Understanding how energy is released in flares is one of the central problems of solar and stellar astrophysics. Observations of high temperature flare plasma hold many potential clues as to the nature of this energy release. It is clear, however, that flares are not composed of a few impulsively heated loops, but are the result of heating on many small-scale threads that are energized over time, making it difficult to compare observations and numerical simulations in detail. Several previous studies have shown that it is possible to reproduce some aspects of the observed emission by considering the flare as a sequence of independently heated loops, but these studies generally focus on small-scale features while ignoring the global features of the flare. In this paper, we develop a multithreaded model that encompasses the time-varying geometry and heating rate for a series of successively-heated loops comprising an arcade. To validate, we compare with spectral observations of five flares made with the MinXSS CubeSat as well as light curves measured with GOES/XRS and SDO/AIA. We show that this model can successfully reproduce the light curves and quasi-periodic pulsations in GOES/XRS, the soft X-ray spectra seen with MinXSS, and the light curves in various AIA passbands. The AIA light curves are most consistent with long duration heating, but elemental abundances cannot be constrained with the model. Finally, we show how this model can be used to extrapolate to spectra of extreme events that can predict irradiance across a wide wavelength range including unobserved wavelengths.

The National Science Foundation (NSF) Daniel K. Inouye Solar Telescope (DKIST) is about to start operations at the summit of Haleakala (Hawaii). DKIST will join the early science phases of the NASA and ESA Parker Solar Probe and Solar Orbiter encounter missions. By combining in-situ measurements of the near-sun plasma environment and detail remote observations of multiple layers of the Sun, the three observatories form an unprecedented multi-messenger constellation to study the magnetic connectivity inside the solar system. This white paper outlines the synergistic science that this multi-messenger suite enables.

Plasma outflows from the edges of active regions have been suggested as a possible source of the slow solar wind. Spectroscopic measurements show that these outflows have an enhanced elemental composition, which is a distinct signature of the slow wind. Current spectroscopic observations, however, do not have sufficient spatial resolution to distinguish what structures are being measured or to determine the driver of the outflows. The High-resolution Coronal Imager (Hi-C) flew on a sounding rocket in May, 2018, and observed areas of active region outflow at the highest spatial resolution ever achieved (250 km). Here we use the Hi-C data to disentangle the outflow composition signatures observed with the Hinode satellite during the flight. We show that there are two components to the outflow emission: a substantial contribution from expanded plasma that appears to have been expelled from closed loops in the active region core, and a second contribution from dynamic activity in active region plage, with a composition signature that reflects solar photospheric abundances. The two competing drivers of the outflows may explain the variable composition of the slow solar wind.

Following the success of the first mission, the High-Resolution Coronal Imager (Hi-C) was launched for a third time (Hi-C 2.1) on 29th May 2018 from the White Sands Missile Range, NM, USA. On this occasion, 329 seconds of 17.2 nm data of target active region AR 12712 was captured with a cadence of ~4s, and a plate scale of 0.129''/pixel. Using data captured by Hi-C 2.1 and co-aligned observations from SDO/AIA 17.1 nm we investigate the widths of 49 coronal strands. We search for evidence of substructure within the strands that is not detected by AIA, and further consider whether these strands are fully resolved by Hi-C 2.1. With the aid of Multi-Scale Gaussian Normalization (MGN), strands from a region of low-emission that can only be visualized against the contrast of the darker, underlying moss are studied. A comparison is made between these low-emission strands with those from regions of higher emission within the target active region. It is found that Hi-C 2.1 can resolve individual strands as small as ~202km, though more typical strands widths seen are ~513km. For coronal strands within the region of low-emission, the most likely width is significantly narrower than the high-emission strands at ~388km. This places the low-emission coronal strands beneath the resolving capabilities of SDO/AIA, highlighting the need of a permanent solar observatory with the resolving power of Hi-C.

We present high-resolution, high-cadence observations of six, fine-scale, on-disk jet-like events observed by the High-resolution Coronal Imager 2.1 (Hi-C 2.1) during its sounding-rocket flight. We combine the Hi-C 2.1 images with images from SDO/AIA, and IRIS, and investigate each event's magnetic setting with co-aligned line-of-sight magnetograms from SDO/HMI. We find that: (i) all six events are jetlet-like (having apparent properties of jetlets), (ii) all six are rooted at edges of magnetic network lanes, (iii) four of the jetlet-like events stem from sites of flux cancelation between majority-polarity network flux and merging minority-polarity flux, and (iv) four of the jetlet-like events show brightenings at their bases reminiscent of the base brightenings in coronal jets. The average spire length of the six jetlet-like events (9,000$\pm$3000km) is three times shorter than that for IRIS jetlets (27,000$\pm$8000km). While not ruling out other generation mechanisms, the observations suggest that at least four of these events may be miniature versions of both larger-scale coronal jets that are driven by minifilament eruptions and still-larger-scale solar eruptions that are driven by filament eruptions. Therefore, we propose that our Hi-C events are driven by the eruption of a tiny sheared-field flux rope, and that the flux-rope field is built and triggered to erupt by flux cancelation.

The second Hi-C flight (Hi-C2.1) provided unprecedentedly-high spatial and temporal resolution ($\sim$250km, 4.4s) coronal EUV images of Fe IX/X emission at 172 \AA, of AR 12712 on 29-May-2018, during 18:56:21-19:01:56 UT. Three morphologically-different types (I: dot-like, II: loop-like, III: surge/jet-like) of fine-scale sudden-brightening events (tiny microflares) are seen within and at the ends of an arch filament system in the core of the AR. Although type Is (not reported before) resemble IRIS-bombs (in size, and brightness wrt surroundings), our dot-like events are apparently much hotter, and shorter in span (70s). We complement the 5-minute-duration Hi-C2.1 data with SDO/HMI magnetograms, SDO/AIA EUV images, and IRIS UV spectra and slit-jaw images to examine, at the sites of these events, brightenings and flows in the transition-region and corona and evolution of magnetic flux in the photosphere. Most, if not all, of the events are seated at sites of opposite-polarity magnetic flux convergence (sometimes driven by adjacent flux emergence), implying likely flux cancellation at the microflare's polarity inversion line. In the IRIS spectra and images, we find confirming evidence of field-aligned outflow from brightenings at the ends of loops of the arch filament system. In types I and II the explosion is confined, while in type III the explosion is ejective and drives jet-like outflow. The light-curves from Hi-C, AIA and IRIS peak nearly simultaneously for many of these events and none of the events display a systematic cooling sequence as seen in typical coronal flares, suggesting that these tiny brightening-events have chromospheric/transition-region origin.

The third flight of the High-Resolution Coronal Imager (Hi-C 2.1) occurred on May 29, 2018, the Sounding Rocket was launched from White Sands Missile Range in New Mexico. The instrument has been modified from its original configuration (Hi-C 1) to observe the solar corona in a passband that peaks near 172 Angstrom and uses a new, custom-built low-noise camera. The instrument targeted Active Region 12712, and captured 78 images at a cadence of 4.4 sec (18:56:22 - 19:01:57 UT; 5 min and 35 sec observing time). The image spatial resolution varies due to quasi-periodic motion blur from the rocket; sharp images contain resolved features of at least 0.47 arcsec. There are coordinated observations from multiple ground- and space-based telescopes providing an unprecedented opportunity to observe the mass and energy coupling between the chromosphere and the corona. Details of the instrument and the data set are presented in this paper.

The relative amount of high temperature plasma has been found to be a useful diagnostic to determine the frequency of coronal heating on sub-resolution structures. When the loops are infrequently heated, a broad emission measure (EM) over a wider range of temperatures is expected. A narrower EM is expected for high frequency heating where the loops are closer to equilibrium. The soft X-ray spectrum contains many spectral lines that provide high temperature diagnostics, including lines from Fe XVII-XIX. This region of the solar spectrum will be observed by the Marshall Grazing Incidence Spectrometer (MaGIXS) in 2020. In this paper, we derive the expected spectral lines intensity in MaGIXS to varying amounts of high temperature plasma to demonstrate that a simple line ratio of these provides a powerful diagnostic to determine the heating frequency. Similarly, we examine ratios of AIA channel intensities, filter ratios from a XRT, and energy bands from the FOXSI sounding rocket to determine their sensitivity to this parameter. We find that both FOXSI and MaGIXS provide good diagnostic capability for high-temperature plasma. We then compare the predicted line ratios to the output of a numerical model and confirm the MaGIXS ratios provide an excellent diagnostic for heating frequency.

Solar flare X-ray spectra are typically dominated by thermal bremsstrahlung emission in the soft X-ray ($\lesssim$10 keV) energy range; for hard X-ray energies ($\gtrsim$30 keV), emission is typically non-thermal from beams of electrons. The low-energy extent of non-thermal emission has only been loosely quantified. It has been difficult to obtain a lower limit for a possible non-thermal cutoff energy due to the significantly dominant thermal emission. Here we use solar flare data from the EUV Variability Experiment (EVE) on-board the Solar Dynamics Observatory (SDO) and X-ray data from the Reuven Ramaty High Energy Spectroscopic Imager (RHESSI) to calculate the Differential Emission Measure (DEM). This improvement over the isothermal approximation and any single-instrument DEM helps to resolve ambiguities in the range where thermal and non-thermal emission overlap, and to provide constraints on the low-energy cutoff. In the model, thermal emission is from a DEM that is parametrized as multiple gaussians in $Log(T)$. Non-thermal emission results from a photon spectrum obtained using a thick-target emission model. Spectra for both instruments are fit simultaneously in a self-consistent manner. Our results have been obtained using a sample of 52 large (GOES X- and M-class) solar flares observed between February 2011 and February 2013. It turns out that it is often possible to determine low-energy cutoffs early (in the first two minutes) during large flares. Cutoff energies are typically low, less than 10 keV, with most values of the lower limits in the 5--7 keV range.

The second Miniature X-ray Solar Spectrometer (MinXSS-2) CubeSat, which begins its flight in late 2018, builds on the success of MinXSS-1, which flew from 2016-05-16 to 2017-05-06. The science instrument is more advanced -- now capable of greater dynamic range with higher energy resolution. More data will be captured on the ground than was possible with MinXSS-1 thanks to a sun-synchronous, polar orbit and technical improvements to both the spacecraft and the ground network. Additionally, a new open-source beacon decoder for amateur radio operators is available that can automatically forward any captured MinXSS data to the operations and science team. While MinXSS-1 was only able to downlink about 1 MB of data per day corresponding to a data capture rate of about 1%, MinXSS-2 will increase that by at least a factor of 6. This increase of data capture rate in combination with the mission's longer orbital lifetime will be used to address new science questions focused on how coronal soft X-rays vary over solar cycle timescales and what impact those variations have on the earth's upper atmosphere.

Understanding the relationship between the magnetic field and coronal heating is one of the central problems of solar physics. However, studies of the magnetic properties of impulsively heated loops have been rare. We present results from a study of 34 evolving coronal loops observed in the Fe XVIII line component of AIA/SDO 94 A filter images from three active regions with different magnetic conditions. We show that the peak intensity per unit cross-section of the loops depends on their individual magnetic and geometric properties. The intensity scales proportionally to the average field strength along the loop ($B_{avg}$) and inversely with the loop length ($L$) for a combined dependence of $(B_{avg}/L)^{0.52\pm0.13}$. These loop properties are inferred from magnetic extrapolations of the photospheric HMI/SDO line-of-sight and vector magnetic field in three approximations: potential and two Non Linear Force-Free (NLFF) methods. Through hydrodynamic modeling (EBTEL model) we show that this behavior is compatible with impulsively heated loops with a volumetric heating rate that scales as $\epsilon_H\sim B_{avg}^{0.3\pm0.2}/L^{0.2\pm^{0.2}_{0.1}}$.

