The background field is assumed to play prime role in the erupting structures like prominences. In the flux rope models, the critical decay index ($n_c$) is a measure of the rate at which background field intensity decreases with height over the flux rope or erupting structure. In the real observations, the critical height of the background field is unknown, so a typical value of $n_{c}=1.5$ is adopted from the numerical studies. In this study, we determined the $n_c$ of 10 prominence eruptions (PEs). The prominence height in 3D is derived from two-perspective observations of \textit{Solar Dynamics Observatory} and \textit{Solar TErrestrial RElations Observatory}. Synoptic maps of photospheric radial magnetic field are used to construct the background field in the corona. During the eruption, the height-time curve of the sample events exhibits the slow and fast-rise phases and is fitted with the linear-cum-exponential model. From this model, the onset height of fast-rise motion is determined and is considered as the critical height for the onset of the torus-instability because the erupting structure is allowed to expand exponentially provided there is no strapping background field. Corresponding to the critical height, the $n_c$ values of our sample events are varied to be in the range of 0.8-1.3. Additionally, the kinematic analysis suggests that the acceleration of PEs associated with flares are significantly enhanced compared to flare-less PEs. We found that the flare magnetic reconnection is the dominant contributor than the torus-instability to the acceleration process during the fast-rise phase of flare-associated PEs in low corona ($<1.3R_{\odot}$).

Using time-sequence vector magnetic field observation from \textit{Helioseismic and Magnetic Imager}, we examined the connection of non-neutralized currents and the observed activity in 20 solar active-regions (ARs). The net current in a given magnetic polarity is algebraic sum of direct-current (DC) and return-current (RC) and the ratio $|DC/RC|$ is a measure of degree of net-current-neutralization (NCN). In the emerging ARs, the non-neutrality of these currents builds with the onset of flux emergence, following the relaxation to neutrality during the separation motion of bipolar regions. Accordingly, some emerging ARs are source regions of CMEs occurring at the time of higher level non-neutrality. ARs in the post-emergence phase can be CME productive provided they have interacting bipolar regions with converging and shearing motions. In these cases, the net current evolves with higher level ($>1.3$) of non-neutrality. Differently, the $|DC/RC|$ in flaring and quiet ARs vary near unity. In all the AR samples, the $|DC/RC|$ is higher for chiral current density than that for vertical current density. Owing to the fact that the non-neutralized currents arise in the vicinity of sheared polarity-inversion-lines (SPILs), the profiles of the total length of SPIL segments and the degree of NCN follow each other with a positive correlation. We find that the SPIL is localized as small segments in flaring-ARs whereas it is long continuous in CME-producing ARs. These observations demonstrate the dividing line between the CMEs and flares with the difference being in global or local nature of magnetic shear in the AR that reflected in non-neutralized currents.

Using observations from Solar Dynamics Observatory, we studied an interesting example of a sigmoid formation and eruption from small-scale flux canceling regions of active region (AR) 11942. Analysis of HMI and AIA observations infer that initially the AR is compact and bipolar in nature, evolved to sheared configuration consisting of inverse J-shaped loops hosting a filament channel over a couple of days. By tracking the photospheric magnetic features, shearing and converging motions are observed to play a prime role in the development of S-shaped loops and further flux cancellation leads to tether-cutting reconnection of J-loops. This phase is co-temporal with the filament rise motion followed by sigmoid eruption at 21:32 UT on January 6. The flux rope rises in phases of slow (v$_{avg}$ = 26 km~s$^{-1}$) and fast (a$_{avg}$= 55 ms$^{-2}$) rise motion categorizing the CME as slow with an associated weak C1.0 class X-ray flare. The flare ribbon separation velocity peaks at around peak time of the flare at which maximum reconnection rate (2.14 Vcm$^{-1}$) occurs. Further, the EUV light-curves of 131, 171\AA~have delayed peaks of 130 minutes compared to 94\AA~and is explained by differential emission measure. Our analysis suggests that the energy release is proceeded in a much long time duration, manifesting the onset of filament rise and eventual eruption driven by converging and canceling flux in the photosphere. Unlike strong eruption events, the observed slow CME and weak flare are indications of slow runway tether-cutting reconnection where most of the sheared arcade is relaxed during the extended post phase of the eruption.

