When two galaxy clusters encounter each other, the interaction results in a collisionless shock that is characterized by a low (1-4) sonic Mach number, and a high Alfv{\'e}nic Mach number. Our goal is to determine if, and to what extent, such shocks can accelerate particles to sufficient velocities that they can contribute to the cosmic ray spectrum. We combine two different computational methods, magnetohydrodynamics (MHD) and particle-in-cell (PIC) into a single code that allows us to take advantage of the high computational efficiency of MHD while maintaining the ability to model the behaviour of individual non-thermal particles. Using this method, we perform a series of simulations covering the expected parameter space of galaxy cluster collision shocks. Our results show that for shocks with a sonic Mach number below 2.25 no diffusive shock acceleration can take place because of a lack of instabilities in the magnetic field, whereas for shocks with a sonic Mach number $\geq\,3$ the acceleration is efficient and can accelerate particles to relativistic speeds. In the regime between these two extremes, diffusive shock acceleration can occur but is relatively inefficient because of the time- and space-dependent nature of the instabilities. For those shocks that show efficient acceleration, the instabilities in the upstream gas increase to the point where they change the nature of the shock, which, in turn, will influence the particle injection process.

We use particle-in-magnetohydrodynamics-cells to model particle acceleration and magnetic field amplification in a high Mach, parallel shock in three dimensions and compare the result to 2-D models. This allows us to determine whether 2-D simulations can be relied upon to yield accurate results in terms of particle acceleration, magnetic field amplification and the growth rate of instabilities. Our simulations show that the behaviour of the gas and the evolution of the instabilities are qualitatively similar for both the 2-D and 3-D models, with only minor quantitative differences that relate primarily to the growth speed of the instabilities. The main difference between 2-D and 3-D models can be found in the spectral energy distributions (SEDs) of the non-thermal particles. The 2-D simulations prove to be more efficient, accelerating a larger fraction of the particles and achieving higher velocities. We conclude that, while 2-D models are sufficient to investigate the instabilities in the gas, their results have to be treated with some caution when predicting the expected SED of a given shock.

The material lost through stellar winds of Asymptotic Giant Branch (AGB) stars is one of the main contributors to the chemical enrichment of galaxies. The general hypothesis of the mass loss mechanism of AGB winds is a combination of stellar pulsations and radiative pressure on dust grains, yet current models still suffer from limitations. Among others, they assume chemical equilibrium of the gas, which may not be justified due to rapid local dynamical changes in the wind. This is important as it is the chemical composition that regulates the thermal structure of the wind, the creation of dust grains in the wind, and ultimately the mass loss by the wind. Using a self-consistent hydrochemical model, we investigated how non-equilibrium chemistry affects the dynamics of the wind. This paper compares a hydrodynamical and a hydrochemical dust-free wind, with focus on the chemical heating and cooling processes. No sustainable wind arises in a purely hydrodynamical model with physically reasonable pulsations. Moreover, temperatures are too high for dust formation to happen, rendering radiative pressure on grains impossible. A hydrochemical wind is even harder to initiate due to efficient chemical cooling. However, temperatures are sufficiently low in dense regions for dust formation to take place. These regions occur close to the star, which is needed for radiation pressure on dust to sufficiently aid in creating a wind. Extending this model self-consistently with dust formation and evolution, and including radiation pressure, will help to understand the mass loss by AGB winds.

Collisionless shocks with low sonic Mach numbers, $M_{\rm s} \lesssim 4$, are expected to accelerate cosmic ray (CR) protons via diffusive shock acceleration (DSA) in the intracluster medium (ICM). However, observational evidence for CR protons in the ICM has yet to be established. Performing particle-in-cell simulations, we study the injection of protons into DSA and the early development of a nonthermal particle population in weak shocks in high $\beta$ ($\approx 100$) plasmas. Reflection of incident protons, self-excitation of plasma waves via CR-driven instabilities, and multiple cycles of shock drift acceleration are essential to the early acceleration of CR protons in supercritical quasi-parallel shocks. We find that only in ICM shocks with $M_{\rm s} \gtrsim M_{\rm s}^*\approx 2.25$, a sufficient fraction of incoming protons are reflected by the overshoot in the shock electric potential and magnetic mirror at locally perpendicular magnetic fields, leading to efficient excitation of magnetic waves via CR streaming instabilities and the injection into the DSA process. Since a significant fraction of ICM shocks have $M_{\rm s} < M_{\rm s}^*$, CR proton acceleration in the ICM might be less efficient than previously expected. This may explain why the diffuse gamma-ray emission from galaxy clusters due to proton-proton collisions has not been detected so far.

We present simulations of magnetized astrophysical shocks taking into account the interplay between the thermal plasma of the shock and supra-thermal particles. Such interaction is depicted by combining a grid-based magneto-hydrodynamics description of the thermal fluid with particle in cell techniques devoted to the dynamics of supra-thermal particles. This approach, which incorporates the use of adaptive mesh refinement features, is potentially a key to simulate astrophysical systems on spatial scales that are beyond the reach of pure particle-in-cell simulations. We consider in this study non-relativistic shocks with various Alfvenic Mach numbers and magnetic field obliquity. We recover all the features of both magnetic field amplification and particle acceleration from previous studies when the magnetic field is parallel to the normal to the shock. In contrast with previous particle-in-cell-hybrid simulations, we find that particle acceleration and magnetic field amplification also occur when the magnetic field is oblique to the normal to the shock but on larger timescales than in the parallel case. We show that in our simulations, the supra-thermal particles are experiencing acceleration thanks to a pre-heating process of the particle similar to a shock drift acceleration leading to the corrugation of the shock front. Such oscillations of the shock front and the magnetic field locally help the particles to enter the upstream region and to initiate a non-resonant streaming instability and finally to induce diffuse particle acceleration.

