesis is incorrect, or approximations used in our paper for
the description of the line emissivity is inadequate.
[11]
oai:arXiv.org:1706.07958 [pdf] - 1585113
Failed radiatively Accelerated Dusty Outflow model of the Broad Line
Region in Active Galactic Nuclei. I. Analytical solution
Submitted: 2017-06-24, last modified: 2017-08-22
The physical origin of the Broad Line Region in Active Galactic Nuclei is
still unclear despite many years of observational studies. The reason is that
the region is unresolved and the reverberation mapping results imply complex
velocity field. We adopt a theory-motivated approach to identify the principal
mechanism responsible for this complex phenomenon. We consider the possibility
that the role of dust is essential. We assume that the local radiation pressure
acting on the dust in the accretion disk atmosphere launches the outflow of
material, but higher above the disk the irradiation from the central parts
cause the dust evaporation and a subsequent fall back. This failed radiatively
accelerated dusty outflow (FRADO) is expected to represent the material forming
low ionization lines. In this paper we formulate simple analytical equations
describing the cloud motion, including the evaporation phase. The model is
fully described just by the basic parameters: black hole mass, accretion rate,
black hole spin and the viewing angle. We study how the spectral line generic
profiles correspond to this dynamics. We show that the virial factor calculated
from our model strongly depends on the black hole mass in case of enhanced dust
opacity, and thus it then correlates with the line width. This could explain
why the virial factor measured in galaxies with pseudo-bulges differs from that
obtained from objects with classical bulges although the trend predicted by the
current version of the model is opposite to the observed trend.
[12]
oai:arXiv.org:1705.08812 [pdf] - 1583830
Self-consistent dynamical model of the Broad Line Region
Submitted: 2017-05-24, last modified: 2017-06-14
We develope a self-consistent description of the Broad Line Region based on
the concept of the failed wind powered by the radiation pressure acting on
dusty accretion disk atmosphere in Keplerian motion. The material raised high
above the disk is illuminated, dust evaportes, and the matter falls back
towards the disk. This material is the source of emission lines. The model
predicts the inner and outer radius of the region, the cloud dynamics under the
dust radiation pressure and, subsequently, just the gravitational field of the
central black hole, which results in assymetry between the rise and fall.
Knowledge of the dynamics allows to predict the shapes of the emission lines as
functions of the basic parameters of an active nucleus: black hole mass,
accretion rate, black hole spin (or accretion efficiency) and the viewing angle
with respect to the symmetry axis. Here we show preliminary results based on
analytical approximations to the cloud motion.
[13]
oai:arXiv.org:1702.06807 [pdf] - 1561171
Characterisation of AGN from the XMM-Newton Slew Survey
Submitted: 2017-02-22
We present optical spectroscopy of candidate AGN pinpointed by a Swift
follow-up campaign on unidentified transients in the XMM-Newton Slew Survey,
increasing the completeness of the identifications of AGN in the Survey. Our
Swift follow-up campaign identified 17 XRT-detected candidate AGN, of which
nine were selected for optical follow-up and a further two were confirmed as
AGN elsewhere. Using data obtained at the William Herschel Telescope, Very
Large Telescope and New Technology Telescope, we find AGN features in seven of
the candidates. We classify six as Seyfert types 1.0 to 1.5, with broad-line
region velocities spanning 2000--12000 km s$^{-1}$, and identify one as a
possible Type II AGN, consistent with the lack of a soft band X-ray detection
in the Slew Survey. The Virial black hole mass estimates for the sample lie
between 1$\times$10$^{8}$ M$_{\odot}$ and 3$\times$10$^9$ M$_{\odot}$, with one
source likely emitting close to its Eddington rate, $L_{\rm Bol}/L_{\rm Edd}
\sim 0.9$. We find a wide redshift range of $0.08<z<0.9$ for the nine now
confirmed AGN drawn from the unidentified Slew Survey sample. One source
remaining unclassified shows outbursts rarely seen before in AGN. We conclude
that AGN discovered in this way are consistent with the largely non-varying,
Slew-selected, known AGN population. We also find parallels with XMM-Newton
Bright Serendipitous Survey AGN selected from pointed observations, and
postulate that shallow X-ray surveys select AGN drawn from the same populations
that have been characterised in deeper X-ray selected samples.