Using the photospheric magnetic and coronal observations of Solar Dynamics Observatory, we studied the build-up and eruption of coronal non-potential magnetic structure in emerging active region (AR) 12673. The velocity field derived from tracked vector-magnetograms indicates persistent shear and converging motions of flux regions about the polarity inversion line (PIL). A major helicity injection occurs during rapid flux emergence consistent with the very fast flux emergence phase. While this helicity flux builds-up the sigmoid by September 4, the helicity injection by the continued shear and converging motions in the later evolution contributes to sigmoid sustenance and its core field twist as a manifestation of the flux rope which erupts after exceeding critical value of twist. Moreover, the total length of sheared PIL segments correlates with the non-neutralized current and maintains a higher value in both the polarity regions as a signature of eruptive capability of the AR according to the flux rope models. The modelled magnetic field qualitatively reproduces the sigmoidal structure capturing major features like twisted core flux as flux rope, and hook-shaped parts connecting at the middle of the PIL. Study of quasi-separatrix-layers reveals that the sheared arcade, enclosing the flux rope, is stressed to a critically stable state and its coronal height becomes doubled from September 4-6. While demonstrating the fast injection of helicity per unit flux as the crucial factor for severe space-weather events, this study explains the formation of the flux rope and recurrent eruptive nature of the AR by the critically stable state of sheared arcade early on September 6.

Three-dimensional magnetic topology is crucial to understanding the explosive release of magnetic energy in the corona during solar flares. Much attention has been given to the pre-flare magnetic topology to identify candidate sites of magnetic reconnection, yet it is unclear how the magnetic reconnection and its attendant topological changes shape the eruptive structure and how the topology evolves during the eruption. Here we employed a realistic, data-constrained magnetohydrodynamic simulation to study the evolving magnetic topology for an X9.3 eruptive flare that occurred on 2017 September 6. The simulation successfully reproduces the eruptive features and processes in unprecedented detail. The numerical results reveal that the pre-flare corona contains multiple twisted flux systems with different connections, and during the eruption, these twisted fluxes form a coherent flux rope through tether-cutting-like magnetic reconnection below the rope. Topological analysis shows that the rising flux rope is wrapped by a quasi-separatrix layer, which intersects itself below the rope, forming a topological structure known as hyperbolic flux tube, where a current sheet develops, triggering the reconnection. By mapping footpoints of the newly-reconnected field lines, we are able to reproduce both the spatial location and, for the first time, the temporal separation of the observed flare ribbons, as well as the dynamic boundary of the flux rope's feet. Futhermore, the temporal profile of the total reconnection flux is comparable to the soft X-ray light curve. Such a sophisticated characterization of the evolving magnetic topology provides important insight into the eventual understanding and forecast of solar eruptions.

Using the HMI/SDO vector magnetic field observations, we studied the relation of degree of magnetic non-potentiality with the observed flare/CME in active regions. From a sample of 77 flare/CME cases, we found a general relation that degree of non-potentiality is positively correlated with the flare strength and the associated CME speeds. Since the magnetic flux in the flare-ribbon area is more related to the reconnection, we trace the strong gradient polarity inversion line (SGPIL), Schrijver's R value manually along the flare-ribbon extent. Manually detected SGPIL length and R values show higher correlation with the flare strength and CME speed than the automatically traced values without flare-ribbon information. It highlights the difficulty of predicting the flare strength and CME speed a priori from the pre-flare magnetograms used in flare prediction models. Although the total, potential magnetic energy proxies show weak positive correlation, the decrease in free energy exhibits higher correlation (0.56) with the flare strength and CME speed. Moreover, the eruptive flares have threshold of SGPIL length (31Mm), R value ($1.6\times10^{19}$Mx), free-energy decrease ($2\times10^{31}$erg) compared to confined ones. In 90\% eruptive flares, the decay-index curve is steeper reaching $n_{crit}=1.5$ within 42Mm, whereas it is beyond 42Mm in $>70$% confined flares. While indicating the improved statistics in the predictive capability of the AR eruptive behavior with the flare-ribbon information, our study provides threshold magnetic properties for a flare to be eruptive.