The Wolf-Rayet 98a (WR 98a) system is a prime target for interferometric surveys, since its identification as a "rotating pinwheel nebulae", where infrared images display a spiral dust lane revolving with a 1.4 year periodicity. WR 98a hosts a WC9+OB star, and the presence of dust is puzzling given the extreme luminosities of Wolf-Rayet stars. We present 3D hydrodynamic models for WR 98a, where dust creation and redistribution are self-consistently incorporated. Our grid-adaptive simulations resolve details in the wind collision region at scales below one percent of the orbital separation (~4 AU), while simulating up to 1300 AU. We cover several orbital periods under conditions where the gas component alone behaves adiabatic, or is subject to effective radiative cooling. In the adiabatic case, mixing between stellar winds is effective in a well-defined spiral pattern, where optimal conditions for dust creation are met. When radiative cooling is incorporated, the interaction gets dominated by thermal instabilities along the wind collision region, and dust concentrates in clumps and filaments in a volume-filling fashion, so WR 98a must obey close to adiabatic evolutions to demonstrate the rotating pinwheel structure. We mimic Keck, ALMA or future E-ELT observations and confront photometric long-term monitoring. We predict an asymmetry in the dust distribution between leading and trailing edge of the spiral, show that ALMA and E-ELT would be able to detect fine-structure in the spiral indicative of Kelvin-Helmholtz development, and confirm the variation in photometry due to the orientation. Historic Keck images are reproduced, but their resolution is insufficient to detect the details we predict.

Massive stars that have been ejected from their parent cluster and supersonically sailing away through the interstellar medium (ISM) are classified as exiled. They generate circumstellar bow shock nebulae that can be observed. We present two-dimensional, axisymmetric hydrodynamical simulations of a representative sample of stellar wind bow shocks from Galactic OB stars in an ambient medium of densities ranging from n_ISM=0.01 up to 10.0/cm3. Independently of their location in the Galaxy, we confirm that the infrared is the most appropriated waveband to search for bow shocks from massive stars. Their spectral energy distribution is the convenient tool to analyze them since their emission does not depend on the temporary effects which could affect unstable, thin-shelled bow shocks. Our numerical models of Galactic bow shocks generated by high-mass (~40 Mo) runaway stars yield H$\alpha$ fluxes which could be observed by facilities such as the SuperCOSMOS H-Alpha Survey. The brightest bow shock nebulae are produced in the denser regions of the ISM. We predict that bow shocks in the field observed at Ha by means of Rayleigh-sensitive facilities are formed around stars of initial mass larger than about 20 Mo. Our models of bow shocks from OB stars have the emission maximum in the wavelength range 3 <= lambda <= 50 micrometer which can be up to several orders of magnitude brighter than the runaway stars themselves, particularly for stars of initial mass larger than 20 Mo.

The winds of massive stars create large (>10 pc) bubbles around their progenitors. As these bubbles expand they encounter the interstellar coherent magnetic field which, depending on its strength, can influence the shape of the bubble. We wish to investigate if, and how much, the interstellar magnetic field can contribute to the shape of an expanding circumstellar bubble around a massive star. We use the MPI-AMRVAC code to make magneto-hydrodynamical simulations of bubbles, using a single star model, combined with several different field strengths: B = 5, 10, and 20 muG for the interstellar magnetic field. This covers the typical field strengths of the interstellar magnetic fields found in the galactic disk and bulge. Furthermore, we present two simulations that include both a 5 muG interstellar magnetic field and a 10,000 K interstellar medium and two different ISM densities to demonstrate how the magnetic field can combine with other external factors to influence the morphology of the circumstellar bubbles. Our results show that low magnetic fields, as found in the galactic disk, inhibit the growth of the circumstellar bubbles in the direction perpendicular to the field. As a result, the bubbles become ovoid, rather than spherical. Strong interstellar fields, such as observed for the galactic bulge, can completely stop the expansion of the bubble in the direction perpendicular to the field, leading to the formation of a tube-like bubble. When combined with a warm, high-density ISM the bubble is greatly reduced in size, causing a dramatic change in the evolution of temporary features inside the bubble. The magnetic field of the interstellar medium can affect the shape of circumstellar bubbles. This effect may have consequences for the shape and evolution of circumstellar nebulae and supernova remnants, which are formed within the main wind-blown bubble.

Recent high-resolution observations have shown stellar winds to harbour complexities which strongly deviate from spherical symmetry, generally assumed as standard wind model. One such morphology is the archimedean spiral, generally believed to be formed by binary interactions, which has been directly observed in multiple sources. We seek to investigate the manifestation in the observables of spiral structures embedded in the spherical outflows of cool stars. We aim to provide an intuitive bedrock with which upcoming ALMA data can be compared and interpreted. By means of an extended parameter study, we model rotational CO emission from the stellar outflow of asymptotic giant branch stars. To this end, we develop a simplified analytical parametrised description of a 3D spiral structure. This model is embedded into a spherical wind, and fed into the 3D radiative transfer code LIME, which produces 3D intensity maps throughout velocity space. Subsequently, we investigate the spectral signature of rotational transitions of CO of the models, as well as the spatial aspect of this emission by means of wide-slit PV diagrams. Additionally, the potential for misinterpretation of the 3D data in a 1D context is quantified. Finally, we simulate ALMA observations to explore the impact of interefrometric noise and artifacts on the emission signatures. The spectral signatures of the CO rotational transition v=0 J=3-2 are very efficient at concealing the dual nature of the outflow. Only a select few parameter combinations allow for the spectral lines to disclose the presence of the spiral structure. The inability to disentangle the spiral from the spherical signal can result in an incorrect interpretation in a 1D context. Consequently, erroneous mass loss rates would be calculated...