We present a new coalignment method for the EUV Imaging Spectrometer (EIS) on board the Hinode spacecraft. In addition to the pointing offset and spacecraft jitter, this method determines the roll angle of the instrument, which has never been systematically measured, and is therefore usually not corrected. The optimal pointing for EIS is computed by maximizing the cross-correlations of the Fe XII 195.119 \r{A} line with images from the 193 \r{A} band of the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). By coaligning 3336 rasters with high signal-to-noise ratio, we estimate the rotation angle between EIS and AIA and explore the distribution of its values. We report an average value of (-0.387 $\pm$ 0.007)\deg. We also provide a software implementation of this method that can be used to coalign any EIS raster.

Understanding the dynamics of the solar chromosphere is crucial to understanding energy transport across the solar atmosphere. The chromosphere is optically thick at many wavelengths and described by non-local thermodynamic equilibrium (NLTE), making it difficult to interpret observations. Furthermore, there is considerable evidence that the atmosphere is filamented, and that current instruments do not sufficiently resolve small scale features. In flares, it is likely that multithreaded models are required to describe the heating. The combination of NLTE effects and multithreaded modeling requires computationally demanding calculations, which has motivated the development of a model that can efficiently treat both. We describe the implementation of a solver in a hydrodynamic code for the hydrogen level populations that approximates the NLTE solutions. We derive an accurate electron density across the atmosphere, that includes the effects of non-equilibrium ionization for helium and metals. We show the effects on hydrodynamic simulations, which are used to synthesize light curves using a post-processing radiative transfer code. We demonstrate the utility of this model on IRIS observations of a small flare. We show that the Doppler shifts in Mg II, C II, and O I can be explained with a multithreaded model of loops subjected to electron beam heating, so long as NLTE effects are treated. The intensities, however, do not match observed values very well, which is due to assumptions about the initial atmosphere. We briefly show how altering the initial atmosphere can drastically alter line profiles, and therefore derived quantities, and suggest that it should be tuned to pre-flare observations.

We present an overview of high resolution quiet Sun observations, from disk center to the limb, obtained with the Atacama Large mm and sub-mm Array (ALMA) at 3 mm. Seven quiet Sun regions were observed with resolution of up to 2.5" by 4.5". We produced both average and snapshot images by self-calibrating the ALMA visibilities and combining the interferometric images with full disk solar images. The images show well the chromospheric network, which, based on the unique segregation method we used, is brighter than the average over the fields of view of the observed regions by $\sim 305$ K while the intranetwork is less bright by $\sim 280$ K, with a slight decrease of the network/intranetwork contrast toward the limb. At 3 mm the network is very similar to the 1600 \AA\ images, with somewhat larger size. We detected for the first time spicular structures, rising up to 15" above the limb with a width down to the image resolution and brightness temperature of $\sim$ 1800 K above the local background. No trace of spicules, either in emission or absorption, was found on the disk. Our results highlight ALMA's potential for the study of the quiet chromosphere.

Information about the physical properties of astrophysical objects cannot be measured directly but is inferred by interpreting spectroscopic observations in the context of atomic physics calculations. Ratios of emission lines, for example, can be used to infer the electron density of the emitting plasma. Similarly, the relative intensities of emission lines formed over a wide range of temperatures yield information on the temperature structure. A critical component of this analysis is understanding how uncertainties in the underlying atomic physics propagates to the uncertainties in the inferred plasma parameters. At present, however, atomic physics databases do not include uncertainties on the atomic parameters and there is no established methodology for using them even if they did. In this paper we develop simple models for the uncertainties in the collision strengths and decay rates for Fe XIII and apply them to the interpretation of density sensitive lines observed with the EUV Imagining spectrometer (EIS) on Hinode. We incorporate these uncertainties in a Bayesian framework. We consider both a pragmatic Bayesian method where the atomic physics information is unaffected by the observed data, and a fully Bayesian method where the data can be used to probe the physics. The former generally increases the uncertainty in the inferred density by about a factor of 5 compared with models that incorporate only statistical uncertainties. The latter reduces the uncertainties on the inferred densities, but identifies areas of possible systematic problems with either the atomic physics or the observed intensities.

We analyze the X-ray spectra of 19 main sequence stars observed by Chandra using its LETGS configuration. Emission measure (EM) distributions are computed based on emission line measurements, an analysis that also yields evaluations of coronal abundances. The use of newer atomic physics data results in significant changes compared to past published analyses. The stellar EM distributions correlate with surface X-ray flux (F_X) in a predictable way, regardless of spectral type. Thus, we provide EM distributions as a function of F_X, which can be used to estimate the EM distribution of any main sequence star with a measured broadband X-ray luminosity. Comparisons are made with solar EM distributions, both full-disk distributions and spatially resolved ones from active regions (ARs), flares, and the quiet Sun. For moderately active stars, the slopes and magnitudes of the EM distributions are in excellent agreement with those of solar ARs for log T<6.6, suggesting that such stars have surfaces completely filled with solar-like ARs. A stellar surface covered with solar X-class flares yields a reasonable approximation for the EM distributions of the most active stars. Unlike the EM distributions, coronal abundances are very spectral-type dependent, and we provide relations with surface temperature for both relative and absolute abundances. Finally, the coronal abundances of the exoplanet host star Tau Boo A (F7 V) are anomalous, and we propose that this is due to the presence of the exoplanet.

Properties of the Sun's interior can be determined accurately from helioseismological measurements of solar oscillations. These measurements, however, are in conflict with photospheric elemental abundances derived using 3-D hydrodynamic models of the solar atmosphere. This divergence of theory and helioseismology is known as the $"$solar modeling problem$"$. One possible solution is that the photospheric neon abundance, which is deduced indirectly by combining the coronal Ne/O ratio with the photospheric O abundance, is larger than generally accepted. There is some support for this idea from observations of cool stars. The Ne/O abundance ratio has also been found to vary with the solar cycle in the slowest solar wind streams and coronal streamers, and the variation from solar maximum to minimum in streamers ($\sim$0.1 to 0.25) is large enough to potentially bring some of the solar models into agreement with the seismic data. Here we use daily-sampled observations from the EUV Variability Experiment (EVE) on the Solar Dynamics Observatory taken in 2010--2014, to investigate whether the coronal Ne/O abundance ratio shows a variation with the solar cycle when the Sun is viewed as a star. We find only a weak dependence on, and moderate anti-correlation with, the solar cycle with the ratio measured around 0.2--0.3 MK falling from 0.17 at solar minimum to 0.11 at solar maximum. The effect is amplified at higher temperatures (0.3--0.6 MK) with a stronger anti-correlation and the ratio falling from 0.16 at solar minimum to 0.08 at solar maximum. The values we find at solar minimum are too low to solve the solar modeling problem.

It is widely believed that loops observed in the solar atmosphere trace out magnetic field lines. However, the degree to which magnetic field extrapolations yield field lines that actually do follow loops has yet to be studied systematically. In this paper we apply three different extrapolation techniques - a simple potential model, a NLFF model based on photospheric vector data, and a NLFF model based on forward fitting magnetic sources with vertical currents - to 15 active regions that span a wide range of magnetic conditions. We use a distance metric to assess how well each of these models is able to match field lines to the 12,202 loops traced in coronal images. These distances are typically 1-2". We also compute the misalignment angle between each traced loop and the local magnetic field vector, and find values of 5-12$^\circ$. We find that the NLFF models generally outperform the potential extrapolation on these metrics, although the differences between the different extrapolations are relatively small. The methodology that we employ for this study suggests a number of ways that both the extrapolations and loop identification can be improved.

Solar flares form and release energy across a large number of magnetic loops. The global parameters of flares, such as the total energy released, duration, physical size, etc., are routinely measured, and the hydrodynamics of a coronal loop subjected to intense heating have been extensively studied. It is not clear, however, how many loops comprise a flare, nor how the total energy is partitioned between them. In this work, we employ a hydrodynamic model to better understand the energy partition by synthesizing Si IV and Fe XXI line emission and comparing to observations of these lines with IRIS. We find that the observed temporal evolution of the Doppler shifts holds important information on the heating duration. To demonstrate this we first examine a single loop model, and find that the properties of chromospheric evaporation seen in Fe XXI can be reproduced by loops heated for long durations, while persistent red-shifts seen in Si IV cannot be reproduced by any single loop model. We then examine a multi-threaded model, assuming both a fixed heating duration on all loops, and a distribution of heating durations. For a fixed heating duration, we find that durations of 100 -- 200 s do a fair job of reproducing both the red- and blue-shifts, while a distribution of durations, with a median of about 50 -- 100 s, does a better job. Finally, we compare our simulations directly to observations of an M-class flare seen by IRIS, and find good agreement between the modeled and observed values given these constraints.

Coronal cavities have previously been observed associated with long-lived quiescent filaments and are thought to correspond to the associated magnetic flux rope. Although the standard flare model predicts a coronal cavity corresponding to the erupting flux rope, these have only been observed using broadband imaging data, restricting analysis to the plane-of-sky. We present a unique set of spectroscopic observations of an active region filament seen erupting at the solar limb in the extreme ultraviolet (EUV). The cavity erupted and expanded rapidly, with the change in rise phase contemporaneous with an increase in non-thermal electron energy flux of the associated flare. Hot and cool filamentary material was observed to rise with the erupting flux rope, disappearing suddenly as the cavity appeared. Although strongly blue-shifted plasma continued to be observed flowing from the apex of the erupting flux rope, this outflow soon ceased. These results indicate that the sudden injection of energy from the flare beneath forced the rapid eruption and expansion of the flux rope, driving strong plasma flows which resulted in the eruption of an under-dense filamentary flux rope.

The elemental composition in the coronae of low-activity solar-like stars appears to be related to fundamental stellar properties such as rotation, surface gravity, and spectral type. Here we use full-Sun observations from the Solar Dynamics Observatory, to show that when the Sun is observed as a star, the variation of coronal composition is highly correlated with a proxy for solar activity, the F10.7 cm radio flux, and therefore with the solar cycle phase. Similar cyclic variations should therefore be detectable spectroscopically in X-ray observations of solar analogs. The plasma composition in full-disk observations of the Sun is related to the evolution of coronal magnetic field activity. Our observations therefore introduce an uncertainty into the nature of any relationship between coronal composition and fixed stellar properties. The results highlight the importance of systematic full-cycle observations for understanding the elemental composition of solar-like stellar coronae.

The chemical composition of solar and stellar atmospheres differs from that of their photospheres. Abundances of elements with low first ionization potential (FIP) are enhanced in the corona relative to high FIP elements with respect to the photosphere. This is known as the FIP effect and it is important for understanding the flow of mass and energy through solar and stellar atmospheres. We used spectroscopic observations from the Extreme-ultraviolet Imaging Spectrometer (EIS) onboard the Hinode observatory to investigate the spatial distribution and temporal evolution of coronal plasma composition within solar emerging flux regions inside a coronal hole. Plasma evolved to values exceeding those of the quiet Sun corona during the emergence/early decay phase at a similar rate for two orders of magnitude in magnetic flux, a rate comparable to that observed in large active regions containing an order of magnitude more flux. During the late decay phase, the rate of change was significantly faster than what is observed in large, decaying active regions. Our results suggest that the rate of increase during the emergence/early decay phase is linked to the fractionation mechanism leading to the FIP effect, whereas the rate of decrease during the later decay phase depends on the rate of reconnection with the surrounding magnetic field and its plasma composition.