[14]
oai:arXiv.org:1606.03303 [pdf] - 1444069
Physical properties and the variability mechanism of the He I outflow in
NGC 4151
Submitted: 2016-06-10
We report on variable helium absorption lines in NGC 4151 observed across six
epochs of quasi-simultaneous near-infrared and optical data. These observations
cover the transitions from the metastable 2^3S state at 3889 A and 10830 A, and
from the 2^1S state at 20587 A. This is the first AGN absorption line
variability study to include measurements of the 20587 A line. The physical
properties of the absorber recorded at the fifth observational epoch are
relatively well constrained by the presence of absorption in both the optical
and near-infrared components, with the 10830 A line likely saturated. The
observations suggest variations in this absorber's strength are best explained
by ionization changes in response to a variable incident continuum.
Photoionization simulations constrain the total hydrogen number density of the
epoch 5 absorber to 7.1<log(n_H/cm^-3)<8.8, the hydrogen column density to
21.2<log(N_H/cm^-2)<23.3 and the ionization parameter range to -1.9<logU<0.4.
The simulations also suggest the absorber is located between 0.03 and 0.49 pc
from the continuum emission region. This range in physical properties is
consistent with an absorber of similar velocity seen in NGC 4151 from previous
ultraviolet and optical studies, but with high column density X-ray absorbing
components not present. The mass outflow rate due to the fifth epoch absorber
is in the range 0.008 to 0.38 M_sun/yr, too low to contribute to galaxy
feedback effects.
[15]
oai:arXiv.org:1501.04975 [pdf] - 941804
SDSS J1138+3517: A quasar showing remarkably variable broad absorption
lines
Submitted: 2015-01-20, last modified: 2015-03-02
We report on the highly variable SiIV and CIV broad absorption lines in SDSS
J113831.4+351725.2 across four observational epochs. Using the SiIV doublet
components, we find that the blue component is usually saturated and non-black,
with the ratio of optical depths between the two components rarely being 2:1.
This indicates that these absorbers do not fully cover the line-of-sight and
thus a simple apparent optical depth model is insufficient when measuring the
true opacity of the absorbers. Tests with inhomogeneous (power-law) and
pure-partial coverage (step-function) models of the absorbing SiIV optical
depth predict the most un-blended doublet's component profiles equally well.
However, when testing with Gaussian-fitted doublet components to all SiIV
absorbers and averaging the total absorption predicted in each doublet, the
upper limit of the power law index is mostly unconstrained. This leads us to
favour pure partial coverage as a more accurate measure of the true optical
depth than the inhomogeneous power law model.
The pure-partial coverage model indicates no significant change in covering
fraction across the epochs, with changes in the incident ionizing flux on the
absorbing gas instead being favoured as the variability mechanism. This is
supported by (a) the coordinated behaviour of the absorption troughs, (b) the
behaviour of the continuum at the blue end of the spectrum and (c) the
consistency of photoionization simulations of ionic column density dependencies
on ionization parameter with the observed variations. Evidence from the
simulations together with the CIV absorption profile indicates that the
absorber lies outside the broad line region, though the precise distance and
kinetic luminosity are not well constrained.
[16]
oai:arXiv.org:1310.5674 [pdf] - 1180109
Quasar broad absorption line variability measurements using
reconstructions of un-absorbed spectra
Submitted: 2013-10-21, last modified: 2014-07-24
We present a two-epoch Sloan Digital Sky Survey and Gemini/GMOS+William
Herschel Telescope/ISIS variability study of 50 broad absorption line quasars
of redshift range 1.9 < z < 4.2, containing 38 Si IV and 59 C IV BALs and
spanning rest-frame time intervals of approximately 10 months to 3.7 years. We
find that 35/50 quasars exhibit one or more variable BALs, with 58% of Si IV
and 46% of C IV BALs showing variability across the entire sample. On average,
Si IV BALs show larger fractional change in BAL pseudo equivalent width than C
IV BALs, as referenced to an unabsorbed continuum+emission-line spectrum
constructed using non-negative matrix factorisation. No correlation is found
between BAL variability and quasar luminosity, suggesting that ionizing
continuum changes do not play a significant role in BAL variability (assuming
the gas is in photoionization equilibrium with the ionizing continuum). A
subset of 14 quasars have one variable BAL from each of Si IV and C IV with
significant overlap in velocity space and for which variations are in the same
sense (strengthening or weakening) and which appear to be correlated (98%
confidence). We find examples of both appearing and disappearing BALs in
weaker/shallower lines with disappearance rates of 2.3% for C IV and 5.3% for
Si IV, suggesting average lifetimes of 142 and 43 years respectively. We
identify 5 objects in which the BAL is coincident with the broad emission-line,
but appears to cover only the continuum source. Assuming a clumpy inhomogeneous
absorber model and a typical size for the continuum source, we infer a maximum
cloud radius of 10^13 to 10^14 cm, assuming Eddington limited accretion.