We report the first-time use of the Aqueye+ and Iqueye instruments to record lunar occultation events. High-time resolution recordings in different filters have been acquired for several occultations taken from January 2016 through January 2018 with Aqueye+ at the Copernicus telescope and Iqueye at the Galileo telescope in Asiago, Italy. Light curves with different time bins were calculated in post-processing and analyzed using a least-square model-dependent method. A total of nine occultation light curves were recorded, including one star for which we could measure for the first time the size of the chromosphere ($\mu$ Psc) and one binary star for which discrepant previous determinations existed in the literature (SAO 92922). A disappearance of Alf Tau shows an angular diameter in good agreement with literature values. The other stars were found to be unresolved, at the milliarcsecond level. We discuss the unique properties of Aqueye+ and Iqueye for this kind of observations, namely the simultaneous measurement in up to four different filters thanks to pupil splitting, and the unprecedented time resolution well exceeding the microsecond level. This latter makes Aqueye+ and Iqueye suitable to observe not just occultations by the Moon, but also much faster events such as e.g. occultations by artificial screens in low orbits. We provide an outlook of future possible observations in this context.

Our team at the INAF-Astronomical Observatory of Padova and the University of Padova is engaged in the design, construction and operations of instruments with very high time accuracy in the optical band for applications to High Time Resolution Astrophysics and Quantum Astronomy. Two instruments were built to perform photon counting with sub-nanosecond temporal accuracy, Aqueye+ and Iqueye. Aqueye+ is regularly mounted at the 1.8m Copernicus telescope in Asiago, while Iqueye was mounted at several 4m class telescopes around the world and is now attached through the Iqueye Fiber Interface at the 1.2m Galileo telescope in Asiago. They are used to perform coordinated high time resolution optical observations and, for the first time ever, experiments of optical intensity interferometry on a baseline of a few kilometers. I will report on recent technological developments and scientific results obtained within the framework of this project.

In the last years we have operated two very similar ultrafast photon counting photometers (Iqueye and Aqueye+) on different telescopes. The absolute time accuracy in time tagging the detected photon with these instruments is of the order of 500 ps for hours of observation, allowing us to obtain, for example, the most accurate ever light curve in visible light of the optical pulsars. Recently we adapted the two photometers for working together on two telescopes at Asiago (Italy), for realizing an Hanbury-Brown and Twiss Intensity Interferometry like experiment with two 3.9 km distant telescopes. In this paper we report about the status of the activity and on the very preliminary results of our first attempt to measure the photon intensity correlation.

Several astronomical surveys aimed at the investigation of the extragalactic components were carried out in order to map systematically the universe and its constituents. An excellent level of detail is needed, and it is possible only using space telescopes or with the application of adaptive optics (AO) techniques for ground-based observatories. By simulating K-band observations of 6000 high-redshift galaxies in the Chandra Deep Field South region, we have already shown how an extremely large telescope can carry out photometric surveys successfully using the Global-MCAO, a natural guide stars based technique that allows the development of extragalactic research, otherwise impracticable without using laser guide stars. As the outcome of the analysis represents an impact science case for the new instruments on upcoming ground-based telescopes, here we show how the investigation of other observed deep fields could profit from such a technique. Further to an overview of the surveys suitable for the proposed approach, we show preliminary estimations both on geometrical (FoV and height) and purely AO perspectives (richness and homogeneity of guide stars in the area) for planned giant telescope.

A robust post processing technique is mandatory to analyse the coronagraphic high contrast imaging data. Angular Differential Imaging (ADI) and Principal Component Analysis (PCA) are the most used approaches to suppress the quasi-static structure in the Point Spread Function (PSF) in order to revealing planets at different separations from the host star. The focus of this work is to apply these two data reduction techniques to obtain the best limit detection for each coronagraphic setting that has been simulated for the SHARK-NIR, a coronagraphic camera that will be implemented at the Large Binocular Telescope (LBT). We investigated different seeing conditions ($0.4"-1"$) for stellar magnitude ranging from R=6 to R=14, with particular care in finding the best compromise between quasi-static speckle subtraction and planet detection.

The wavefront sensors used today at the biggest World's telescopes have either a high dynamic range or a high sensitivity, and they are subject to a linear trade off between these two parameters. A new class of wavefront sensors, the Generalised Optical Differentiation Wavefront Sensors, has been devised, in a way not to undergo this linear trade off and to decouple the dynamic range from the sensitivity. This new class of WFSs is based on the light filtering in the focal plane from a dedicated amplitude filter, which is a hybrid between a linear filter, whose physical dimension is related to the dynamic range, and a step in the amplitude, whose size is related to the sensitivity. We propose here a possible technical implementation of this kind of WFS, making use of a simple holographic diffuser to diffract part of the light in a ring shape around the pin of a pyramid wavefront sensor. In this way, the undiffracted light reaches the pin of the pyramid, contributing to the high sensitivity regime of the WFS, while the diffused light is giving a sort of static modulation of the pyramid, allowing to have some signal even in high turbulence conditions. The holographic diffuser zeroth order efficiency is strictly related to the sensitivity of the WFS, while the diffusing angle of the diffracted light gives the amount of modulation and thus the dynamic range. By properly choosing these two parameters it is possible to build a WFS with high sensitivity and high dynamic range in a static fashion. Introducing dynamic parts in the setup allows to have a set of different diffuser that can be alternated in front of the pyramid, if the change in the seeing conditions requires it.

