We investigate methods to calibrate the non-common path aberrations at an adaptive optics system having a wavefront-correcting device working at an extremely high resolution (larger than 150x150). We use focal-plane images collected successively, the corresponding phase-diversity information and numerically efficient algorithms to calculate the required wavefront updates. The wavefront correction is applied iteratively until the algorithms converge. Different approaches are studied. In addition of the standard Gerchberg-Saxton algorithm, we test the extension of the Fast & Furious algorithm that uses three images and creates an estimate of the pupil amplitudes. We also test recently proposed phase-retrieval methods based on convex optimisation. The results indicate that in the framework we consider, the calibration task is easiest with algorithms similar to the Fast & Furious.

We present two complementary algorithms suitable for using focal-plane measurements to control a wavefront corrector with an extremely high spatial resolution. The algorithms use linear approximations to iteratively minimize the aberrations seen by the focal-plane camera. The first algorithm, Fast & Furious (FF), uses a weak-aberration assumption and pupil symmetries to achieve fast wavefront reconstruction. The second algorithm, an extension to FF, can deal with an arbitrary pupil shape; it uses a Gerchberg-Saxton style error reduction to determine the pupil amplitudes. Simulations and experimental results are shown for a spatial light modulator controlling the wavefront with a resolution of 170 x 170 pixels. The algorithms increase the Strehl ratio from ~0.75 to 0.98-0.99, and the intensity of the scattered light is reduced throughout the whole recorded image of 320 x 320 pixels. The remaining wavefront rms error is estimated to be ~0.15 rad with FF and ~0.10 rad with FF-GS.

We present a promising approach to the extremely fast sensing and correction of small wavefront errors in adaptive optics systems. As our algorithm's computational complexity is roughly proportional to the number of actuators, it is particularly suitable to systems with 10,000 to 100,000 actuators. Our approach is based on sequential phase diversity and simple relations between the point-spread function and the wavefront error in the case of small aberrations. The particular choice of phase diversity, introduced by the deformable mirror itself, minimizes the wavefront error as well as the computational complexity. The method is well suited for high-contrast astronomical imaging of point sources such as the direct detection and characterization of exoplanets around stars, and it works even in the presence of a coronagraph that suppresses the diffraction pattern. The accompanying paper in these proceedings by Korkiakoski et al. describes the performance of the algorithm using numerical simulations and laboratory tests.