Normalized to: Walther, C.
[1]
oai:arXiv.org:1806.07525 [pdf] - 1702878
Electronics Instrumentation for the Greenland Telescope
Kubo, Derek;
Han, Chih-Chiang;
Nishioka, Hiroaki;
Chilson, Ryan;
Srinivasan, Ranjani;
Yen, Sheng- Feng;
Fu, Kuo-Chieh;
Jiang, Homin;
Liu, Kuan-Yu;
Wei, Ta-Shun;
Huang, Chih-Wei;
Yu, Chen- Yu;
Oshiro, Peter;
Chang, Shu-Hao;
Chen, Chung-Cheng;
Raffin, Philippe;
Huang, Yau-De;
Martin-Cocher, Pierre;
Chen, Ming-Tang;
Inoue, Makoto;
Matsushita, Satoki;
Asada, Keiichi;
Koyama, Shoko;
Koch, Patrick;
Ho, Paul T. P.;
Shaw, Yang-Tai;
Norton, Timothy J.;
Patel, Nimesh A.;
Doeleman, Shepherd S.;
Bintley, Daniel;
Walther, Craig;
Friberg, Per;
Dempsey, Jessica;
Ogawa, Hideo;
Kimura, Kimihiro;
Hasegawa, Yutaka;
Liu, Ching-Tang;
Han, Kou-Chang;
Chang, Song-Chu;
Lu, Li-Ming
Submitted: 2018-06-19
The Greenland Telescope project has recently participated in an experiment to
image the supermassive black hole shadow at the center of M87 using Very Long
Baseline Interferometry technique in April of 2018. The antenna consists of the
12-m ALMA North American prototype antenna that was modified to support two
auxiliary side containers and to withstand an extremely cold environment. The
telescope is currently at Thule Air Base in Greenland with the long-term goal
to move the telescope over the Greenland ice sheet to Summit Station. The GLT
currently has a single cryostat which houses three dual polarization receivers
that cover 84-96 GHz, 213-243 GHz and 271-377 GHz bands. A hydrogen maser
frequency source in conjunction with high frequency synthesizers are used to
generate the local oscillator references for the receivers. The intermediate
frequency outputs of each receiver cover 4-8 GHz and are heterodyned to
baseband for digitization within a set of ROACH-2 units then formatted for
recording onto Mark-6 data recorders. A separate set of ROACH-2 units operating
in parallel provides the function of auto-correlation for real-time spectral
analysis. Due to the stringent instrumental stability requirements for
interferometry a diagnostic test system was incorporated into the design. Tying
all of the above equipment together is the fiber optic system designed to
operate in a low temperature environment and scalable to accommodate a larger
distance between the control module and telescope for Summit Station. A report
on the progress of the above electronics instrumentation system will be
provided.
[2]
oai:arXiv.org:1301.3650 [pdf] - 832812
SCUBA-2: The 10000 pixel bolometer camera on the James Clerk Maxwell
Telescope
Holland, W. S.;
Bintley, D.;
Chapin, E. L.;
Chrysostomou, A.;
Davis, G. R.;
Dempsey, J. T.;
Duncan, W. D.;
Fich, M.;
Friberg, P.;
Halpern, M.;
Irwin, K. D.;
Jenness, T.;
Kelly, B. D.;
MacIntosh, M. J.;
Robson, E. I.;
Scott, D.;
Ade, P. A. R.;
Atad-Ettedgui, E.;
Berry, D. S.;
Craig, S. C.;
Gao, X.;
Gibb, A. G.;
Hilton, G. C.;
Hollister, M. I.;
Kycia, J. B.;
Lunney, D. W.;
McGregor, H.;
Montgomery, D.;
Parkes, W.;
Tilanus, R. P. J.;
Ullom, J. N.;
Walther, C. A.;
Walton, A. J.;
Woodcraft, A. L.;
Amiri, M.;
Atkinson, D.;
Burger, B.;
Chuter, T.;
Coulson, I. M.;
Doriese, W. B.;
Dunare, C.;
Economou, F.;
Niemack, M. D.;
Parsons, H. A. L.;
Reintsema, C. D.;
Sibthorpe, B.;
Smail, I.;
Sudiwala, R.;
Thomas, H. S.
Submitted: 2013-01-16
SCUBA-2 is an innovative 10000 pixel bolometer camera operating at
submillimetre wavelengths on the James Clerk Maxwell Telescope (JCMT). The
camera has the capability to carry out wide-field surveys to unprecedented
depths, addressing key questions relating to the origins of galaxies, stars and
planets. With two imaging arrays working simultaneously in the atmospheric
windows at 450 and 850 microns, the vast increase in pixel count means that
SCUBA-2 maps the sky 100-150 times faster than the previous SCUBA instrument.
