Normalized to: Wijnen, T.
[1]
oai:arXiv.org:2004.08137 [pdf] - 2079392
Using all-sky optical observations for automated orbit determination and
prediction for satellites in Low Earth Orbit
Submitted: 2020-04-17
We have used an existing, robotic, multi-lens, all-sky camera system, coupled
to a dedicated data reduction pipeline, to automatically determine orbital
parameters of satellites in Low Earth Orbit (LEO). Each of the fixed cameras
has a Field of View of 53 x 74 degrees, while the five cameras combined cover
the entire sky down to 20 degrees from the horizon. Each of the cameras takes
an image every 6.4 seconds, after which the images are automatically processed
and stored. We have developed an automated data reduction pipeline that
recognizes satellite tracks, to pixel level accuracy ($\sim$ 0.02 degrees), and
uses their endpoints to determine the orbital elements in the form of
standardized Two Line Elements (TLEs). The routines, that use existing
algorithms such as the Hough transform and the Ransac method, can be used on
any optical dataset.
For a satellite with an unknown TLE, we need at least two overflights to
accurately predict the next one. Known TLEs can be refined with every pass to
improve collision detections or orbital decay predictions, for example. For our
current data analysis we have been focusing on satellites in LEO, where we are
able to recover between 50% and 80% of the known overpasses during twilight. We
have been able to detect LEO satellites down to 7th visual magnitude. Higher
objects, up to geosynchronous orbit, were visually observed, but are currently
not being automatically picked up by our reduction pipeline. We expect that
with further improvements to our data reduction, and potentially with longer
integration times and/or different optics, the instrumental set-up can be used
for tracking a significant fraction of satellites up to geosynchronous orbit.
[2]
oai:arXiv.org:1802.04360 [pdf] - 1736305
The consequences of a nearby supernova on the early Solar System
Submitted: 2018-02-12, last modified: 2018-04-11
If the Sun was born in a relatively compact open cluster, it is quite likely
that a massive (10MSun) star was nearby when it exploded in a supernova. The
repercussions of a supernova can be rather profound, and the current Solar
System may still bear the memory of this traumatic event. The truncation of the
Kuiper belt and the tilt of the ecliptic plane with respect to the Sun's
rotation axis could be such signatures. We simulated the effect of a nearby
supernova on the young Solar System using the Astronomical Multipurpose
Software Environment. Our calculations are realized in two subsequent steps in
which we study the effect of the supernova irradiation on the circumstellar
disk and the effect of the impact of the nuclear blast-wave which arrives a few
decades later. We find that the blastwave of our adopted supernova exploding at
a distance of $0.15$--$0.40$\,pc and at an angle of $35^\circ$--$65^\circ$ with
respect to the angular-momentum axis of the circumsolar disk would induce a
misalignment between the Sun's equator and its disk to $5^\circ.6\pm1^\circ.2$,
consistent with the current value. The blast of a supernova truncates the disk
at a radius between $42$ and $55$\,au, which is consistent with the current
edge of the Kuiper belt. For the most favored parameters, the irradiation by
the supernova as well as the blast wave heat the majority of the disk to $\sim
1200$\,K, which is sufficiently hot to melt chondrules in the circumstellar
disk. The majority of planetary system may have been affected by a nearby
supernova, some of its repercussions, such as truncation and tilting of the
disk, may still be visible in their current planetary system's topology. The
amount of material from the supernova blast wave that is accreted by the
circumstellar disk is too small by several orders of magnitude to explain the
current abundance of the short live radionuclide $^{26}$Al.
[3]
oai:arXiv.org:1707.01096 [pdf] - 1585508
Changes in orientation and shape of protoplanetary discs moving through
an ambient medium
Submitted: 2017-07-04
Misalignments between the orbital planes of planets and the equatorial planes
of their host stars have been observed in our solar system, in transiting
exoplanets, and in the orbital planes of debris discs. We present a mechanism
that causes such a spin-orbit misalignment for a protoplanetary disc due to its
movement through an ambient medium. Our physical explanation of the mechanism
is based on the theoretical solutions to the Stark problem. We test this idea
by performing self-consistent hydrodynamical simulations and simplified
gravitational $N$-body simulations. The $N$-body model reduces the mechanism to
the relevant physical processes. The hydrodynamical simulations show the
mechanism in its full extent, including gas-dynamical and viscous processes in
the disc which are not included in the theoretical framework. We find that a
protoplanetary disc embedded in a flow changes its orientation as its angular
momentum vector tends to align parallel to the relative velocity vector. Due to
the force exerted by the flow, orbits in the disc become eccentric, which
produces a net torque and consequentially changes the orbital inclination. The
tilting of the disc causes it to contract. Apart from becoming lopsided, the
gaseous disc also forms a spiral arm even if the inclination does not change
substantially. The process is most effective at high velocities and
observational signatures are therefore mostly expected in massive star-forming
regions and around winds or supernova ejecta. Our $N$-body model indicates that
the interaction with supernova ejecta is a viable explanation for the observed
spin-orbit misalignment in our solar system.