We study the magnetic structure of successively erupting sigmoid in active region 12371 by modeling the quasi-static coronal field evolution with non-linear force-free field (NLFFF) equilibria. HMI/SDO vector magnetograms are used as input to the NLFFF model. In all eruption events, the modeled structure resembles the observed pre-eruptive coronal sigmoid and the NLFFF core-field is a combination of double inverse J-shaped and inverse-S field-lines with dips touching the photosphere. Such field-lines are formed by flux-cancellation reconnection of opposite-J field-lines at bald-patch locations. It implies the formation of a weakly twisted flux-rope from large scale sheared arcade field lines. Later on, this flux-rope undergo coronal tether-cutting reconnection until a CME is triggered. The modeled structure captured these major features of sigmoid-to-arcade-to-sigmoid transformation, that is being recurrent under continuous photospheric flux motions. Calculations of the field-line twist reveal a fractional increase followed by a decrease of the number of pixels having a range of twist. This traces the buildup process of a twisted core-field by slow photospheric motions and the relaxation after eruption, respectively. Our study infers that the large eruptivity of this AR is due to a steep decrease of the background coronal field meeting the torus instability criteria at low height ($\approx 40$ Mm) in contrast to non-eruptive ARs.

We study the triggering mechanism of a limb-prominence eruption and the associated coronal mass ejection near AR 12342 using SDO and LASCO/SOHO observations. The prominence is seen with an embedded flux thread (FT) at one end and bifurcates from the middle to a different footpoint location. The morphological evolution of the FT is similar to an unstable flux rope (FR), which we regard as prominence embedded FR. The FR twist exceeds the critical value. In addition, the morphology of the prominence plasma in 304\AA~images marks the helical nature of the magnetic skeleton with a total of 2.96 turns along arc length. The potential field extrapolation model indicates that the critical height of the background magnetic field gradient falls within the inner corona (105Mm) consistent with the extent of coronal plasma loops. These results suggest that the helical kink instability in the embedded FR caused the slow rise of the prominence to a height of the torus instability domain. Moreover, the differential emission measure analysis unveils heating of the prominence plasma to coronal temperatures during eruption, suggesting a reconnection-related heating underneath the upward rising embedded FR. The prominence starts with a slow rise motion of 10km/s, followed by fast and slow acceleration phases having an average acceleration of $28.9m/s^2$, $2.4m/s^2$ in C2, C3 field of view respectively. As predicted by previous numerical simulations, the observed synchronous kinematic profiles of the CME leading edge and the core supports the involved FR instability in the prominence initiation.

We study magnetic field evolution in AR12371 relating its successive eruptive nature. During the disk transit of seven days, the AR launched four sequential fast coronal mass ejections (CMEs) associated with long duration M-class flares. Morphological study delineates a pre-eruptive coronal sigmoid structure above the polarity inversion line (PIL) similar to Moore et al study. Velocity field derived from tracked magnetograms indicates persistent shear and converging motions of polarity regions about the PIL. While these shear motions continue, the crossed arms of two sigmoid elbows are being brought to interaction by converging motions at the middle of PIL, initiating tether-cutting reconnection of field lines and the onset of CME explosion. The successive CMEs are explained by a cyclic process of magnetic energy storage and release terming "sigmoid-to-arcade-to-sigmoid" transformation driven by photospheric flux motions. Further, the continued shear motions inject helicity flux of dominant negative sign, which contributes to core field twist and its energy by building a twisted flux rope (FR). After a limiting value, the excess coronal helicity is expelled by bodily ejection of the FR initiated by some instability as realized by intermittent CMEs. This AR is in contrast to the confined AR12192 with predominant negative signed larger helicity flux but very weaker (-0.02turns) normalised coronal helicity content. While predominant signed helicity flux is a requirement for CME eruption, our study suggests the magnetic flux normalized helicity flux as a necessary condition accommodating the role of background flux and appeals a further study of large sample of ARs.