We report on the structure and evolution of a current sheet that formed in the wake of an eruptive X8.3 flare observed at the west limb of the Sun on September 10, 2017. Using observations from the EUV Imaging Spectrometer (EIS) on Hinode and the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO), we find that plasma in the current sheet reaches temperatures of about 20 MK and that the range of temperatures is relatively narrow. The highest temperatures occur at the base of the current sheet, in the region near the top of the post-flare loop arcade. The broadest high temperature line profiles, in contrast, occur at the largest observed heights. Further, line broadening is strong very early in the flare and diminishes over time. The current sheet can be observed in the AIA 211 and 171 channels, which have a considerable contribution from thermal bremsstrahlung at flare temperatures. Comparisons of the emission measure in these channels with other EIS wavelengths and AIA channels dominated by Fe line emission indicate a coronal composition and suggest that the current sheet is formed by the heating of plasma already in the corona. Taken together, these observations suggest that some flare heating occurs in the current sheet while additional energy is released as newly reconnected field lines relax and become more dipolar.

We present new measurements of the dependence of the Extreme Ultraviolet radiance on the total magnetic flux in active regions as obtained from the Atmospheric Imaging Assembly (AIA) and the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory (SDO). Using observations of nine active regions tracked along different stages of evolution, we extend the known radiance - magnetic flux power-law relationship ($I\propto\Phi^{\alpha}$) to the AIA 335 \AA\ passband, and the Fe XVIII 93.93 \AA\ spectral line in the 94 \AA\ passband. We find that the total unsigned magnetic flux divided by the polarity separation ($\Phi/D$) is a better indicator of radiance for the Fe XVIII line with a slope of $\alpha=3.22\pm0.03$. We then use these results to test our current understanding of magnetic flux evolution and coronal heating. We use magnetograms from the simulated decay of these active regions produced by the Advective Flux Transport (AFT) model as boundary conditions for potential extrapolations of the magnetic field in the corona. We then model the hydrodynamics of each individual field line with the Enthalpy-based Thermal Evolution of Loops (EBTEL) model with steady heating scaled as the ratio of the average field strength and the length ($\bar{B}/L$) and render the Fe XVIII and 335 \AA\ emission. We find that steady heating is able to partially reproduce the magnitudes and slopes of the EUV radiance - magnetic flux relationships and discuss how impulsive heating can help reconcile the discrepancies. This study demonstrates that combined models of magnetic flux transport, magnetic topology and heating can yield realistic estimates for the decay of active region radiances with time.

In this study we synthesize the results of four previous studies on the global energetics of solar flares and associated coronal mass ejections (CMEs), which include magnetic, thermal, nonthermal, and CME energies in 399 solar M and X-class flare events observed during the first 3.5 years of the Solar Dynamics Observatory (SDO) mission. Our findings are: (1) The sum of the mean nonthermal energy of flare-accelerated particles ($E_{\mathrm{nt}}$), the energy of direct heating ($E_{\mathrm{dir}}$), and the energy in coronal mass ejections ($E_{\mathrm{CME}}$), which are the primary energy dissipation processes in a flare, is found to have a ratio of $(E_{\mathrm{nt}}+E_{\mathrm{dir}}+ E_{\mathrm{CME}})/E_{\mathrm{mag}} = 0.87 \pm 0.18$, compared with the dissipated magnetic free energy $E_{\mathrm{mag}}$, which confirms energy closure within the measurement uncertainties and corroborates the magnetic origin of flares and CMEs; (2) The energy partition of the dissipated magnetic free energy is: $0.51\pm0.17$ in nonthermal energy of $\ge 6$ keV electrons, $0.17\pm0.17$ in nonthermal $\ge 1$ MeV ions, $0.07\pm0.14$ in CMEs, and $0.07\pm0.17$ in direct heating; (3) The thermal energy is almost always less than the nonthermal energy, which is consistent with the thick-target model; (4) The bolometric luminosity in white-light flares is comparable with the thermal energy in soft X-rays (SXR); (5) Solar Energetic Particle (SEP) events carry a fraction $\approx 0.03$ of the CME energy, which is consistent with CME-driven shock acceleration; and (6) The warm-target model predicts a lower limit of the low-energy cutoff at $e_c \approx 6$ keV, based on the mean differential emission measure (DEM) peak temperature of $T_e=8.6$ MK during flares. This work represents the first statistical study that establishes energy closure in solar flare/CME events.

Solar flares are driven by the release of magnetic energy from reconnection events in the solar corona, whereafter energy is transported to the chromosphere, heating the plasma and causing the characteristic radiative losses. In the collisional thick-target model, electrons accelerated to energies exceeding 10 keV traverse the corona and impact the chromosphere, where they deposit their energy through collisions with the much denser plasma in the lower atmosphere. While there are undoubtedly high energy non-thermal electrons accelerated in flares, it is unclear whether these electron beams are the sole mechanism of energy transport, or whether they only dominate in certain phases of the flare's evolution. Alfv\'enic waves are generated during the post-reconnection relaxation of magnetic field lines, so it is important to examine their role in energy transport.

Decades of astrophysical observations have convincingly shown that soft X-ray (SXR; ~0.1--10 keV) emission provides unique diagnostics for the high temperature plasmas observed in solar flares and active regions. SXR observations critical for constraining models of energy release in these phenomena can be provided using instruments that have already been flown on sounding rockets and CubeSats, including miniaturized high-resolution photon-counting spectrometers and a novel diffractive spectral imager. These instruments have relatively low cost and high TRL, and would complement a wide range of mission concepts. In this white paper, we detail the scientific background and open questions motivating these instruments, the measurements required, and the instruments themselves that will make groundbreaking progress in answering these questions.

Measuring the temperature structure of the solar atmosphere is critical to understanding how it is heated to high temperatures. Unfortunately, the temperature of the upper atmosphere cannot be observed directly, but must be inferred from spectrally resolved observations of individual emission lines that span a wide range of temperatures. Such observations are "inverted" to determine the distribution of plasma temperatures along the line of sight. This inversion is ill-posed and, in the absence of regularization, tends to produce wildly oscillatory solutions. We introduce the application of sparse Bayesian inference to the problem of inferring the temperature structure of the solar corona. Within a Bayesian framework a preference for solutions that utilize a minimum number of basis functions can be encoded into the prior and many ad hoc assumptions can be avoided. We demonstrate the efficacy of the Bayesian approach by considering a test library of 40 assumed temperature distributions.

Recent observations from the Interface Region Imaging Spectrograph (IRIS) have discovered a new class of numerous low-lying dynamic loop structures, and it has been argued that they are the long-postulated unresolved fine structures (UFS) that dominate the emission of the solar transition region. In this letter, we combine IRIS measurements of the properties of a sample of 108 UFS (intensities, lengths, widths, lifetimes) with 1-D non-equilibrium ionization simulations using the HYDRAD hydrodynamic model to examine whether the UFS are now truly spatially resolved in the sense of being individual structures rather than composed of multiple magnetic threads. We find that a simulation of an impulsively heated single strand can reproduce most of the observed properties suggesting that the UFS may be resolved, and the distribution of UFS widths implies that they are structured on a spatial scale of 133km on average. Spatial scales of a few hundred km appear to be typical for a range of chromospheric and coronal structures, and we conjecture that this could be an important clue to the coronal heating process.

Results from the Solar Maximum Mission showed a close connection between the hard X-ray and transition region emission in solar flares. Analogously, the modern combination of RHESSI and IRIS data can inform the details of heating processes in ways never before possible. We study a small event that was observed with RHESSI, IRIS, SDO, and Hinode, allowing us to strongly constrain the heating and hydrodynamical properties of the flare, with detailed observations presented in a previous paper. Long duration red-shifts of transition region lines observed in this event, as well as many other events, are fundamentally incompatible with chromospheric condensation on a single loop. We combine RHESSI and IRIS data to measure the energy partition among the many magnetic strands that comprise the flare. Using that observationally determined energy partition, we show that a proper multi-threaded model can reproduce these red-shifts in magnitude, duration, and line intensity, while simultaneously being well constrained by the observed density, temperature, and emission measure. We comment on the implications for both RHESSI and IRIS observations of flares in general, namely that: (1) a single loop model is inconsistent with long duration red-shifts, among other observables; (2) the average time between energization of strands is less than 10 seconds, which implies that for a hard X-ray burst lasting ten minutes, there were at least 60 strands within a single IRIS pixel located on the flare ribbon; (3) the majority of these strands were explosively heated with energy distribution well described by a power law of slope $\approx -1.6$; (4) the multi-stranded model reproduces the observed line profiles, peak temperatures, differential emission measure distributions, and densities.

We exploit the high spatial resolution and high cadence of the Interface Region Imaging Spectrograph (IRIS) to investigate the response of the transition region and chromosphere to energy deposition during a small flare. Simultaneous observations from RHESSI provide constraints on the energetic electrons precipitating into the flare footpoints while observations of XRT, AIA, and EIS allow us to measure the temperatures and emission measures from the resulting flare loops. We find clear evidence for heating over an extended period on the spatial scale of a single IRIS pixel. During the impulsive phase of this event the intensities in each pixel for the Si IV 1402.770, C II 1334.535, Mg II 2796.354 and O I 1355.598 emission lines are characterized by numerous, small-scale bursts typically lasting 60s or less. Red shifts are observed in Si IV, C II, and Mg II during the impulsive phase. Mg II shows red-shifts during the bursts and stationary emission at other times. The Si IV and C II profiles, in contrast, are observed to be red-shifted at all times during the impulsive phase. These persistent red-shifts are a challenge for one-dimensional hydrodynamic models, which predict only short-duration downflows in response to impulsive heating. We conjecture that energy is being released on many small-scale filaments with a power-law distribution of heating rates.

Fast (>700 km/s) and slow (~400 km/s) winds stream from the Sun, permeate the heliosphere and influence the near-Earth environment. While the fast wind is known to emanate primarily from polar coronal holes, the source of the slow wind remains unknown. Here we identify possible sites of origin using a slow solar wind source map of the entire Sun, which we construct from specially designed, full- disk observations from the Hinode satellite, and a magnetic field model. Our map provides a full-Sun observation that combines three key ingredients for identifying the sources: velocity, plasma composition and magnetic topology and shows them as solar wind composition plasma outflowing on open magnetic field lines. The area coverage of the identified sources is large enough that the sum of their mass contributions can explain a significant fraction of the mass loss rate of the solar wind.

Spectral line widths are often observed to be larger than can be accounted for by thermal and instrumental broadening alone. This excess broadening is a key observational constraint for both nanoflare and wave dissipation models of coronal heating. Here we present a survey of non-thermal velocities measured in the high temperature loops (1--5MK) often found in the cores of solar active regions. This survey of $\textit{Hinode}$ Extreme Ultraviolet Imaging Spectrometer (EIS) observations covers 15 non-flaring active regions that span a wide range of solar conditions. We find relatively small non-thermal velocities, with a mean value of 17km s$^{-1}$, and no significant trend with temperature or active region magnetic flux. These measurements appear to be inconsistent with those expected from reconnection jets in the corona, chromospheric evaporation induced by coronal nanoflares, and Alfv\'en wave turbulence models. Furthermore, because the observed non-thermal widths are generally small their measurements are difficult and susceptible to systematic effects.

It is well established that elemental abundances vary in the solar atmosphere and that this variation is organized by first ionization potential (FIP). Previous studies have shown that in the solar corona low-FIP elements, such as Fe, Si, Mg, and Ca, are generally enriched relative to high-FIP elements, such as C, N, O, Ar, and Ne. In this paper we report on measurements of plasma composition made during impulsive heating events observed at transition region temperatures with the Extreme Ultraviolet Imaging Spectrometer (EIS) on Hinode. During these events the intensities of O IV, V, and VI emission lines are enhanced relative to emission lines from Mg V, VI, and VII and Si VI and VII and indicate a composition close to that of the photosphere. Long-lived coronal fan structures, in contrast, show an enrichment of low-FIP elements. We conjecture that the plasma composition is an important signature of the coronal heating process, with impulsive heating leading to the evaporation of unfractionated material from the lower layers of the solar atmosphere and higher frequency heating leading to long-lived structures and the accumulation of low-FIP elements in the corona.

