We investigate the formation and magnetic topology of four flare/CME events with filament-sigmoid systems, in which the sigmoidal hot channels are located above the filaments, and they appear in pairs prior to eruption.} The formation of hot channels usually takes several to dozens of hours during which two J-shape sheared arcades gradually evolve into sigmoidal hot channels, then they keep stable for tens of minutes or hours and erupt. While the low-lying filaments show no significant change. \textbf{We construct a series of magnetic field models and find that the best-fit preflare models contain magnetic flux ropes with hyperbolic flux tubes (HFTs). The field lines above the HFT correspond to the high-lying hot channel, while those below the HFT surround the underlying filaments. In particular, the continuous and long field lines representing the flux rope located above the HFT match the observed hot channels well in three events. While for SOL2014-04-18 event, the flux bundle that mimics the observed hot channel is located above the flux rope. The flux rope axis lies in a height range of 19.8 Mm and 46 Mm above the photosphere for the four events, among which the flux rope axis in SOL2012-07-12 event has a maximum height, which probably explains why it is often considered as a double-decker structure. Our modeling suggests that the high-lying hot channel may be formed by magnetic reconnections between sheared field lines occurring above the filament prior to eruption.

Parker's coronal braiding and nanoflaring scenario predicts the development of tangential discontinuities and highly misaligned magnetic field lines, as a consequence of random buffeting of their footpoints due to the action of sub-photospheric convection. The increased stressing of magnetic field lines is thought to become unstable above some critical misalignment angle and to result into local magnetic reconnection events, which is generally referred to as Parker's `nanoflaring scenario'. In this study we show that the {\sl minimum (magnetic) energy principle} leads to a bifurcation of force-free field solutions for helical twist angles at $|\varphi(t)| = \pi$, which prevents the build-up of arbitrary large free energies and misalignment angles. The minimum energy principle predicts that neighbored magnetic field lines are almost parallel (with misalignment angles of $\Delta \mu \approx 1.6^\circ-1.8^\circ$), and do not reach a critical misalignment angle prone to nanoflaring. Consequently, no nanoflares are expected in the divergence-free and force-free parts of the solar corona, while they are more likely to occur in the chromosphere and transition region.

We investigate two sympathetic filament eruptions observed by the New Vacuum Solar Telescope (NVST) on 2015 October 15. The full picture of the eruptions is obtained from the corresponding SDO/AIA observations. The two filaments start from active region NOAA 12434 in the north and end in one large quiescent filament channel in the south. The left filament erupts firstly, followed by the right filament eruption about 10 minutes later. Clear twist structure and rotating motion are observed in both filaments during the eruption. Both eruptions are failed, since the filaments firstly rise up, then flow towards the south and merge into the southern large quiescent filament. We also observe repeating activations of mini filaments below the right filament after its eruption. Using magnetic field models constructed based on SDO/HMI magnetograms by flux rope insertion method, we find that the left filament eruption is likely to be triggered by kink instability, while weakening of overlying magnetic fields due to magnetic reconnection at an X-point between the two filament systems might play an important role in the onset of the right filament eruption.

In this paper we further develop a model for the heating of coronal loops by Alfven wave turbulence (AWT). The Alfven waves are assumed to be launched from a collection of kilogauss flux tubes in the photosphere at the two ends of the loop. Using a three-dimensional magneto-hydrodynamic (MHD) model for an active-region loop, we investigate how the waves from neighboring flux tubes interact in the chromosphere and corona. For a particular combination of model parameters we find that AWT can produce enough heat to maintain a peak temperature of about 2.5 MK, somewhat lower than the temperatures of 3-4 MK observed in the cores of active regions. The heating rates vary strongly in space and time, but the simulated heating events have durations less than 1 minute and are unlikely to reproduce the observed broad Differential Emission Measure distributions of active regions. The simulated spectral line non-thermal widths are predicted to be about 27 km/s, which is high compared to the observed values. Therefore, the present AWT model does not satisfy the observational constraints. An alternative "magnetic braiding" model is considered in which the coronal field lines are subject to slow random footpoint motions, but we find that such long period motions produce much less heating than the shorter period waves launched within the flux tubes. We discuss several possibilities for resolving the problem of producing sufficiently hot loops in active regions.

Alfv\'{e}n waves are believed to play an important role in the heating and acceleration of the fast solar wind emanating from coronal holes. Nonlinear interactions between the dominant ${\bf z}_{+}$ waves and minority ${\bf z}_{-}$ waves have the potential to transfer wave energy either to smaller perpendicular scales ("direct cascade") or to larger scales ("inverse cascade"). In this paper we use reduced magnetohydrodynamic (RMHD) simulations to investigate how the cascade rates $\epsilon_{\pm}$ depend on perpendicular wavenumber and radial distance from Sun center. For models with a smooth background atmosphere we find that an inverse cascade ($\epsilon_{+} < 0$) occurs for the dominant waves at radii between 1.4 and 2.5 $R_\odot$ and dimensionless wavenumbers in the inertial range ($15 < a_\perp < 44$), and a direct cascade ($\epsilon_{+} > 0$) occurs elsewhere. For a model with density fluctuations there are multiple regions with inverse cascade. In both cases the cascade rate $\epsilon_{+}$ varies significantly with perpendicular wavenumber, indicating that the cacsade is a highly non-local process. As a result of the inverse cascades, the enery dissipation rates are much lower than expected from a phenomenological model, and are insufficient to maintain the temperature of the background atmosphere. We conclude that RMHD models are unable to reproduce the observed properties of the fast solar wind.

We present numerical simulations of reduced magnetohydrodynamic (RMHD) turbulence in a magnetic flux tube at the center of a polar coronal hole. The model for the background atmosphere is a solution of the momentum equation, and includes the effects of wave pressure on the solar wind outflow. Alfv\'{e}n waves are launched at the coronal base, and reflect at various heights due to variations in Alfv\'{e}n speed and outflow velocity. The turbulence is driven by nonlinear interactions between the counter-propagating Alfv\'{e}n waves. Results are presented for two models of the background atmosphere. In the first model the plasma density and Alfv\'{e}n speed vary smoothly with height, resulting in minimal wave reflections and low energy dissipation rates. We find that the dissipation rate is insufficient to maintain the temperature of the background atmosphere. The standard phenomenological formula for the dissipation rate significantly overestimates the rate derived from our RMHD simulations, and a revised formula is proposed. In the second model we introduce additional density variations along the flux tube with a correlation length of 0.04 $R_\odot$ and with relative amplitude of $10 \%$. These density variations simulate the effects of compressive MHD waves on the Alfv\'{e}n waves. We find that such variations significantly enhance the wave reflection and thereby the turbulent dissipation rates, producing enough heat to maintain the background atmosphere. We conclude that interactions between Alfv\'{e}n- and compressive waves may play an important role in the turbulent heating of the fast solar wind.

