sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Tsinganos, K.

Normalized to: Tsinganos, K.

58 article(s) in total. 1941 co-authors, from 1 to 24 common article(s). Median position in authors list is 4,0.

[1]  oai:arXiv.org:1911.08462  [pdf] - 2000383
Metis: the Solar Orbiter visible light and ultraviolet coronal imager
Antonucci, Ester; Romoli, Marco; Andretta, Vincenzo; Fineschi, Silvano; Heinzel, Petr; Moses, J. Daniel; Naletto, Giampiero; Nicolini, Gianalfredo; Spadaro, Daniele; Teriaca, Luca; Berlicki, Arkadiusz; Capobianco, Gerardo; Crescenzio, Giuseppe; Da Deppo, Vania; Focardi, Mauro; Frassetto, Fabio; Heerlein, Klaus; Landini, Federico; Magli, Enrico; Malvezzi, Andrea Marco; Massone, Giuseppe; Melich, Radek; Nicolosi, Piergiorgio; Noci, Giancarlo; Pancrazzi, Maurizio; Pelizzo, Maria G.; Poletto, Luca; Sasso, Clementina; Schühle, Udo; Solanki, Sami K.; Strachan, Leonard; Susino, Roberto; Tondello, Giuseppe; Uslenghi, Michela; Woch, Joachim; Abbo, Lucia; Bemporad, Alessandro; Casti, Marta; Dolei, Sergio; Grimani, Catia; Messerotti, Mauro; Ricci, Marco; Straus, Thomas; Telloni, Daniele; Zuppella, Paola; Auchère, Frederic; Bruno, Roberto; Ciaravella, Angela; Corso, Alain J.; Copano, Miguel Alvarez; Cuadrado, Regina Aznar; D'Amicis, Raffaella; Enge, Reiner; Gravina, Alessio; Jejčič, Sonja; Lamy, Philippe; Lanzafame, Alessandro; Meierdierks, Thimo; Papagiannaki, Ioanna; Peter, Hardi; Rico, German Fernandez; Sertsu, Mewael Giday; Staub, Jan; Tsinganos, Kanaris; Velli, Marco; Ventura, Rita; Verroi, Enrico; Vial, Jean-Claude; Vives, Sebastien; Volpicelli, Antonio; Werner, Stephan; Zerr, Andreas; Negri, Barbara; Castronuovo, Marco; Gabrielli, Alessandro; Bertacin, Roberto; Carpentiero, Rita; Natalucci, Silvia; Marliani, Filippo; Cesa, Marco; Laget, Philippe; Morea, Danilo; Pieraccini, Stefano; Radaelli, Paolo; Sandri, Paolo; Sarra, Paolo; Cesare, Stefano; Del Forno, Felice; Massa, Ernesto; Montabone, Mauro; Mottini, Sergio; Quattropani, Daniele; Schillaci, Tiziano; Boccardo, Roberto; Brando, Rosario; Pandi, Arianna; Baietto, Cristian; Bertone, Riccardo; Alvarez-Herrero, Alberto; Parejo, Pilar García; Cebollero, María; Amoruso, Mauro; Centonze, Vito
Comments:
Submitted: 2019-11-14
Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7 $R_\odot$ to about 9 $R_\odot$. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close vantage point (down to 0.28 AU), achieving out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, will allow longer-term studies of the coronal features. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H I Lyman-{\alpha} line at 121.6 nm. The coronal images in both the UV Lyman-{\alpha} and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 second can be achieved when observing coronal fluctuations in visible light. The Metis measurements will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes acceleration and where the onset and initial propagation of coronal mass ejections take place, thus significantly improving our understanding of the region connecting the Sun to the heliosphere.
[2]  oai:arXiv.org:1909.10757  [pdf] - 1967158
The Hubble Catalog of Variables (HCV)
Comments: 33 pages, 15 figures, 11 tables; accepted in A&A. The HCV is available from the ESA Hubble Science Archive (eHST) (http://archives.esac.esa.int/ehst) at ESAC, and can be easily explored using the HCV Explorer (http://archives.esac.esa.int/hcv-explorer). The HCV is also hosted at STScI in the form of a High Level Science Product (HLSP) in MAST (https://archive.stsci.edu/hlsp/hcv)
Submitted: 2019-09-24
The Hubble Space Telescope (HST) has obtained multi-epoch observations providing the opportunity for a comprehensive variability search aiming to uncover new variables. We have therefore undertaken the task of creating a catalog of variable sources based on version 3 of the Hubble Source Catalog (HSC), which relies on publicly available images obtained with the WFPC2, ACS, and WFC3 instruments onboard the HST. We adopted magnitude-dependent thresholding in median absolute deviation (a robust measure of light curve scatter) combined with sophisticated preprocessing techniques and visual quality control to identify and validate variable sources observed by Hubble with the same instrument and filter combination five or more times. The Hubble Catalog of Variables (HCV) includes 84,428 candidate variable sources (out of 3.7 million HSC sources that were searched for variability) with $V \leq 27$ mag; for 11,115 of them the variability is detected in more than one filter. The data points in the light curves of the variables in the HCV catalog range from five to 120 points (typically having less than ten points); the time baseline ranges from under a day to over 15 years; while $\sim$8% of all variables have amplitudes in excess of 1 mag. Visual inspection performed on a subset of the candidate variables suggests that at least 80% of the candidate variables that passed our automated quality control are true variable sources rather than spurious detections resulting from blending, residual cosmic rays, and calibration errors. The HCV is the first, homogeneous catalog of variable sources created from archival HST data and currently is the deepest catalog of variables available. The catalog includes variable stars in our Galaxy and nearby galaxies, as well as transients and variable active galactic nuclei. (abbreviated)
[3]  oai:arXiv.org:1905.11995  [pdf] - 1892790
Robust Identification of Active Galactic Nuclei through HST Optical Variability in GOODS-S: Comparison with the X-ray and mid-IR Selected Samples
Comments: 22 pages, 23 figures, accepted for publication in MNRAS
Submitted: 2019-05-28
Identifying Active Galactic Nuclei (AGNs) through their X-ray emission is efficient, but necessarily biased against X-ray-faint objects. We aim to characterize this bias by comparing X-ray-selected AGNs to the ones identified through optical variability and mid-IR colours. We present a catalogue of AGNs selected through optical variability using all publicly available z-band Hubble Space Telescope images in the GOODS-South field. For all objects in the catalogue, we compute X-ray upper limits or discuss detections in the deepest available 7 Ms Chandra Deep Field South images and present the Spitzer/IRAC mid-IR colours. For the variability study, we consider only sources observed over at least five epochs and over a time baseline of up to ten years. We adopt the elevated median absolute deviation as a variability indicator robust against individual outlier measurements and identify 113 variability-selected AGN candidates. Among these, 26 have an X-ray counterpart and lie within the conventional AGN area in the FX/Fopt diagram. The candidates with X-ray upper limits are on average optically fainter, have higher redshifts compared to the X-ray detected ones and are consistent with low luminosity AGNs. Out of 41 variable optical sources with IR detections, 13 fulfill the IR AGN colour selection criteria. Our work emphasizes the importance of optical variability surveys for constructing complete samples of AGNs including the ones that remain undetected even by the deepest X-ray and IR surveys.
[4]  oai:arXiv.org:1904.03923  [pdf] - 1882629
Recurrent CME-like Eruptions in Emerging Flux Regions. II. Scaling of Energy and Collision of Successive Eruptions
Comments: 11 pages, 6 Figures
Submitted: 2019-04-08, last modified: 2019-04-09
We present results of three-dimensional MHD simulations of recurrent eruptions in emerging flux regions. The initial numerical setup is the same with the work by Syntelis et al. 2017 (hereafter, Paper I). Here, we perform a parametric study on the magnetic field strength ($B_0$) of the emerging field. The kinetic energy of the produced ejective eruptions in the emerging flux region ranges from $10^{26}-10^{28}$ erg, reaching up to the energies of small Coronal Mass Ejections (CMEs). The kinetic and magnetic energies of the eruptions scale linearly in a logarithmic plot. We find that the eruptions are triggered earlier for higher $B_0$ and that $B_0$ is not directly correlated to the frequency of occurrence of the eruptions. Using large numerical domains, we show the initial stage of the partial merging of two colliding erupting fields. The partial merging occurs partly by the reconnection between the field lines of the following and the leading eruption at the interface between them. We also find that tether-cutting reconnection of the field lines of the leading eruption underneath the following eruption magnetically links the two eruptions. Shocks develop inside the leading eruption during the collision.