The evolution of a coronal loop is studied by means of numerical simulations of the fully compressible three-dimensional magnetohydrodynamic equations using the HYPERION code. The footpoints of the loop magnetic field are advected by random motions. As a consequence the magnetic field in the loop is energized and develops turbulent nonlinear dynamics characterized by the continuous formation and dissipation of field-aligned current sheets: energy is deposited at small scales where heating occurs. Dissipation is non-uniformly distributed so that only a fraction of the coronal mass and volume gets heated at any time. Temperature and density are highly structured at scales which, in the solar corona, remain observationally unresolved: the plasma of our simulated loop is multi-thermal, where highly dynamical hotter and cooler plasma strands are scattered throughout the loop at sub-observational scales. Numerical simulations of coronal loops of 50000 km length and axial magnetic field intensities ranging from 0.01 to 0.04 Tesla are presented. To connect these simulations to observations we use the computed number densities and temperatures to synthesize the intensities expected in emission lines typically observed with the Extreme ultraviolet Imaging Spectrometer (EIS) on Hinode. These intensities are used to compute differential emission measure distributions using the Monte Carlo Markov Chain code, which are very similar to those derived from observations of solar active regions. We conclude that coronal heating is found to be strongly intermittent in space and time, with only small portions of the coronal loop being heated: in fact, at any given time, most of the corona is cooling down.

With multiple vantage points around the Sun, STEREO and SDO imaging observations provide a unique opportunity to view the solar surface continuously. We use He II 304 A data from these observatories to isolate and track ten active regions and study their long-term evolution. We find that active regions typically follow a standard pattern of emergence over several days followed by a slower decay that is proportional in time to the peak intensity in the region. Since STEREO does not make direct observations of the magnetic field, we employ a flux-luminosity relationship to infer the total unsigned magnetic flux evolution. To investigate this magnetic flux decay over several rotations we use a surface flux transport model, the Advective Flux Transport (AFT) model, that simulates convective flows using a time-varying velocity field and find that the model provides realistic predictions when information about the active region's magnetic field strength and distribution at peak flux is available. Finally, we illustrate how 304 \AA\ images can be used as a proxy for magnetic flux measurements when magnetic field data is not accessible.

The Extreme-ultraviolet Imaging Spectrometer (EIS) on the Hinode spacecraft observed flare footpoint regions coincident with a surge for a M3.7 flare observed on 25 September 2011 at N12 E33 in active region 11302. The flare was observed in spectral lines of O VI, Fe X, Fe XII, Fe XIV, Fe XV, Fe XVI, Fe XVII, Fe XXIII and Fe XXIV. The EIS observations were made coincident with hard X-ray bursts observed by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). Overlays of the RHESSI images on the EIS raster images at different wavelengths show a spatial coincidence of features in the RHESSI images with the EIS upflow and downflow regions, as well as loop-top or near-loop-top regions. A complex array of phenomena was observed including multiple evaporation regions and the surge, which was also observed by the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) telescopes. The slit of the EIS spectrometer covered several flare footpoint regions from which evaporative upflows in Fe XXIII and Fe XXIV lines were observed with Doppler speeds greater than 500 km s$^{-1}$. For ions such as Fe XV both evaporative outflows (~200 km s$^{-1}$) and downflows (~30-50 km s$^{-1}$) were observed. Non-thermal motions from 120 to 300 km s$^{-1}$ were measured in flare lines. In the surge, Doppler speeds are found from about 0 to over 250 km s$^{-1}$ in lines from ions such as Fe XIV. The non-thermal motions could be due to multiple sources slightly Doppler-shifted from each other or turbulence in the evaporating plasma. We estimate the energetics of the hard X-ray burst and obtain a total flare energy in accelerated electrons of $\geq7\times10^{28}$ ergs. This is a lower limit because only an upper limit can be determined for the low energy cutoff to the electron spectrum. We find that detailed modeling of this event would require a multi-threaded model due to its complexity.

We compare the ability of 11 Differential Emission Measure (DEM) forward-fitting and inversion methods to constrain the properties of active regions and solar flares by simulating synthetic data using the instrumental response functions of SDO/AIA, SDO/EVE, RHESSI, and GOES/XRS. The codes include the single-Gaussian DEM, a bi-Gaussian DEM, a fixed-Gaussian DEM, a linear spline DEM, the spatial synthesis DEM, the Monte-Carlo Markov chain DEM, the regularized DEM inversion, the Hinode/XRT method, a polynomial spline DEM, an EVE+GOES, and an EVE+RHESSI method. Averaging the results from all 11 DEM methods, we find the following accuracies in the inversion of physical parameters: the EM-weighted temperature $T_w^{fit}/T_w^{sim}=0.9\pm0.1$, the peak emission measure $EM_p^{fit}/EM_p^{sim}=0.6\pm0.2$, the total emission measure $EM_t^{fit}/EM_t^{sim}=0.8\pm0.3$, and the multi-thermal energies $E_{th}^{fit}/EM_{th}^{sim}=1.2\pm0.4$. We find that the AIA spatial synthesis, the EVE+GOES, and the EVE+RHESSI method yield the most accurate results.

The solar corona is orders of magnitude hotter than the underlying photosphere, but how the corona attains such high temperatures is still not understood. Soft X-ray (SXR) emission provides important diagnostics for thermal processes in the high-temperature corona, and is also an important driver of ionospheric dynamics at Earth. There is a crucial observational gap between ~0.2 and ~4 keV, outside the ranges of existing spectrometers. We present observations from a new SXR spectrometer, the Amptek X123-SDD, which measured the spatially-integrated solar spectral irradiance from ~0.5 to ~5 keV, with ~0.15 keV FWHM resolution, during sounding rocket flights on 2012 June 23 and 2013 October 21. These measurements show that the highly variable SXR emission is orders of magnitude greater than that during the deep minimum of 2009, even with only weak activity. The observed spectra show significant high-temperature (5-10 MK) emission and are well fit by simple power-law temperature distributions with indices of ~6, close to the predictions of nanoflare models of coronal heating. Observations during the more active 2013 flight indicate an enrichment of low first-ionization potential (FIP) elements of only ~1.6, below the usually-observed value of ~4, suggesting that abundance variations may be related to coronal heating processes. The XUV Photometer System Level 4 data product, a spectral irradiance model derived from integrated broadband measurements, significantly overestimates the spectra from both flights, suggesting a need for revision of its non-flare reference spectra, with important implications for studies of Earth ionospheric dynamics driven by solar SXRs.

We present the second part of a project on the global energetics of solar flares and CMEs that includes about 400 M- and X-class flares observed with AIA/SDO during the first 3.5 years of its mission. In this Paper II we compute the differential emission measure (DEM) distribution functions and associated multi-thermal energies, using a spatially-synthesized Gaussian DEM forward-fitting method. The multi-thermal DEM function yields a significantly higher (by an average factor of $\approx 14$), but more comprehensive (multi-)thermal energy than an isothermal energy estimate from the same AIA data. We find a statistical energy ratio of $E_{th}/E_{diss} \approx 2\%-40\%$ between the multi-thermal energy $E_{th}$ and the magnetically dissipated energy $E_{diss}$, which is an order of magnitude higher than the estimates of Emslie et al.~2012. For the analyzed set of M and X-class flares we find the following physical parameter ranges: $L=10^{8.2}-10^{9.7}$ cm for the length scale of the flare areas, $T_p=10^{5.7}-10^{7.4}$ K for the DEM peak temperature, $T_w=10^{6.8}-10^{7.6}$ K for the emission measure-weighted temperature, $n_p=10^{10.3}-10^{11.8}$ cm$^{-3}$ for the average electron density, $EM_p=10^{47.3}-10^{50.3}$ cm$^{-3}$ for the DEM peak emission measure, and $E_{th}=10^{26.8}-10^{32.0}$ erg for the multi-thermal energies. The deduced multi-thermal energies are consistent with the RTV scaling law $E_{th,RTV} = 7.3 \times 10^{-10} \ T_p^3 L_p^2$, which predicts extremal values of $E_{th,max} \approx 1.5 \times 10^{33}$ erg for the largest flare and $E_{th,min} \approx 1 \times 10^{24}$ erg for the smallest coronal nanoflare. The size distributions of the spatial parameters exhibit powerlaw tails that are consistent with the predictions of the fractal-diffusive self-organized criticality model combined with the RTV scaling law.

Deriving a well-constrained differential emission measure (DEM) distribution for solar flares has historically been difficult, primarily because no single instrument is sensitive to the full range of coronal temperatures observed in flares, from $\lesssim$2 to $\gtrsim$50 MK. We present a new technique, combining extreme ultraviolet (EUV) spectra from the EUV Variability Experiment (EVE) onboard the Solar Dynamics Observatory with X-ray spectra from the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI), to derive, for the first time, a self-consistent, well-constrained DEM for jointly-observed solar flares. EVE is sensitive to ~2-25 MK thermal plasma emission, and RHESSI to $\gtrsim$10 MK; together, the two instruments cover the full range of flare coronal plasma temperatures. We have validated the new technique on artificial test data, and apply it to two X-class flares from solar cycle 24 to determine the flare DEM and its temporal evolution; the constraints on the thermal emission derived from the EVE data also constrain the low-energy cutoff of the non-thermal electrons, a crucial parameter for flare energetics. The DEM analysis can also be used to predict the soft X-ray flux in the poorly-observed ~0.4-5 nm range, with important applications for geospace science.

We present a study of the frequency of transient brightenings in the core of solar active regions as observed in the Fe XVIII line component of AIA/SDO 94 A filter images. The Fe XVIII emission is isolated using an empirical correction to remove the contribution of "warm" emission to this channel. Comparing with simultaneous observations from EIS/Hinode, we find that the variability observed in Fe XVIII is strongly correlated with the emission from lines formed at similar temperatures. We examine the evolution of loops in the cores of active regions at various stages of evolution. Using a newly developed event detection algorithm we characterize the distribution of event frequency, duration, and magnitude in these active regions. These distributions are similar for regions of similar age and show a consistent pattern as the regions age. This suggests that these characteristics are important constraints for models of solar active regions. We find that the typical frequency of the intensity fluctuations is about 1400s for any given line-of-sight, i.e. about 2-3 events per hour. Using the EBTEL 0D hydrodynamic model, however, we show that this only sets a lower limit on the heating frequency along that line-of-sight.

We investigate the absolute calibration of the EUV Imaging Spectrometer (EIS) on Hinode by comparing EIS full-disk mosaics with irradiance observations from the EUV Variability Experiment (EVE) on the Solar Dynamics Observatory. We also use ultra-deep (>10^5s) exposures of the quiet corona above the limb combined with a simple differential emission measure model to establish new effective area curves that incorporate information from the most recent atomic physics calculations. We find that changes to the EIS instrument sensitivity are a complex function of both time and wavelength. We find that the sensitivity is decaying exponentially with time and that the decay constants vary with wavelength. The EIS short wavelength channel shows significantly longer decay times than the long wavelength channel.

We present measurements of elemental abundances in solar flares with the EUV Variability Experiment (EVE) on the Solar Dynamics Observatory (SDO). EVE observes both high temperature Fe emission lines (Fe XV-Fe XXIV) and continuum emission from thermal bremsstrahlung that is proportional to the abundance of H. By comparing the relative intensities of line and continuum emission it is possible to determine the enrichment of the flare plasma relative to the composition of the photosphere. This is the first ionization potential or FIP bias ($f$). Since thermal bremsstrahlung at EUV wavelengths is relatively insensitive to the electron temperature, it is important to account for the distribution of electron temperatures in the emitting plasma. We accomplish this by using the observed spectra to infer the differential emission measure distribution and FIP bias simultaneously. In each of the 21 flares that we analyze we find that the observed composition is close to photospheric. The mean FIP bias in our sample is $f=1.27\pm0.23$. This analysis suggests that the bulk of the plasma evaporated during a flare comes from deep in the chromosphere, below the region where elemental fractionation occurs.