[4]
oai:arXiv.org:1706.07048 [pdf] - 1585006
Disc truncation in embedded star clusters: Dynamical encounters versus
face-on accretion
Submitted: 2017-06-21
Observations indicate that the dispersal of protoplanetary discs in star
clusters occurs on time scales of about 5 Myr. Several processes are thought to
be responsible for this disc dispersal. Here we compare two of these processes:
dynamical encounters and interaction with the interstellar medium, which
includes face-on accretion and ram pressure stripping. We perform simulations
of embedded star clusters with parameterisations for both processes to
determine the environment in which either of these processes is dominant. We
find that face-on accretion, including ram pressure stripping, is the dominant
disc truncation process if the fraction of the total cluster mass in stars is
$\lesssim 30\,\%$ regardless of the cluster mass and radius. Dynamical
encounters require stellar densities $\gtrsim 10^4$ pc$^{-3}$ combined with a
mass fraction in stars of $\approx 90\,\%$ to become the dominant process. Our
results show that during the embedded phase of the cluster, the truncation of
the discs is dominated by face-on accretion and dynamical encounters become
dominant when the intra-cluster gas has been expelled. As a result of face-on
accretion the protoplanetary discs become compact and their surface density
increases. In contrast, dynamical encounters lead to discs that are less
massive and remain larger.
[5]
oai:arXiv.org:1702.04383 [pdf] - 1581503
Characterising face-on accretion onto and the subsequent contraction of
protoplanetary discs
Submitted: 2017-02-14
Observations indicate that stars generally lose their protoplanetary discs on
a timescale of about 5 Myr. Which mechanisms are responsible for the disc
dissipation is still debated. Here we investigate the movement through an
ambient medium as a possible cause of disc dispersal. The ram pressure exerted
by the flow can truncate the disc and the accretion of material with no
azimuthal angular momentum leads to further disc contraction. We derive a
theoretical model from accretion disc theory that describes the evolution of
the disc radius, mass, and surface density profile as a function of the density
and velocity of the ambient medium. We test our model by performing
hydrodynamical simulations of a protoplanetary disc embedded in a flow with
different velocities and densities. We find that our model gives an adequate
description of the evolution of the disc radius and accretion rate onto the
disc. The total disc mass in the simulations follows the theoretically expected
trend, except at the lowest density where our simulated discs lose mass owing
to continuous stripping. This stripping may be a numerical rather than a
physical effect. Some quantitative differences exist between the model
predictions and the simulations. These are at least partly caused by numerical
viscous effects in the disc and depend on the resolution of the simulation. Our
model can be used as a conservative estimate for the process of face-on
accretion onto protoplanetary discs, as long as viscous processes in the disc
can be neglected. The model predicts that in dense gaseous environments, discs
can shrink substantially in size and can, in theory, sweep up an amount of gas
of the order of their initial mass. This process could be relevant for planet
formation in dense environments.
[6]
oai:arXiv.org:1607.01017 [pdf] - 1498327
Face-on accretion onto a protoplanetary disc
Submitted: 2016-07-04
Globular clusters (GCs) are known to harbor multiple stellar populations. To
explain these observations Bastian et al. suggested a scenario in which a
second population is formed by the accretion of enriched material onto the
low-mass stars in the initial GC population. The idea is that the low-mass,
pre-main sequence stars sweep up gas expelled by the massive stars of the same
generation into their protoplanetary disc as they move through the GC core. We
perform simulations with 2 different smoothed particle hydrodynamics codes to
investigate if a low-mass star surrounded by a protoplanetary disc can accrete
the amount of enriched material required in this scenario. We focus on the gas
loading rate onto the disc and star as well as on the lifetime of the disc. We
find that the gas loading rate is a factor of 2 smaller than the geometric
rate, because the effective cross section of the disc is smaller than its
surface area. The loading rate is consistent for both codes, irrespective of
resolution. The disc gains mass in the high resolution runs, but loses angular
momentum on a time scale of 10^4 yrs. Two effects determine the loss of
(specific) angular momentum in our simulations: 1) continuous ram pressure
stripping and 2) accretion of material with no azimuthal angular momentum. Our
study and previous work suggest that the former, dominant process is mainly
caused by numerical rather than physical effects, while the latter is not. The
latter process causes the disc to become more compact, increasing the surface
density profile at smaller radii. The disc size is determined in the first
place by the ram pressure when the flow first hits the disc. Further evolution
is governed by the decrease in the specific angular momentum of the disc. We
conclude that the size and lifetime of the disc are probably not sufficient to
accrete the amount of mass required in Bastian et al.'s scenario.
