We present the first major release of data from the SAMI Galaxy Survey. This data release focuses on the emission-line physics of galaxies. Data Release One includes data for 772 galaxies, about 20% of the full survey. Galaxies included have the redshift range 0.004 < z < 0.092, a large mass range (7.6 < log(Mstellar/M$_\odot$) < 11.6), and star-formation rates of 10^-4 to 10^1\ M$_\odot$/yr. For each galaxy, we include two spectral cubes and a set of spatially resolved 2D maps: single- and multi-component emission-line fits (with dust extinction corrections for strong lines), local dust extinction and star-formation rate. Calibration of the fibre throughputs, fluxes and differential-atmospheric-refraction has been improved over the Early Data Release. The data have average spatial resolution of 2.16 arcsec (FWHM) over the 15~arcsec diameter field of view and spectral (kinematic) resolution R=4263 (sigma=30km/s) around Halpha. The relative flux calibration is better than 5\% and absolute flux calibration better than $\pm0.22$~mag, with the latter estimate limited by galaxy photometry. The data are presented online through the Australian Astronomical Observatory's Data Central.

The Australian Astronomical Observatory's TAIPAN instrument deploys 150 Starbug robots to position optical fibres to accuracies of 0.3 arcsec, on a 32 cm glass field plate on the focal plane of the 1.2 m UK-Schmidt telescope. This paper describes the software system developed to control and monitor the Starbugs, with particular emphasis on the automated path-finding algorithms, and the metrology software which keeps track of the position and motion of individual Starbugs as they independently move in a crowded field. The software employs a tiered approach to find a collision-free path for every Starbug, from its current position to its target location. This consists of three path-finding stages of increasing complexity and computational cost. For each Starbug a path is attempted using a simple method. If unsuccessful, subsequently more complex (and expensive) methods are tried until a valid path is found or the target is flagged as unreachable.

The High Efficiency and Resolution Multi Element Spectrograph, HERMES, is a facility-class optical spectrograph for the Anglo-Australian Telescope (AAT). It is designed primarily for Galactic Archaeology, the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way. The goal of the GALAH survey is to reconstruct the mass assembly history of the Milky Way through a detailed chemical abundance study of one million stars. The spectrograph is based at the AAT and is fed by the existing 2dF robotic fiber positioning system. The spectrograph uses volume phase holographic gratings to achieve a spectral resolving power of 28,000 in standard mode and also provides a high-resolution mode ranging between 40,000 and 50,000 using a slit mask. The GALAH survey requires an SNR greater than 100 for a star brightness of V ?= 14 in an exposure time of one hour. The total spectral coverage of the four channels is about 100 nm between 370 and 1000 nm for up to 392 simultaneous targets within the 2-degree field of view. HERMES has been commissioned over three runs, during bright time in October, November, and December 2013, in parallel with the beginning of the GALAH pilot survey, which started in November 2013. We present the first-light results from the commissioning run and the beginning of the GALAH survey, including performance results such as throughput and resolution, as well as instrument reliability.

The TAIPAN instrument, currently being developed for the Australian Astronomical Observatory's UK Schmidt telescope at Siding Spring Observatory, makes use of the AAO's Starbug technology to deploy 150 science fibres to target positions on the optical plane. This paper describes the software system for controlling and deploying the fibre-bearing Starbug robots. The TAIPAN software is responsible for allocating each Starbug to its next target position based on its current position and the distribution of targets, finding a collision-free path for each Starbug, and then simultaneously controlling the Starbug hardware in a closed loop, with a metrology camera used to determine the position of each Starbug in the field during reconfiguration. The software is written in C++ and Java and employs a DRAMA middleware layer (Farrell et al. 1995).

CYCLOPS2 is an upgrade for the UCLES high resolution spectrograph on the Anglo-Australian Telescope, scheduled for commissioning in semester 2012A. By replacing the 5 mirror Coud\'e train with a Cassegrain mounted fibre-based image slicer CYCLOPS2 simultaneously provides improved throughput, reduced aperture losses and increased spectral resolution. Sixteen optical fibres collect light from a 5.0 arcsecond^2 area of sky and reformat it into the equivalent of a 0.6 arcsecond wide slit, delivering a spectral resolution of R = 70000 and up to twice as much flux as the standard 1 arcsecond slit of the Coud\'e train. CYCLOPS2 also adds support for simultaneous ThAr wavelength calibration via a dedicated fibre. CYCLOPS2 consists of three main components, the fore-optics unit, fibre bundle and slit unit. The fore optics unit incorporates magnification optics and a lenslet array and is designed to mount to the CURE Cassegrain instrument interface, which provides acquisition, guiding and calibration facilities. The fibre bundle transports the light from the Cassegrain focus to the UCLES spectrograph at Coud\'e and also includes a fibre mode scrambler. The slit unit consists of the fibre slit and relay optics to project an image of the slit onto the entrance aperture of the UCLES spectrograph. CYCLOPS2 builds on experience with the first generation CYCLOPS fibre system, which we also describe in this paper. We present the science case for an image slicing fibre feed for echelle spectroscopy and describe the design of CYCLOPS and CYCLOPS2.