In this paper we present an overview of the instrument, discuss the physical
characteristics of the superconducting detector arrays, outline the observing
modes and data acquisition, and present the early performance figures on the
telescope. We also showcase the capabilities of the instrument via some early
examples of the science SCUBA-2 has already undertaken. In February 2012,
SCUBA-2 began a series of unique legacy surveys for the JCMT community. These
surveys will take 2.5 years and the results are already providing complementary
data to the shorter wavelength, shallower, larger-area surveys from Herschel.
The SCUBA-2 surveys will also provide a wealth of information for further study
with new facilities such as ALMA, and future telescopes such as CCAT and SPICA.
[3]
oai:arXiv.org:1208.4622 [pdf] - 1150838
A new era of wide-field submillimetre imaging: on-sky performance of
SCUBA-2
Dempsey, Jessica T.;
Holland, Wayne S.;
Chrysostomou, Antonio;
Berry, David S.;
Bintley, Daniel;
Chapin, Edward L.;
Craig, Simon C.;
Coulson, Iain M.;
Davis, Gary R.;
Friberg, Per;
Jenness, Tim;
Gibb, Andy G.;
Parsons, Harriet A. L.;
Scott, Douglas;
Thomas, Holly S.;
Tilanus, Remo P. J.;
Robson, Ian;
Walther, Craig A.
Submitted: 2012-08-22
SCUBA-2 is the largest submillimetre wide-field bolometric camera ever built.
This 43 square arc-minute field-of-view instrument operates at two wavelengths
(850 and 450 microns) and has been installed on the James Clerk Maxwell
Telescope on Mauna Kea, Hawaii. SCUBA-2 has been successfully commissioned and
operational for general science since October 2011. This paper presents an
overview of the on-sky performance of the instrument during and since
commissioning in mid-2011. The on-sky noise characteristics and NEPs of the 450
and 850 micron arrays, with average yields of approximately 3400 bolometers at
each wavelength, will be shown. The observing modes of the instrument and the
on-sky calibration techniques are described. The culmination of these efforts
has resulted in a scientifically powerful mapping camera with sensitivities
that allow a square degree of sky to be mapped to 10 mJy/beam rms at 850 micron
in 2 hours and 60 mJy/beam rms at 450 micron in 5 hours in the best weather.
[4]
oai:arXiv.org:0907.3610 [pdf] - 1003008
HARP/ACSIS: A submillimetre spectral imaging system on the James Clerk
Maxwell Telescope
Buckle, J. V.;
Hills, R. E.;
Smith, H.;
Dent, W. R. F.;
Bell, G.;
Curtis, E. I.;
Dace, R.;
Gibson, H.;
Graves, S. F.;
Leech, J.;
Richer, J. S.;
Williamson, R.;
Withington, S.;
Yassin, G.;
Bennett, R.;
Hastings, P.;
Laidlaw, I.;
Lightfoot, J. F.;
Burgess, T.;
Dewdney, P. E.;
Hovey, G.;
Willis, A. G.;
Redman, R.;
Wooff, B.;
Berry, D. S.;
Cavanagh, B.;
Davis, G. R.;
Dempsey, J.;
Friberg, P.;
Jenness, T.;
Kackley, R.;
Rees, N. P.;
Tilanus, R.;
Walther, C.;
Zwart, W.;
Klapwijk, T. M.;
Kroug, M.;
Zijlstra, T.
Submitted: 2009-07-21
This paper describes a new Heterodyne Array Receiver Programme (HARP) and
Auto-Correlation Spectral Imaging System (ACSIS) that have recently been
installed and commissioned on the James Clerk Maxwell Telescope (JCMT). The
16-element focal-plane array receiver, operating in the submillimetre from 325
to 375 GHz, offers high (three-dimensional) mapping speeds, along with
significant improvements over single-detector counterparts in calibration and
image quality. Receiver temperatures are $\sim$120 K across the whole band and
system temperatures of $\sim$300K are reached routinely under good weather
conditions. The system includes a single-sideband filter so these are SSB
figures. Used in conjunction with ACSIS, the system can produce large-scale
maps rapidly, in one or more frequency settings, at high spatial and spectral
resolution. Fully-sampled maps of size 1 square degree can be observed in under
1 hour.
The scientific need for array receivers arises from the requirement for
programmes to study samples of objects of statistically significant size, in
large-scale unbiased surveys of galactic and extra-galactic regions. Along with
morphological information, the new spectral imaging system can be used to study
the physical and chemical properties of regions of interest. Its
three-dimensional imaging capabilities are critical for research into
turbulence and dynamics. In addition, HARP/ACSIS will provide highly
complementary science programmes to wide-field continuum studies, and produce
the essential preparatory work for submillimetre interferometers such as the
SMA and ALMA.