We aim to examine the role of the interstellar magnetic field in shaping the extended morphologies of slow dusty winds of Asymptotic Giant-branch (AGB) stars in an effort to pin-point the origin of so-called eye shaped CSE of three carbon-rich AGB stars. In addition, we seek to understand if this pre-planetary nebula (PN) shaping can be responsible for asymmetries observed in PNe. Hydrodynamical simulations are used to study the effect of typical interstellar magnetic fields on the free-expanding spherical stellar winds as they sweep up the local interstellar medium (ISM). The simulations show that typical Galactic interstellar magnetic fields of 5 to 10 muG, are sufficient to alter the spherical expanding shells of AGB stars to appear as the characteristic eye shape revealed by far-infrared observations. The typical sizes of the simulated eyes are in accordance with the observed physical sizes. However, the eye shapes are of transient nature. Depending on the stellar and interstellar conditions they develop after 20,000 to 200,000yrs and last for about 50,000 to 500,000 yrs, assuming that the star is at rest relative to the local interstellar medium. Once formed the eye shape will develop lateral outflows parallel to the magnetic field. The "explosion" of a PN in the center of the eye-shaped dust shell gives rise to an asymmetrical nebula with prominent inward pointing Rayleigh-Taylor instabilities. Interstellar magnetic fields can clearly affect the shaping of wind-ISM interaction shells. The occurrence of the eyes is most strongly influenced by stellar space motion and ISM density. Observability of this transient phase is favoured for lines-of-sight perpendicular to the interstellar magnetic field direction. The simulations indicate that shaping of the pre-PN envelope can strongly affect the shape and size of PNe.

Many massive stars travel through the interstellar medium at supersonic speeds. As a result they form bow shocks at the interface between the stellar wind. We use numerical hydrodynamics to reproduce such bow shocks numerically, creating models that can be compared to observations. In this paper we discuss the influence of two physical phenomena, interstellar magnetic fields and the presence of interstellar dust grains on the observable shape of the bow shocks of massive stars. We find that the interstellar magnetic field, though too weak to restrict the general shape of the bow shock, reduces the size of the instabilities that would otherwise be observed in the bow shock of a red supergiant. The interstellar dust grains, due to their inertia can penetrate deep into the bow shock structure of a main sequence O-supergiant, crossing over from the ISM into the stellar wind. Therefore, the dust distribution may not always reflect the morphology of the gas. This is an important consideration for infrared observations, which are dominated by dust emission. Our models clearly show, that the bow shocks of massive stars are useful diagnostic tools that can used to investigate the properties of both the stellar wind as well as the interstellar medium.

Many evolved stars travel through space at supersonic velocities, which leads to the formation of bow shocks ahead of the star where the stellar wind collides with the interstellar medium (ISM). Herschel observations of the bow shock of $\alpha$-Orionis show that the shock is almost free of instabilities, despite being, at least in theory, subject to both Kelvin-Helmholtz and Rayleigh-Taylor instabilities. A possible explanation for the lack of instabilities lies in the presence of an interstellar magnetic field. We wish to investigate whether the magnetic field of the interstellar medium (ISM) in the Orion arm can inhibit the growth of instabilities in the bow shock of $\alpha$-Orionis. We used the code MPI-AMRVAC to make magneto-hydrodynamic simulations of a circumstellar bow shock, using the wind parameters derived for $\alpha$-Orionis and interstellar magnetic field strengths of $B\,=\,1.4,\, 3.0$, and $5.0\, \mu$G, which fall within the boundaries of the observed magnetic field strength in the Orion arm of the Milky Way. Our results show that even a relatively weak magnetic field in the interstellar medium can suppress the growth of Rayleigh-Taylor and Kelvin-Helmholtz instabilities, which occur along the contact discontinuity between the shocked wind and the shocked ISM. The presence of even a weak magnetic field in the ISM effectively inhibits the growth of instabilities in the bow shock. This may explain the absence of such instabilities in the Herschel observations of $\alpha$-Orionis.

The unparalleled photometric data obtained by NASA's Kepler space telescope led to an improved understanding of red giant stars and binary stars. Seismology allows us to constrain the properties of red giants. In addition to eclipsing binaries, eccentric non-eclipsing binaries, exhibiting ellipsoidal modulations, have been detected with Kepler. We aim to study the properties of eccentric binary systems containing a red giant star and derive the parameters of the primary giant component. We apply asteroseismic techniques to determine masses and radii of the primary component of each system. For a selected target, light and radial velocity curve modelling techniques are applied to extract the parameters of the system. The effects of stellar on the binary system are studied. The paper presents the asteroseismic analysis of 18 pulsating red giants in eccentric binary systems, for which masses and radii were constrained. The orbital periods of these systems range from 20 to 440days. From radial velocity measurements we find eccentricities between e=0.2 to 0.76. As a case study we present a detailed analysis of KIC5006817. From seismology we constrain the rotational period of the envelope to be at least 165 d, roughly twice the orbital period. The stellar core rotates 13 times faster than the surface. From the spectrum and radial velocities we expect that the Doppler beaming signal should have a maximum amplitude of 300ppm in the light curve. Through binary modelling, we determine the mass of the secondary component to be 0.29$\pm$0.03\,$M_\odot$. For KIC5006817 we exclude pseudo-synchronous rotation of the red giant with the orbit. The comparison of the results from seismology and modelling of the light curve shows a possible alignment of the rotational and orbital axis at the 2$\sigma$ level. Red giant eccentric systems could be progenitors of cataclysmic variables and hot subdwarf B stars.