In the context of ADONI - the ADaptive Optics National laboratory of INAF - we are arranging for a facility, accessible to the AO community, in which visiting multi-purpose instrumentation, e.g. systems and prototypes of innovative AO concepts, may be directly tested on sky. The facility is located at the 182cm Copernico telescope in Asiago, the largest telescope in Italy, at its Coude focus, for which refurbishment activities are carried out, given that this focus was initially foreseen in the design, but never implemented and used till today. The facility hosts a laboratory where specialized visiting AO instrumentation may be properly accommodated on an optical bench for on-sky demonstrations. We present the current status of the facility, describing the opto-mechanical design implemented at the telescope that allows to redirect the light toward the Coude focus, the tests on the opto-mechanics carried on for stability verification, the integration of the optical and mechanical components within the preexisting structure.

It is by now well known that pyramid based wavefront sensors, once in closed loop, have the capability to improve more and more the gain as the reference natural star image size is getting smaller on the pyramid pin. Especially in extreme adaptive optics applications, in order to correct the non-common path aberrations between the scientific and sensing channel, it is common use to inject a certain amount of offset wavefront deformation into the DM(s), departing at the same time the pyramid from the optimal working condition. In this paper we elaborate on the possibility to correct the low order non-common path aberrations at the pyramid wavefront sensor level by means of an adaptive refractive lens placed on the optical path before the pyramid itself, allowing the mitigation of the gain loss.

Since a number of years our group is engaged in the design, construction and operation of instruments with very high time resolution in the optical band for applications to Quantum Astronomy and more conventional Astrophysics. Two instruments were built to perform photon counting with sub-nanosecond temporal accuracy. The first of the two, Aqueye+, is regularly mounted at the 1.8 m Copernicus telescope in Asiago, while the second one, Iqueye, was mounted at the ESO New Technology Telescope in Chile, and at the William Herschel Telescope and Telescopio Nazionale Galileo on the Roque (La Palma, Canary Islands). Both instruments deliver extraordinarily accurate results in optical pulsar timing. Recently, Iqueye was moved to Asiago to be mounted at the 1.2 m Galileo telescope to attempt, for the first time ever, experiments of optical intensity interferometry (a` la Hanbury Brown and Twiss) on a baseline of a few kilometers, together with the Copernicus telescope. This application was one of the original goals for the development of our instrumentation. To carry out these measurements, we are experimenting a new way of coupling the instruments to the telescopes, by means of moderate-aperture, low-optical-attenuation multi-mode optical fibers with a double-clad design. Fibers are housed in dedicated optical interfaces attached to the focus of another instrument of the 1.8 m telescope (Aqueye+) or to the Nasmyth focus of the 1.2 m telescope (Iqueye). This soft-mount solution has the advantage to facilitate the mounting of the photon counters, to keep them under controlled temperature and humidity conditions (reducing potential systematics related to varying ambient conditions), and to mitigate scheduling requirements. Here we will describe the first successful implementation of the Asiago intensity interferometer and future plans for improving it.

The VLT Survey Telescope is a f/5.5 modified Ritchey-Chretien imaging telescope, which is being installed at the ESO-Paranal Observatory. It will provide a one square degree corrected field of view to perform survey-projects in the wavelength range from UV to I band. In this paper we describe the opto-mechanical alignment procedure of the 2.61m primary mirror, the secondary and correctors lenses onto the mechanical structure of the telescope. The alignment procedure does not rely on the mechanical precision of the mirrors. It will be achieved using ad-hoc alignment tools, described in the paper, which allows the spatial determination of optical axes (and focuses where necessary) of the optical components with respect to the axis defined by the rotation of a laser beam mounted on the instrument bearing.

Using an l = 1 blazed fork-hologram at the focal plane of the Asiago 122 cm telescope, we obtained optical vortices from the stellar system Rasalgethi (alpha Herculis) and from the single star Arcturus (alpha Bootis). We have analyzed the structure of the optical vortices obtained from non-monochromatic starlight under very poor seeing conditions using a fast CCD camera to obtain speckle patterns and carry out the lucky imaging technique, alternative to adaptive optics. With the insertion of a red filter and of a Lyot stop we performed l = 1 optical vortex coronography the double star HD74010. The results are in agreement with theory and numerical simulations. Our results open the way to applications of optical vortices to ground based astronomical observations, in particular for coronagraphy with l > 1 masks. No intrinsic orbital angular momentum was detected in the starlight.

We experimentally and numerically tested the separability of two independent equally-luminous monochromatic and white light sources at the diffraction limit, using Optical Vortices (OV), related to the Orbital Angular Momentum (OAM) of light. The diffraction pattern of one of the two sources crosses a phase modifying device (fork-hologram) on its center generating the Laguerre-Gaussian (L-G) transform of an Airy disk. The second source, crossing the fork-hologram in positions different from the optical center, acquires different OAM values and generates non-symmetric L-G patterns. We formulated a criterion, based on the asymmetric intensity distribution of the superposed L-G patterns so created, to resolve the two sources at angular distances much below the Rayleigh criterion. Analogous experiments carried out in white light allow angular resolutions which are still one order of magnitude below the Rayleigh criterion. The use OVs might offer new applications for stellar separation in future space experiments.

We propose to realize an optical device based on the properties of photon orbital angular momentum (POAM) to detect the presence of closeby faint companions in double systems using Laguerre-Gaussian (L-G) modes of the light. We test also the possibility of using L-G modes to build coronagraph mask. We realized in the laboratory a prototype using a blazed l=1 hologram to simulate the separation between two stars, as observed with a telescope, in Laguerre-Gaussian modes.