Astronomical observations often require the detection of faint signals in the presence of noise, and the near-infrared regime is no exception. In particular, where the application has short exposure time constraints, we are frequently and unavoidably limited by the read noise of a system. A recent and revolutionary development in detector technology is that of linear-mode avalanche photodiode (LmAPD) arrays. By the introduction of a signal multiplication region within the device, effective read noise can be reduced to <0.2 e-, enabling the detection of very small signals at frame rates of up to 1 kHz. This is already impacting ground-based astronomy in high-speed applications such as wavefront sensing and fringe tracking, but has not yet been exploited for scientific space missions. We present the current status of a collaboration with Leonardo MW - creators of the 'SAPHIRA' LmAPD array - as we work towards the first in-orbit demonstration of a SAPHIRA device in 'Emu', a hosted payload on the International Space Station. The Emu mission will fully benefit from the 'noiseless' gains offered by LmAPD technology as it produces a time delay integration photometric sky survey at 1.4 microns, using compact readout electronics developed at the Australian National University. This is just one example of a use case that could not be achieved with conventional infrared sensors.

Veloce is an ultra-stable fibre-fed R4 echelle spectrograph for the 3.9 m Anglo-Australian Telescope. The first channel to be commissioned, Veloce 'Rosso', utilises multiple low-cost design innovations to obtain Doppler velocities for Sun-like and M-dwarf stars at <1 m/s precision. The spectrograph has an asymmetric white-pupil format with a 100-mm beam diameter, delivering R>75,000 spectra over a 580-950 nm range for the Rosso channel. Simultaneous calibration is provided by a single-mode pulsed laser frequency comb in tandem with a traditional arc lamp. A bundle of 19 object fibres provides a 2.4" field of view for full sampling of stellar targets from the AAT site. Veloce is housed in dual environmental enclosures that maintain positive air pressure at a stability of +/-0.3 mbar, with a thermal stability of +/-0.01 K on the optical bench. We present a technical overview and early performance data from Australia's next major spectroscopic machine.

We present the first spectroscopic images of solar radio transients from the prototype for the Murchison Widefield Array (MWA), observed on 2010 March 27. Our observations span the instantaneous frequency band 170.9-201.6 MHz. Though our observing period is characterized as a period of `low' to `medium' activity, one broadband emission feature and numerous short-lived, narrowband, non-thermal emission features are evident. Our data represent a significant advance in low radio frequency solar imaging, enabling us to follow the spatial, spectral, and temporal evolution of events simultaneously and in unprecedented detail. The rich variety of features seen here reaffirms the coronal diagnostic capability of low radio frequency emission and provides an early glimpse of the nature of radio observations that will become available as the next generation of low frequency radio interferometers come on-line over the next few years.

The Murchison Wide-field Array (MWA) is a low frequency radio telescope, currently under construction, intended to search for the spectral signature of the epoch of re-ionisation (EOR) and to probe the structure of the solar corona. Sited in Western Australia, the full MWA will comprise 8192 dipoles grouped into 512 tiles, and be capable of imaging the sky south of 40 degree declination, from 80 MHz to 300 MHz with an instantaneous field of view that is tens of degrees wide and a resolution of a few arcminutes. A 32-station prototype of the MWA has been recently commissioned and a set of observations taken that exercise the whole acquisition and processing pipeline. We present Stokes I, Q, and U images from two ~4 hour integrations of a field 20 degrees wide centered on Pictoris A. These images demonstrate the capacity and stability of a real-time calibration and imaging technique employing the weighted addition of warped snapshots to counter extreme wide field imaging distortions.

It is shown that the excellent Murchison Radio-astronomy Observatory site allows the Murchison Widefield Array to employ a simple RFI blanking scheme and still calibrate visibilities and form images in the FM radio band. The techniques described are running autonomously in our calibration and imaging software, which is currently being used to process an FM-band survey of the entire southern sky.

The Murchison Widefield Array (MWA) is a dipole-based aperture array synthesis telescope designed to operate in the 80-300 MHz frequency range. It is capable of a wide range of science investigations, but is initially focused on three key science projects. These are detection and characterization of 3-dimensional brightness temperature fluctuations in the 21cm line of neutral hydrogen during the Epoch of Reionization (EoR) at redshifts from 6 to 10, solar imaging and remote sensing of the inner heliosphere via propagation effects on signals from distant background sources,and high-sensitivity exploration of the variable radio sky. The array design features 8192 dual-polarization broad-band active dipoles, arranged into 512 tiles comprising 16 dipoles each. The tiles are quasi-randomly distributed over an aperture 1.5km in diameter, with a small number of outliers extending to 3km. All tile-tile baselines are correlated in custom FPGA-based hardware, yielding a Nyquist-sampled instantaneous monochromatic uv coverage and unprecedented point spread function (PSF) quality. The correlated data are calibrated in real time using novel position-dependent self-calibration algorithms. The array is located in the Murchison region of outback Western Australia. This region is characterized by extremely low population density and a superbly radio-quiet environment,allowing full exploitation of the instrumental capabilities.

This paper presents the design and science goals for the SkyMapper telescope. SkyMapper is a 1.3m telescope featuring a 5.7 square degree field-of-view Cassegrain imager commissioned for the Australian National University's Research School of Astronomy and Astrophysics. It is located at Siding Spring Observatory, Coonabarabran, NSW, Australia and will see first light in late 2007. The imager possesses 16kx16k 0.5 arcsec pixels. The primary scientific goal of the facility is to perform the Southern Sky Survey, a six colour and multi-epoch (4 hour, 1 day, 1 week, 1 month, 1 year sampling) photometric survey of the southerly 2pi steradians to g~23 mag. The survey will provide photometry to better than 3% global accuracy and astrometry to better than 50 mas. Data will be supplied to the community as part of the Virtual Observatory effort. The survey will take five years to complete.