We present an assessment of the accuracy of the calibration measurements and atomic physics models that go into calculating the SDO/AIA response as a function of wavelength and temperature. The wavelength response is tested by convolving SDO/EVE and {\it Hinode}/EIS spectral data with the AIA effective area functions and comparing the predictions with AIA observations. For most channels, the AIA intensities summed over the disk agree with the corresponding measurements derived from the current Version (V2) of the EVE data to within the estimated 25% calibration error. This agreement indicates that the AIA effective areas are generally stable in time. The AIA 304 \AA\ channel, however, does show degradation by a factor of almost 3 from May 2010 through September 2011, when the throughput apparently reached a minimum. We also find some inconsistencies in the 335 \AA\ passband, possibly due to higher-order contamination of the EVE data. The intensities in the AIA 193 \AA\ channel agree to within the uncertainties with the corresponding measurements from EIS full CCD observations. Analysis of high-resolution X-ray spectra of the solar-like corona of Procyon, and of EVE spectra, allows us to investigate the accuracy and completeness of the CHIANTI database in the AIA shorter wavelength passbands. We find that in the 94 \AA\ channel, the spectral model significantly underestimates the plasma emission owing to a multitude of missing lines. We derive an empirical correction for the AIA temperature responses by performing differential emission measure (DEM) inversion on a broad set of EVE spectra and adjusting the AIA response functions so that the count rates predicted by the full-disk DEMs match the observations.

Understanding how the solar corona is structured is of fundamental importance to determining how the Sun's upper atmosphere is heated to high temperatures. Recent spectroscopic studies have suggested that an instrument with a spatial resolution of 200km or better is necessary to resolve coronal loops. The High Resolution Coronal Imager (Hi-C) achieved this performance on a rocket flight in July 2012. We use Hi-C data to measure the Gaussian widths of 91 loops observed in the solar corona and find a distribution that peaks at about 270km. We also use Atmospheric Imaging Assembly (AIA) data for a subset of these loops and find temperature distributions that are generally very narrow. These observations provide further evidence that loops in the solar corona are often structured at a scale of several hundred kilometers, well above the spatial scale of many proposed physical mechanisms.

Coronal cells are visible at temperatures of ~ 1.2 MK in Fe XII coronal images obtained from the Solar Dynamics Observatory (SDO) and Solar Terrestrial Relations Observatory (STEREO) spacecraft. We show that near a filament channel, the plumelike tails of these cells bend horizontally in opposite directions on the two sides of the channel like fibrils in the chromosphere. Because the cells are rooted in magnetic flux concentrations of majority polarity, these observations can be used with photospheric magnetograms to infer the direction of the horizontal field in filament channels and the chirality of the associated magnetic field. This method is similar to the procedure for inferring the direction of the magnetic field and the chirality of the fibril pattern in filament channels from H-alpha observations. However, the coronal cell observations are easier to use and provide clear inferences of the horizontal field direction for heights up to ~ 50 Mm into the corona.

Flare kernels are compact features located in the solar chromosphere that are the sites of rapid heating and plasma upflow during the rise phase of flares. An example is presented from a M1.1 class flare observed on 2011 February 16 07:44 UT for which the location of the upflow region seen by EIS can be precisely aligned to high spatial resolution images obtained by the Atmospheric Imaging Assembly (AIA) and Heliospheric Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO). A string of bright flare kernels is found to be aligned with a ridge of strong magnetic field, and one kernel site is highlighted for which an upflow speed of 400 km/s is measured in lines formed at 10-30 MK. The line-of-sight magnetic field strength at this location is 1000 G. Emission over a continuous range of temperatures down to the chromosphere is found, and the kernels have a similar morphology at all temperatures and are spatially coincident with sizes at the resolution limit of the AIA instrument (< 400 km). For temperatures of 0.3-3.0 MK the EIS emission lines show multiple velocity components, with the dominant component becoming more blue-shifted with temperature from a redshift of 35 km/s at 0.3 MK to a blueshift of 60 km/s at 3.0 MK. Emission lines from 1.5-3.0 MK show a weak redshifted component at around 60-70 km/s implying multi-directional flows at the kernel site. Significant non-thermal broadening corresponding to velocities of 120 km/s is found at 10-30MK, and the electron density in the kernel, measured at 2 MK, is 3.4 x 10^10 cm-3. Finally, the Fe XXIV 192.03/255.11 ratio suggests that the EIS calibration has changed since launch, with the long wavelength channel less sensitive than the short wavelength channel by around a factor two.

We discuss observations of chromospheric evaporation for a complex flare that occurred on 9 March 2012 near 03:30 UT obtained from the Extreme-ultraviolet Imaging Spectrometer (EIS) on the Hinode spacecraft. This was a multiple event with a strong energy input that reached the M1.8 class when observed by EIS. EIS obtained a full-CCD spectrum of the flare. Chromospheric evaporation characterized by 150-200 km/s upflows was observed in multiple locations in multi-million degree spectral lines of flare ions such as Fe XXII, Fe XXIII, and Fe XXIV, with simultaneous 20-60 km/s upflows in million degree coronal lines from ions such as Fe XII - Fe XVI. The behavior of cooler, transition region ions such as O VI, Fe VIII, He II, and Fe X is more complex, but upflows were also observed in Fe VIII and Fe X lines. At a point close to strong energy input in space and time, the flare ions Fe XXII, Fe XXIII, and Fe XXIV reveal an isothermal source with a temperature close to 14 MK and no strong blueshifted components. At this location there is a strong downflow in cooler active region lines from ions such as Fe XIII and Fe XIV. We speculate that this downflow may be evidence of the downward shock produced by reconnection in the current sheet seen in MHD simulations. A sunquake also occurred near this location.

One of the defining characteristics of a solar flare is the impulsive formation of very high temperature plasma. The properties of the thermal emission are not well understood, however, and the analysis of solar flare observations is often predicated on the assumption that the flare plasma is isothermal. The EUV Variability Experiment (EVE) on the Solar Dynamics Observatory (SDO) provides spectrally resolved observations of emission lines that span a wide range of temperatures (e.g., Fe XV-Fe XXIV) and allow for thermal flare plasma to be studied in detail. In this paper we describe a method for computing the differential emission measure distribution in a flare using EVE observations and apply it to several representative events. We find that in all phases of the flare the differential emission measure distribution is broad. Comparisons of EVE spectra with calculations based on parameters derived from the GOES soft X-ray fluxes indicate that the isothermal approximation is generally a poor representation of the thermal structure of a flare.

High resolution spectra from the Hinode EUV Imaging Spectrometer (EIS) have revealed that coronal spectral line profiles are sometimes asymmetric, with a faint enhancement in the blue wing on the order of 100 km/s. These asymmetries could be important since they may be subtle, yet diagnostically useful signatures of coronal heating or solar wind acceleration processes. It has also been suggested that they are signatures of chromospheric jets supplying mass and energy to the corona. Until now, however, there have been no studies of the physical properties of the plasma producing the asymmetries. Here we identify regions of asymmetric profiles in the outflows of AR 10978 using an asymmetric Gaussian function and extract the intensities of the faint component using multiple Gaussian fits. We then derive the temperature structure and chemical composition of the plasma producing the asymmetries. We find that the asymmetries are dependent on temperature, and are clearer and stronger in coronal lines. The temperature distribution peaks around 1.4-1.8 MK with an emission measure at least an order of magnitude larger than that at 0.6 MK. The first ionization potential bias is found to be 3-5, implying that the high speed component of the outflows may also contribute to the slow speed wind. Observations and models indicate that it takes time for plasma to evolve to a coronal composition, suggesting that the material is trapped on closed loops before escaping, perhaps by interchange reconnection. The results, therefore, identify the plasma producing the asymmetries as having a coronal origin.

The large uncertainties associated with measuring the amount of high temperature emission in solar active regions represents a significant impediment to making progress on the coronal heating problem. Most current observations at temperatures of 3 MK and above are taken with broad band soft X-ray instruments. Such measurements have proven difficult to interpret unambiguously. Here we present the first spectroscopic observations of the Fe XVIII 974.86 AA emission line in an on-disk active region taken with then SUMER instrument on SOHO. Fe XVIII has a peak formation temperature of 7.1 MK and provides important constraints on the amount of impulsive heating in the corona. Detailed evaluation of the spectra and comparison of the SUMER data with soft X-ray images from the XRT on Hinode confirm that this line is unblended. We also compare the spectroscopic data with observations from the AIA 94 AA channel on SDO. The AIA 94 AA channel also contains Fe XVIII, but is blended with emission formed at lower temperatures. We find that is possible to remove the contaminating blends and form relatively pure Fe XVIII images that are consistent with the spectroscopic observations from SUMER. The observed spectra also contain the Ca XIV 943.63 AA line that, although a factor 2 to 6 weaker than the Fe XVIII 974.86 AA line, allows us to probe the plasma around 3.5 MK. The observed ratio between the two lines indicates (isothermal approximation) that most of the plasma in the brighter Fe XVIII active region loops is at temperatures between 3.5 and 4 MK.

Despite decades of studying the Sun, the coronal heating problem remains unsolved. One fundamental issue is that we do not know the spatial scale of the coronal heating mechanism. At a spatial resolution of 1000 km or more it is likely that most observations represent superpositions of multiple unresolved structures. In this letter, we use a combination of spectroscopic data from the Hinode EUV Imaging Spectrometer (EIS) and high resolution images from the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory to determine the spatial scales of coronal loops. We use density measurements to construct multi-thread models of the observed loops and confirm these models using the higher spatial resolution imaging data. The results allow us to set constraints on the number of threads needed to reproduce a particular loop structure. We demonstrate that in several cases million degree loops are revealed to be single monolithic structures that are fully spatially resolved by current instruments. The majority of loops, however, must be composed of a number of finer, unresolved threads; but the models suggest that even for these loops the number of threads could be small, implying that they are also close to being resolved. These results challenge heating models of loops based on the reconnection of braided magnetic fields in the corona.

The recent analysis of observations taken with the EIS instrument on Hinode suggests that well constrained measurements of the temperature distribution in solar active regions can finally be made. Such measurements are critical for constraining theories of coronal heating. Past analysis, however, has suffered from limited sample sizes and large uncertainties at temperatures between 5 and 10 MK. Here we present a systematic study of the differential emission cores. We focus on measurements in the "inter-moss" region, that is, the region between the loop footpoints, where the observations are easier to interpret. To reduce the uncertainties at the highest temperatures we present a new method for isolating the Fe XVIII emission in the AIA/SDO 94 channel. The resulting differential emission measure distributions confirm our previous analysis showing that the temperature distribution in an active region core is often strongly peaked near 4 MK. We characterize the properties of the emission distribution as a function of the total unsigned magnetic flux. We find that the amount of high temperature emission in the active region core is correlated with the total unsigned magnetic flux, while the emission at lower temperatures, in contrast, is inversely related. These results provide compelling evidence that high temperature active region emission is often close to equilibrium, although weaker active regions may be dominated by evolving million degree loops in the core.

All theories that attempt to explain the heating of the high temperature plasma observed in the solar corona are based on short bursts of energy. The intensities and velocities measured in the cores of quiescent active regions, however, can be steady over many hours of observation. One heating scenario that has been proposed to reconcile such observations with impulsive heating models is the "long nanoflare storm," where short duration heating events occur infrequently on many sub-resolutions strands; the emission of the strands is then averaged together to explain the observed steady structures. In this Letter, we examine the emission measure distribution predicted for such a long nanoflare storm by modeling an arcade of strands in an active region core. Comparisons of the computed emission measure distributions with recent observations indicate that that the long nanoflare storm scenario implies greater than 5 times more 1 MK emission than is actually observed for all plausible combinations of loop lengths, heating rates, and abundances. We conjecture that if the plasma had "super coronal" abundances, the model may be able to match the observations at low temperatures.