[5]  oai:arXiv.org:1809.00495  [pdf] - 1790967
NELIOTA: The wide-field, high-cadence lunar monitoring system at the prime focus of the Kryoneri telescope
Comments: Accepted for publication in A&A
Submitted: 2018-09-03
We present the technical specifications and first results of the ESA-funded, lunar monitoring project "NELIOTA" (NEO Lunar Impacts and Optical TrAnsients) at the National Observatory of Athens, which aims to determine the size-frequency distribution of small Near-Earth Objects (NEOs) via detection of impact flashes on the surface of the Moon. For the purposes of this project a twin camera instrument was specially designed and installed at the 1.2 m Kryoneri telescope utilizing the fast-frame capabilities of scientific Complementary Metal-Oxide Semiconductor detectors (sCMOS). The system provides a wide field-of-view (17.0' $\times$ 14.4') and simultaneous observations in two photometric bands (R and I), reaching limiting magnitudes of 18.7 mag in 10 sec in both bands at a 2.5 signal-to-noise level. This makes it a unique instrument that can be used for the detection of NEO impacts on the Moon, as well as for any astronomy projects that demand high-cadence multicolor observations. The wide field-of-view ensures that a large portion of the Moon is observed, while the simultaneous, high-cadence, monitoring in two photometric bands makes possible, for the first time, the determination of the temperatures of the impacts on the Moon's surface and the validation of the impact flashes from a single site. Considering the varying background level on the Moon's surface we demonstrate that the NELIOTA system can detect NEO impact flashes at a 2.5 signal-to-noise level of ~12.4 mag in the I-band and R-band for observations made at low lunar phases ~0.1. We report 31 NEO impact flashes detected during the first year of the NELIOTA campaign. The faintest flash was at 11.24 mag in the R-band (about two magnitudes fainter than ever observed before) at lunar phase 0.32. Our observations suggest a detection rate of $1.96 \times 10^{-7}$ events $km^{-2} h^{-1}$.
[6]  oai:arXiv.org:1803.04974  [pdf] - 1953317
The Hubble Catalog of Variables (HCV)
Comments: 4 pages, 1 figure, proceedings of the IAU Symposium 339 Southern Horizons in Time-Domain Astronomy, 13-17 November 2017, Stellenbosch, South Africa
Submitted: 2018-03-13
The Hubble Source Catalog (HSC) combines lists of sources detected on images obtained with the WFPC2, ACS and WFC3 instruments aboard the Hubble Space Telescope (HST) available in the Hubble Legacy Archive. The catalog contains time-domain information with about two million of its sources detected with the same instrument and filter in at least five HST visits. The Hubble Catalog of Variables (HCV) project aims to identify HSC sources showing significant brightness variations. A magnitude-dependent threshold in the median absolute deviation of photometric measurements (an outlier-resistant measure of lightcurve scatter) is adopted as the variability-detection statistic. It is supplemented with a cut in $\chi_{\rm red}^2$ that removes sources with large photometric errors. A pre-processing procedure involving bad image identification, outlier rejection and computation of local magnitude zero-point corrections is applied to HSC lightcurves before computing the variability detection statistic. About 52000 HSC sources are identified as candidate variables, among which 7800 show variability in more than one filter. Visual inspection suggests that $\sim 70\%$ of the candidates detected in multiple filters are true variables while the remaining $\sim 30\%$ are sources with aperture photometry corrupted by blending, imaging artifacts or image processing anomalies. The candidate variables have AB magnitudes in the range 15-27$^{m}$ with the median 22$^{m}$. Among them are the stars in our own and nearby galaxies as well as active galactic nuclei.
[7]  oai:arXiv.org:1712.05589  [pdf] - 1682526
Nonradial and nonpolytropic astrophysical outflows. X. Relativistic MHD rotating spine jets in Kerr metric
Comments: Accepted for publication in Astronomy and Astrophysics
Submitted: 2017-12-15
High resolution radio imaging of AGN have revealed that some sources present motion of superluminal knots and transverse stratification of their jet. Recent observational projects have provided new observational constraints on the central region of rotating black holes in AGN, suggesting that there is an inner- or spine-jet surrounded by a disk wind. This relativistic spine-jet is likely to be composed of electron - positron pairs extracting energy from the black hole. In this article we present an extension and generalization to relativistic jets in Kerr metric of the meridional self similar mechanism. We aim at modeling the inner spine-jet of AGN as the relativistic light outflow emerging from a spherical corona surrounding a Kerr black hole. The model is built by expanding the metric and the forces with colatitude to first order in the magnetic flux function. Conversely to previous models, effects of the light cylinder are not neglected. Solutions with high Lorentz factor are obtained and provide spine-jet models up to the polar axis. As in previous publications, we calculate the magnetic collimation efficiency parameter, which measures the variation of the available energy across the field lines. This collimation efficiency is an integral of the model, generalizing to Kerr metric the classical magnetic rotator efficiency criterion. We study the variation of the magnetic efficiency and acceleration with the spin of the black hole and show their high sensitivity to this integral. These new solutions model collimated or radial, relativistic or ultra-relativistic outflows. We discuss the relevance of our solutions to model the M87 spine-jet. We study the efficiency of the central black hole spin to collimate a spine-jet and show that the jet power is of the same order with that determined by numerical simulations.
[8]  oai:arXiv.org:1711.11491  [pdf] - 1595881
Hubble Catalog of Variables
Comments: 4 pages, 1 figure, to appear in the proceeding of "Stellar Populations and the Distance Scale", Joseph Jensen (eds), ASPCS
Submitted: 2017-11-30
The Hubble Catalog of Variables (HCV) project aims to identify the variable sources in the Hubble Source Catalog (HSC), which includes about 92 million objects with over 300 million measurements detected by the WFPC2, ACS and WFC3 cameras on board of the Hubble Space Telescope (HST), by using an automated pipeline containing a set of detection and validation algorithms. All the HSC sources with more than a predefined number of measurements in a single filter/instrument combination are pre-processed to correct systematic effect and to remove the bad measurements. The corrected data are used to compute a number of variability indexes to determine the variability status of each source. The final variable source catalog will contain variables stars, active galactic nuclei (AGNs), supernovae (SNs) or even new types of variables, reaching an unprecedented depth (V$\leq$27 mag). At the end of the project, the first release of the HCV will be available at the Mikulski Archive for Space Telescopes (MAST) and the ESA Hubble Science Archives. The HCV pipeline will be deployed at the Space Telescope Science Institute (STScI) so that an updated HCV may be generated following future releases of HSC.
[9]  oai:arXiv.org:1711.10249  [pdf] - 1598293
Recurrent CME-like eruptions in emerging flux regions. I. On the mechanism of eruptions
Comments: 15 pages, 13 figues
Submitted: 2017-11-28
We report on three-dimensional (3D) Magnetohydrodynamic (MHD) simulations of recurrent eruptions in emerging flux regions. We find that reconnection of sheared fieldlines, along the polarity inversion line of an emerging bipolar region, leads to the formation of a new magnetic structure, which adopts the shape of a magnetic flux rope during its rising motion. Initially, the flux rope undergoes a slow-rise phase and, eventually, it experiences a fast-rise phase and ejective eruption towards the outer solar atmosphere. In total, four eruptions occur during the evolution of the system. For the first eruption, our analysis indicates that the torus instability initiates the eruption and that tether-cutting reconnection of the fieldlines, which envelope the flux rope, triggers the rapid acceleration of the eruptive field. For the following eruptions, we conjecture that it is the interplay between tether-cutting reconnection and torus instability, which causes the onset of the various phases. We show the 3D shape of the erupting fields, focusing more on how magnetic fieldlines reconnect during the eruptions. We find that when the envelope fieldlines reconnect mainly with themselves, hot and dense plasma is transferred closer to the core of the erupting flux rope. The same area appears to be cooler and less dense when the envelope fieldlines reconnect with neighboring sheared fieldlines. The plasma density and temperature distribution, together with the rising speeds, the energies and the size of the erupting fields indicate that they may account for small-scale (mini) Coronal Mass Ejections (CMEs).
[10]  oai:arXiv.org:1703.02038  [pdf] - 1581775
The Hubble Catalog of Variables
Comments: 5 pages, 3 figures, 1 table, proceedings of the 22nd Los Alamos Stellar Pulsation Conference "Wide-field variability surveys: a 21st-century perspective" held in San Pedro de Atacama, Chile, Nov. 28-Dec. 2, 2016
Submitted: 2017-03-06, last modified: 2017-07-03
We aim to construct an exceptionally deep (V ~< 27) catalog of variable objects in selected Galactic and extragalactic fields visited multiple times by the Hubble Space Telescope (HST). While HST observations of some of these fields were searched for specific types of variables before (most notably, the extragalactic Cepheids), we attempt a systematic study of the population of variable objects of all types at the magnitude range not easily accessible with ground-based telescopes. The variability timescales that can be probed range from hours to years depending on how often a particular field has been visited. For source extraction and cross-matching of sources between visits we rely on the Hubble Source Catalog which includes 10^7 objects detected with WFPC2, ACS, and WFC3 HST instruments. The lightcurves extracted from the HSC are corrected for systematic effects by applying local zero-point corrections and are screened for bad measurements. For each lightcurve we compute variability indices sensitive to a broad range of variability types. The indices characterize the overall lightcurve scatter and smoothness. Candidate variables are selected as having variability index values significantly higher than expected for objects of similar brightness in the given set of observations. The Hubble Catalog of Variables will be released in 2018.