Understanding the nature and evolution of the photospheric helicity flux transfer is a key to reveal the role of magnetic helicity in coronal dynamics of solar active regions. Using SDO/HMI photospheric vector magnetograms and the derived flow velocity field, we computed boundary driven helicity flux with a 12 minute cadence during the emergence of AR 11928. Accounting the foot point connectivity defined by non-linear force-free magnetic extrapolations, we derived and analyzed the corrected distribution of helicity flux maps. The photospheric helicity flux injection is found to changes sign during the steady emergence of the AR. This reversal is confirmed with the evolution of the photospheric electric currents and with the coronal connectivity as observed in EUV wavelengths with SDO/AIA. During about the three first days of emergence, the AR coronal helicity is positive while later on the field configuration is close to a potential field. As theoretically expected, the magnetic helicity cancelation is associated to enhanced coronal activity. The study suggests a boundary driven transformation of the chirality in the global AR magnetic structure. This may be the result of the emergence of a flux rope with positive twist around its apex while it has negative twist in its legs. The origin of such mixed helicity flux rope in the convective zone is challenging for models.

We studied the developing conditions of sigmoid structure under the influence of magnetic non-potential characteristics of a rotating sunspot in the active region (AR) 12158. Vector magnetic field measurements from Helioseismic Magnetic Imager and coronal EUV observations from Atmospheric Imaging Assembly reveal that the erupting inverse-S sigmoid had roots in the location of the rotating sunspot. Sunspot rotates at a rate of 0-5deg/h with increasing trend in the first half followed by a decrease. Time evolution of many non-potential parameters had a well correspondence with the sunspot rotation. The evolution of the AR magnetic structure is approximated by a time series of force free equilibria. The NLFFF magnetic structure around the sunspot manifests the observed sigmoid structure. Field lines from the sunspot periphery constitute the body of the sigmoid and those from interior overly the sigmoid similar to a fluxrope structure. While the sunspot is being rotating, two major CME eruptions occurred in the AR. During the first (second) event, the coronal current concentrations enhanced (degraded) consistent with the photospheric net vertical current, however the magnetic energy is released during both the cases. The analysis results suggest that the magnetic connections of the sigmoid are driven by slow motion of sunspot rotation, which transforms to a highly twisted flux rope structure in a dynamical scenario. An exceeding critical twist in the flux rope probably leads to the loss of equilibrium and thus triggering the onset of two eruptions.

In the context of Sun-Earth connection of coronal mass ejections and magnetic flux ropes (MFRs), we studied the solar active region (AR) and the magnetic properties of magnetic cloud (MC) event during April 14-15, 2013. We use in-situ observations from the Advanced Composition Explorer and source AR measurements from the Solar Dynamic Observatory. The MCs magnetic structure is reconstructed from the Grad-Shafranov method which reveals a northern component of the axial field with left-handed helicity. The MC invariant axis is highly inclined to the ecliptic plane pointing northward and is rotated by $117^o$ with respect to the source region PIL. The net axial flux and current in the MC are comparatively higher than from the source region. Linear force-free alpha distribution ($10^{-7}-10^{-6}$ m$^{-1}$) at the sigmoid leg matches the range of twist number in the MC of 1-2 AU MFR. The MFR is non-linear force-free with decreasing twist from the axis (9 turns/AU) towards the edge. Therefore Gold-Hoyle (GH) configuration, assuming a constant twist, is more consistent with the MC structure than the Lundquist configuration of increasing twist from the axis to boundary. As an indication to that, the GH configuration yields better fitting to the global trend of in-situ magnetic field components, in terms of rms, than the Lundquist model. These cylindrical configurations improved the MC fitting results when considered the effect of self-similar expansion of MFR. For such twisting behaviour, this study suggests an alternative fitting procedure to better characterise the MC magnetic structure and its source region links.