We present plasma diagnostics of an EIT wave observed with high cadence in Hinode/EIS sit-and-stare spectroscopy and SDO/AIA imagery obtained during the HOP-180 observing campaign on 2011 February 16. At the propagating EIT wave front, we observe downward plasma flows in the EIS Fe XII, Fe XIII, and Fe XVI spectral lines (log T ~ 6.1-6.4) with line-of-sight (LOS) velocities up to 20 km/s. These red-shifts are followed by blue-shifts with upward velocities up to -5 km/s indicating relaxation of the plasma behind the wave front. During the wave evolution, the downward velocity pulse steepens from a few km/s up to 20 km/s and subsequently decays, correlated with the relative changes of the line intensities. The expected increase of the plasma densities at the EIT wave front estimated from the observed intensity increase lies within the noise level of our density diagnostics from EIS XIII 202/203 AA line ratios. No significant LOS plasma motions are observed in the He II line, suggesting that the wave pulse was not strong enough to perturb the underlying chromosphere. This is consistent with the finding that no Halpha Moreton wave was associated with the event. The EIT wave propagating along the EIS slit reveals a strong deceleration of a ~ -540 m/s2 and a start velocity of v0 ~ 590 km/s. These findings are consistent with the passage of a coronal fast-mode MHD wave, pushing the plasma downward and compressing it at the coronal base.

Understanding the solar outer atmosphere requires concerted, simultaneous solar observations from the visible to the vacuum ultraviolet (VUV) and soft X-rays, at high spatial resolution (between 0.1" and 0.3"), at high temporal resolution (on the order of 10 s, i.e., the time scale of chromospheric dynamics), with a wide temperature coverage (0.01 MK to 20 MK, from the chromosphere to the flaring corona), and the capability of measuring magnetic fields through spectropolarimetry at visible and near-infrared wavelengths. Simultaneous spectroscopic measurements sampling the entire temperature range are particularly important. These requirements are fulfilled by the Japanese Solar-C mission (Plan B), composed of a spacecraft in a geosynchronous orbit with a payload providing a significant improvement of imaging and spectropolarimetric capabilities in the UV, visible, and near-infrared with respect to what is available today and foreseen in the near future. The Large European Module for solar Ultraviolet Research (LEMUR), described in this paper, is a large VUV telescope feeding a scientific payload of high-resolution imaging spectrographs and cameras. LEMUR consists of two major components: a VUV solar telescope with a 30 cm diameter mirror and a focal length of 3.6 m, and a focal-plane package composed of VUV spectrometers covering six carefully chosen wavelength ranges between 17 and 127 nm. The LEMUR slit covers 280" on the Sun with 0.14" per pixel sampling. In addition, LEMUR is capable of measuring mass flows velocities (line shifts) down to 2 km/s or better. LEMUR has been proposed to ESA as the European contribution to the Solar C mission.

Perhaps the most compelling evidence for the role of magnetic reconnection in solar flares comes from the supra-arcade downflows that have been observed above many post-flare loop arcades. These downflows are thought to be related to highly non-potential field lines that have reconnected and are propagating away from the current sheet. We present new observations of supra-arcade downflows taken with the Atmospheric Imagining Assembly (AIA) on the \textit{Solar Dynamics Observatory} (\textit{SDO}). The morphology and dynamics of the downflows observed with AIA provide new evidence for the role of magnetic reconnection in solar flares. With these new observations we are able to measure downflows originating at much larger heights than in previous studies. We find, however, that the initial velocities measured here ($\sim$144\,km s$^{-1}$) are well below the Alfv{\'e}n speed expected in the lower corona, and consistent with previous results. We also find no evidence that the downflows brighten with time, as would be expected from chromospheric evaporation. These observations suggest that simple two-dimensional models cannot explain the detailed observations of solar flares.

The frequency of heating events in the corona is an important constraint on the coronal heating mechanisms. Observations indicate that the intensities and velocities measured in active region cores are effectively steady, suggesting that heating events occur rapidly enough to keep high temperature active region loops close to equilibrium. In this paper, we couple observations of Active Region 10955 made with XRT and EIS on \textit{Hinode} to test a simple steady heating model. First we calculate the differential emission measure of the apex region of the loops in the active region core. We find the DEM to be broad and peaked around 3\,MK. We then determine the densities in the corresponding footpoint regions. Using potential field extrapolations to approximate the loop lengths and the density-sensitive line ratios to infer the magnitude of the heating, we build a steady heating model for the active region core and find that we can match the general properties of the observed DEM for the temperature range of 6.3 $<$ Log T $<$ 6.7. This model, for the first time, accounts for the base pressure, loop length, and distribution of apex temperatures of the core loops. We find that the density-sensitive spectral line intensities and the bulk of the hot emission in the active region core are consistent with steady heating. We also find, however, that the steady heating model cannot address the emission observed at lower temperatures. This emission may be due to foreground or background structures, or may indicate that the heating in the core is more complicated. Different heating scenarios must be tested to determine if they have the same level of agreement.

We present observations of high temperature emission in the core of a solar active region using instruments on Hinode and SDO. These multi-instrument observations allow us to determine the distribution of plasma temperatures and follow the evolution of emission at different temperatures. We find that at the apex of the high temperature loops the emission measure distribution is strongly peaked near 4 MK and falls off sharply at both higher and lower temperatures. Perhaps most significantly, the emission measure at 0.5 MK is reduced by more than two orders of magnitude from the peak at 4 MK. We also find that the temporal evolution in broad-band soft X-ray images is relatively constant over about 6 hours of observing. Observations in the cooler SDO/AIA bandpasses generally do not show cooling loops in the core of the active region, consistent with the steady emission observed at high temperatures. These observations suggest that the high temperature loops observed in the core of an active region are close to equilibrium. We find that it is possible to reproduce the relative intensities of high temperature emission lines with a simple, high-frequency heating scenario where heating events occur on time scales much less than a cooling time. In contrast, low-frequency heating scenarios, which are commonly invoked to describe nanoflare models of coronal heating, do not reproduce the relative intensities of high temperature emission lines and predict low-temperature emission that is approximately an order of magnitude too large. We also present an initial look at images from the SDO/AIA 94 A channel, which is sensitive to Fe XVIII.

With the aim of studying AR fan loops using Hinode/EIS and SDO/AIA, we investigate a number of inconsistencies in modeling the absolute intensities of Fe VIII and Si VII lines, and address why their images look very similar despite the fact that they have significantly different formation temperatures in ionization equilibrium: log T/K = 5.6 and 5.8. These issues are important to resolve because confidence has been undermined in their use for DEM analysis, and Fe VIII is the main contributor to the AIA 131A channel at low temperatures. Furthermore, they are the best EIS lines to use for velocity studies, and for assigning the correct temperature to velocity measurements in the fans. We find that the Fe VIII 185.213A line is particularly sensitive to the slope of the DEM, leading to disproportionate changes in its effective formation temperature. If the DEM has a steep gradient in the log T/K = 5.6 to 5.8 range, or is strongly peaked, Fe VIII 185.213A and Si VII 275.368A will be formed at the same temperature. We show that this effect explains the similarity of these images in the fans. Furthermore, we show that the most recent ionization balance compilations resolve the discrepancies in absolute intensities. We then combine EIS and AIA to determine the temperature structure of a number of fan loops and find that they have peak temperatures of 0.8--1.2MK. The EIS data indicate that the temperature distribution has a finite (but narrow) width < log sigma/K = 5.5 which, in one case, is found to broaden substantially towards the loop base. AIA and EIS yield similar results on the temperature, emission measure, and thermal distribution in the fans, though sometimes the AIA data suggest a relatively larger thermal width. The result is that both the Fe VIII 185.213A and Si VII 275.368A lines are formed at log T/K ~ 5.9 in the fans, and the AIA 131A response also shifts to this temperature.

One of the most interesting discoveries of the X-ray Telescope and EUV Imaging Spectrometer (EIS) on board the Hinode solar observatory is the presence of persistent high temperature high speed outflows from the edges of active regions. Measurements by EIS indicate that the outflows reach velocities of 50 km/s with spectral line asymmetries approaching 200 km/s. It has been suggested that these outflows may lie on open field lines that connect to the heliosphere, and that they could potentially be a significant source of the slow speed solar wind. A direct link has been difficult to establish, however. In this letter, we use EIS measurements of spectral line intensities that are sensitive to changes in the relative abundance of Si and S as a result of the first ionization potential (FIP) effect, to measure the chemical composition in the outflow regions of AR 10978 over a period of 5 days in December 2007. We find that Si is always enhanced over S by a factor of 3--4. This is generally consistent with the enhancement factor of low FIP elements measured in-situ in the slow solar wind by non-spectroscopic methods. Plasma with a slow wind-like composition was therefore flowing from the edge of the active region for at least 5 days. Furthermore, on December 10--11, when the outflow from the western side was favorably oriented in the Earth direction, the Si/S ratio was found to match the value measured a few days later by ACE/SWICS. These results provide strong observational evidence for a direct connection between the solar wind, and the coronal plasma in the outflow regions.

We present the science case for a broadband X-ray imager with high-resolution spectroscopy, including simulations of X-ray spectral diagnostics of both active regions and solar flares. This is part of a trilogy of white papers discussing science, instrument (Bandler et al. 2010), and missions (Bookbinder et al. 2010) to exploit major advances recently made in transition-edge sensor (TES) detector technology that enable resolution better than 2 eV in an array that can handle high count rates. Combined with a modest X-ray mirror, this instrument would combine arcsecondscale imaging with high-resolution spectra over a field of view sufficiently large for the study of active regions and flares, enabling a wide range of studies such as the detection of microheating in active regions, ion-resolved velocity flows, and the presence of non-thermal electrons in hot plasmas. It would also enable more direct comparisons between solar and stellar soft X-ray spectra, a waveband in which (unusually) we currently have much better stellar data than we do of the Sun.

Recent observations from the Extreme-ultraviolet Imaging Spectrometer (EIS) on board Hinode have shown that low density areas on the periphery of active regions are characterized by strong blue-shifts at 1 MK. These Doppler shifts have been associated with outward propagating disturbances observed with Extreme-ultraviolet and soft X-ray imagers. Since these instruments can have broad temperature responses we investigate these intensity fluctuations using the monochromatic imaging capabilities of EIS and confirm their 1 MK nature. We also find that the Fe XII 195.119 A blue shifted spectral profiles at their footpoints exhibit transient blue wing enhancements on timescales as short as the 5 minute cadence. We have also looked at the fan peripheral loops observed at 0.6 MK in Si VII 275.368 A in those regions and find no sign of the recurrent outward propagating disturbances with velocities of 40 - 130 km/s seen in Fe XII. We do observe downward trends (15 - 20 km/s) consistent with the characteristic red-shifts measured at their footpoints. We, therefore, find no evidence that the structures at these two temperatures and the intensity fluctuations they exhibit are related to one another.

Spectroscopic observations with the EUV Imaging Spectrometer (EIS) on Hinode have revealed large areas of high speed outflows at the periphery of many solar active regions. These outflows are of interest because they may connect to the heliosphere and contribute to the solar wind. In this Letter we use slit rasters from EIS in combination with narrow band slot imaging to study the temperature dependence of an active region outflow and show that it is more complicated than previously thought. Outflows are observed primarily in emission lines from Fe XI - Fe XV. Observations at lower temperatures (Si VII), in contrast, show bright fan-like structures that are dominated by downflows. The morphology of the outflows is also different than that of the fans. This suggests that the fan loops, which often show apparent outflows in imaging data, are contained on closed field lines and are not directly related to the active region outflows.