We present an investigation of the polar crown prominence that erupted on 2012 March 12. This prominence is observed at the southeast limb by SDO/AIA (end-on view) and displays a quasi vertical-thread structure. Bright U-shape/horn-like structure is observed surrounding the upper portion of the prominence at 171 angstrom before the eruption and becomes more prominent during the eruption. The disk view of STEREO-B shows that this long prominence is composed of a series of vertical threads and displays a half loop-like structure during the eruption. We focus on the magnetic support of the prominence vertical threads by studying the structure and dynamics of the prominence before and during the eruption using observations from SDO and STEREO-B. We also construct a series of magnetic field models (sheared arcade model, twisted flux rope model, and unstable model with hyperbolic flux tube (HFT)). Various observational characteristics appear to be in favor of the twisted flux rope model. We find that the flux rope supporting the prominence enters the regime of torus instability at the onset of the fast rise phase, and signatures of reconnection (post-eruption arcade, new U-shape structure, rising blobs) appear about one hour later. During the eruption, AIA observes dark ribbons seen in absorption at 171 angstrom corresponding to the bright ribbons shown at 304 angstrom, which might be caused by the erupting filament material falling back along the newly reconfigured magnetic fields. Brightenings at the inner edge of the erupting prominence arcade are also observed in all AIA EUV channels, which might be caused by the heating due to energy released from reconnection below the rising prominence.

In the quiet solar photosphere, the mixed polarity fields form a magnetic carpet, which continuously evolves due to dynamical interaction between the convective motions and magnetic field. This interplay is a viable source to heat the solar atmosphere. In this work, we used the line-of-sight (LOS) magnetograms obtained from the Helioseismic and Magnetic Imager (HMI) on the \textit{Solar Dynamics Observatory} (\textit{SDO}), and the Imaging Magnetograph eXperiment (IMaX) instrument on the \textit{Sunrise} balloon-borne observatory, as time dependent lower boundary conditions, to study the evolution of the coronal magnetic field. We use a magneto-frictional relaxation method, including hyperdiffusion, to produce time series of three-dimensional (3D) nonlinear force-free fields from a sequence of photospheric LOS magnetograms. Vertical flows are added up to a height of 0.7 Mm in the modeling to simulate the non-force-freeness at the photosphere-chromosphere layers. Among the derived quantities, we study the spatial and temporal variations of the energy dissipation rate, and energy flux. Our results show that the energy deposited in the solar atmosphere is concentrated within 2 Mm of the photosphere and there is not sufficient energy flux at the base of the corona to cover radiative and conductive losses. Possible reasons and implications are discussed. Better observational constraints of the magnetic field in the chromosphere are crucial to understand the role of the magnetic carpet in coronal heating.

The structure of the coronal magnetic field prior to eruptive processes and the conditions for the onset of eruption are important issues that can be addressed through studying the magnetohydrodynamic stability and evolution of nonlinear force-free field (NLFFF) models. This paper uses data-constrained NLFFF models of a solar active region that erupted on 2010 April 8 as initial condition in MHD simulations. These models, constructed with the techniques of flux rope insertion and magnetofrictional relaxation, include a stable, an approximately marginally stable, and an unstable configuration. The simulations confirm previous related results of magnetofrictional relaxation runs, in particular that stable flux rope equilibria represent key features of the observed pre-eruption coronal structure very well and that there is a limiting value of the axial flux in the rope for the existence of stable NLFFF equilibria. The specific limiting value is located within a tighter range, due to the sharper discrimination between stability and instability by the MHD description. The MHD treatment of the eruptive configuration yields very good agreement with a number of observed features like the strongly inclined initial rise path and the close temporal association between the coronal mass ejection and the onset of flare reconnection. Minor differences occur in the velocity of flare ribbon expansion and in the further evolution of the inclination; these can be eliminated through refined simulations. We suggest that the slingshot effect of horizontally bent flux in the source region of eruptions can contribute significantly to the inclination of the rise direction. Finally, we demonstrate that the onset criterion formulated in terms of a threshold value for the axial flux in the rope corresponds very well to the threshold of the torus instability in the considered active region.

The solar atmosphere may be heated by Alfven waves that propagate up from the convection zone and dissipate their energy in the chromosphere and corona. To further test this theory, we consider wave heating in an active region observed on 2012 March 7. A potential field model of the region is constructed, and 22 field lines representing observed coronal loops are traced through the model. Using a three-dimensional (3D) reduced magneto-hydrodynamics (MHD) code, we simulate the dynamics of Alfven waves in and near the observed loops. The results for different loops are combined into a single formula describing the average heating rate Q as function of position within the observed active region. We suggest this expression may be approximately valid also for other active regions, and therefore may be used to construct 3D, time-dependent models of the coronal plasma. Such models are needed to understand the role of thermal non-equilibrium in the structuring and dynamics of the Sun's corona.

The large-scale field of the Sun is well represented by its lowest energy (or potential) state. Recent observations, by comparison, reveal that many solar-type stars show large-scale surface magnetic fields that are highly non-potential - that is, they have been stressed above their lowest-energy state. This non-potential component of the surface field is neglected by current stellar wind models. The aim of this paper is to determine its effect on the coronal structure and wind. We use Zeeman-Doppler surface magnetograms of two stars - one with an almost potential, one with a non-potential surface field - to extrapolate a static model of the coronal structure for each star. We find that the stresses are carried almost exclusively in a band of uni-directional azimuthal field that is confined to mid-latitudes. Using this static solution as an initial state for an MHD wind model, we then find that the final state is determined primarily by the potential component of the surface magnetic field. The band of azimuthal field must be confined close to the stellar surface as it is not compatible with a steady-state wind. By artificially increasing the stellar rotation rate we demonstrate that the observed azimuthal fields can not be produced by the action of the wind but must be due to processes at or below the stellar surface. We conclude that the background winds of solar-like stars are largely unaffected by these highly-stressed surface fields. Nonetheless, the increased flare activity and associated coronal mass ejections that may be expected to accompany such highly-stressed fields may have a significant impact on any surrounding planets.

The dense prominence material is believed to be supported against gravity through the magnetic tension of dipped coronal magnetic field. For quiescent prominences, which exhibit many gravity-driven flows, hydrodynamic forces are likely to play an important role in the determination of both the large and small scale magnetic field distributions. In this study, we present the first steps toward creating three-dimensional magneto-hydrostatic prominence model where the prominence is formed in the dips of a coronal flux tube. Here 2.5D equilibria are created by adding mass to an initially force-free magnetic field, then performing a secondary magnetohydrodynamic relaxation. Two inverse polarity magnetic field configurations are studied in detail, a simple o-point configuration with a ratio of the horizontal field (B_x) to the axial field (B_y) of 1:2 and a more complex model that also has an x-point with a ratio of 1:11. The models show that support against gravity is either by total pressure or tension, with only tension support resembling observed quiescent prominences. The o-point of the coronal flux tube was pulled down by the prominence material, leading to compression of the magnetic field at the base of the prominence. Therefore tension support comes from the small curvature of the compressed magnetic field at the bottom and the larger curvature of the stretched magnetic field at the top of the prominence. It was found that this method does not guarantee convergence to a prominence-like equilibrium in the case where an x-point exists below the prominence flux tube. The results imply that a plasma beta of ~ 0.1 is necessary to support prominences through magnetic tension.