[11]  oai:arXiv.org:1703.00258  [pdf] - 1581697
The Hubble Catalog of Variables
Comments: 4 pages, 5 figures, To appear in the conference proceedings of the IAU Symposium 325 AstroInformatics (2016 October 20-24, Sorrento, Italy)
Submitted: 2017-03-01
The Hubble Catalog of Variables (HCV) is a 3 year ESA funded project that aims to develop a set of algorithms to identify variables among the sources included in the Hubble Source Catalog (HSC) and produce the HCV. We will process all HSC sources with more than a predefined number of measurements in a single filter/instrument combination and compute a range of lightcurve features to determine the variability status of each source. At the end of the project, the first release of the Hubble Catalog of Variables will be made available at the Mikulski Archive for Space Telescopes (MAST) and the ESA Science Archives. The variability detection pipeline will be implemented at the Space Telescope Science Institute (STScI) so that updated versions of the HCV may be created following the future releases of the HSC.
[12]  oai:arXiv.org:1610.05151  [pdf] - 1497663
Contributions of the Cherenkov Telescope Array (CTA) to the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016)
Consortium, The CTA; :; Abchiche, A.; Abeysekara, U.; Abril, Ó.; Acero, F.; Acharya, B. S.; Adams, C.; Agnetta, G.; Aharonian, F.; Akhperjanian, A.; Albert, A.; Alcubierre, M.; Alfaro, J.; Alfaro, R.; Allafort, A. J.; Aloisio, R.; Amans, J. -P.; Amato, E.; Ambrogi, L.; Ambrosi, G.; Ambrosio, M.; Anderson, J.; Anduze, M.; Angüner, E. O.; Antolini, E.; Antonelli, L. A.; Antonucci, M.; Antonuccio, V.; Antoranz, P.; Aramo, C.; Aravantinos, A.; Araya, M.; Arcaro, C.; Arezki, B.; Argan, A.; Armstrong, T.; Arqueros, F.; Arrabito, L.; Arrieta, M.; Asano, K.; Ashley, M.; Aubert, P.; Singh, C. B.; Babic, A.; Backes, M.; Bais, A.; Bajtlik, S.; Balazs, C.; Balbo, M.; Balis, D.; Balkowski, C.; Ballester, O.; Ballet, J.; Balzer, A.; Bamba, A.; Bandiera, R.; Barber, A.; Barbier, C.; Barcelo, M.; Barkov, M.; Barnacka, A.; de Almeida, U. Barres; Barrio, J. A.; Basso, S.; Bastieri, D.; Bauer, C.; Becciani, U.; Becherini, Y.; Tjus, J. Becker; Beckmann, V.; Bednarek, W.; Benbow, W.; Ventura, D. Benedico; Berdugo, J.; Berge, D.; Bernardini, E.; Bernardini, M. G.; Bernhard, S.; Bernlöhr, K.; Bertucci, B.; Besel, M. -A.; Beshley, V.; Bhatt, N.; Bhattacharjee, P.; Bhattacharyya, W.; Bhattachryya, S.; Biasuzzi, B.; Bicknell, G.; Bigongiari, C.; Biland, A.; Bilinsky, A.; Bilnik, W.; Biondo, B.; Bird, R.; Bird, T.; Bissaldi, E.; Bitossi, M.; Blanch, O.; Blasi, P.; Blazek, J.; Bockermann, C.; Boehm, C.; Bogacz, L.; Bogdan, M.; Bohacova, M.; Boisson, C.; Boix, J.; Bolmont, J.; Bonanno, G.; Bonardi, A.; Bonavolontà, C.; Bonifacio, P.; Bonnarel, F.; Bonnoli, G.; Borkowski, J.; Bose, R.; Bosnjak, Z.; Böttcher, M.; Bousquet, J. -J.; Boutonnet, C.; Bouyjou, F.; Bowman, L.; Braiding, C.; Brantseg, T.; Brau-Nogué, S.; Bregeon, J.; Briggs, M.; Brigida, M.; Bringmann, T.; Brisken, W.; Bristow, D.; Britto, R.; Brocato, E.; Bron, S.; Brook, P.; Brooks, W.; Brown, A. M.; Brügge, K.; Brun, F.; Brun, P.; Brun, P.; Brunetti, G.; Brunetti, L.; Bruno, P.; Buanes, T.; Bucciantini, N.; Buchholtz, G.; Buckley, J.; Bugaev, V.; Bühler, R.; Bulgarelli, A.; Bulik, T.; Burton, M.; Burtovoi, A.; Busetto, G.; Buson, S.; Buss, J.; Byrum, K.; Cadoux, F.; Tovar, J. Calvo; Cameron, R.; Canelli, F.; Canestrari, R.; Capalbi, M.; Capasso, M.; Capobianco, G.; Caproni, A.; Caraveo, P.; Cardenzana, J.; Cardillo, M.; Carius, S.; Carlile, C.; Carosi, A.; Carosi, R.; Carquín, E.; Carr, J.; Carroll, M.; Carter, J.; Carton, P. -H.; Casandjian, J. -M.; Casanova, S.; Casanova, S.; Cascone, E.; Casiraghi, M.; Castellina, A.; Mora, J. Castroviejo; Catalani, F.; Catalano, O.; Catalanotti, S.; Cauz, D.; Cavazzani, S.; Cerchiara, P.; Chabanne, E.; Chadwick, P.; Chaleil, T.; Champion, C.; Chatterjee, A.; Chaty, S.; Chaves, R.; Chen, A.; Chen, X.; Chen, X.; Cheng, K.; Chernyakova, M.; Chiappetti, L.; Chikawa, M.; Chinn, D.; Chitnis, V. R.; Cho, N.; Christov, A.; Chudoba, J.; Cieślar, M.; Ciocci, M. A.; Clay, R.; Colafrancesco, S.; Colin, P.; Colley, J. -M.; Colombo, E.; Colome, J.; Colonges, S.; Conforti, V.; Connaughton, V.; Connell, S.; Conrad, J.; Contreras, J. L.; Coppi, P.; Corbel, S.; Coridian, J.; Cornat, R.; Corona, P.; Corti, D.; Cortina, J.; Cossio, L.; Costa, A.; Costantini, H.; Cotter, G.; Courty, B.; Covino, S.; Covone, G.; Crimi, G.; Criswell, S. J.; Crocker, R.; Croston, J.; Cuadra, J.; Cumani, P.; Cusumano, G.; Da Vela, P.; Dale, Ø.; D'Ammando, F.; Dang, D.; Dang, V. T.; Dangeon, L.; Daniel, M.; Davids, I.; Davids, I.; Dawson, B.; Dazzi, F.; Costa, B. de Aguiar; De Angelis, A.; Cardoso, R. F. de Araujo; De Caprio, V.; Anjos, R. de Cássia dos; De Cesare, G.; De Franco, A.; De Frondat, F.; Pino, E. M. de Gouveia Dal; de la Calle, I.; De Lisio, C.; Lopez, R. de los Reyes; De Lotto, B.; De Luca, A.; Neto, J. R. T. de Mello; de Naurois, M.; Wilhelmi, E. de Oña; De Palma, F.; De Persio, F.; de Souza, V.; Decock, G.; Decock, J.; Deil, C.; Del Santo, M.; Delagnes, E.; Deleglise, G.; Delgado, C.; Delgado, J.; della Volpe, D.; Deloye, P.; Detournay, M.; Dettlaff, A.; Devin, J.; Di Girolamo, T.; Di Giulio, C.; Di Paola, A.; Di Pierro, F.; Diaz, M. A.; Díaz, C.; Dib, C.; Dick, J.; Dickinson, H.; Diebold, S.; Digel, S.; Dipold, J.; Disset, G.; Distefano, A.; Djannati-Ataï, A.; Doert, M.; Dohmke, M.; Domínguez, A.; Dominik, N.; Dominique, J. -L.; Prester, D. Dominis; Donat, A.; Donnarumma, I.; Dorner, D.; Doro, M.; Dournaux, J. -L.; Downes, T.; Doyle, K.; Drake, G.; Drappeau, S.; Drass, H.; Dravins, D.; Drury, L.; Dubus, G.; Ducci, L.; Dumas, D.; Morå, K. Dundas; Durand, D.; D'Urso, D.; Dwarkadas, V.; Dyks, J.; Dyrda, M.; Ebr, J.; Edy, E.; Egberts, K.; Eger, P.; Egorov, A.; Einecke, S.; Eisch, J.; Eisenkolb, F.; Eleftheriadis, C.; Elsaesser, D.; Elsässer, D.; Emmanoulopoulos, D.; Engelbrecht, C.; Engelhaupt, D.; Ernenwein, J. -P.; Escarate, P.; Eschbach, S.; Espinoza, C.; Evans, P.; Fairbairn, M.; Falceta-Goncalves, D.; Falcone, A.; Ramazani, V. Fallah; Fantinel, D.; Farakos, K.; Farnier, C.; Farrell, E.; Fasola, G.; Favre, Y.; Fede, E.; Fedora, R.; Fedorova, E.; Fegan, S.; Ferenc, D.; Fernandez-Alonso, M.; Fernández-Barral, A.; Ferrand, G.; Ferreira, O.; Fesquet, M.; Fetfatzis, P.; Fiandrini, E.; Fiasson, A.; Filipčič, A.; Filipovic, M.; Fink, D.; Finley, C.; Finley, J. P.; Finoguenov, A.; Fioretti, V.; Fiorini, M.; Fleischhack, H.; Flores, H.; Florin, D.; Föhr, C.; Fokitis, E.; Fonseca, M. V.; Font, L.; Fontaine, G.; Fontes, B.; Fornasa, M.; Fornasa, M.; Förster, A.; Fortin, P.; Fortson, L.; Fouque, N.; Franckowiak, A.; Franckowiak, A.; Franco, F. J.; Albuquerque, I. Freire