We describe the characteristics and evolution of the magnetic field and chromospheric emission in an active region core observed by the Solar Optical Telescope on Hinode. Consistent with previous studies, we find that the moss is unipolar, the spatial distribution of magnetic flux evolves slowly, and the magnetic field is only moderately inclined. We show that the field line inclination and horizontal component are coherent, and that the magnetic field is mostly sheared in the inter-moss regions where the highest magnetic flux variability is seen. Using extrapolations from SP magnetograms we show that the magnetic connectivity in the moss is different than in the quiet Sun because most of the magnetic field extends to significant coronal heights. The magnetic flux, field vector, and chromospheric emission in the moss also appear highly dynamic, but actually show only small scale variations in magnitude on time-scales longer than the cooling times for hydrodynamic loops computed from our extrapolations, suggesting high-frequency (continuous) heating events. Some evidence is found for flux (Ca 2 intensity) changes on the order of 100--200 G (DN) on time-scales of 20--30 mins that could be taken as indicative of low-frequency heating. We find, however, that only a small fraction (10%) of our simulated loops would be expected to cool on these time-scales, and we find no clear evidence that the flux changes consistently produce intensity changes in the chromosphere. The magnetic flux and chromospheric intensity in most individual SOT pixels in the moss vary by less than ~ 20% and ~ 10%, respectively, on loop cooling time-scales. In view of the high energy requirements of the chromosphere, we suggest that these variations could be sufficient for the heating of `warm' EUV loops, but that the high basal levels may be more important for powering the hot core loops rooted in the moss.

Previous observations have not been able to exclude the possibility that high temperature active region loops are actually composed of many small scale threads that are in various stages of heating and cooling and only appear to be in equilibrium. With new observations from the EUV Imaging Spectrometer (EIS) and X-ray Telescope (XRT) on \textit{Hinode} we have the ability to investigate the properties of high temperature coronal plasma in extraordinary detail. We examine the emission in the core of an active region and find three independent lines of evidence for steady heating. We find that the emission observed in XRT is generally steady for hours, with a fluctuation level of approximately 15% in an individual pixel. Short-lived impulsive heating events are observed, but they appear to be unrelated to the steady emission that dominates the active region. Furthermore, we find no evidence for warm emission that is spatially correlated with the hot emission, as would be expected if the high temperature loops are the result of impulsive heating. Finally, we also find that intensities in the "moss", the footpoints of high temperature loops, are consistent with steady heating models provided that we account for the local expansion of the loop from the base of the transition region to the corona. In combination, these results provide strong evidence that the heating in the core of an active region is effectively steady, that is, the time between heating events is short relative to the relevant radiative and conductive cooling times.

We present a Differential Emission Measure (DEM) analysis of the quiet solar corona on disk using data obtained by the Extreme-ultraviolet Imaging Spectrometer (EIS) on {\it Hinode}. We show that the expected quiet Sun DEM distribution can be recovered from judiciously selected lines, and that their average intensities can be reproduced to within 30%. We present a subset of these selected lines spanning the temperature range $\log$ T = 5.6 to 6.4 K that can be used to derive the DEM distribution reliably. The subset can be used without the need for extensive measurements and the observed intensities can be reproduced to within the estimated uncertainty in the pre-launch calibration of EIS. Furthermore, using this subset, we also demonstrate that the quiet coronal DEM distribution can be recovered on size scales down to the spatial resolution of the instrument (1$"$ pixels). The subset will therefore be useful for studies of small-scale spatial inhomogeneities in the coronal temperature structure, for example, in addition to studies requiring multiple DEM derivations in space or time. We apply the subset to 45 quiet Sun datasets taken in the period 2007 January to April, and show that although the absolute magnitude of the coronal DEM may scale with the amount of released energy, the shape of the distribution is very similar up to at least $\log$ T $\sim$ 6.2 K in all cases. This result is consistent with the view that the {\it shape} of the quiet Sun DEM is mainly a function of the radiating and conducting properties of the plasma and is fairly insensitive to the location and rate of energy deposition. This {\it universal} DEM may be sensitive to other factors such as loop geometry, flows, and the heating mechanism, but if so they cannot vary significantly from quiet Sun region to region.

The high densities, long lifetimes, and narrow emission measure distributions observed in coronal loops with apex temperatures near 1 MK are difficult to reconcile with physical models of the solar atmosphere. It has been proposed that the observed loops are actually composed of sub-resolution ``threads'' that have been heated impulsively and are cooling. We apply this heating scenario to nearly simultaneous observations of an evolving post-flare loop arcade observed with the EUVI/\textit{STEREO}, XRT/\textit{Hinode}, and \textit{TRACE} imagers and the EIS spectrometer on \textit{HINODE}. We find that it is possible to reproduce the extended loop lifetime, high electron density, and the narrow differential emission measure with a multi-thread hydrodynamic model provided that the time scale for the energy release is sufficiently short. The model, however, does not reproduce the evolution of the very high temperature emission observed with XRT. In XRT the emission appears diffuse and it may be that this discrepancy is simply due to the difficulty of isolating individual loops at these temperatures. This discrepancy may also reflect fundamental problems with our understanding of post-reconnection dynamics during the conductive cooling phase of loop evolution.

We present new measurements of the time variability of intensity, Doppler and non-thermal velocities in moss in an active region core observed by the EUV Imaging Spectrometer on Hinode in 2007, June. The measurements are derived from spectral profiles of the Fe 12 195A line. Using the 2" slit, we repeatedly scanned 150" by 150" in a few mins. This is the first time it has been possible to make such velocity measurements in the moss, and the data presented are the highest cadence spatially resolved maps of moss Doppler and non-thermal velocities ever obtained in the corona. The observed region produced numerous C- and M- class flares with several occurring in the core close to the moss. The magnetic field was therefore clearly changing in the active region core, so we ought to be able to detect dynamic signatures in the moss if they exist. Our measurements of moss intensities agree with previous studies in that a less than 15% variability is seen over a period of 16 hours. Our new measurements of Doppler and non-thermal velocities reveal no strong flows or motions in the moss, nor any significant variability in these quantities. The results confirm that moss at the bases of high temperature coronal loops is heated quasi-steadily. They also show that quasi-steady heating can contribute significantly even in the core of a flare productive active region. Such heating may be impulsive at high frequency, but if so it does not give rise to large flows or motions.

Measurements of the temperature and density structure of the solar corona provide critical constraints on theories of coronal heating. Unfortunately, the complexity of the solar atmosphere, observational uncertainties, and the limitations of current atomic calculations, particularly those for Fe, all conspire to make this task very difficult. A critical assessment of plasma diagnostics in the corona is essential to making progress on the coronal heating problem. In this paper we present an analysis of temperature and density measurements above the limb in the quiet corona using new observations from the EUV Imaging Spectrometer (EIS) on \textit{Hinode}. By comparing the Si and Fe emission observed with EIS we are able to identify emission lines that yield consistent emission measure distributions. With these data we find that the distribution of temperatures in the quiet corona above the limb is strongly peaked near 1 MK, consistent with previous studies. We also find, however, that there is a tail in the emission measure distribution that extends to higher temperatures. EIS density measurements from several density sensitive line ratios are found to be generally consistent with each other and with previous measurements in the quiet corona. Our analysis, however, also indicates that a significant fraction of the weaker emission lines observed in the EIS wavelength ranges cannot be understood with current atomic data.

The Extreme-ultraviolet Imaging Spectrometer (EIS) on the Hinode spacecraft obtains high resolution spectra of the solar atmosphere in two wavelength ranges: 170 - 210 and 250 - 290 angstroms. These wavelength regions contain a wealth of emission lines covering temperature regions from the chromosphere/transition region (e.g., He II, Si VII) up to flare temperatures (Fe XXIII, Fe XXIV). Of particular interest for understanding coronal heating is a line of Ca XVII at 192.858 angstroms, formed near a temperature of 6 million degrees. However, this line is blended with two Fe XI and six O V lines. In this paper we discuss a specific procedure to extract the Ca XVII line from the blend. We have performed this procedure on the raster data of five active regions and a limb flare, and demonstrated that the Ca XVII line can be satisfactorily extracted from the blend if the Ca XVII flux contributes to at least ~10% of the blend. We show examples of the high-temperature corona depicted by the Ca XVII emission and find that the Ca XVII emission has three morphological features in these active regions -- 1) `fat' medium-sized loops confined in a smaller space than the 1 million degree corona, 2) weaker, diffuse emission surrounding these loops that spread over the core of the active region, and 3) the locations of the strong Ca XVII loops are often weak in line emission formed from the 1 million degree plasma. We find that the emission measure ratio of the 6 million degree plasma relative to the cooler 1 million degree plasma in the core of the active regions, using the Ca XVII to Fe XI line intensity ratio as a proxy, can be as high as 10. Outside of the active region core where the 1 million degree loops are abundant, the ratio has an upper limit of about 0.5.

The relationships among coronal loop structures at different temperatures is not settled. Previous studies have suggested that coronal loops in the core of an active region are not seen cooling through lower temperatures and therefore are steadily heated. If loops were cooling, the transition region would be an ideal temperature regime to look for a signature of their evolution. The Extreme-ultraviolet Imaging Spectrometer (EIS) on Hinode provides monochromatic images of the solar transition region and corona at an unprecedented cadence and spatial resolution, making it an ideal instrument to shed light on this issue. Analysis of observations of active region 10978 taken in 2007 December 8 -- 19 indicates that there are two dominant loop populations in the active region: core multi-temperature loops that undergo a continuous process of heating and cooling in the full observed temperature range 0.4-2.5 MK and even higher as shown by the X-Ray Telescope (XRT); and peripheral loops which evolve mostly in the temperature range 0.4-1.3 MK. Loops at transition region temperatures can reach heights of 150 Mm in the corona above the limb and develop downflows with velocities in the range of 39-105 km/s.

Previous solar observations have shown that coronal loops near 1 MK are difficult to reconcile with simple heating models. These loops have lifetimes that are long relative to a radiative cooling time, suggesting quasi-steady heating. The electron densities in these loops, however, are too high to be consistent with thermodynamic equilibrium. Models proposed to explain these properties generally rely on the existence of smaller scale filaments within the loop that are in various stages of heating and cooling. Such a framework implies that there should be a distribution of temperatures within a coronal loop. In this paper we analyze new observations from the EUV Imaging Spectrometer (EIS) on \textit{Hinode}. EIS is capable of observing active regions over a wide range of temperatures (\ion{Fe}{8}--\ion{Fe}{17}) at relatively high spatial resolution (1\arcsec). We find that most isolated coronal loops that are bright in \ion{Fe}{12} generally have very narrow temperature distributions ($\sigma_T \lesssim 3\times10^5$ K), but are not isothermal. We also derive volumetric filling factors in these loops of approximately 10%. Both results lend support to the filament models.

From Doppler velocity maps of active regions constructed from spectra obtained by the Extreme-ultraviolet Imaging Spectrometer (EIS) on the Hinode spacecraft we observe large areas of outflow (20-50 km/s) that can persist for at least a day. These outflows occur in areas of active regions that are faint in coronal spectral lines formed at typical quiet Sun and active region temperatures. The outflows are positively correlated with non-thermal velocities in coronal plasmas. The bulk mass motions and non-thermal velocities are derived from spectral line centroids and line widths, mostly from a strong line of Fe XII at 195.12 Angstroms. The electron temperature of the outflow regions estimated from an Fe XIII to Fe XII line intensity ratio is about 1.2-1.4 MK. The electron density of the outflow regions derived from a density sensitive intensity ratio of Fe XII lines is rather low for an active region. Most regions average around 7E10+8 cm(-3), but there are variations on pixel spatial scales of about a factor of 4. We discuss results in detail for two active regions observed by EIS. Images of active regions in line intensity, line width, and line centroid are obtained by rastering the regions. We also discuss data from the active regions obtained from other orbiting spacecraft that support the conclusions obtained from analysis of the EIS spectra. The locations of the flows in the active regions with respect to the longitudinal photospheric magnetic fields suggest that these regions might be tracers of long loops and/or open magnetic fields that extend into the heliosphere, and thus the flows could possibly contribute significantly to the solar wind.