We present an investigation of an eruption event of coronal mass ejection (CME) magnetic flux rope (MFR) from source active region (AR) NOAA 11719 on 11 April 2013 utilizing observations from SDO, STEREO, SOHO, and WIND spacecraft. The source AR consists of pre-existing sigmoidal structure stacked over a filament channel which is regarded as MFR system. EUV observations of low corona suggest a further development of this MFR system by added axial flux through tether-cutting reconnection of loops at the middle of sigmoid under the influence of continuous slow flux motions during past two days. Our study implies that the MFR system in the AR is initiated to upward motion by kink-instability and further driven by torus-instability. The CME morphology, captured in simultaneous three-point coronagraph observations, is fitted with Graduated Cylindrical Shell (GCS) model and discerns an MFR topology with orientation aligning with magnetic neutral line in the source AR. This MFR expands self-similarly and is found to have source AR twist signatures in the associated near Earth magnetic cloud (MC). We further derived kinematics of this CME propagation by employing a plethora of stereoscopic as well as single spacecraft reconstruction techniques. While stereoscopic methods perform relatively poorly compared to other methods, fitting methods worked best in estimating the arrival time of the CME compared to in-situ measurements. Supplied with values of constrained solar wind velocity, drag parameter and 3D kinematics from GCS fit, we construct CME kinematics from the drag based model consistent with in-situ MC arrival.

We present a detailed investigation on the evolution of observed net vertical current using a time series of vector magnetograms of the active region (AR) NOAA 11158 obtained from Helioseismic Magnetic Imager. We also discuss the relation of net current to the observed eruptive events. The AR evolved from $\beta\gamma$ to $\beta\gamma\delta$ configuration over a period of 6 days. The AR had two sub-regions of activity with opposite chirality: one dominated by sunspot rotation producing a strong CME, the other showing large shear motions producing a strong flare. The net current in each polarity over the CME producing sub-region increased to a maximum and then decreased when the sunspots got separated. The time profile of net current in this sub-region followed the time profile of the rotation rate of the S-polarity sunspot of the same sub-region. The net current in the flaring sub-region showed a sudden increase at the time of the strong flare and remained unchanged till the end of the observation, while the sunspots maintained their close proximity. The systematic evolution of the observed net current is seen to follow the time evolution of total length of strongly sheared polarity inversion lines in both the sub-regions. The observed photospheric net current could be explained as an inevitable product of the emergence of a twisted flux rope, from a higher pressure confinement below the photosphere into the lower pressure environment of the photosphere.

An eruption event launched from solar active region (AR) NOAA 11719 is investigated based on coronal EUV observations and photospheric magnetic field measurements obtained from Solar Dynamic Observatory. The AR consists of a filament channel originating from major sunspot and its south section is associated with inverse-S sigmoidal system as observed in AIA passbands. We regard the sigmoid as the main body of the flux rope (FR). There also exists a twisted flux bundle crossing over this FR. This overlying flux bundle transforms in shape similar to kink-rise evolution which has correspondence with rise motion of the FR. The emission measure and temperature along the FR exhibits increasing trend with its rising motion, indicating reconnection in the thinning current sheet underneath the FR. Net magnetic flux of the AR evaluated at north and south polarities showed decreasing behavior whereas the net current in these fluxes exhibits increasing trend. As the negative (positive) flux is having dominant positive (negative) current, the chirality of AR flux system is likely negative (left handed) to be consistent with the chirality of inverse S-sigmoidal FR. This analysis of magnetic fields of source AR suggest that the cancelling fluxes are prime factors to the monotonous twisting of the FR system reaching to a critical state to trigger kink instability and the rise motion. This rise motion possibly led to onset of torus instability resulting in Earth-directed CME and the progressive reconnection in thinning current sheet underneath the rising FR leads to M6.5 flare.