Mota; Coromina, L. Freixas; Fresnillo, L.; Fruck, C.; Fuessling, M.; Fugazza, D.; Fujita, Y.; Fukami, S.; Fukazawa, Y.; Fukuda, T.; Fukui, Y.; Funk, S.; Furniss, A.; Gäbele, W.; Gabici, S.; Gadola, A.; Galindo, D.; Gall, D. D.; Gallant, Y.; Galloway, D.; Gallozzi, S.; Galvez, J. A.; Gao, S.; Garcia, A.; Garcia, B.; Gil, R. García; López, R. Garcia; Garczarczyk, M.; Gardiol, D.; Gargano, C.; Gargano, F.; Garozzo, S.; Garrecht, F.; Garrido, L.; Garrido-Ruiz, M.; Gascon, D.; Gaskins, J.; Gaudemard, J.; Gaug, M.; Gaweda, J.; Gebhardt, B.; Gebyehu, M.; Geffroy, N.; Genolini, B.; Gerard, L.; Ghalumyan, A.; Ghedina, A.; Ghislain, P.; Giammaria, P.; Giannakaki, E.; Gianotti, F.; Giarrusso, S.; Giavitto, G.; Giebels, B.; Gieras, T.; Giglietto, N.; Gika, V.; Gimenes, R.; Giomi, M.; Giommi, P.; Giordano, F.; Giovannini, G.; Girardot, P.; Giro, E.; Giroletti, M.; Gironnet, J.; Giuliani, A.; Glicenstein, J. -F.; Gnatyk, R.; Godinovic, N.; Goldoni, P.; Gomez, G.; Gonzalez, M. M.; González, A.; Gora, D.; Gothe, K. S.; Gotz, D.; Goullon, J.; Grabarczyk, T.; Graciani, R.; Graham, J.; Grandi, P.; Granot, J.; Grasseau, G.; Gredig, R.; Green, A. J.; Green, A. M.; Greenshaw, T.; Grenier, I.; Griffiths, S.; Grillo, A.; Grondin, M. -H.; Grube, J.; Grudzinska, M.; Grygorczuk, J.; Guarino, V.; Guberman, D.; Gunji, S.; Gyuk, G.; Hadasch, D.; Hagedorn, A.; Hagge, L.; Hahn, J.; Hakobyan, H.; Hara, S.; Hardcastle, M. J.; Hassan, T.; Hatanaka, K.; Haubold, T.; Haupt, A.; Hayakawa, T.; Hayashida, M.; Heller, M.; Heller, R.; Helo, J. C.; Henault, F.; Henri, G.; Hermann, G.; Hermel, R.; Llorente, J. Herrera; Llorente, J. Herrera; Herrero, A.; Hervet, O.; Hidaka, N.; Hinton, J.; Hirai, W.; Hirotani, K.; Hnatyk, B.; Hoang, J.; Hoffmann, D.; Hofmann, W.; Holch, T.; Holder, J.; Hooper, S.; Horan, D.; Hörandel, J.; Hörbe, M.; Horns, D.; Horvath, P.; Hose, J.; Houles, J.; Hovatta, T.; Hrabovsky, M.; Hrupec, D.; Huet, J. -M.; Huetten, M.; Hughes, G.; Hui, D.; Humensky, T. B.; Hussein, M.; Iacovacci, M.; Ibarra, A.; Ikeno, Y.; Illa, J. M.; Impiombato, D.; Inada, T.; Incorvaia, S.; Infante, L.; Inome, Y.; Inoue, S.; Inoue, T.; Inoue, Y.; Iocco, F.; Ioka, K.; Iori, M.; Ishio, K.; Ishio, K.; Israel, G. L.; Iwamura, Y.; Jablonski, C.; Jacholkowska, A.; Jacquemier, J.; Jamrozy, M.; Janecek, P.; Janiak, M.; Jankowsky, D.; Jankowsky, F.; Jean, P.; Jegouzo, I.; Jenke, P.; Jimenez, J. J.; Jingo, M.; Jingo, M.; Jocou, L.; Jogler, T.; Johnson, C. A.; Jones, M.; Josselin, M.; Journet, L.; Jung, I.; Kaaret, P.; Kagaya, M.; Kakuwa, J.; Kalekin, O.; Kalkuhl, C.; Kamon, H.; Kankanyan, R.; Karastergiou, A.; Kärcher, K.; Karczewski, M.; Karkar, S.; Karn, P.; Kasperek, J.; Katagiri, H.; Kataoka, J.; Katarzyński, K.; Kato, S.; Katz, U.; Kawanaka, N.; Kaye, L.; Kazanas, D.; Kelley-Hoskins, N.; Kersten, J.; Khélifi, B.; Kieda, D. B.; Kihm, T.; Kimeswenger, S.; Kisaka, S.; Kishida, S.; Kissmann, R.; Klepser, S.; Kluźniak, W.; Knapen, J.; Knapp, J.; Knödlseder, J.; Koch, B.; Köck, F.; Kocot, J.; Kohri, K.; Kokkotas, K.; Kokkotas, K.; Kolitzus, D.; Komin, N.; Kominis, I.; Kong, A.; Konno, Y.; Kosack, K.; Koss, G.; Kossatz, M.; Kowal, G.; Koyama, S.; Kozioł, J.; Kraus, M.; Krause, J.; Krause, M.; Krawzcynski, H.; Krennrich, F.; Kretzschmann, A.; Kruger, P.; Kubo, H.; Kudryavtsev, V.; Mezek, G. Kukec; Kuklis, M.; Kuroda, H.; Kushida, J.; La Barbera, A.; La Palombara, N.; La Parola, V.; La Rosa, G.; Laffon, H.; Lahmann, R.; Lakicevic, M.; Lalik, K.; Lamanna, G.; Landriu, D.; Landt, H.; Lang, R. G.; Lapington, J.; Laporte, P.; Fèvre, J. -P. Le; Flour, T. Le; Sidaner, P. Le; Lee, S. -H.; Lee, W. H.; Lees, J. -P.; Lefaucheur, J.; Leffhalm, K.; Leich, H.; de Oliveira, M. A. Leigui; Lelas, D.; Lemière, A.; Lemoine-Goumard, M.; Lenain, J. -P.; Leonard, R.; Leoni, R.; Lessio, L.; Leto, G.; Leveque, A.; Lieunard, B.; Limon, M.; Lindemann, R.; Lindfors, E.; Linhoff, L.; Liolios, A.; Lipniacka, A.; Lockart, H.; Lohse, T.; Łokas, E.; Lombardi, S.; Longo, F.; Lopatin, A.; Lopez, M.; Loreggia, D.; Louge, T.; Louis, F.; Louys, M.; Lucarelli, F.; Lucchesi, D.; Lüdecke, H.; Luigi, T.; Luque-Escamilla, P. L.; Lyard, E.; Maccarone, M. C.; Maccarone, T.; Maccarone, T. J.; Mach, E.; Madejski, G. M.; Madonna, A.; Magniette, F.; Magniez, A.; Mahabir, M.; Maier, G.; Majumdar, P.; Majumdar, P.; Makariev, M.; Malaguti, G.; Malaspina, G.; Mallot, A. K.; Malouf, A.; Maltezos, S.; Malyshev, D.; Mancilla, A.; Mandat, D.; Maneva, G.; Manganaro, M.; Mangano, S.; Manigot, P.; Mankushiyil, N.; Mannheim, K.; Maragos, N.; Marano, D.; Marchegiani, P.; Marcomini, J. A.; Marcowith, A.; Mariotti, M.; Marisaldi, M.; Markoff, S.; Martens, C.; Martí, J.; Martin, J. -M.; Martin, L.; Martin, P.; Martínez, G.; Martínez, M.; Martínez, O.; Martynyuk-Lototskyy, K.; Marx, R.; Masetti, N.; Massimino, P.; Mastichiadis, A.; Mastroianni, S.; Mastropietro, M.; Masuda, S.; Matsumoto, H.; Matsuoka, S.; Matthews, N.; Mattiazzo, S.; Maurin, G.; Maxted, N.; Maxted, N.; Maya, J.; Mayer, M.; Mazin, D.; Mazziotta, M. N.; Comb, L. Mc; McCubbin, N.; McHardy, I.; Medina, C.; Mehrez, F.; Melioli, C.; Melkumyan, D.; Melse, T.; Mereghetti, S.; Merk, M.; Mertsch, P.; Meunier, J. -L.; Meures, T.; Meyer, M.; Meyrelles, J. L.; Miccichè, A.; Michael, T.; Michałowski, J.; Mientjes, P.; Mievre, I.; Mihailidis, A.; Miller, J.; Mineo, T.; Minuti, M.; Mirabal, N.; Mirabel, F.; Miranda, J. M.; Mirzoyan, R.; Mitchell, A.; Mizuno, T.; Moderski, R.; Mognet, I.; Mohammed, M.; Moharana, R.; Mohrmann, L.; Molinari, E.; Molyneux, P.; Monmarthe, E.; Monnier, G.; Montaruli, T.; Monte, C.; Monteiro, I.; Mooney, D.; Moore, P.; Moralejo, A.; Morello, C.; Moretti, E.; Mori, K.; Morris, P.; Morselli, A.; Moscato, F.; Motohashi, D.; Mottez, F.; Moudden, Y.; Moulin, E.; Mueller, S.; Mukherjee, R.; Munar, P.; Munari, M.; Mundell, C.; Mundet, J.; Muraishi, H.; Murase, K.; Muronga, A.; Murphy, A.; Nagar, N.; Nagataki, S.; Nagayoshi, T.; Nagesh, B. K.; Naito, T.; Nakajima, D.; Nakajima, D.; Nakamori, T.; Nakayama, K.; Nanni, J.; Naumann, D.; Nayman, P.; Nellen, L.; Nemmen, R.; Neronov, A.; Neyroud, N.; Nguyen, T.; Nguyen, T. T.; Trung, T. Nguyen; Nicastro, L.; Nicolau-Kukliński, J.; Niederwanger, F.; Niedźwiecki, A.; Niemiec, J.; Nieto, D.; Nievas-Rosillo, M.; Nikolaidis, A.; Nikołajuk, M.; Nishijima, K.; Nishikawa, K. -I.; Nishiyama, G.; Noda, K.; Noda, K.; Nogues, L.; Nolan, S.; Northrop, R.; Nosek, D.; Nöthe, M.; Novosyadlyj, B.; Nozka, L.; Nunio, F.; Oakes, L.; O'Brien, P.; Ocampo, C.; Occhipinti, G.; Ochoa, J. P.; de Bhroithe, A. OFaolain; Oger, R.; Ohira, Y.; Ohishi, M.; Ohm, S.; Ohoka, H.; Okazaki, N.; Okumura, A.; Olive, J. -F.; Olszowski, D.; Ong, R. A.; Ono, S.; Orienti, M.; Orito, R.; Orlati, A.; Osborne, J.; Ostrowski, M.; Ottaway, D.; Otte, N.; Öttl, S.; Ovcharov, E.; Oya, I.; Ozieblo, A.; Padovani, M.; Pagano, I.; Paiano, S.; Paizis, A.; Palacio, J.; Palatka, M.; Pallotta, J.; Panagiotidis, K.; Panazol, J. -L.; Paneque, D.; Panter, M.; Panzera, M. R.; Paoletti, R.; Paolillo, M.; Papayannis, A.; Papyan, G.; Paravac, A.; Paredes, J. M.; Pareschi, G.; Park, N.; Parsons, D.; Paśko, P.; Pavy, S.; Pech, M.; Peck, A.; Pedaletti, G.; Pe'er, A.; Peet, S.; Pelat, D.; Pepato, A.; Perez, M. d. C.; Perri, L.; Perri, M.; Persic, M.; Persic, M.; Petrashyk, A.; Petrucci, P. -O.; Petruk, O.; Peyaud, B.; Pfeifer, M.; Pfeiffer, G.; Piano, G.; Pieloth, D.; Pierre, E.; de Pinho, F. Pinto; García, C. Pio; Piret, Y.; Pisarski, A.; Pita, S.; Platos, Ł.; Platzer, R.; Podkladkin, S.; Pogosyan, L.; Pohl, M.; Poinsignon, P.; Pollo, A.; Porcelli, A.; Porthault, J.; Potter, W.; Poulios, S.; Poutanen, J.; Prandini, E.; Prandini, E.; Prast, J.; Pressard, K.; Principe, G.; Profeti, F.; Prokhorov, D.; Prokoph, H.; Prouza, M.; Pruchniewicz, R.; Pruteanu, G.; Pueschel, E.; Pühlhofer, G.; Puljak, I.; Punch, M.; Pürckhauer, S.; Pyzioł, R.; Queiroz, F.; Quel, E. J.; Quinn, J.; Quirrenbach, A.; Rafighi, I.; Rainò, S.; Rajda, P. J.; Rameez, M.; Rando, R.; Rannot, R. C.; Rataj, M.; Ravel, T.; Razzaque, S.; Reardon, P.; Reichardt, I.; Reimann, O.; Reimer, A.; Reimer, O.; Reisenegger, A.; Renaud, M.; Renner, S.; Reposeur, T.; Reville, B.; Rezaeian, A.; Rhode, W.; Ribeiro, D.; Prado, R. Ribeiro; Ribó, M.; Richards, G.; Richer, M. G.; Richtler, T.; Rico, J.; Ridky, J.; Rieger, F.; Riquelme, M.; Ristori, P. R.; Rivoire, S.; Rizi, V.; Roache, E.; Rodriguez, J.; Fernandez, G. Rodriguez; Vázquez, J. J. Rodríguez; Rojas, G.; Romano, P.; Romeo, G.; Roncadelli, M.; Rosado, J.; Rose, J.; Rosen, S.; Lees, S. Rosier; Ross, D.; Rouaix, G.; Rousselle, J.; Rovero, A. C.; Rowell, G.; Roy, F.; Royer, S.; Rubini, A.; Rudak, B.; Rugliancich, A.; Rujopakarn, W.; Rulten, C.; Rupiński, M.; Russo, F.; Russo, F.; Rutkowski, K.; Saavedra, O.; Sabatini, S.; Sacco, B.; Sadeh, I.; Saemann, E. O.; Safi-Harb, S.; Saggion, A.; Sahakian, V.; Saito, T.; Sakaki, N.; Sakurai, S.; Salamon, A.; Salega, M.; Salek, D.; Greus, F. Salesa; Salgado, J.; Salina, G.; Salinas, L.; Salini, A.; Sanchez, D.; Sanchez-Conde, M.; Sandaker, H.; Sandoval, A.; Sangiorgi, P.; Sanguillon, M.; Sano, H.; Santander, M.; Santangelo, A.; Santos, E. M.; Santos-Lima, R.; Sanuy, A.; Sapozhnikov, L.; Sarkar, S.; Satalecka, K.; Satalecka, K.; Sato, Y.; Savalle, R.; Sawada, M.; Sayède, F.; Schanne, S.; Schanz, T.; Schioppa, E. J.; Schlenstedt, S.; Schmid, J.; Schmidt, T.; Schmoll, J.; Schneider, M.; Schoorlemmer, H.; Schovanek, P.; Schubert, A.; Schullian, E. -M.; Schultze, J.; Schulz, A.; Schulz, S.; Schure, K.; Schussler, F.; Schwab, T.; Schwanke, U.; Schwarz, J.; Schweizer, T.; Schwemmer, S.; Schwendicke, U.; Schwerdt, C.; Sciacca, E.; Scuderi, S.; Segreto, A.; Seiradakis, J. -H.; Sembroski, G. H.; Semikoz, D.; Sergijenko, O.; Serre, N.; Servillat, M.; Seweryn, K.; Shafi, N.; Shalchi, A.; Sharma, M.; Shayduk, M.; Shellard, R. C.; Shibata, T.; Shigenaka, A.; Shilon, I.; Shum, E.; Sidoli, L.; Sidz, M.; Sieiro, J.; Siejkowski, H.; Silk, J.; Sillanpää, A.; Simone, D.; Simpson, H.; Singh, B. B.; Sinha, A.; Sironi, G.; Sitarek, J.; Sizun, P.; Sliusar, V.; Sliusar, V.; Smith, A.; Sobczyńska, D.; Sol, H.; Sottile, G.; Sowiński, M.; Spanier, F.; Spengler, G.; Spiga, R.; Stadler, R.; Stahl, O.; Stamerra, A.; Stanič, S.; Starling, R.; Staszak, D.; Stawarz, Ł.; Steenkamp, R.; Stefanik, S.; Stegmann, C.; Steiner, S.; Stella, C.; Stephan, M.; Stergioulas, N.; Sternberger, R.; Sterzel, M.; Stevenson, B.; Stinzing, F.; Stodulska, M.; Stodulski, M.; Stolarczyk, T.; Stratta, G.; Straumann, U.; Stringhetti, L.; Strzys, M.; Stuik, R.; Sulanke, K. -H.; Suomijärvi, T.; Supanitsky, A. D.; Suric, T.; Sushch, I.; Sutcliffe, P.; Sykes, J.; Szanecki, M.; Szepieniec, T.; Szwarnog, P.; Tacchini, A.; Tachihara, K.; Tagliaferri, G.; Tajima, H.; Takahashi, H.; Takahashi, K.; Takahashi, M.; Takalo, L.; Takami, S.; Takata, J.; Takeda, J.; Talbot, G.; Tam, T.; Tanaka, M.; Tanaka, S.; Tanaka, T.; Tanaka, Y.; Tanci, C.; Tanigawa, S.; Tavani, M.; Tavecchio, F.; Tavernet, J. -P.; Tayabaly, K.; Taylor, A.; Tejedor, L. A.; Telezhinsky, I.; Temme, F.; Temnikov, P.; Tenzer, C.; Terada, Y.; Terrazas, J. C.; Terrier, R.; Terront, D.; Terzic, T.; Tescaro, D.; Teshima, M.; Teshima, M.; Testa, V.; Tezier, D.; Thayer, J.; Thornhill, J.; Thoudam, S.; Thuermann, D.; Tibaldo, L.; Tiengo, A.; Timpanaro, M. C.; Tiziani, D.; Tluczykont, M.; Peixoto, C. J. Todero; Tokanai, F.; Tokarz, M.; Toma, K.; Tomastik, J.; Tomono, Y.; Tonachini, A.; Tonev, D.; Torii, K.; Tornikoski, M.; Torres, D. F.; Torres, M.; Torresi, E.; Toso, G.; Tosti, G.; Totani, T.; Tothill, N.; Toussenel, F.; Tovmassian, G.; Toyama, T.; Travnicek, P.; Trichard, C.; Trifoglio, M.; Pujadas, I. Troyano; Trzeciak, M.; Tsinganos, K.; Tsujimoto, S.; Tsuru, T.; Uchiyama, Y.; Umana, G.; Umetsu, Y.; Upadhya, S. S.; Uslenghi, M.; Vagelli, V.; Vagnetti, F.; Valdes-Galicia, J.; Valentino, M.; Vallania, P.; Valore, L.; van