Context. The interaction between stellar winds and the interstellar medium (ISM) can create complex bow shocks. The photometers on board the Herschel Space Observatory are ideally suited to studying the morphologies of these bow shocks. Aims. We aim to study the circumstellar environment and wind-ISM interaction of the nearest red supergiant, Betelgeuse. Methods. Herschel PACS images at 70, 100, and 160 micron and SPIRE images at 250, 350, and 500 micron were obtained by scanning the region around Betelgeuse. These data were complemented with ultraviolet GALEX data, near-infrared WISE data, and radio 21 cm GALFA-HI data. The observational properties of the bow shock structure were deduced from the data and compared with hydrodynamical simulations. Results. The infrared Herschel images of the environment around Betelgeuse are spectacular, showing the occurrence of multiple arcs at 6-7 arcmin from the central target and the presence of a linear bar at 9 arcmin. Remarkably, no large-scale instabilities are seen in the outer arcs and linear bar. The dust temperature in the outer arcs varies between 40 and 140 K, with the linear bar having the same colour temperature as the arcs. The inner envelope shows clear evidence of a non-homogeneous clumpy structure (beyond 15 arcsec), probably related to the giant convection cells of the outer atmosphere. The non-homogeneous distribution of the material even persists until the collision with the ISM. A strong variation in brightness of the inner clumps at a radius of 2 arcmin suggests a drastic change in mean gas and dust density some 32 000 yr ago. Using hydrodynamical simulations, we try to explain the observed morphology of the bow shock around Betelgeuse. Conclusions: [abbreviated]

Massive stars shape their surrounding medium through the force of their stellar winds, which collide with the circumstellar medium. Because the characteristics of these stellar winds vary over the course of the evolution of the star, the circumstellar matter becomes a reflection of the stellar evolution and can be used to determine the characteristics of the progenitor star. In particular, whenever a fast wind phase follows a slow wind phase, the fast wind sweeps up its predecessor in a shell, which is observed as a circumstellar nebula. We make 2-D and 3-D numerical simulations of fast stellar winds sweeping up their slow predecessors to investigate whether numerical models of these shells have to be 3-D, or whether 2-D models are sufficient to reproduce the shells correctly. We focus on those situations where a fast Wolf-Rayet (WR) star wind sweeps up the slower wind emitted by its predecessor, being either a red supergiant or a luminous blue variable. As the fast WR wind expands, it creates a dense shell of swept up material that expands outward, driven by the high pressure of the shocked WR wind. These shells are subject to a fair variety of hydrodynamic-radiative instabilities. If the WR wind is expanding into the wind of a luminous blue variable phase, the instabilities will tend to form a fairly small-scale, regular filamentary lattice with thin filaments connecting knotty features. If the WR wind is sweeping up a red supergiant wind, the instabilities will form larger interconnected structures with less regularity. Our results show that 3-D models, when translated to observed morphologies, give realistic results that can be compared directly to observations. The 3-D structure of the nebula will help to distinguish different progenitor scenarios.

Numerical models of the wind-blown bubble of massive stars usually only account for the wind of a single star. However, since massive stars are usually formed in clusters, it would be more realistic to follow the evolution of a bubble created by several stars. We develope a two-dimensional (2D) model of the circumstellar bubble created by two massive stars, a 40 solar mass star and a 25 solar mass star, and follow its evolution. The stars are separated by approximately 16 pc and surrounded by a cold medium with a density of 20 particles per cubic cm. We use the MPI-AMRVAC hydrodynamics code to solve the conservation equations of hydrodynamics on a 2D cylindrical grid using time-dependent models for the wind parameters of the two stars. At the end of the stellar evolution (4.5 and 7.0 million years for the 40 and 25 solar mass stars, respectively), we simulate the supernova explosion of each star. Each star initially creates its own bubble. However, as the bubbles expand they merge, creating a combined, aspherical bubble. The combined bubble evolves over time, influenced by the stellar winds and supernova explosions. The evolution of a wind-blown bubble created by two stars deviates from that of the bubbles around single stars. In particular, once one of the stars has exploded, the bubble is too large for the wind of the remaining star to maintain and the outer shell starts to disintegrate. The lack of thermal pressure inside the bubble also changes the behavior of circumstellar features close to the remaining star. The supernovae are contained inside the bubble, which reflects part of the energy back into the circumstellar medium.

Far-infrared Herschel/PACS images at 70 and 160 micron of a sample of 78 Galactic evolved stars are used to study the (dust) emission structures, originating from stellar wind-ISM interaction. In addition, two-fluid hydrodynamical simulations of the coupled gas and dust in wind-ISM interactions are used to compare with the observations. Four distinct classes of wind-ISM interaction (i.e. "fermata", "eyes", "irregular", and "rings") are identified and basic parameters affecting the morphology are discussed. We detect bow shocks for ~40% of the sample and detached rings for ~20%. De-projected stand-off distances (R_0) -- defined as the distance between the central star and the nearest point of the interaction region -- of the detected bow shocks ("fermata" and "eyes") are derived from the PACS images and compared to previous results, model predictions and the simulations. All observed bow shocks have stand-off distances smaller than 1 pc. Observed and theoretical stand-off distances are used together to independently derive the local ISM density. Both theoretical (analytical) models and hydrodynamical simulations give stand-off distances for adopted stellar properties that are in good agreement with the measured de-projected stand-off distance of wind-ISM bow shocks. The possible detection of a bow shock -- for the distance limited sample -- appears to be governed by its physical size as set roughly by the stand-off distance. In particular the star's peculiar space velocity and the density of the ISM appear decisive in detecting emission from bow shocks or detached rings. Tentatively, the "eyes" class objects are associated to (visual) binaries, while the "rings" generally appear not to occur for M-type stars, only for C or S-type objects that have experienced a thermal pulse.