We used data from the Helioseismic and Magnetic Imager (HMI), and Atmospheric Imaging Assembly (AIA) on the \textit{Solar Dynamics Observatory} (SDO) to study coronal loops at small scales, emerging in the quiet Sun. With HMI line-of-sight magnetograms, we derive the integrated and unsigned photospheric magnetic flux at the loop footpoints in the photosphere. These loops are bright in the EUV channels of AIA. Using the six AIA EUV filters, we construct the differential emission measure (DEM) in the temperature range $5.7 - 6.5$ in log $T$ (K) for several hours of observations. The observed DEMs have a peak distribution around log $T \approx$ 6.3, falling rapidly at higher temperatures. For log $T <$ 6.3, DEMs are comparable to their peak values within an order of magnitude. The emission weighted temperature is calculated, and its time variations are compared with those of magnetic flux. We present two possibilities for explaining the observed DEMs and temperatures variations. (a) Assuming the observed loops are comprised of hundred thin strands with certain radius and length, we tested three time-dependent heating models and compared the resulting DEMs and temperatures with the observed quantities. This modeling used Enthalpy-based Thermal Evolution of Loops (EBTEL), a zero-dimensional (0D) hydrodynamic code. The comparisons suggest that a medium frequency heating model with a population of different heating amplitudes can roughly reproduce the observations. (b) We also consider a loop model with steady heating and non-uniform cross-section of the loop along its length, and find that this model can also reproduce the observed DEMs, provided the loop expansion factor $\gamma \sim$ 5 - 10. More observational constraints are required to better understand the nature of coronal heating in the short emerging loops on the quiet Sun.

This paper is the third in a series of papers working towards the construction of a realistic, evolving, non-linear force-free coronal field model for the solar magnetic carpet. Here, we present preliminary results of 3D time-dependent simulations of the small-scale coronal field of the magnetic carpet. Four simulations are considered, each with the same evolving photospheric boundary condition: a 48 hr time series of synthetic magnetograms produced from the model of Meyer, Mackay, van Ballegooijen and Parnell, 2011, Solar Phys., 272, 29. Three simulations include a uniform, overlying coronal magnetic field of differing strength, the fourth simulation includes no overlying field. The build-up, storage and dissipation of magnetic energy within the simulations is studied. In particular, we study their dependence upon the evolution of the photospheric magnetic field and the strength of the overlying coronal field. We also consider where energy is stored and dissipated within the coronal field. The free magnetic energy built up is found to be more than sufficient to power small-scale, transient phenomena such as nanoflares and X-ray bright points, with the bulk of the free energy found to be stored low down, between 0.5-0.8 Mm. The energy dissipated is presently found to be too small to account for the heating of the entire quiet Sun corona. However, the form and location of energy dissipation regions are in qualitative agreement with what is observed on small scales on the Sun. Future MHD modelling using the same synthetic magnetograms may lead to a higher energy release.

The solar wind is connected to the Sun's atmosphere by flux tubes that are rooted in an ever-changing pattern of positive and negative magnetic polarities on the surface. Observations indicate that the magnetic field is filamentary and intermittent across a wide range of spatial scales. However, we do not know to what extent the complex flux tube topology seen near the Sun survives as the wind expands into interplanetary space. In order to study the possible long-distance connections between the corona and the heliosphere, we developed new models of turbulence-driven solar wind acceleration along empirically constrained field lines. We used a potential-field model of the Quiet Sun to trace field lines into the ecliptic plane with unprecedented spatial resolution at their footpoints. For each flux tube, a one-dimensional model was created with an existing wave/turbulence code that solves equations of mass, momentum, and energy conservation from the photosphere to 4 AU. To take account of stream-stream interactions between flux tubes, we used those models as inner boundary conditions for a time-steady MHD description of radial and longitudinal structure in the ecliptic. Corotating stream interactions smear out much of the smallest-scale variability, making it difficult to see how individual flux tubes on granular or supergranular scales can survive out to 1 AU. However, our models help clarify the level of "background" variability with which waves and turbulent eddies should be expected to interact. Also, the modeled fluctuations in magnetic field magnitude were seen to match measured power spectra quite well.

A large polar-crown prominence composed of different segments spanning nearly the entire solar disk erupted on 2010 December 6. Prior to the eruption, the filament in the active region part splits into two layers: a lower layer and an elevated layer. The eruption occurs in several episodes. Around 14:12 UT, the lower layer of the active region filament breaks apart, one part ejects towards the west, while the other part ejects towards the east, which leads to the explosive eruption of the eastern quiescent filament. During the early rise phase, part of the quiescent filament sheet displays strong rolling motion (observed by STEREO$\_$B) in the clockwise direction (views from east to west) around the filament axis. This rolling motion appears to start from the border of the active region, then propagates towards the east. AIA observes another type of rotating motion: in some other parts of the erupting quiescent prominence the vertical threads turn horizontal, then turn upside down. The elevated active region filament does not erupt until 18:00 UT, when the erupting quiescent filament already reaches a very large height. We develop two simplified three-dimensional models which qualitatively reproduce the observed rolling and rotating motions. The prominence in the models is assumed to consist of a collection of discrete blobs that are tied to particular field lines of a helical flux rope. The observed rolling motion is reproduced by continuous twist injection into the flux rope in Model 1 from the active region side. Asymmetric reconnection induced by the asymmetric distribution of the magnetic fields on the two sides of the filament may cause the observed rolling motion. The rotating motion of the prominence threads observed by AIA is consistent with the removal of the field line dips in Model 2 from the top down during the eruption.

This paper is the second in a series of studies working towards constructing a realistic, evolving, non-potential coronal model for the solar magnetic carpet. In the present study, the interaction of two magnetic elements is considered. Our objectives are to study magnetic energy build up, storage and dissipation as a result of emergence, cancellation, and flyby of these magnetic elements. In the future these interactions will be the basic building blocks of more complicated simulations involving hundreds of elements. Each interaction is simulated in the presence of an overlying uniform magnetic field, which lies at various orientations with respect to the evolving magnetic elements. For these three small-scale interactions, the free energy stored in the field at the end of the simulation ranges from $0.2-2.1\times 10^{26}$ ergs, while the total energy dissipated ranges from $1.3-6.3\times 10^{26}$ ergs. For all cases, a stronger overlying field results in higher energy storage and dissipation. For the cancellation and emergence simulations, motion perpendicular to the overlying field results in the highest values. For the flyby simulations, motion parallel to the overlying field gives the highest values. In all cases, the free energy built up is sufficient to explain small-scale phenomena such as X-ray bright points or nanoflares. In addition, if scaled for the correct number of magnetic elements for the volume considered, the energy continually dissipated provides a significant fraction of the quiet Sun coronal heating budget.

We present a study on the structure of quiescent filament channels observed by Hinode/XRT and STEREO/EUVI from December 2006 to February 2009. For 10 channels identified on the solar disk, we find that the emission on the two sides of the channel is asymmetric in both X-rays and EUV: one side has curved bright features while the other side has straight faint features. We interpret the results in terms of a magnetic flux rope model. The asymmetry in the emission is due to the variation in axial magnetic flux along the channel, which causes one polarity to turn into the flux rope, while the field lines from the other polarity are open or connected to very distant sources. For 70 channels identified by cavities at the limb, the asymmetry cannot be clearly identified.