Driel, W.; van Eldik, C.; van Soelen, B.; Vandenbroucke, J.; Vanderwalt, J.; Vasileiadis, G.; Vassiliev, V.; Vázquez, J. R.; Acosta, M. L. Vázquez; Vecchi, M.; Vega, A.; Vegas, I.; Veitch, P.; Venault, P.; Venema, L.; Venter, C.; Vercellone, S.; Vergani, S.; Verma, K.; Verzi, V.; Vettolani, G. P.; Veyssiere, C.; Viana, A.; Viaux, N.; Vicha, J.; Vigorito, C.; Vincent, P.; Vincent, S.; Vink, J.; Vittorini, V.; Vlahakis, N.; Vlahos, L.; Voelk, H.; Voisin, V.; Vollhardt, A.; Volpicelli, A.; von Brand, H.; Vorobiov, S.; Vovk, I.; Vrastil, M.; Vu, L. V.; Vuillaume, T.; Wagner, R.; Wagner, R.; Wagner, S. J.; Wakely, S. P.; Walstra, T.; Walter, R.; Walther, T.; Ward, J. E.; Ward, M.; Warda, K.; Warren, D.; Wassberg, S.; Watson, J. J.; Wawer, P.; Wawrzaszek, R.; Webb, N.; Wegner, P.; Weiner, O.; Weinstein, A.; Wells, R.; Werner, F.; Wetteskind, H.; White, M.; White, R.; Więcek, M.; Wierzcholska, A.; Wiesand, S.; Wijers, R.; Wilcox, P.; Wild, N.; Wilhelm, A.; Wilkinson, M.; Will, M.; Will, M.; Williams, D. A.; Williams, J. T.; Willingale, R.; Wilson, N.; Winde, M.; Winiarski, K.; Winkler, H.; Winter, M.; Wischnewski, R.; Witt, E.; Wojcik, P.; Wolf, D.; Wood, M.; Wörnlein, A.; Wu, E.; Wu, T.; Yadav, K. K.; Yamamoto, H.; Yamamoto, T.; Yamane, N.; Yamazaki, R.; Yanagita, S.; Yang, L.; Yelos, D.; Yoshida, A.; Yoshida, M.; Yoshida, T.; Yoshiike, S.; Yoshikoshi, T.; Yu, P.; Zabalza, V.; Zaborov, D.; Zacharias, M.; Zaharijas, G.; Zajczyk, A.; Zampieri, L.; Zandanel, F.; Sanchez, R. Zanmar; Zaric, D.; Zavrtanik, D.; Zavrtanik, M.; Zdziarski, A.; Zech, A.; Zechlin, H.; Zhao, A.; Zhdanov, V.; Ziegler, A.; Ziemann, J.; Ziętara, K.; Zink, A.; Ziółkowski, J.; Zitelli, V.; Zoli, A.; Zorn, J.; Żychowski, P.
Comments: Index of CTA conference proceedings for the Gamma 2016, Heidelberg, Germany
Submitted: 2016-10-17
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
[13]  oai:arXiv.org:1602.08052  [pdf] - 1364476
Modelling stellar jets with magnetospheres using as initial states analytical MHD solutions
Comments: 26 pages, 6 figures
Submitted: 2016-02-25
In this paper we focus on the construction of stellar outflow models emerging from a polar coronal hole-type region surrounded by a magnetosphere in the equatorial regions during phases of quiescent accretion. The models are based on initial analytical solutions. We adopt a meridionally self-similar solution of the time-independent and axisymmetric MHD equations which describes effectively a jet originating from the corona of a star. We modify appropriately this solution in order to incorporate a physically consistent stellar magnetosphere. We find that the closed fieldline region may exhibit different behaviour depending on the associated boundary conditions and the distribution of the heat flux. However, the stellar jet in all final equilibrium states is very similar to the analytical one prescribed in the initial conditions. When the initial net heat flux is maintained, the magnetosphere takes the form of a dynamical helmet streamer with a quasi steady state slow magnetospheric wind. With no heat flux, a small dead zone forms around the equator, surrounded by a weak streamer, source of a low mass flux magnetospheric ejection. An equilibrium with no streamer and a helmet shaped dead zone is found when the coronal hole is larger and extends up to a reduced closed fieldline static zone. The study demonstrates the robustness of self-similar solutions and their ability to provide quasi-steady jet simulations with realistic boundaries and surrounded by equatorial magnetospheres.
[14]  oai:arXiv.org:1602.03680  [pdf] - 1374339
The spectroscopic imprint of the pre-eruptive configuration resulting into two major coronal mass ejections
Comments: 14 pages, 12 figures, 4 tables
Submitted: 2016-02-11
We present a spectroscopic analysis of the pre-eruptive configuration of active region NOAA 11429, prior to two very fast coronal mass ejections (CMEs) on March 7, 2012 that are associated with this active region. We study the thermal components and the dynamics associated with the ejected flux ropes. Using differential emission measure (DEM) analysis of Hinode/EIS and SDO/AIA observations, we identify the emission components of both the flux rope and the host active region. We then follow the time evolution of the flux rope emission components by using AIA observations. The plasma density and the Doppler and non-thermal velocities associated with the flux ropes are also calculated from the EIS data. The eastern and western parts of the active region, in which the two different fast CMEs originated during two X-class flares, were studied separately. In both regions we identified an emission component in the temperature range of $\log T=6.8 - 7.1$ associated with the presence of flux ropes. The time evolution of the eastern region showed an increase in the mean DEM in this temperature range by an order of magnitude, 5 hours prior to the first CME. This was associated with a gradual rise and heating of the flux rope as manifested by blue-shifts and increased non-thermal velocities in \ion{Ca}{XV}~200.97\AA, respectively. An overall upward motion of the flux ropes was measured (relative blue-shifts of $\sim12$~\kms). The measured electron density was found to be $4\times 10^9 - 2 \times10^{10}$ cm$^{-3}$ (using the ratio of \ion{Ca}{XV}~181.90\AA\ over \ion{Ca}{XV}~200.97\AA). We compare our findings with other works on the same AR to provide a unified picture of its evolution.