We study the quasi-static evolution of coronal magnetic fields constructed from the Non Linear Force Free Field (NLFFF) approximation aiming to understand the relation between the magnetic field topology and ribbon emission during an X1.5 flare in active region (AR) NOAA 11166. The flare with a quasi-elliptical, and two remote ribbons occurred on March 9, 2011 at 23:13UT over a positive flux region surrounded by negative flux at the center of the bipolar AR. Our analysis of the coronal magnetic structure with potential and NLFFF solutions unveiled the existence of a single magnetic null point associated with a fan-spine topology and is co-spatial with the hard X-ray source. The footpoints of the fan separatrix surface agree with the inner edge of the quasi-elliptical ribbon and the outer spine is linked to one of the remote ribbons. During the evolution, the slow footpoint motions stressed the fieldlines along the polarity inversion line and caused electric current layers in the corona around the fan separatrix surface. These current layers trigger magnetic reconnection as a consequence of dissipating currents, which are visible as cusped shape structures at lower heights. The reconnection process reorganised the magnetic field topology whose signatures are observed at the separatrices/QSL structure both in the photosphere and corona during the pre-to-post flare evolution. In agreement with previous numerical studies, our results suggest that the line-tied footpoint motions perturb the fan-spine system and cause null point reconnection, which eventually causes the flare emission at the footpoints of the fieldlines.

Magnetic fields in the solar corona are responsible for a wide range of phenomena. However, any direct measurements of the coronal magnetic fields are very difficult due to lack of suitable spectral lines, weak magnetic fields, and high temperatures. Therefore, one extrapolates photospheric field measurements into the corona. Owing to low coronal plasma $\beta$, we can apply a force-free model in lowest order to study the slow evolution of active region (AR) magnetic fields. On applying these models to AR 11158 and compared with coronal plasma tracers, we found that (1) the approximation of potential field to coronal structures over large length scales is a reasonable one, 2) linear force-free (LFF) assumption to AR coronal fields may not be applicable model as it assumes uniform twist over the entire AR, and 3) for modeling fields at sheared, stressed locations where energy release in the form of flares are usually observed, non-linear force free fields (NLFFF) seem to provide a good approximation. The maximum available free-energy profile shows step-wise decrease that is sufficient to power an M-class flare as observed.

We study the role of rotating sunspots in relation to the evolution of various physical parameters characterizing the non-potentiality of the active region NOAA 11158 and its eruptive events using the magnetic field data from the Helioseismic and Magnetic Imager (HMI) and multi-wavelength observations from the Atmospheric Imaging Assembly (AIA) on board Solar Dynamics Observatory (SDO). From the evolutionary study of HMI intensity and AIA channels, it is observed that the AR consists of two major rotating sunspots one connected to flare-prone region and another with CME. The constructed space-time intensity maps reveal that the sunspots exhibited peak rotation rates coinciding with the occurrence of the major eruptive events. Further, temporal profiles of twist parameters, viz., average shear angle, $\alpha_{\rm av}$, $\alpha_{\rm best}$, derived from HMI vector magnetograms and the rate of helicity injection, obtained from the horizontal flux motions of HMI line-of-sight magnetograms, corresponded well with the rotational profile of the sunspot in CME-prone region, giving predominant evidence of rotational motion to cause magnetic non-potentiality. Moreover, mean value of free-energy from the Virial theorem calculated at the photospheric level shows clear step down decrease at the on set time of the flares revealing unambiguous evidence of energy release, intermittently that is stored by flux emergence and/or motions in pre-flare phases. Additionally, distribution of helicity injection is homogeneous in CME prone region while it is not and often changes sign in flare-prone region. This study provides clear picture that both proper and rotational motions of the observed fluxes played significant role to enhance the magnetic non-potentiality of the AR, leading to favorable conditions for the observed transient activity.