We present observations and magnetic field modeling of the large polar crown prominence that erupted on 2010 December 6. Combination of SDO/AIA and STEREO$\_$Behind/EUVI allows us to see the fine structures of this prominence both at the limb and on the disk. We focus on the structures and dynamics of this prominence before the eruption. This prominence contains two parts: an active region part containing mainly horizontal threads, and a quiet Sun part containing mainly vertical threads. On the northern side of the prominence channel, both AIA and EUVI observe bright features which appear to be the lower legs of loops that go above then join in the filament. Filament materials are observed to frequently eject horizontally from the active region part to the quiet Sun part. This ejection results in the formation of a dense-column structure (concentration of dark vertical threads) near the border between the active region and the quiet Sun. Using the flux rope insertion method, we create non-linear force-free field models based on SDO/HMI line-of-sight magnetograms. A key feature of these models is that the flux rope has connections with the surroundings photosphere, so its axial flux varies along the filament path. The height and location of the dips of field lines in our models roughly replicate those of the observed prominence. Comparison between model and observations suggests that the bright features on the northern side of the channel are the lower legs of the field lines that turn into the flux rope. We suggest that plasma may be injected into the prominence along these field lines. Although the models fit the observations quiet well, there are also some interesting differences. For example, the models do not reproduce the observed vertical threads and cannot explain the formation of the dense-column structure.

In the parts of the solar corona and solar wind that experience the fewest Coulomb collisions, the component proton, electron, and heavy ion populations are not in thermal equilibrium with one another. Observed differences in temperatures, outflow speeds, and velocity distribution anisotropies are useful constraints on proposed explanations for how the plasma is heated and accelerated. This paper presents new predictions of the rates of collisionless heating for each particle species, in which the energy input is assumed to come from magnetohydrodynamic (MHD) turbulence. We first created an empirical description of the radial evolution of Alfven, fast-mode, and slow-mode MHD waves. This model provides the total wave power in each mode as a function of distance along an expanding flux tube in the high-speed solar wind. Next we solved a set of cascade advection-diffusion equations that give the time-steady wavenumber spectra at each distance. An approximate term for nonlinear coupling between the Alfven and fast-mode fluctuations is included. For reasonable choices of the parameters, our model contains enough energy transfer from the fast mode to the Alfven mode to excite the high-frequency ion cyclotron resonance. This resonance is efficient at heating protons and other ions in the direction perpendicular to the background magnetic field, and our model predicts heating rates for these species that agree well with both spectroscopic and in situ measurements. Nonetheless, the high-frequency waves comprise only a small part of the total Alfvenic fluctuation spectrum, which remains highly two-dimensional as is observed in interplanetary space.

The sub-arcsec bright points (BP) associated with the small scale magnetic fields in the lower solar atmosphere are advected by the evolution of the photospheric granules. We measure various quantities related to the horizontal motions of the BPs observed in two wavelengths, including the velocity auto-correlation function. A 1 hr time sequence of wideband H$\alpha$ observations conducted at the \textit{Swedish 1-m Solar Telescope} (\textit{SST}), and a 4 hr \textit{Hinode} \textit{G}-band time sequence observed with the Solar Optical telescope are used in this work. We follow 97 \textit{SST} and 212 \textit{Hinode} BPs with 3800 and 1950 individual velocity measurements respectively. For its high cadence of 5 s as compared to 30 s for \textit{Hinode} data, we emphasize more on the results from \textit{SST} data. The BP positional uncertainty achieved by \textit{SST} is as low as 3 km. The position errors contribute 0.75 km$^2$ s$^{-2}$ to the variance of the observed velocities. The \textit{raw} and \textit{corrected} velocity measurements in both directions, i.e., $(v_x,v_y)$, have Gaussian distributions with standard deviations of $(1.32,1.22)$ and $(1.00, 0.86)$ km s$^{-1}$ respectively. The BP motions have correlation times of about $22 - 30$ s. We construct the power spectrum of the horizontal motions as a function of frequency, a quantity that is useful and relevant to the studies of generation of Alfv\'en waves. Photospheric turbulent diffusion at time scales less than 200 s is found to satisfy a power law with an index of 1.59.

We present two-dimensional resistive magnetohydrodynamic simulations of line-tied asymmetric magnetic reconnection in the context of solar flare and coronal mass ejection current sheets. The reconnection process is made asymmetric along the inflow direction by allowing the initial upstream magnetic field strengths and densities to differ, and along the outflow direction by placing the initial perturbation near a conducting wall boundary that represents the photosphere. When the upstream magnetic fields are asymmetric, the post-flare loop structure is distorted into a characteristic skewed candle flame shape. The simulations can thus be used to provide constraints on the reconnection asymmetry in post-flare loops. More hard X-ray emission is expected to occur at the footpoint on the weak magnetic field side because energetic particles are more likely to escape the magnetic mirror there than at the strong magnetic field footpoint. The footpoint on the weak magnetic field side is predicted to move more quickly because of the requirement in two dimensions that equal amounts of flux must be reconnected from each upstream region. The X-line drifts away from the conducting wall in all simulations with asymmetric outflow and into the strong magnetic field region during most of the simulations with asymmetric inflow. There is net plasma flow across the X-line for both the inflow and outflow directions. The reconnection exhaust directed away from the obstructing wall is significantly faster than the exhaust directed towards it. The asymmetric inflow condition allows net vorticity in the rising outflow plasmoid which would appear as rolling motions about the flux rope axis.

This paper describes a new 2D model for the photospheric evolution of the magnetic carpet. It is the first in a series of papers working towards constructing a realistic 3D non-potential model for the interaction of small-scale solar magnetic fields. In the model, the basic evolution of the magnetic elements is governed by a supergranular flow profile. In addition, magnetic elements may evolve through the processes of emergence, cancellation, coalescence and fragmentation. Model parameters for the emergence of bipoles are based upon the results of observational studies. Using this model, several simulations are considered, where the range of flux with which bipoles may emerge is varied. In all cases the model quickly reaches a steady state where the rates of emergence and cancellation balance. Analysis of the resulting magnetic field shows that we reproduce observed quantities such as the flux distribution, mean field, cancellation rates, photospheric recycle time and a magnetic network. As expected, the simulation matches observations more closely when a larger, and consequently more realistic, range of emerging flux values is allowed (4e16 - 1e19 Mx). The model best reproduces the current observed properties of the magnetic carpet when we take the minimum absolute flux for emerging bipoles to be 4e16 Mx. In future, this 2D model will be used as an evolving photospheric boundary condition for 3D non-potential modeling.