[15]  oai:arXiv.org:1510.03849  [pdf] - 1374128
NELIOTA: ESA's new NEO lunar impact monitoring project with the 1.2m telescope at the National Observatory of Athens
Comments: 3 pages, 1 figure, IAU GA Symposium 318 proceedings
Submitted: 2015-10-13
NELIOTA is a new ESA activity launched at the National Observatory of Athens in February 2015 aiming to determine the distribution and frequency of small near-earth objects (NEOs) via lunar monitoring. The project involves upgrading the 1.2m Kryoneri telescope at the National Observatory of Athens, procuring two fast-frame cameras, and developing a software system, which will control the telescope and the cameras, process the images and automatically detect NEO impacts. NELIOTA will provide a web-based user interface, where the impact events will be reported and made available to the scientific community and the general public. The objective of this 3.5 year activity is to design, develop and implement a highly automated lunar monitoring system, which will conduct an observing campaign for 2 years in search of NEO impact flashes on the Moon. The impact events will be verified, characterised and reported. The 1.2m telescope will be capable of detecting flashes much fainter than current, small-aperture, lunar monitoring telescopes. NELIOTA is therefore expected to characterise the frequency and distribution of NEOs weighing as little as a few grams.
[16]  oai:arXiv.org:1508.05894  [pdf] - 1275515
CTA Contributions to the 34th International Cosmic Ray Conference (ICRC2015)
Consortium, The CTA; :; Abchiche, A.; Abeysekara, U.; Abril, Ó.; Acero, F.; Acharya, B. S.; Actis, M.; Agnetta, G.; Aguilar, J. A.; Aharonian, F.; Akhperjanian, A.; Albert, A.; Alcubierre, M.; Alfaro, R.; Aliu, E.; Allafort, A. J.; Allan, D.; Allekotte, I.; Aloisio, R.; Amans, J. -P.; Amato, E.; Ambrogi, L.; Ambrosi, G.; Ambrosio, M.; Anderson, J.; Anduze, M.; Angüner, E. O.; Antolini, E.; Antonelli, L. A.; Antonucci, M.; Antonuccio, V.; Antoranz, P.; Aramo, C.; Aravantinos, A.; Argan, A.; Armstrong, T.; Arnaldi, H.; Arnold, L.; Arrabito, L.; Arrieta, M.; Arrieta, M.; Asano, K.; Asorey, H. G.; Aune, T.; Singh, C. B.; Babic, A.; Backes, M.; Bais, A.; Bajtlik, S.; Balazs, C.; Balbo, M.; Balis, D.; Balkowski, C.; Ballester, O.; Ballet, J.; Balzer, A.; Bamba, A.; Bandiera, R.; Barber, A.; Barbier, C.; Barceló, M.; Barnacka, A.; de Almeida, U. Barres; Barrio, J. A.; Basso, S.; Bastieri, D.; Bauer, C.; Baushev, A.; Becciani, U.; Becherini, Y.; Tjus, J. Becker; Beckmann, V.; Bednarek, W.; Benbow, W.; Ventura, D. Benedico; Berdugo, J.; Berge, D.; Bernardini, E.; Bernhard, S.; Bernlöhr, K.; Bertucci, B.; Besel, M. -A.; Bhatt, N.; Bhattacharjee, P.; Bhattachryya, S.; Biasuzzi, B.; Bicknell, G.; Bigongiari, C.; Biland, A.; Billotta, S.; Bilnik, W.; Biondo, B.; Bird, T.; Birsin, E.; Bissaldi, E.; Biteau, J.; Bitossi, M.; Bigas, O. Blanch; Blasi, P.; Boehm, C.; Bogacz, L.; Bogdan, M.; Bohacova, M.; Boisson, C.; Gargallo, J. Boix; Bolmont, J.; Bonanno, G.; Bonardi, A.; Bonifacio, P.; Bonnoli, G.; Borkowski, J.; Bose, R.; Bosnjak, Z.; Bottani, A.; Böttcher, M.; Bousquet, J. -J.; Boutonnet, C.; Bouyjou, F.; Braiding, C.; Brandt, L.; Brau-Nogué, S.; Bregeon, J.; Bretz, T.; Briggs, M.; Brigida, M.; Bringmann, T.; Brisken, W.; Brocato, E.; Brook, P.; Brown, A. M.; Brun, P.; Brunetti, G.; Brunetti, L.; Bruno, P.; Bryan, M.; Buanes, T.; Bucciantini, N.; Buchholtz, G.; Buckley, J.; Bugaev, V.; Bühler, R.; Bulgarelli, A.; Bulik, T.; Burton, M.; Burtovoi, A.; Busetto, G.; Buson, S.; Buss, J.; Byrum, K.; Cameron, R.; Camprecios, J.; Canelli, F.; Canestrari, R.; Cantu, S.; Capalbi, M.; Capasso, M.; Capobianco, G.; Caraveo, P.; Cardenzana, J.; Carius, S.; Carlile, C.; Carmona, E.; Carosi, A.; Carosi, R.; Carr, J.; Carroll, M.; Carter, J.; Carton, P. -H.; Caruso, R.; Casandjian, J. -M.; Casanova, S.; Cascone, E.; Casiraghi, M.; Castellina, A.; Catalano, O.; Catalanotti, S.; Cavazzani, S.; Cazaux, S.; Cefalà, M.; Cerchiara, P.; Cereda, M.; Cerruti, M.; Chabanne, E.; Chadwick, P.; Champion, C.; Chaty, S.; Chaves, R.; Cheimets, P.; Chen, A.; Chen, X.; Chernyakova, M.; Chiappetti, L.; Chikawa, M.; Chinn, D.; Chitnis, V. R.; Cho, N.; Christov, A.; Chudoba, J.; Cieślar, M.; Cillis, A.; Ciocci, M. A.; Clay, R.; Cohen-Tanugi, J.; Colafrancesco, S.; Colin, P.; Colombo, E.; Colome, J.; Colonges, S.; Compin, M.; Conforti, V.; Connaughton, V.; Connell, S.; Conrad, J.; Contreras, J. L.; Coppi, P.; Corbel, S.; Coridian, J.; Corona, P.; Corti, D.; Cortina, J.; Cossio, L.; Costa, A.; Costantini, H.; Cotter, G.; Courty, B.; Covino, S.; Covone, G.; Crimi, G.; Criswell, S. J.; Crocker, R.; Croston, J.; Cusumano, G.; Da Vela, P.; Dale, Ø.; D'Ammando, F.; Dang, D.; Daniel, M.; Davids, I.; Dawson, B.; Dazzi, F.; Costa, B. de Aguiar; De Angelis, A.; Cardoso, R. F. de Araujo; De Caprio, V.; De Cesare, G.; De Franco, A.; De Frondat, F.; Pino, E. M. de Gouveia Dal; de la Calle, I.; De La Vega, G. A.; Lopez, R. de los Reyes; De Lotto, B.; De Luca, A.; Neto, J. R. T. de Mello; de Naurois, M.; Wilhelmi, E. de Oña; De Palma, F.; de Souza, V.; Decock, G.; Deil, C.; Del Santo, M.; Delagnes, E.; Deleglise, G.; Delgado, C.; della Volpe, D.; Deloye, P.; Depaola, G.; Detournay, M.; Dettlaff, A.; Di Girolamo, T.; Di Giulio, C.; Di Paola, A.; Di Pierro, F.; Di