[7]
oai:arXiv.org:1512.03310 [pdf] - 1325487
Empirical consequential angular momentum loss can solve long standing
problems of CV evolution
Submitted: 2015-12-10
The observed orbital period distribution of cataclysmic variables (CVs), the
space density derived from observations, and the observed orbital period
minimum are known to disagree with theoretical predictions since decades. More
recently, the white dwarf (WD) masses in CVs have been found to significantly
exceed those of single WDs, which is in contrast to theoretical expectations as
well. We here claim that all these problems are related and can be solved if
CVs with low-mass white dwarfs are driven into dynamically unstable mass
transfer due to consequential angular momentum loss (CAML). Indeed, assuming
CAML increases as a function of decreasing white dwarf mass can bring into
agreement the predictions of binary population models and the observed
properties of the CV population. We speculate that a common envelope like
evolution of CVs with low-mass WDs following a nova eruption might be the
physical process behind our empirical prescription of CAML.
[8]
oai:arXiv.org:1510.04294 [pdf] - 1300403
Three in one go: consequential angular momentum loss can solve major
problems of CV evolution
Submitted: 2015-10-14
The average white dwarf (WD) masses in cataclysmic variables (CVs) have been
measured to significantly exceed those of single WDs, which is the opposite of
what is theoretically expected. We present the results of binary population
synthesis models taking into account consequential angular momentum loss (CAML)
that is assumed to increase with decreasing WD mass. This approach can not only
solve the WD mass problem, but also brings in agreement theoretical predictions
and observations of the orbital period distribution and the space density of
CVs. We speculate that frictional angular momentum loss following nova
eruptions might cause such CAML and could thus be the missing ingredient of CV
evolution.
[9]
oai:arXiv.org:1503.05197 [pdf] - 1043169
White dwarf masses in cataclysmic variables
Submitted: 2015-03-17, last modified: 2015-04-16
The white dwarf (WD) mass distribution of cataclysmic variables (CVs) has
recently been found to dramatically disagree with the predictions of the
standard CV formation model. The high mean WD mass among CVs is not imprinted
in the currently observed sample of CV progenitors and cannot be attributed to
selection effects. Two possibilities have been put forward: either the WD grows
in mass during CV evolution, or in a significant fraction of cases, CV
formation is preceded by a (short) phase of thermal time-scale mass transfer
(TTMT) in which the WD gains a sufficient amount of mass. We investigate if
either of these two scenarios can bring theoretical predictions and
observations into agreement. We employed binary population synthesis models to
simulate the present intrinsic CV population. We incorporated aspects specific
to CV evolution such as an appropriate mass-radius relation of the donor star
and a more detailed prescription for the critical mass ratio for dynamically
unstable mass transfer. We also implemented a previously suggested wind from
the surface of the WD during TTMT and tested the idea of WD mass growth during
the CV phase by arbitrarily changing the accretion efficiency. We compare the
model predictions with the characteristics of CVs derived from observed
samples. We find that mass growth of the WDs in CVs fails to reproduce the
observed WD mass distribution. In the case of TTMT, we are able to produce a
large number of massive WDs if we assume significant mass loss from the surface
of the WD during the TTMT phase. However, the model still produces too many CVs
with helium WDs. Moreover, the donor stars are evolved in many of these
post-TTMT CVs, which contradicts the observations. We conclude that in our
current framework of CV evolution neither TTMT nor WD mass growth can fully
explain either the observed WD mass or the period distribution in CVs.
[10]
oai:arXiv.org:1406.0895 [pdf] - 1937963
First results from the FPGA/NIOS Adaptive FIR Filter Using Linear
Prediction Implemented in the AERA Radio Stations to Reduce Narrow Band RFI
for Radio Detection of Cosmic Rays
Submitted: 2014-06-03
The FPGA/NIOS FIR filter based on linear prediction (LP) to suppress radio
frequency interference (RFI) has been installed in several radio stations in
the Auger Engineering Radio Array (AERA) experiment. AERA observes coherent
radio emission from extensive air showers induced by ultra-high-energy cosmic
rays to make a detailed study of the development of the electromagnetic part of
air showers. Radio signals provide complementary information to that obtained
from Auger surface detectors, which are predominantly sensitive to the particle
content of an air shower at the surface. The radio signals from air showers are
caused by the coherent emission due to geomagnetic and charge-excess processes.
These emissions can be observed in the frequency band between 10 - 100 MHz.
However, this frequency range is significantly contaminated by narrow-band RFI
and other human-made distortions. A FIR filter implemented in the FPGA logic
segment of the front-end electronics of a radio sensor significantly improves
the signal-to-noise ratio.
In this paper we present first results of the efficiency of the adaptive LP
FIR filter, deployed in real AERA station on pampas, with a comparison to the
currently used IIR notch filter with constant coefficients. The laboratory
tests confirms the stability of the filter. Using constant LP coefficients the
suppression efficiency remains the same for hours, which corresponds to more
than $\bf 10^{12}$ clock cycles. We compared in real conditions several
variants of the LP FIR filter with various lengths and various coefficients
widths (due to fixed-point representations in the FPGA logic) with the aim to
minimize the power consumption for the radio station while keeping sufficient
accuracy for noise reduction.