Massive stars lose a large fraction of their original mass over the course of their evolution. These stellar winds shape the surrounding medium according to parameters that are the result of the characteristics of the stars, varying over time as the stars evolve, leading to both permanent and temporary features that can be used to constrain the evolution of the progenitor star. Because long Gamma-Ray Bursts (GRBs) are thought to originate from massive stars, the characteristics of the circumstellar medium (CSM) should be observable in the signal of GRBs. This can occur directly, as the characteristics of the GRB-jet are changed by the medium it collides with, and indirectly because the GRB can only be observed through the extended circumstellar bubble that surrounds each massive star. We use computer simulations to describe the circumstellar features that can be found in the vicinity of massive stars and discuss if, and how, they may appear in GRB observations. Specifically, we make hydrodynamical models of the circumstellar environment of a rapidly rotating, chemically near-homogeneous star, which is represents a GRB progenitor candidate model. The simulations show that the star creates a large scale bubble of shocked wind material, which sweeps up the interstellar medium in an expanding shell. Within this bubble, temporary circumstellar shells, clumps and voids are created as a result of changes in the stellar wind. Most of these temporary features have disappeared by the time the star reaches the end of its life, leaving a highly turbulent circumstellar bubble behind. Placing the same star in a high density environment simplifies the evolution of the CSM as the more confined bubble prohibits the formation of some of the temporary structures.

We present numerical simulations of the hydrodynamical interactions that produce circumstellar shells. These simulations include several scenarios, such as wind-wind interaction and wind-ISM collisions. In our calculations we have taken into account the presence of dust in the stellar wind. Our results show that, while small dust grains tend to be strongly coupled to the gas, large dust grains are only weakly coupled. As a result, the distribution of the large dust grains is not representative of the gas distribution. Combining these results with observations may give us a new way of validating hydrodynamical models of the circumstellar medium.

It has been established that cold plasma condensations can form in a magnetic loop subject to localized heating of the footpoints. In this paper, we use grid-adaptive numerical simulations of the radiative hydrodynamic equations to parametrically investigate the filament formation process in a pre-shaped loop with both steady and finite-time chromospheric heating. Compared to previous works, we consider low-lying loops with shallow dips, and use a more realistic description for the radiative losses. We demonstrate for the first time that the onset of thermal instability satisfies the linear instability criterion. The onset time of the condensation is roughly \sim 2 hr or more after the localized heating at the footpoint is effective, and the growth rate of the thread length varies from 800 km hr-1 to 4000 km hr-1, depending on the amplitude and the decay length scale characterizing this localized chromospheric heating. We show how single or multiple condensation segments may form in the coronal portion. In the asymmetric heating case, when two segments form, they approach and coalesce, and the coalesced condensation later drains down into the chromosphere. With a steady heating, this process repeats with a periodicity of several hours. While our parametric survey confirms and augments earlier findings, we also point out that steady heating is not necessary to sustain the condensation. Once the condensation is formed, it can keep growing also when the localized heating ceases. Finally, we show that the condensation can survive continuous buffeting by perturbations resulting from the photospheric p-mode waves.

We study the hydrodynamical behavior occurring in the turbulent interaction zone of a fast moving red supergiant star, where the circumstellar and interstellar material collide. In this wind-interstellar medium collision, the familiar bow shock, contact discontinuity, and wind termination shock morphology forms, with localized instability development. Our model includes a detailed treatment of dust grains in the stellar wind, and takes into account the drag forces between dust and gas. The dust is treated as pressureless gas components binned per grainsize, for which we use ten representative grainsize bins. Our simulations allow to deduce how dust grains of varying sizes become distributed throughout the circumstellar medium. We show that smaller dust grains (radius <0.045 micro-meters) tend to be strongly bound to the gas and therefore follow the gas density distribution closely, with intricate finestructure due to essentially hydrodynamical instabilities at the wind-related contact discontinuity. Larger grains which are more resistant to drag forces are shown to have their own unique dust distribution, with progressive deviations from the gas morphology. Specifically, small dust grains stay entirely within the zone bound by shocked wind material. The large grains are capable of leaving the shocked wind layer, and can penetrate into the shocked or even unshocked interstellar medium. Depending on how the number of dust grains varies with grainsize, this should leave a clear imprint in infrared observations of bowshocks of red supergiants and other evolved stars.

As massive stars evolve, their winds change. This causes a series of hydrodynamical interactions in the surrounding medium. Whenever a fast wind follows a slow wind phase, the fast wind sweeps up the slow wind in a shell, which can be observed as a circumstellar nebula. One of the most striking examples of such an interaction is when a massive star changes from a red supergiant into a Wolf-Rayet star. Nebulae resulting from such a transition have been observed around many Wolf-Rayet stars and show detailed, complicated structures owing to local instabilities in the swept-up shells. Shells also form in the case of massive binary stars, where the winds of two stars collide with one another. Along the collision front gas piles up, forming a shell that rotates along with the orbital motion of the binary stars. In this case the shell follows the surface along which the ram pressure of the two colliding winds is in balance. Using the MPI-AMRVAC hydrodynamics code we have made multi-dimensional simulations of these interactions in order to model the formation and evolution of these circumstellar nebulae and explore whether full 3D simulations are necessary to obtain accurate models of such nebulae.

Energy loss through optically thin radiative cooling plays an important part in the evolution of astrophysical gas dynamics and should therefore be considered a necessary element in any numerical simulation. Although the addition of this physical process to the equations of hydrodynamics is straightforward, it does create numerical challenges that have to be overcome in order to ensure the physical correctness of the simulation. First, the cooling has to be treated (semi-)implicitly, owing to the discrepancies between the cooling timescale and the typical timesteps of the simulation. Secondly, because of its dependence on a tabulated cooling curve, the introduction of radiative cooling creates the necessity for an interpolation scheme. In particular, we will argue that the addition of radiative cooling to a numerical simulation creates the need for extremely high resolution, which can only be fully met through the use of adaptive mesh refinement.