A three-dimensional MHD model for the propagation and dissipation of Alfven waves in a coronal loop is developed. The model includes the lower atmospheres at the two ends of the loop. The waves originate on small spatial scales (less than 100 km) inside the kilogauss flux elements in the photosphere. The model describes the nonlinear interactions between Alfven waves using the reduced MHD approximation. The increase of Alfven speed with height in the chromosphere and transition region (TR) causes strong wave reflection, which leads to counter-propagating waves and turbulence in the photospheric and chromospheric parts of the flux tube. Part of the wave energy is transmitted through the TR and produces turbulence in the corona. We find that the hot coronal loops typically found in active regions can be explained in terms of Alfven wave turbulence, provided the small-scale footpoint motions have velocities of 1-2 km/s and time scales of 60-200 s. The heating rate per unit volume in the chromosphere is 2 to 3 orders of magnitude larger than that in the corona. We construct a series of models with different values of the model parameters, and find that the coronal heating rate increases with coronal field strength and decreases with loop length. We conclude that coronal loops and the underlying chromosphere may both be heated by Alfvenic turbulence.

In February 2011 we proposed a NASA Explorer Mission of Opportunity program to develop and operate a large-aperture ultraviolet coronagraph spectrometer called the Coronal Physics Investigator (CPI) as an attached International Space Station (ISS) payload. The primary goal of this program is to identify and characterize the physical processes that heat and accelerate the primary and secondary components of the fast and slow solar wind. In addition, CPI can make key measurements needed to understand CMEs. UVCS/SOHO allowed us to identify what additional measurements need to be made to answer the fundamental questions about how solar wind streams are produced, and CPI's next-generation capabilities were designed specifically to make those measurements. Compared to previous instruments, CPI provides unprecedented sensitivity, a wavelength range extending from 25.7 to 126 nm, higher temporal resolution, and the capability to measure line profiles of He II, N V, Ne VII, Ne VIII, Si VIII, S IX, Ar VIII, Ca IX, and Fe X, never before seen in coronal holes above 1.3 solar radii. CPI will constrain the properties and effects of coronal MHD waves by (1) observing many ions over a large range of charge and mass, (2) providing simultaneous measurements of proton and electron temperatures to probe turbulent dissipation mechanisms, and (3) measuring amplitudes of low-frequency compressive fluctuations. CPI is an internally occulted ultraviolet coronagraph that provides the required high sensitivity without the need for a deployable boom, and with all technically mature hardware including an ICCD detector. A highly experienced Explorer and ISS contractor, L-3 Com Integrated Optical Systems and Com Systems East, will provide the tracking and pointing system as well as the instrument, and the integration to the ISS.

In this paper a new technique for modeling non-linear force-free fields directly from line of sight magnetogram observations is presented. The technique uses sequences of magnetograms directly as lower boundary conditions to drive the evolution of coronal magnetic fields between successive force-free equilibria over long periods of time. It is illustrated by applying it to MDI observations of a decaying active region, NOAA AR 8005. The active region is modeled during a 4 day period around its central meridian passage. Over this time, the dispersal of the active region is dominated by random motions due to small scale convective cells. Through studying the build up of magnetic energy in the model, it is found that such small scale motions may inject anywhere from $2.5-3 \times 10^{25}$ erg s$^{-1}$ of free magnetic energy into the coronal field. Most of this energy is stored within the center of the active region in the low corona, below 30 Mm. After 4 days the build-up of free energy is 10% that of the corresponding potential field. This energy buildup, is sufficient to explain the radiative losses at coronal temperatures within the active region. Small scale convective motions therefore play an integral part in the energy balance of the corona. This new technique has wide ranging applications with the new high resolution, high cadence observations from the SDO:HMI and SDO:AIA instruments.

Understanding the physical processes responsible for accelerating the solar wind requires detailed measurements of the collisionless plasma in the extended solar corona. Some key clues about these processes have come from instruments that combine the power of an ultraviolet (UV) spectrometer with an occulted telescope. This combination enables measurements of ion emission lines far from the bright solar disk, where most of the solar wind acceleration occurs. Although the UVCS instrument on SOHO made several key discoveries, many questions remain unanswered because its capabilities were limited. This white paper summarizes these past achievements and also describes what can be accomplished with next-generation instrumentation of this kind.

The physical processes that heat the solar corona and accelerate the solar wind remain unknown after many years of study. Some have suggested that the wind is driven by waves and turbulence in open magnetic flux tubes, and others have suggested that plasma is injected into the open tubes by magnetic reconnection with closed loops. In order to test the latter idea, we developed Monte Carlo simulations of the photospheric "magnetic carpet" and extrapolated the time-varying coronal field. These models were constructed for a range of different magnetic flux imbalance ratios. Completely balanced models represent quiet regions on the Sun and source regions of slow solar wind streams. Highly imbalanced models represent coronal holes and source regions of fast wind streams. The models agree with observed emergence rates, surface flux densities, and number distributions of magnetic elements. Despite having no imposed supergranular motions, a realistic network of magnetic "funnels" appeared spontaneously. We computed the rate at which closed field lines open up (i.e., recycling times for open flux), and we estimated the energy flux released in reconnection events involving the opening up of closed flux tubes. For quiet regions and mixed-polarity coronal holes, these energy fluxes were found to be much lower than required to accelerate the solar wind. For the most imbalanced coronal holes, the energy fluxes may be large enough to power the solar wind, but the recycling times are far longer than the time it takes the solar wind to accelerate into the low corona. Thus, it is unlikely that either the slow or fast solar wind is driven by reconnection and loop-opening processes in the magnetic carpet.

Measurements of the interplanetary magnetic field (IMF) over several solar cycles do not agree with computed values of open magnetic flux from potential field extrapolations. The discrepancy becomes greater around solar maximum in each cycle, when the IMF can be twice as strong as predicted by the potential field model. Here we demonstrate that this discrepancy may be resolved by allowing for electric currents in the low corona (below 2.5 solar radii). We present a quasi-static numerical model of the large-scale coronal magnetic evolution, which systematically produces these currents through flux emergence and shearing by surface motions. The open flux is increased by 75%-85% at solar maximum, but only 25% at solar minimum, bringing it in line with estimates from IMF measurements. The additional open flux in the non-potential model arises through inflation of the magnetic field by electric currents, with super-imposed fluctuations due to coronal mass ejections. The latter are modelled by the self-consistent ejection of twisted magnetic flux ropes.

This paper reviews our growing understanding of the physics behind coronal heating (in open-field regions) and the acceleration of the solar wind. Many new insights have come from the last solar cycle's worth of observations and theoretical work. Measurements of the plasma properties in the extended corona, where the primary solar wind acceleration occurs, have been key to discriminating between competing theories. We describe how UVCS/SOHO measurements of coronal holes and streamers over the last 14 years have provided clues about the detailed kinetic processes that energize both fast and slow wind regions. We also present a brief survey of current ideas involving the coronal source regions of fast and slow wind streams, and how these change over the solar cycle. These source regions are discussed in the context of recent theoretical models (based on Alfven waves and MHD turbulence) that have begun to successfully predict both the heating and acceleration in fast and slow wind regions with essentially no free parameters. Some new results regarding these models - including a quantitative prediction of the lower density and temperature at 1 AU seen during the present solar minimum in comparison to the prior minimum - are also shown.