In the Virtual Observatory era, where we intend to expose scientists (or software agents on their behalf) to a stream of observations from all existing facilities, the ability to access and to further interpret the origin, relationships, and processing steps on archived astronomical assets (their Provenance) is a requirement for proper observation selection, and quality assessment. In this article we present the different use cases Data Provenance is needed for, the challenges inherent to building such a system for the ESO archive, and their link with ongoing work in the International Virtual Observatory Alliance (IVOA).

We present a comparison of the gas and dust properties of the dense interstellar matter in six nearby star-forming regions (d<500 pc): rho Oph, Cha I, R CrA, IC 348, NGC 1333, and Orion. We measure from Chandra and XMM-Newton observations the X-ray absorption toward pre-main sequence stars (PMS) without accretion disks (i.e., Class III sources) to obtain the total hydrogen column density N_{H,X}. For these sources we take from the literature the corresponding dust extinction in the near-infrared, A_J, or when unavailable we derive it from SED fitting using the available DENIS, 2MASS, ISOCAM and other data. We then compare N_{H,X} and A_J for each object, up to unprecedently high extinction. For the rho Oph dark cloud with a relatively large sample of 20 bona-fide Class III sources, we probe the extinction up to A_J <~ 14 (A_V <~ 45), and find a best-fit linear relation N_{H,X}/A_J = 5.6 (+/- 0.4)x10^{21} cm^{-2} mag^{-1}, adopting standard ISM abundances. The other regions reveal a large dispersion in the N_{H,X}/A_J ratio for each source but for lack of adequate IR data these studies remain limited to moderate extinctions (A_J <~ 1.5 or A_V <~5). For rho Oph, the N_{H,X}/A_J ratio is significantly lower (>~2 sigma) than the galactic value, derived using the standard extinction curve (R_V = 3.1). This result is consistent with the recent downwards revision of the metallicity of the Sun and stars in the solar vicinity. We find that the rho Oph dense cloud has the same metallicity than the local ISM when assuming that the galactic gas-to-dust ratio remains unchanged. The difference between galactic and local values of the gas-to-dust ratio can thus be attributed entirely to a difference in metallicity.

We define a sample designed to select low-mass T Tauri stars and young brown dwarfs using DENIS data in the Chamaeleon II molecular cloud. We use a star count method to construct an extinction map of the Chamaeleon II cloud. We select our low-mass T Tauri star and young brown dwarf candidates by their strong infrared colour excess in the I-J/J-K_s colour-colour dereddened diagram. We retain only objects with colours I-J>2, and spatially distributed in groups around the cloud cores. This provides a sample of 70 stars of which 4 are previously known T Tauri stars. We have carefully checked the reliability of all these objects by visual inspection on the DENIS images. Thanks to the association of the optical I-band to the infra-red J and K_s bands in DENIS, we can apply this selection method to all star formation regions observed in the southern hemisphere. We also identify six DENIS sources with X-ray sources detected by ROSAT. Assuming that they are reliable low-mass candidates and using the evolutionary models for low-mass stars, we estimate the age of these sources between 1 Myr and < 10 Myr.

We present a model for the hydrogenation states of Polycyclic Aromatic Hydrocarbons (PAHs) in the diffuse interstellar medium. First, we study the abundance of hydrogenation and charge states of PAHs due to photo-ionization, photo-dissociation in the interstellar UV field, electron recombination and chemical reactions between PAH cations and H or H_2. For PAH cations, we find that the dehydrogenation effects are dominant. The hydrogenation state of PAHs depends strongly on the H density, the size of the molecule and UV field. In diffuse clouds with low H density and normal UV radiation, PAHs containing less than 40 C are completely or strongly dehydrogenated whereas at high H density, they are normally hydrogenated. The partially dehydrogenated species dominate in intermediate density clouds. PAHs above 40 C are quite stable and are fully hydrogenated, which would favor their spectroscopic search in near IR surveys of Diffuse Interstellar Bands (DIBs).