We investigate the morphology of the collision front between the stellar winds of binary components in two long-period binary systems, one consisting of a hydrogen rich Wolf-Rayet star (WNL) and an O-star and the other of a Luminous Blue Variable (LBV) and an O-star. Specifically, we follow the development and evolution of instabilities that form in such a shell, if it is sufficiently compressed, due to both the wind interaction and the orbital motion. We use MPI-AMRVAC to time-integrate the equations of hydrodynamics, combined with optically thin radiative cooling, on an adaptive mesh 3D grid. Using parameters for generic binary systems, we simulate the interaction between the winds of the two stars. The WNL+O star binary shows a typical example of an adiabatic wind collision. The resulting shell is thick and smooth, showing no instabilities. On the other hand, the shell created by the collision of the O star wind with the LBV wind, combined with the orbital motion of the binary components, is susceptible to thin shell instabilities, which create a highly structured morphology. We identify the nature of the instabilities as both linear and non-linear thin-shell instabilities, with distinct differences between the leading and the trailing parts of the collision front. We also find that for binaries containing a star with a (relatively) slow wind, the global shape of the shell is determined more by the slow wind velocity and the orbital motion of the binary, than the ram pressure balance between the two winds. The interaction between massive binary winds needs further parametric exploration, to identify the role and dynamical importance of multiple instabilities at the collision front, as shown here for an LBV+O star system.

Recent observations of luminous Type IIn supernovae (SNe) provide compelling evidence that massive circumstellar shells surround their progenitors. In this paper we investigate how the properties of such shells influence the SN lightcurve by conducting numerical simulations of the interaction between an expanding SN and a circumstellar shell ejected a few years prior to core collapse. Our parameter study explores how the emergent luminosity depends on a range of circumstellar shell masses, velocities, geometries, and wind mass-loss rates, as well as variations in the SN mass and energy. We find that the shell mass is the most important parameter, in the sense that higher shell masses (or higher ratios of M_shell/M_SN) lead to higher peak luminosities and higher efficiencies in converting shock energy into visual light. Lower mass shells can also cause high peak luminosities if the shell is slow or if the SN ejecta are very fast, but only for a short time. Sustaining a high luminosity for durations of more than 100 days requires massive circumstellar shells of order 10 M_sun or more. This reaffirms previous comparisons between pre-SN shells and shells produced by giant eruptions of luminous blue variables (LBVs), although the physical mechanism responsible for these outbursts remains uncertain. The lightcurve shape and observed shell velocity can help diagnose the approximate size and density of the circumstellar shell, and it may be possible to distinguish between spherical and bipolar shells with multi-wavelength lightcurves. These models are merely illustrative. One can, of course, achieve even higher luminosities and longer duration light curves from interaction by increasing the explosion energy and shell mass beyond values adopted here.

The properties of a massive star prior to its final explosion are imprinted in the circumstellar medium (CSM) created by its wind and termination shock. We perform a detailed, comprehensive calculation of the time-variable and angle-dependent transmission spectra of an average-luminosity Gamma-Ray Burst (GRB) which explodes in the CSM structure produced by the collapse of a 20 Msun, rapidly rotating, Z=0.001 progenitor star. We study both the case in which metals are initially in the gaseous phase, as well as the situation in which they are heavily depleted into dust. We find that high-velocity lines from low-ionization states of silicon, carbon, and iron are initially present in the spectrum only if the metals are heavily depleted into dust prior to the GRB explosion. However, such lines disappear on timescales of a fraction of a second for a burst observed on-axis, and of a few seconds for a burst seen at high-latitude, making their observation virtually impossible. Rest-frame lines produced in the termination shock are instead clearly visible in all conditions. We conclude that time-resolved, early-time spectroscopy is not a promising way in which the properties of the GRB progenitor wind can be routinely studied. Previous detections of high velocity features in GRB UV spectra must have been due either due to a superposition of a physically unrelated absorber or to a progenitor star with very unusual properties.

There are large differences in the proposed progenitor models for the Cas A SNR. One of these differences is the presence or absence of a Wolf-Rayet (WR) phase of the progenitor star. The mass loss history of the progenitor star strongly affects the shape of the Supernova remnant (SNR). In this paper we investigate whether the progenitor star of Cas A had a WR phase or not and how long it may have lasted. We performed two-dimensional multi-species hydrodynamical simulations of the CSM around the progenitor star for several WR life times, each followed by the interaction of the supernova ejecta with the CSM. We then looked at the influence of the length of the WR phase and compared the results of the simulations with the observations of Cas A. The difference in the structure of the CSM, for models with different WR life times, has a strong impact on the resulting SNR. With an increasing WR life time the reverse shock velocity of the SNR decreases and the range of observed velocities in the shocked material increases. Furthermore, if a WR phase occurs, the remainders of the WR shell will be visible in the resulting SNR. Comparing our results with the observations suggests that the progenitor star of Cas A did not have a WR phase. We also find that the quasi-stationary flocculi (QSF) in Cas A are not consistent with the clumps from a WR shell that have been shocked and accelerated by the interaction with the SN ejecta. We can also conclude that for a SN explosion taking place in a CSM that is shaped by the wind during a short < 15000 yr WR phase, the clumps from the WR shell will be visible inside the SNR.