Solar prominences are an important tool for studying the structure and evolution of the coronal magnetic field. Here we consider so-called "hedgerow" prominences, which consist of thin vertical threads. We explore the possibility that such prominences are supported by tangled magnetic fields. A variety of different approaches are used. First, the dynamics of plasma within a tangled field is considered. We find that the contorted shape of the flux tubes significantly reduces the flow velocity compared to the supersonic free fall that would occur in a straight vertical tube. Second, linear force-free models of tangled fields are developed, and the elastic response of such fields to gravitational forces is considered. We demonstrate that the prominence plasma can be supported by the magnetic pressure of a tangled field that pervades not only the observed dense threads but also their local surroundings. Tangled fields with field strengths of about 10 G are able to support prominence threads with observed hydrogen density of the order of 10^(11) cm^(-3). Finally, we suggest that the observed vertical threads are the result of Rayleigh-Taylor instability. Simulations of the density distribution within a prominence thread indicate that the peak density is much larger than the average density. We conclude that tangled fields provide a viable mechanism for magnetic support of hedgerow prominences.

The relative importance of different initiation mechanisms for coronal mass ejections (CMEs) on the Sun is uncertain. One possible mechanism is the loss of equilibrium of coronal magnetic flux ropes formed gradually by large-scale surface motions. In this paper, the locations of flux rope ejections in a recently-developed quasi-static global evolution model are compared with observed CME source locations over a 4.5-month period in 1999. Using EUV data, the low-coronal source locations are determined unambiguously for 98 out of 330 CMEs. Despite the incomplete observations, positive correlation (with coefficient up to 0.49) is found between the distributions of observed and simulated ejections, but only when binned into periods of one month or longer. This binning timescale corresponds to the time interval at which magnetogram data are assimilated into the coronal simulations, and the correlation arises primarily from the large-scale surface magnetic field distribution; only a weak dependence is found on the magnetic helicity imparted to the emerging active regions. The simulations are limited in two main ways: they produce fewer ejections, and they do not reproduce the strong clustering of observed CME sources into active regions. Due to this clustering, the horizontal gradient of radial photospheric magnetic field is better correlated with the observed CME source distribution (coefficient 0.67). Our results suggest that, while the gradual formation of magnetic flux ropes over weeks can account for many observed CMEs, especially at higher latitudes, there exists a second class of CMEs (at least half) for which dynamic active region flux emergence on shorter timescales must be the dominant factor.

First, we describe a general procedure to produce high quality vector magnetograms using the Imaging Vector Magnetograph (IVM) at Mees Solar Observatory. At the spatial resolution 2"x2", the Stokes Q,U,V uncertainty reaches 0.001-0.0005 in time-averaged data over 1-hour in the quiet Sun. When vector magnetic fields are inferred from the time-averaged Stokes spectral images of FeI 6302.5A, the resulting uncertainties are on the order of 10 G for the longitudinal fields, 40 G for the transverse field strength and 9 degree for the magnetic azimuth. The magnetic field inversion used in this work is the "Triplet" code, which was developed and implemented in the IVM software package by the late Barry J. LaBonte. The inversion code is described in detail in the Appendix. Second, we solve for the absolute value of the vertical electric current density, |Jz|, accounting for the above IVM problems, for two different active regions. One is a single sunspot region (NOAA 10001 observed on 20 June 2002) while the other is a more complex, quadrupolar region (NOAA10030 observed on 15 July 2002). We use a calculation that does not require disambiguation of 180 degree in the transverse field directions. The |Jz| uncertainty is on the order of 7.0 mA m^-2. The vertical current density increases with increasing vertical magnetic field. The rate of increase is about 1 -2 times as large in the quadrupolar NOAA 10030 region as in the simple NOAA 10001, and it is more spatially variable over NOAA 10030 than over NOAA 10001.

Current helicity quantifies the location of twisted and sheared non-potential structures in a magnetic field. We simulate the evolution of magnetic fields in the solar atmosphere in response to flux emergence and shearing by photospheric motions. In our global-scale simulation over many solar rotations the latitudinal distribution of current helicity develops a clear statistical pattern, matching the observed hemispheric sign at active latitudes. In agreement with observations there is significant scatter and intermixing of both signs of helicity, where we find local values of current helicity density that are much higher than those predicted by linear force-free extrapolations. Forthcoming full-disk vector magnetograms from Solar Dynamics Observatory will provide an ideal opportunity to test our theoretical results on the evolution and distribution of current helicity, both globally and in single active regions.

We consider recent observations of the chromospheric network, and argue that the bright network grains observed in the Ca II H & K lines are heated by an as yet unidentified quasi-steady process. We propose that the heating is caused by dissipation of short-period magnetoacoustic waves in magnetic flux tubes (periods less than 100 s). Magnetohydrodynamic (MHD) models of such waves are presented. We consider wave generation in the network due to two separate processes: (a) by transverse motions at the base of the flux tube; and (b) by the absorption of acoustic waves generated in the ambient medium. We find that the former mechanism leads to an efficient heating of the chromosphere by slow magnetoacoustic waves propagating along magnetic field lines. This heating is produced by shock waves with a horizontal size of a few hundred kilometers. In contrast, acoustic waves excited in the ambient medium are converted into transverse fast modes that travel rapidly through the flux tube and do not form shocks, unless the acoustic sources are located within 100 km from the tube axis. We conclude that the magnetic network may be heated by magnetoacoustic waves that are generated in or near the flux tubes.

A theory for the heating of coronal magnetic flux ropes is developed. The dissipated magnetic energy has two distinct contributions: (1) energy injected into the corona as a result of granule-scale, random footpoint motions, and (2) energy from the large-scale, nonpotential magnetic field of the flux rope. The second type of dissipation can be described in term of hyperdiffusion, a type of magnetic diffusion in which the helicity of the mean magnetic field is conserved. The associated heating rate depends on the gradient of the torsion parameter of the mean magnetic field. A simple model of an active region containing a coronal flux rope is constructed. We find that the temperature and density on the axis of the flux rope are lower than in the local surroundings, consistent with observations of coronal cavities. The model requires that the magnetic field in the flux rope is stochastic in nature, with a perpendicular length scale of the magnetic fluctuations of order 1000 km.

The hemispheric pattern of solar filaments is considered using newly-developed simulations of the real photospheric and 3D coronal magnetic fields over a 6-month period, on a global scale. The magnetic field direction in the simulation is compared directly with the chirality of observed filaments, at their observed locations. In our model the coronal field evolves through a continuous sequence of nonlinear force-free equilibria, in response to the changing photospheric boundary conditions and the emergence of new magnetic flux. In total 119 magnetic bipoles with properties matching observed active regions are inserted. These bipoles emerge twisted and inject magnetic helicity into the solar atmosphere. When we choose the sign of this active-region helicity to match that observed in each hemisphere, the model produces the correct chirality for up to 96% of filaments, including exceptions to the hemispheric pattern. If the emerging bipoles have zero helicity, or helicity of the opposite sign, then this percentage is much reduced. In addition, the simulation produces a higher proportion of filaments with the correct chirality after longer times. This indicates that a key element in the evolution of the coronal field is its long-term memory, and the build-up and transport of helicity from low to high latitudes over many months. It highlights the importance of continuous evolution of the coronal field, rather than independent extrapolations at different times. This has significant consequences for future modelling such as that related to the origin and development of coronal mass ejections.

