A crucial part of a space mission for very-long baseline interferometery (VLBI), which is the technique capable of providing the highest resolution images in astronomy, is orbit determination of the mission's space radio telescope(s). In order to successfully detect interference fringes that result from correlation of the signals recorded by a ground-based and a space-borne radio telescope, the propagation delays experienced in the near-Earth space by radio waves emitted by the source and the relativity effects on each telescope's clock need to be evaluated, which requires accurate knowledge of position and velocity of the space radio telescope. In this paper we describe our approach to orbit determination (OD) of the RadioAstron spacecraft of the RadioAstron space-VLBI mission. Determining RadioAstron's orbit is complicated due to several factors: strong solar radiation pressure, a highly eccentric orbit, and frequent orbit perturbations caused by the attitude control system. We show that in order to maintain the OD accuracy required for processing space-VLBI observations at cm-wavelengths it is required to take into account the additional data on thruster firings, reaction wheel rotation rates, and attitude of the spacecraft. We also investigate into using the unique orbit data available only for a space-VLBI spacecraft, i.e. the residual delays and delay rates that result from VLBI data processing, as a means to evaluate the achieved OD accuracy. We present the results of the first experience of OD accuracy evaluation of this kind, using more than 5,000 residual values obtained as a result of space-VLBI observations performed over 7 years of the RadioAstron mission operations.

At present, there is a great worldwide interest in the development of technologies that allow information about the X-ray emission from pulsating cosmic sources to be used to obtain navigation solutions for deep-space spacecraft. In this paper, we illustrate the technique for determining the spatial position of a spacecraft based on the already existing data from the RXTE X-ray space observatory. We show that the spacecraft position toward the Crab pulsar can be determined using an X-ray detector with an effective area of about 0.6 sq.m in the energy range 3-15 keV with an accuracy up to 730 m in a signal integration time of 1000 s. Extending the energy range to 1 keV (the efficiency of the RXTE/PCA spectrometer decreases dramatically at energies below 3 keV) will allow a spacecraft position accuracy of 400-450 m to be achieved at the same effective area and up to 300-350 m when using detectors with an effective area of ~1 sq.m in the energy range 1-10 keV.