Stars can produce steady-state winds through radiative driving as long as the mechanical luminosity of the wind does not exceed the radiative luminosity at its base. This upper bound on the mass loss rate is known as the photon-tiring limit. Once above this limit, the radiation field is unable to lift all the material out of the gravitational potential of the star, such that only part of it can escape and reach infinity. The rest stalls and falls back toward the stellar surface, making a steady-state wind impossible. Photon-tiring is not an issue for line-driven winds since they cannot achieve sufficiently high mass loss rates. It can however become important if the star exceeds the Eddington limit and continuum interaction becomes the dominant driving mechanism. This paper investigates the time-dependent behaviour of stellar winds that exceed the photon-tiring limit, using 1-D numerical simulations of a porosity moderated, continuum-driven stellar wind. We find that the regions close to the star show a hierarchical pattern of high density shells moving back and forth, unable to escape the gravitational potential of the star. At larger distances, the flow eventually becomes uniformly outward, though still quite variable. Typically, these winds have a very high density but a terminal flow speed well below the escape speed at the stellar surface. Since most of the radiative luminosity of the star is used to drive the stellar wind, such stars would appear much dimmer than expected from the super-Eddington energy generation at their core. The visible luminosity typically constitutes less then half of the total energy flow and can become as low as ten percent or less for those stars that exceed the photon-tiring limit by a large margin.

In the course of the life of a massive star, wind-wind interaction can give rise to the formation of circumstellar nebulae which are both predicted and observed in the nature. We present generic model calculations to predict the properties of such nebulae for blue supergiants. From stellar evolution calculations including rotation, we obtain the time dependence of the stellar wind properties and of the stellar radiation field. These are used as input for hydro-calculations of the circumstellar medium throughout the star's life. Here, we present the results for a rapidly rotating 12 solar masses single star. This star undergoes a blue loop during its post main sequence evolution, at the onset of which its contraction spins it up close to critical rotation. Due to the consequent anisotropic mass loss, the blue supergiant wind sweeps up the preceding slow wind into an hour glass structure. Its collision with the previously formed spherical red supergiant wind shell forms a short-lived luminous nebula consisting of two polar caps and a central inner ring. With time, the polar caps evolve into mid-latitude rings which gradually move toward the equatorial plane while the central ring is fading. These structures are reminiscent to the observed nebulae around the blue supergiant Sher 25 and the progenitor of SN 1987A. The simple model of an hour glass colliding with a spherical shell retrieves most of the intriguing nebula geometries discovered around blue supergiants, and suggests them to form an evolutionary sequence. Our results indicate that binarity is not required to obtain them.

We present the results of numerical simulations of continuum-driven winds of stars that exceed the Eddington limit and compare these against predictions from earlier analytical solutions. Our models are based on the assumption that the stellar atmosphere consists of clumped matter, where the individual clumps have a much larger optical thickness than the matter between the clumps. This `porosity' of the stellar atmosphere reduces the coupling between radiation and matter, since photons tend to escape through the more tenuous gas between the clumps. This allows a star that formally exceeds the Eddington limit to remain stable, yet produce a steady outflow from the region where the clumps become optically thin. We have made a parameter study of wind models for a variety of input conditions in order to explore the properties of continuum-driven winds. The results show that the numerical simulations reproduce quite closely the analytical scalings. The mass loss rates produced in our models are much larger than can be achieved by line driving. This makes continuum driving a good mechanism to explain the large mass loss and flow speeds of giant outbursts, as observed in eta Carinae and other luminous blue variable (LBV) stars. Continuum driving may also be important in population III stars, since line driving becomes ineffective at low metalicities. We also explore the effect of photon tiring and the limits it places on the wind parameters.

During the course of their evolution, massive stars lose a substantial fraction of their initial mass, both through steady winds and through relatively brief eruptions during their Luminous Blue Variable (LBV) phase. This talk reviews the dynamical driving of this mass loss, contrasting the line-driving of steady winds to the potential role of continuum driving for eruptions during LBV episodes when the star exceeds the Eddington limit. A key theme is to emphasize the inherent limits that self-shadowing places on line-driven mass loss rates, whereas continuum driving can in principle drive mass up to the "photon-tiring" limit, for which the energy to lift the wind becomes equal to the stellar luminosity. We review how the "porosity" of a highly clumped atmosphere can regulate continuum-driven mass loss, but also discuss recent time-dependent simulations of how base mass flux that exceeds the tiring limit can lead to flow stagnation and a complex, time-dependent combination of inflow and outflow regions. A general result is thus that porosity-mediated continuum driving in super-Eddington phases can explain the large, near tiring-limit mass loss inferred for LBV giant eruptions.

Rapidly rotating, chemically homogeneously evolving massive stars are considered to be progenitors of long gamma-ray bursts. We present numerical simulations of the evolution of the circumstellar medium around a rapidly rotating 20 Msol star at a metallicity of Z=0.001. Its rotation is fast enough to produce quasi-chemically homogeneous evolution. While conventionally, a star of 20 Msol would not evolve into a Wolf-Rayet stage, the considered model evolves from the main sequence directly to the helium main sequence. We use the time-dependent wind parameters, such as mass loss rate, wind velocity and rotation-induced wind anisotropy from the evolution model as input for a 2D hydrodynamical simulation. While the outer edge of the pressure-driven circumstellar bubble is spherical, the circumstellar medium close to the star shows strong non-spherical features during and after the periods of near-critical rotation. We conclude that the circumstellar medium around rapidly rotating massive stars differs considerably from the surrounding material of non-rotating stars of similar mass. Multiple blue-shifted high velocity absorption components in gamma-ray burst afterglow spectra are predicted. As a consequence of near critical rotation and short stellar evolution time scales during the last few thousand years of the star's life, we find a strong deviation of the circumstellar density profile in the polar direction from the 1/R^2 density profile normally associated with stellar winds close to the star