An investigation of helicity injection by photospheric shear motions is carried out for two active regions(ARs), NOAA 11158 and 11166, using line-of-sight magnetic field observations obtained from the Helioseismic and Magnetic Imager on-board Solar Dynamics Observatory. We derived the horizontal velocities in the active regions from the Differential Affine Velocity Estimator(DAVE) technique. Persistent strong shear motions at the maximum velocities in the range of 0.6--0.9km/s along the magnetic polarity inversion line and outward flows from the peripheral regions of the sunspots were observed in the two active regions. The helicities injected in NOAA 11158 and 11166 during their six days' evolution period were estimated as $14.16\times10^{42}$Mx$^2$ and $9.5\times10^{42}$Mx$^2$, respectively. The estimated injection rates decreased up to 13% by increasing the time interval between the magnetograms from 12 min to 36 min, and increased up to 9% by decreasing the DAVE window size from $21\times18$ to $9\times6$ pixel$^2$, resulting in 10% variation in the accumulated helicity. In both ARs, the flare prone regions (R2) had inhomogeneous helicity flux distribution with mixed helicities of both signs and that of CME prone regions had almost homogeneous distribution of helicity flux dominated by single sign. The temporal profiles of helicity injection showed impulsive variations during some flares/CMEs due to negative helicity injection into the dominant region of positive helicity flux. A quantitative analysis reveals a marginally significant association of helicity flux with CMEs but not flares in AR 11158, while for the AR 11166, we found marginally significant association of helicity flux with flares but not CMEs, providing evidences of the role of helicity injection at localized sites of the events.

The first X-class flare of the current solar cycle 24 occurred in Active Region NOAA 11158 during its central meridian passage on 2011 February 15. This two ribbon white-light flare was well observed by the Helioseismic and Magnetic Imager (HMI) on board Solar Dynamics Observatory (SDO). During the peak phase of the flare, we detected magnetic and Doppler velocity transients appearing near the umbral boundary of the main sunspot. These transients persisted for a few minutes and showed spatial and temporal correspondence with the flare kernels. The observed magnetic polarity at the transients' locations underwent sign reversal, together with large enhancement in Doppler velocities. We explain this observational phenomena using the HMI spectral data obtained before, during and after the flare. These changes were reflected in the maps of the AR in all the Stokes parameters. Association of the transient features with various signatures of the flare and the cause and effects of their appearance are also presented on the basis of present theoretical models.

We present multi-wavelength analysis of an eruption event that occurred in Active Region (AR) NOAA 11093 on 7 August 2010, using data obtained from SDO, STEREO, RHESSI and GONG H$\alpha$ network telescope. From these observations, we inferred that upward slow rising motion of an inverse S-shaped filament lying along the polarity inversion line (PIL) resulted in a CME subsequent to a two-ribbon flare. Interaction of overlying field line across the filament with side lobe field lines, associated EUV brightening, and flux emergence/cancellation around the filament were the observational signatures of the processes leading to its destabilization and the onset of eruption. Moreover, the rising motion profile of filament/flux rope corresponded well with flare characteristics, viz., the reconnection rate and HXR emission profiles. Flux rope accelerated to the maximum velocities as a CME at the peak phase of the flare, followed by deceleration to an average velocity of 590 kms$^{-1}$. We suggest that the observed emergence/cancellation of magnetic fluxes near the filament caused it to rise, resulting in the tethers to cut and reconnection to take place beneath the filament; in agreement with the tether cutting model. The corresponding increase/decrease in positive/negative photospheric fluxes found in the post-peak phase of the eruption provides unambiguous evidence of reconnection as a consequence of tether cutting.