Damped Doppler shift oscillations have been observed in emission lines from ions formed at flare temperatures with the Solar Ultraviolet Measurements of Emitted Radiation spectrometer on the Solar and Heliospheric Observatory and with the Bragg Crystal Spectrometer on Yohkoh. This Letter reports the detection of low-amplitude damped oscillations in coronal emission lines formed at much lower temperatures observed with the EUV Imaging Spectrometer on the Hinode satellite. The oscillations have an amplitude of about 2 km/s, and a period of around 35 min. The decay times show some evidence for a temperature dependence with the lowest temperature of formation emission line (Fe XII 195.12 Angstroms) exhibiting a decay time of about 43 min, while the highest temperature of formation emission line (Fe XV 284.16 Angstroms) shows no evidence for decay over more than two periods of the oscillation. The data appear to be consistent with slow magnetoacoustic standing waves, but may be inconsistent with conductive damping.

The Soft X-ray intensity of loops in active region cores and corresponding footpoint, or moss, intensity observed in the EUV remain steady for several hours of observation. The steadiness of the emission has prompted many to suggest that the heating in these loops must also be steady, though no direct comparison between the observed X-ray and EUV intensities and the steady heating solutions of the hydrodynamic equations has yet been made. In this paper, we perform these simulations and simultaneously model the X-Ray and EUV moss intensities in one active regioncore with steady uniform heating. To perform this task, we introduce a new technique to constrain the model parameters using the measured EUV footpoint intensity to infer a heating rate. We find that a filling factor of 8% and loops that expand with height provides the best agreement with the intensity in two X-ray filters, though the simulated SXT Al12 intensity is 147% the observed intensity and the SXT AlMg intensity is 80% the observed intensity. From this solution, we determine the required heating rate scales as ${\bar{B}}^{0.29} L^{-0.95}$. Finally we discuss the future potential of this type of modeling, such as the ability to use density measurements to fully constrain filling factor, and its shortcomings, such as the requirement to use potential field extrapolations to approximate the coronal field.

Velocity structures of jets in a coronal hole have been derived for the first time. Hinode observations revealed the existence of many bright points in coronal holes. They are loop-shaped and sometimes associated with coronal jets. Spectra obtained with the Extreme ultraviolet Imaging Spectrometer (EIS) on board Hinode are analyzed to infer Doppler velocity of bright loops and jets in a coronal hole of the north polar region. Elongated jets above bright loops are found to be blue-shifted by 30 km/s at maximum, while foot points of bright loops are red-shifted. Blue-shifts detected in coronal jets are interpreted as upflows produced by magnetic reconnection between emerging flux and the ambient field in the coronal hole.

We use coordinated Hinode SOT/EIS observations that include high-resolution magnetograms, chromospheric and TR imaging and TR/coronal spectra in a first test to study how the dynamics of the TR are driven by the highly dynamic photospheric magnetic fields and the ubiquitous chromospheric waves. Initial analysis shows that these connections are quite subtle and require a combination of techniques including magnetic field extrapolations, frequency-filtered time-series and comparisons with synthetic chromospheric and TR images from advanced 3D numerical simulations. As a first result, we find signatures of magnetic flux emergence as well as 3 and 5 mHz wave power above regions of enhanced photospheric magnetic field in both chromospheric, transition region and coronal emission.

We present observations of transient active region heating events observed with the Extreme Ultraviolet Imaging Spectrometer (EIS) and X-ray Telescope (XRT) on Hinode. This initial investigation focuses on NOAA active region 10940 as observed by Hinode on February 1, 2007 between 12 and 19 UT. In these observations we find numerous examples of transient heating events within the active region. The high spatial resolution and broad temperature coverage of these instruments allows us to track the evolution of coronal plasma. The evolution of the emission observed with XRT and EIS during these events is generally consistent with loops that have been heated and are cooling. We have analyzed the most energetic heating event observed during this period, a small GOES B-class flare, in some detail and present some of the spectral signatures of the event, such as relative Doppler shifts at one of the loop footpoints and enhanced line widths during the rise phase of the event. While the analysis of these transient events has the potential to yield insights into the coronal heating mechanism, these observations do not rule out the possibility that there is a strong steady heating level in the active region. Detailed statistical analysis will be required to address this question definitively.

Observations of transition region emission in solar active regions represent a powerful tool for determining the properties of hot coronal loops. In this Letter we present the analysis of new observations of active region moss taken with the Extreme Ultraviolet Imaging Spectrometer (EIS) on the \textit{Hinode} mission. We find that the intensities predicted by steady, uniformly heated loop models are too intense relative to the observations, consistent with previous work. To bring the model into agreement with the observations a filling factor of about 16% is required. Furthermore, our analysis indicates that the filling factor in the moss is nonuniform and varies inversely with the loop pressure.

The EUV Imaging Spectrometer (EIS) on the Hinode satellite is capable of measuring emission line center positions for Gaussian line profiles to a fraction of a spectral pixel, resulting in relative solar Doppler-shift measurements with an accuracy of less than a km/s for strong lines. We show an example of the application of that capability to an active region sit-and-stare observation in which the EIS slit is placed at one location on the Sun and many exposures are taken while the spacecraft tracking keeps the same solar location within the slit. For the active region examined (NOAA 10930), we find that significant intensity and Doppler-shift fluctuations as a function of time are present at a number of locations. These fluctuations appear to be similar to those observed in high-temperature emission lines with other space-borne spectroscopic instruments. With its increased sensitivity over earlier spectrometers and its ability to image many emission lines simultaneously, EIS should provide significant new constraints on Doppler-shift oscillations in the corona.

In an attempt to test current initiation models of coronal mass ejections (CMEs), with an emphasis on the magnetic breakout model, we inspect the magnetic topology of the sources of 26 CME events in the context of their chromospheric and coronal response in an interval of approximately nine hours around the eruption onset. First, we perform current-free (potential) extrapolations of photospheric magnetograms to retrieve the key topological ingredients, such as coronal magnetic null points. Then we compare the reconnection signatures observed in the high cadence and high spatial resolution of the Transition Region And Coronal Explorer (TRACE) images with the location of the relevant topological features. The comparison reveals that only seven events can be interpreted in terms of the breakout model, which requires a multi-polar topology with pre-eruption reconnection at a coronal null. We find, however, that a larger number of events (twelve) can not be interpreted in those terms. No magnetic null is found in six of them. Seven other cases remain difficult to interpret. We also show that there are no systematic differences between the CME speed and flare energies of events under different interpretations.

Recent simulations of solar active regions have shown that it is possible to reproduce both the total intensity and the general morphology of the high temperature emission observed at soft X-ray wavelengths using static heating models. There is ample observational evidence, however, that the solar corona is highly variable, indicating a significant role for dynamical processes in coronal heating. Because they are computationally demanding, full hydrodynamic simulations of solar active regions have not been considered previously. In this paper we make first application of an impulsive heating model to the simulation of an entire active region, AR8156 observed on 1998 February 16. We model this region by coupling potential field extrapolations to full solutions of the time-dependent hydrodynamic loop equations. To make the problem more tractable we begin with a static heating model that reproduces the emission observed in 4 different \textit{Yohkoh} Soft X-Ray Telescope (SXT) filters and consider dynamical heating scenarios that yield time-averaged SXT intensities that are consistent with the static case. We find that it is possible to reproduce the total observed soft X-ray emission in all of the SXT filters with a dynamical heating model, indicating that nanoflare heating is consistent with the observational properties of the high temperature solar corona.

Many studies of the solar corona have shown that the observed X-ray luminosity is well correlated with the total unsigned magnetic flux. In this paper we present results from the extensive numerical modeling of active regions observed with the \textit{Solar and Heliospheric Observatory} (\textit{SOHO}) Extreme Ultraviolet Telescope (EIT), the \textit{Yohkoh} Soft X-ray Telescope (SXT), and the \textit{SOHO} Michelson Doppler Imager (MDI). We use potential field extrapolations to compute magnetic field lines and populate these field lines with solutions to the hydrostatic loop equations assuming steady, uniform heating. Our volumetric heating rates are of the form $\epsilon_H\sim \bar{B}^\alpha/L^\beta$, where $\bar{B}$ is the magnetic field strength averaged along a field line and $L$ is the loop length. Comparisons between the observed and simulated emission for 26 active regions suggest that coronal heating models that scale as $\epsilon_H\sim \bar{B}/L$ are in the closest argreement the observed emission at high temperatures. The field-braiding reconnection model of Parker, for example, is consistent with our results. We find, however, that the integrated intensities alone are insufficent to uniquely determine the parameterization of the volumetric heating rate. Visualizations of the emission are also needed. We also find that there are significant discrepancies between our simulation results and the lower temperature emission observed in the EIT channels.

Past hydrodynamic simulations have been able to reproduce the high temperatures and densities characteristic of solar flares. These simulations, however, have not been able to account for the slow decay of the observed flare emission or the absence of blueshifts in high spectral resolution line profiles. Recent work has suggested that modeling a flare as an sequence of independently heated threads instead of as a single loop may resolve the discrepancies between the simulations and observations. In this paper we present a method for computing multi-thread, time-dependent hydrodynamic simulations of solar flares and apply it to observations of the Masuda flare of 1992 January 13. We show that it is possible to reproduce the temporal evolution of high temperature thermal flare plasma observed with the instruments on the \textit{GOES} and \textit{Yohkoh} satellites. The results from these simulations suggest that the heating time-scale for a individual thread is on the order of 200 s. Significantly shorter heating time scales (20 s) lead to very high temperatures and are inconsistent with the emission observed by \textit{Yohkoh}.

An Impulsive Heating Multiple Strand (IHMS) Model is able to reproduce the observational characteristics of EUV (~ 1 MK) active region loops. This model implies that some of the loops must reach temperatures where X-ray filters are sensitive (> 2.5 MK) before they cool to EUV temperatures. Hence, some bright EUV loops must be preceded by bright X-ray loops. Previous analysis of X-ray and EUV active region observations, however, have concluded that EUV loops are not preceded by X-ray loops. In this paper, we examine two active regions observed in both X-ray and EUV filters and analyze the evolution of five loops over several hours. These loops first appear bright in the X-ray images and later appear bright in the EUV images. The delay between the appearance of the loops in the X-ray and EUV filters is as little as 1 hour and as much as 3 hours. All five loops appear as single ``monolithic'' structures in the X-ray images, but are resolved into many smaller structures in the (higher resolution) EUV images. The positions of the loops appear to shift during cooling implying that the magnetic field is changing as the loops evolve. There is no correlation between the brightness of the loop in the X-ray and EUV filters meaning a bright X-ray loop does not necessarily cool to a bright EUV loop and vice versa. The progression of the loops from X-ray images to EUV images and the observed substructure is qualitatively consistent with the IMHS model.

Recent observations with TRACE reveal that the time delay between the appearance of a cooling loop in different EUV temperature filters is proportional to the loop length, dt_12 ~ L. We model this cooling delay in terms of radiative loss and confirm this linear relationship theoretically. We derive an expression that can be used to constrain the coronal iron enhancement alpha_Fe=A_Fe^cor/A_Fe^Ph relative to the photospheric value as function of the cooling delay dt_12, flux F_2, loop width w, and filling factor q_w < 1. With this relation we find upper limits on the iron abundance enhancement of alpha_Fe < 4.8+/-1.7 for 10 small-scale nanoflare loops, and alpha_Fe < 1.4+/-0.4 for 5 large-scale loops, in the temperature range of T~1.0-1.4 MK. This result supports the previous finding that low-FIP elements, including Fe, are enhanced in the corona. The same relation constitutes also a lower limit for the filling factor, which is q_w > 0.2+/-0.1 and q_w > 0.8+/-0.2 for the two groups of coronal loops.