Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2.

We have developed a passive 350 GHz (850 {\mu}m) video-camera to demonstrate lumped element kinetic inductance detectors (LEKIDs) -- designed originally for far-infrared astronomy -- as an option for general purpose terrestrial terahertz imaging applications. The camera currently operates at a quasi-video frame rate of 2 Hz with a noise equivalent temperature difference per frame of $\sim$0.1 K, which is close to the background limit. The 152 element superconducting LEKID array is fabricated from a simple 40 nm aluminum film on a silicon dielectric substrate and is read out through a single microwave feedline with a cryogenic low noise amplifier and room temperature frequency domain multiplexing electronics.

SCUBA-2 is an innovative 10,000 pixel submillimeter camera due to be delivered to the James Clerk Maxwell Telescope in late 2006. The camera is expected to revolutionize submillimeter astronomy in terms of the ability to carry out wide-field surveys to unprecedented depths addressing key questions relating to the origins of galaxies, stars and planets. This paper presents an update on the project with particular emphasis on the laboratory commissioning of the instrument. The assembly and integration will be described as well as the measured thermal performance of the instrument. A summary of the performance results will be presented from the TES bolometer arrays, which come complete with in-focal plane SQUID amplifiers and multiplexed readouts, and are cooled to 100mK by a liquid cryogen-free dilution refrigerator. Considerable emphasis has also been placed on the operating modes of the instrument and the common-user aspect of the user interface and data reduction pipeline. These areas will also be described in the paper.

SCUBA-2, which replaces SCUBA (the Submillimeter Common User Bolometer Array) on the James Clerk Maxwell Telescope (JCMT) in 2006, is a large-format bolometer array for submillimeter astronomy. Unlike previous detectors which have used discrete bolometers, SCUBA-2 has two dc-coupled, monolithic, filled arrays with a total of ~10,000 bolometers. It will offer simultaneous imaging of a 50 sq-arcmin field of view at wavelengths of 850 and 450 microns. SCUBA-2 is expected to have a huge impact on the study of galaxy formation and evolution in the early Universe as well as star and planet formation in our own Galaxy. Mapping the sky to the same S/N up to 1000 times faster than SCUBA, it will also act as a pathfinder for the new submillimeter interferometers such as ALMA. SCUBA-2's absorber-coupled pixels use superconducting transition edge sensors operating at 120 mK for performance limited by the sky background photon noise. The monolithic silicon detector arrays are deep-etched by the Bosch process to isolate the pixels on silicon nitride membranes. Electrical connections are made through indium bump bonds to a SQUID time-domain multiplexer (MUX). We give an overview of the SCUBA-2 system and an update on its status, and describe some of the technological innovations that make this unique instrument possible.

We perform fully self-consistent stellar dynamical simulations of the accretion of a companion ("satellite") galaxy by a large disk galaxy to investigate the interaction between the disk, halo, and satellite components of the system during a merger. Our fiducial encounter begins with a satellite in a prograde, circular orbit inclined thirty degrees with respect to the disk plane at a galactocentric distance of six disk scalelengths. The satellite's mass is 10% of the disk's mass and its half-mass radius is about 1.3 kpc. The system is modelled with 500 000 particles, sufficient to mitigate numerical relaxation noise over the merging time. The satellite sinks in only ~1 Gyr and a core containing ~45% of its initial mass reaches the centre of the disk. With so much of the satellite's mass remaining intact, the disk sustains significant damage as the satellite passes through. At the solar circle we find that the disk thickens ~60%, the velocity dispersions increase by $\Delta\mbox{\boldmath$\sigma$} \simeq (10,8,8)$ km/s to $(\sigma_R, \sigma_\phi, \sigma_z) \simeq (48, 42, 38)$ km/s, and the asymmetric drift is unchanged at ~18 km/s. Although the disk is not destroyed by these events (hence "minor" mergers), its final state resembles a disk galaxy of earlier Hubble type than its initial state, thicker and hotter, with the satellite's core enhancing the bulge. Thus minor mergers continue to be a promising mechanism for driving galaxy evolution.

Using numerical simulation, we study the response of a disk galaxy to a merger involving a low-mass satellite companion. During a prograde satellite accretion, the disk galaxy forms a strong bar in response to the perturbation of the companion. After the accretion event is over, the bar buckles vertically due to a bending instability, sending disk material well out of the disk plane. The material forms into an X-shaped feature when seen edge-on, morphologically similar to X-structures observed in several S0/Sa galaxies. The mechanism described here unites previously suggested accretion and bar instability hypotheses for forming X-structures into a self-consistent scenario for merger-induced formation and evolution of S0 galaxies. To complement these models, we also present observations of the peculiar S0 galaxy Hickson 87a. The thick disk, isophotal warping, and strong X-structure described in the merger model are all evident in Hickson 87a, suggesting this galaxy may be an excellent example of such merger-induced galaxy evolution.