The hemispheric pattern of solar filaments is considered in the context of the global magnetic field of the solar corona. In recent work Mackay and van Ballegooijen have shown how, for a pair of interacting magnetic bipoles, the observed chirality pattern could be explained by the dominant range of bipole tilt angles and helicity in each hemisphere. This study aims to test this earlier result through a direct comparison between theory and observations, using newly-developed simulations of the actual surface and 3D coronal magnetic fields over a 6-month period, on a global scale. In this paper we consider two key components of the study; firstly the observations of filament chirality for the sample of 255 filaments, and secondly our new simulations of the large-scale surface magnetic field. Based on a flux-transport model, these will be used as the lower boundary condition for the future 3D coronal simulations. Our technique differs significantly from those of other authors, where the coronal field is either assumed to be purely potential, or has to be reset back to potential every 27 days in order that the photospheric field remain accurate. In our case we ensure accuracy by the insertion of newly-emerging bipolar active regions, based on observed photospheric synoptic magnetograms. The large-scale surface field is shown to remain accurate over the 6-month period, without any resetting. This new technique will enable future simulations to consider the long-term build-up and transport of helicity and shear in the coronal magnetic field, over many months or years.

We present a series of models for the plasma properties along open magnetic flux tubes rooted in solar coronal holes, streamers, and active regions. These models represent the first self-consistent solutions that combine: (1) chromospheric heating driven by an empirically guided acoustic wave spectrum, (2) coronal heating from Alfven waves that have been partially reflected, then damped by anisotropic turbulent cascade, and (3) solar wind acceleration from gradients of gas pressure, acoustic wave pressure, and Alfven wave pressure. The only input parameters are the photospheric lower boundary conditions for the waves and the radial dependence of the background magnetic field along the flux tube. For a single choice for the photospheric wave properties, our models produce a realistic range of slow and fast solar wind conditions by varying only the coronal magnetic field. Specifically, a 2D model of coronal holes and streamers at solar minimum reproduces the latitudinal bifurcation of slow and fast streams seen by Ulysses. The radial gradient of the Alfven speed affects where the waves are reflected and damped, and thus whether energy is deposited below or above the Parker critical point. As predicted by earlier studies, a larger coronal ``expansion factor'' gives rise to a slower and denser wind, higher temperature at the coronal base, less intense Alfven waves at 1 AU, and correlative trends for commonly measured ratios of ion charge states and FIP-sensitive abundances that are in general agreement with observations. These models offer supporting evidence for the idea that coronal heating and solar wind acceleration (in open magnetic flux tubes) can occur as a result of wave dissipation and turbulent cascade. (abridged abstract)

We present a new model for the coronal structure of rapidly rotating solar-type stars. The presence of prominences trapped in co-rotation 2 to 5 stellar radii above the stellar surface has been taken as evidence that the coronae of these stars must be very extended. The observed surface magnetic fields, however, cannot contain X-ray emitting gas out to these distances. We present an alternative model: that these prominences are trapped in long thin loops embedded not in the X-ray corona, but in the wind. Above coronal helmet streamers, oppositely-directed wind-bearing field lines reconnect to form closed loops which then fill up with gas that was originally part of the wind. We demonstrate that static equilibria exist for these loops at a range of pressures and temperatures. The maximum loop height falls as the rotation rate increases, but rises as the loop temperature decreases. For a solar-mass star with rotation period 0.5 days, whose X-ray corona extends 1stellar radius above the surface, loops at temperatures of 10, 000 K can extend out to 5 stellar radii.

The Chandra X-ray observatory monitored the single cool star, AB Doradus, continuously for a period lasting 88 ksec (1.98 Prot) in 2002 December with the LETG/HRC-S. The X-ray lightcurve shows rotational modulation, with three peaks that repeat in two consecutive rotation cycles. These peaks may indicate the presence of compact emitting regions in the quiescent corona. Centroid shifts as a function of phase in the strongest line profile, O VIII 18.97 A, indicate Doppler rotational velocities with a semi-amplitude of 30 +/- 10 km/s. By taking these diagnostics into account along with constraints on the rotational broadening of line profiles (provided by archival Chandra HETG Fe XVII and FUSE Fe XVIII profile) we can construct a simple model of the X-ray corona that requires two components. One of these components is responsible for 80% of the X-ray emission, and arises from the pole and/or a homogeneously distributed corona. The second component consists of two or three compact active regions that cause modulation in the lightcurve and contribute to the O VIII centroid shifts. These compact regions account for 16% of the emission and are located near the stellar surface with heights of less than 0.3R*. At least one of the compact active regions is located in the partially obscured hemisphere of the inclined star, while one of the other active regions may be located at 40 degrees. High quality X-ray data such as these can test the models of the coronal magnetic field configuration as inferred from magnetic Zeeman Doppler imaging.

We present a comprehensive model of the global properties of Alfven waves in the solar atmosphere and fast solar wind. Linear non-WKB wave transport equations are solved from the photosphere to 4 AU, and for wave periods ranging from 3 seconds to 3 days. We derive a radially varying power spectrum of kinetic and magnetic energy fluctuations for waves propagating in both directions along a superradially expanding magnetic flux tube. This work differs from previous models in 3 major ways. (1) In the chromosphere and low corona, the successive merging of flux tubes on granular and supergranular scales is described using a 2D magnetostatic model of a network element. Below a critical merging height the waves are modeled as thin-tube kink modes, and we assume that all of the kink-mode wave energy is transformed into volume-filling Alfven waves above the merging height. (2) The frequency spectrum of horizontal motions is specified only at the photosphere based on prior analyses of G-band bright point kinematics. Everywhere else the amplitudes of outward and inward propagating waves are computed with no free parameters. We find that the wave amplitudes in the corona agree well with off-limb nonthermal line widths. (3) Nonlinear turbulent damping is applied to the results of the linear model using a phenomenological loss term. A single choice for the normalization of the turbulent outer-scale length produces both the right amount of damping at large distances (to agree with in situ measurements) and the right amount of heating in the extended corona (to agree with empirical wind acceleration models). In the corona, the modeled heating rate differs by more than an order of magnitude from a rate based on isotropic Kolmogorov turbulence.

The Chandra X-ray observatory monitored the single cool star, AB Doradus, continuously for a period lasting 88ksec (1.98 Prot) in 2002 December with the LETG/HRC-S. The X-ray lightcurve shows significant rotational modulation. It can be represented as having a flat level of emission superimposed with bright flaring regions that appear at the same phases in both rotation cycles. Phase-binned OVIII line profiles show centroid shifts that also repeat in consecutive rotation cycles. These Doppler shifts trace a roughly sinusoidal pattern with a a semi-amplitude of 30 +/-10km/s. By taking both the lightcurve and spectral diagnostics into account along with constraints on the rotational broadening of line profiles (provided by archival Chandra HETG FeXVII line profiles) we can construct a simple model of the X-ray corona. The corona can be described as having two components, one component is homogeneously distributed, extending less than 1.75R*; and the other consists of at least two compact emitting regions near the stellar surface. These compact regions account for 16% of the X-ray emission and are likely to be located less than 0.4R* above the stellar surface.