Continuum driving is an effective method to drive a strong stellar wind. It is governed by two limits: the Eddington limit and the photon-tiring limit. A star must exceed the effective Eddington limit for continuum driving to overcome the stellar gravity. The photon-tiring limit places an upper limit on the mass loss rate that can be driven to infinity, given the energy available in the radiation field of the star. Since continuum driving does not require the presence of metals in the stellar atmosphere it is particularly suited to removing mass from low- and zero-metallicity stars and can play a crucial part in their evolution. Using a porosity length formalism we compute numerical simulations of super-Eddington, continuum driven winds to explore their behaviour for stars both below and above the photon-tiring limit. We find that below the photon tiring limit, continuum driving can produce a large, steady mass loss rate at velocities on the order of the escape velocity. If the star exceeds the photon-tiring limit, a steady solution is no longer possible. While the effective mass loss rate is still very large, the wind velocity is much smaller

Van Marle et al. (2005) showed that circumstellar absorption lines in early Type Ib/c supernova and gamma-ray burst afterglow spectra may reveal the progenitor evolution of the exploding Wolf-Rayet star. While the quoted paper deals with Wolf-Rayet stars which evolved through a red supergiant stage, we investigate here the initially more massive Wolf-Rayet stars which are thought to evolve through a Luminous Blue Variable (LBV) stage. We perform hydrodynamic simulations of the evolution of the circumstellar medium around a 60 Msol star, from the main sequence through the LBV and Wolf-Rayet stages, up to core collapse. We then compute the column density of the circumstellar matter as a function of radial velocity, time and angle. This allows a comparison with the number and blue-shifts, of absorption components in the spectra of LBVs, Wolf-Rayet stars, Type Ib/c supernovae and gamma-ray burst afterglows. Our simulation for the post-LBV stage shows the formation of various absorption components, which are, however, rather short lived; they dissipate on time scales shorter than 50,000yr. As the LBV stage is thought to occur at the beginning of core helium burning, the remaining Wolf-Rayet life time is expected to be one order of magnitude larger. When interpreting the absorption components in the afterglow spectrum of GRB-021004 as circumstellar, it can be concluded that the progenitor of this source did most likely not evolve through an LBV stage. However, a close binary with late common-envelope phase (Case C) may produce a circumstellar medium that closely resembles the LBV to Wolf-Rayet evolution, but with a much shorter Wolf-Rayet period.

We present hydrodynamical models of circumstellar medium (CSM) of long gamma-ray burst (GRB) progenitor candidates. These are massive stars that have lost a large amount of mass in the form of stellar wind during their evolution. There are two possible ways to probe the CSM of long GRB progenitors. Firstly, the GRB afterglow consists of synchrotron radiation, emitted when the GRB jet sweeps up the surrounding medium. Therefore, the lightcurve is directly related to the density profile of the CSM. The density can either decrease with the radius squared (as is the case for a freely expanding stellar wind) or be constant (as we would expect for shocked wind or the interstellar medium). Secondly, material between the GRB and the observer will absorb part of the afterglow radiation, causing absorption lines in the afterglow spectrum. In some cases, such absorption lines are blue-shifted relative to the source indicating that the material is moving away from the progenitor star. This can be explained in terms of wind interactions in the CSM. We can use the CSM of these stars to investigate their prior evolutionary stage.

The progenitor stars of long Gamma-Ray Bursts (GRBs) are thought to be Wolf-Rayet stars, which generate a massive and energetic wind. Nevertheless, about 25 percent of all GRB afterglows light curves indicate a constant density medium close to the exploding star. We explore various ways to produce this, by creating situations where the wind termination shock arrives very close to the star, as the shocked wind material has a nearly constant density. Typically, the distance between a Wolf-Rayet star and the wind termination shock is too large to allow afterglow formation in the shocked wind material. Here, we investigate possible causes allowing for a smaller distance: A high density or a high pressure in the surrounding interstellar medium (ISM), a weak Wolf-Rayet star wind, the presence of a binary companion, and fast motion of the Wolf-Rayet star relative to the ISM. We find that all four scenarios are possible in a limited parameter space, but that none of them is by itself likely to explain the large fraction of constant density afterglows. A low GRB progenitor metallicity, and a high GRB energy make the occurrence of a GRB afterglow in a constant density medium more likely. This may be consistent with constant densities beingpreferentially found for energetic, high redshift GRBs.

Long gamma-ray bursts are thought to be caused by a subset of exploding Wolf-Rayet stars. We argue that the circumstellar absorption lines in early supernova and in gamma-ray burst afterglow spectra may allow us to determine the main properties of the Wolf-Rayet star progenitors which can produce those two events. To demonstrate this, we first simulate the hydrodynamic evolution of the circumstellar medium around a 40 Msun star up to the time of the supernova explosion. Knowledge of density, temperature and radial velocity of the circumstellar matter as function of space and time allows us to compute the column density in the line of sight to the centre of the nebula, as a function of radial velocity, angle, and time. Our column density profiles indicate the possible number, strengths, widths and velocities of absorption line components in supernova and gamma-ray burst afterglow spectra. Our example calculation shows four distinct line features during the Wolf-Rayet stage, at about 0, 50, 150-700 and 2200 km/s, with only those of the lowest and highest velocity present at all times. The 150-700 km/s feature decays rapidly as function of time after the onset of the Wolf-Rayet stage. It consists of a variable number of components, and, especially in its evolved stage, is depending strongly on the particular line of sight. A comparison with absorption lines detected in the afterglow of GRB 021004 suggests that the high velocity absorption component in GRB 021004 may be attributed to the free streaming Wolf-Rayet wind, which is consistent with the steep density drop indicated by the afterglow light curve. The presence of the intermediate velocity components implies that the duration of the Wolf-Rayet phase of the progenitor of GRB 021004 was much smaller than the average Wolf-Rayet life time.