We probe the relationship between surface magnetic fields and the X-ray emitting corona in the rapidly rotating star AB Dor. Circularly polarised spectra have been inverted to produce a surface (photospheric) magnetic field map. This surface map has been extrapolated to model AB Dor's coronal field topology and X-ray light curve. Chandra/LETG light curves of AB Dor from the same epoch show intrinsic variability at the 30% level. Period analysis indicates a fraction of this is due to rotational modulation. We measure velocity shifts in emission line centroids as a function of rotation period and find evidence of rotational modulation (max. vel. ~40+/- 13km/s). This modulation may indicate the presence of a localised X-ray emitting region at mid-to-high latitudes.

A semi-empirical, axisymmetric model of the solar minimum corona is developed by solving the equations for conservation of mass and momentum with prescribed anisotropic temperature distributions. In the high-latitude regions, the proton temperature anisotropy is strong and the associated mirror force plays an important role in driving the fast solar wind; the critical point where the outflow velocity equals the parallel sound speed is reached already at 1.5 Rsun from Sun center. The slow wind arises from a region with open field lines and weak anisotropy surrounding the equatorial streamer belt. The model parameters were chosen to reproduce the observed latitudinal extent of the equatorial streamer in the corona and at large distance from the Sun. We find that the magnetic cusp of the closed-field streamer core lies at about 1.95 Rsun. The transition from fast to slow wind is due to a decrease in temperature anisotropy combined with the non-monotonic behavior of the non-radial expansion factor in flow tubes that pass near the streamer cusp. In the slow wind, the plasma beta is of order unity and the critical point lies at about 5 Rsun, well beyond the magnetic cusp. The predicted outflow velocities are consistent with OVI Doppler dimming measurements from UVCS/SOHO. We also find good agreement with polarized brightness (pB) measurements from LASCO/SOHO and HI Ly-alpha images from UVCS/SOHO.

We present a model of magnetohydrodynamic (MHD) turbulence in the extended solar corona that contains the effects of collisionless dissipation and anisotropic particle heating. Measurements made by UVCS/SOHO have revived interest in the idea that ions are energized by the dissipation of ion cyclotron resonant waves, but such high-frequency (i.e., small wavelength) fluctuations have not been observed. A turbulent cascade is one possible way of generating small-scale fluctuations from a pre-existing population of low-frequency MHD waves. We model this cascade as a combination of advection and diffusion in wavenumber space. The dominant spectral transfer occurs in the direction perpendicular to the background magnetic field. As expected from earlier models, this leads to a highly anisotropic fluctuation spectrum with a rapidly decaying tail in parallel wavenumber. The wave power that decays to high enough frequencies to become ion cyclotron resonant depends on the relative strengths of advection and diffusion in the cascade. For the most realistic values of these parameters, though, there is insufficient power to heat protons and heavy ions. The dominant oblique fluctuations (with dispersion properties of kinetic Alfven waves) undergo Landau damping, which implies strong parallel electron heating. We discuss the probable nonlinear evolution of the electron velocity distributions into parallel beams and discrete phase-space holes (similar to those seen in the terrestrial magnetosphere) which can possibly heat protons via stochastic interactions.

Magnetic elements on the quiet sun are buffeted by convective flows that cause lateral motions on timescales of minutes. The magnetic elements can be observed as bright points (BPs) in the G band at 4305 {\AA}. We present observations of BPs based on a long sequence of G-band images recorded with the Dutch Open Telescope (DOT) and post-processed using speckle masking techniques. From these images we measured the proper motions of isolated BPs and derived the auto-correlation function of their velocity relative to the solar granulation pattern. The accuracy of BP position measurements is estimated to be less than 23 km on the Sun. The rms velocity of BPs (corrected for measurement errors) is about 0.89 km s$^{-1}$, and the correlation time of BP motions is about 60 s. This rms velocity is about 3 times the velocity measured using cork tracking, almost certainly due to the fact that isolated BPs move more rapidly than clusters of BPs. We also searched for evidence of vorticity in the motions of G band BPs.

We re-analyse spectropolarimetric data of AB Dor taken in 1996 December using a surface imaging code that can model the magnetic field of the star as a non-potential current-carrying magnetic field. We find that a non-potential field needs to be introduced in order to fit the dataset at this epoch. This non-potential component takes the form of a strong unidirectional azimuthal field of a similar strength to the radial field. This azimuthal field is concentrated around the boundary of the dark polar spot recovered at the surface of the star using Doppler imaging. As polarization signatures from the center of starspots are suppressed, it is unclear whether or not this non-potential component genuinely represents electric current at the unspotted surface or whether it results from the preferred detection of horizontal field in starspot penumbrae. This model contains 20% more energy than the corresponding potential field model at the surface. This amount of free energy drops to under 1% about 1R* above the photosphere. We use these surface maps to model the coronal structure of the star. The mixed radial polarities at the pole in the surface maps support closed coronal loops in the high latitude regions, indicating that a component of the X-ray emission may originate in this area. Assuming that the field remains closed out to 5R*, we find stable surfaces where prominences may form out to the observed distances using this coronal model.

We present a technique that combines Zeeman Doppler imaging (ZDI) principles with a potential field mapping prescription in order to gain more information about the surface field topology of rapid rotators. This technique is an improvement on standard ZDI, which can sometimes suffer from the suppression of one vector component due to the effects of stellar inclination, poor phase coverage or lack of flux from dark areas on the surface. Defining a relationship beween the different vector components allows information from one component to compensate for reduced information in another. We present simulations demonstrating the capability of this technique and discuss its prospects.

We examine the excitation of oscillations in the magnetic network of the Sun through the footpoint motion of photospheric magnetic flux tubes located in intergranular lanes. The motion is derived from a time series of high-resolution G band and continuum filtergrams using an object-tracking technique. We model the response of the flux tube to the footpoint motion in terms of the Klein-Gordon equation, which is solved analytically as an initial value problem for transverse (kink) waves. We compute the wave energy flux in upward propagating transverse waves. In general we find that the injection of energy into the chromosphere occurs in short-duration pulses, which would lead to a time variability in chromospheric emission that is incompatible with observations. Therefore, we consider the effects of turbulent convective flows on flux tubes in intergranular lanes. The turbulent flows are simulated by adding high-frequency motions (periods 5-50 s) with an amplitude of 1 km s^{-1}. The latter are simulated by adding random velocity fluctuations to the observationally determined velocities. In this case we find that the energy flux is much less intermittent and can in principle carry adequate energy for chromospheric heating.

The interaction of magnetic fields and convection is investigated in the context of the coronal heating problem. We study the motions of photospheric magnetic elements using filtergrams obtained at the Swedish Vacuum Solar Telescope at La Palma. We use potential-field modeling to extrapolate the magnetic and velocity fields to larger height. We find that the velocity in the chromosphere can be locally enhanced at the separatrix surfaces between neighboring flux tubes. The predicted velocities are several km/s, significantly larger than those of the photospheric flux tubes, which may have important implications for coronal heating. s