Sciascio, G.; Díaz, C.; Dick, J.; Dickinson, H.; Diebold, S.; Diez, V.; Digel, S.; Dipold, J.; Disset, G.; Distefano, A.; Djannati-Ataï, A.; Doert, M.; Dohmke, M.; Domainko, W.; Dominik, N.; Prester, D. Dominis; Donat, A.; Donnarumma, I.; Dorner, D.; Doro, M.; Dournaux, J. -L.; Doyle, K.; Drake, G.; Dravins, D.; Drury, L.; Dubus, G.; Dumas, D.; Dumm, J.; Durand, D.; D'Urso, D.; Dwarkadas, V.; Dyks, J.; Dyrda, M.; Ebr, J.; Echaniz, J. C.; Edy, E.; Egberts, K.; Egberts, K.; Eger, P.; Einecke, S.; Eisch, J.; Eisenkolb, F.; Eleftheriadis, C.; Elsässer, D.; Emmanoulopoulos, D.; Engelbrecht, C.; Engelhaupt, D.; Ernenwein, J. -P.; Errando, M.; Eschbach, S.; Etchegoyen, A.; Evans, P.; Fairbairn, M.; Falcone, A.; Fantinel, D.; Farakos, K.; Farnier, C.; Farrell, E.; Farrell, S.; Fasola, G.; Fegan, S.; Feinstein, F.; Ferenc, D.; Fernandez, A.; Fernandez-Alonso, M.; Ferreira, O.; Fesquet, M.; Fetfatzis, P.; Fiasson, A.; Filipčič, A.; Filipovic, M.; Fink, D.; Finley, C.; Finley, J. P.; Finoguenov, A.; Fioretti, V.; Fiorini, M.; Curcoll, R. Firpo; Fleischhack, H.; Flores, H.; Florin, D.; Föhr, C.; Fokitis, E.; Font, L.; Fontaine, G.; Fontes, B.; Forest, F.; Fornasa, M.; Förster, A.; Fortin, P.; Fortson, L.; Fouque, N.; Franckowiak, A.; Franco, F. J.; Frankowski, A.; Frega, N.; Albuquerque, I. Freire Mota; Coromina, L. Freixas; Fresnillo, L.; Fruck, C.; Fuessling, M.; Fugazza, D.; Fujita, Y.; Fukami, S.; Fukazawa, Y.; Fukuda, T.; Fukui, Y.; Funk, S.; Gäbele, W.; Gabici, S.; Gadola, A.; Galante, N.; Gall, D. D.; Gallant, Y.; Galloway, D.; Gallozzi, S.; Gao, S.; Garcia, B.; Gil, R. García; López, R. Garcia; Garczarczyk, M.; Gardiol, D.; Gargano, C.; Gargano, F.; Garozzo, S.; Garrecht, F.; Garrido, D.; Garrido, L.; Gascon, D.; Gaskins, J.; Gaudemard, J.; Gaug, M.; Gaweda, J.; Geffroy, N.; Gérard, L.; Ghalumyan, A.; Ghedina, A.; Ghigo, M.; Ghislain, P.; Giannakaki, E.; Gianotti, F.; Giarrusso, S.; Giavitto, G.; Giebels, B.; Giglietto, N.; Gika, V.; Gimenes, R.; Giomi, M.; Giommi, P.; Giordano, F.; Giovannini, G.; Giro, E.; Giroletti, M.; Giuliani, A.; Glicenstein, J. -F.; Godinovic, N.; Goldoni, P.; Berisso, M. Gomez; Vargas, G. A. Gomez; Gonzalez, M. M.; González, A.; González, F.; Muñoz, A. González; Gothe, K. S.; Gotz, D.; Grabarczyk, T.; Graciani, R.; Grandi, P.; Grañena, F.; Granot, J.; Grasseau, G.; Gredig, R.; Green, A. J.; Green, A. M.; Greenshaw, T.; Grenier, I.; Grillo, A.; Grondin, M. -H.; Grube, J.; Grudzinska, M.; Grygorczuk, J.; Guarino, V.; Guberman, D.; Gunji, S.; Gyuk, G.; Hadasch, D.; Hagedorn, A.; Hahn, J.; Hakansson, N.; Heras, N. Hamer; Hanabata, Y.; Hara, S.; Hardcastle, M. J.; Harris, J.; Hassan, T.; Hatanaka, K.; Haubold, T.; Haupt, A.; Hayakawa, T.; Hayashida, M.; Heller, M.; Heller, R.; Henault, F.; Henri, G.; Hermann, G.; Hermel, R.; Llorente, J. Herrera; Herrero, A.; Hervet, O.; Hidaka, N.; Hinton, J.; Hirai, W.; Hirotani, K.; Hoard, D.; Hoffmann, D.; Hofmann, W.; Hofverberg, P.; Holch, T.; Holder, J.; Hooper, S.; Horan, D.; Hörandel, J. R.; Hormigos, S.; Horns, D.; Hose, J.; Houles, J.; Hovatta, T.; Hrabovsky, M.; Hrupec, D.; Huet, J. -M.; Hütten, M.; Humensky, T. B.; Huovelin, J.; Huppert, J. -F.; Iacovacci, M.; Ibarra, A.; Idźkowski, B.; Ikawa, D.; Illa, J. M.; Impiombato, D.; Incorvaia, S.; Inome, Y.; Inoue, S.; Inoue, T.; Inoue, Y.; Iocco, F.; Ioka, K.; Iori, M.; Ishio, K.; Israel, G. L.; Jablonski, C.; Jacholkowska, A.; Jacquemier, J.; Jamrozy, M.; Janecek, P.; Janiak, M.; Jankowsky, F.; Jean, P.; Jeanney, C.; Jegouzo, I.; Jenke, P.; Jimenez, J. J.; Jingo, M.; Jingo, M.; Jocou, L.; Jogler, T.; Johnson, C. A.; Journet, L.; Juffroy, C.; Jung, I.; Kaaret, P. E.; Kagaya, M.; Kakuwa, J.; Kalekin, O.; Kalkuhl, C.; Kankanyan, R.; Karastergiou, A.; Kärcher, K.; Karczewski, M.; Karkar, S.; Karn, P.; Kasperek, J.; Katagiri, H.; Kataoka, J.; Katarzyński, K.; Katz, U.; Kaufmann, S.; Kawanaka, N.; Kawashima, T.; Kazanas, D.; Kelley-Hoskins, N.; Kellner-Leidel, B.; Kendziorra, E.; Kersten, J.; Khélifi, B.; Kieda, D. B.; Kihm, T.; Kisaka, S.; Kissmann, R.; Klepser, S.; Kluźniak, W.; Knapen, J.; Knapp, J.; Knödlseder, J.; Köck, F.; Kocot, J.; Kodakkadan, A.; Kodani, K.; Kohri, K.; Kojima, T.; Kokkotas, K.; Kolitzus, D.; Komin, N.; Kominis, I.; Konno, Y.; Kosack, K.; Koss, G.; Koul, R.; Kowal, G.; Koyama, S.; Kozioł, J.; Kraus, M.; Krause, J.; Krause, M.; Krawzcynski, H.; Krennrich, F.; Kretzschmann, A.; Kruger, P.; Kubo, H.; Kudryavtsev, V.; Mezek, G. Kukec; Kushida, J.; Kuznetsov, A.; La Barbera, A.; La Palombara, N.; La Parola, V.; La Rosa, G.; Laffon, H.; Lagadec, T.; Lahmann, R.; Lalik, K.; Lamanna, G.; Landriu, D.; Landt, H.; Lang, R. G.; Languignon, D.; Lapington, J.; Laporte, P.; Latovski, N.; Law-Green, D.; Fèvre, J. -P. Le; Flour, T. Le; Sidaner, P. Le; Lee, S. -H.; Lee, W. H.; Leffhalm, K.; Leich, H.; de Oliveira, M. A. Leigui; Lelas, D.; Lemière, A.; Lemoine-Goumard, M.; Lenain, J. -P.; Leonard, R.; Leoni, R.; Lessio, L.; Leto, G.; Leveque, A.; Lieunard, B.; Limon, M.; Lindemann, R.; Lindfors, E.; Liolios, A.; Lipniacka, A.; Lockart, H.; Lohse, T.; Loiseau, D.; Łokas, E.; Lombardi, S.; Longo, F.; Longo, G.; Lopatin, A.; Lopez, M.; López-Coto, R.; López-Oramas, A.; Loreggia, D.; Louge, T.; Louis, F.; Lu, C. -C.; Lucarelli, F.; Lucchesi, D.; Lüdecke, H.; Luque-Escamilla, P. L.; Luz, O.; Lyard, E.; Maccarone, M. C.; Maccarone, T. J.; Mach, E.; Madejski, G. M.; Madonna, A.; Mahabir, M.; Maier, G.; Majumdar, P.; Makariev, M.; Malaguti, G.; Malaspina, G.; Mallot, A. K.; Maltezos, S.; Mancilla, A.; Mandat, D.; Maneva, G.; Manigot, P.; Mankushiyil, N.; Mannheim, K.; Maragos, N.; Marano, D.; Marchegiani, P.; Marcomini, J. A.; Marcowith, A.; Mariotti, M.; Marisaldi, M.; Markoff, S.; Marszałek, A.; Martens, C.; Martí, J.; Martin, J. -M.; Martin, P.; Martínez, G.; Martínez, M.; Martínez, O.; Marx, R.; Massimino, P.; Mastichiadis, A.; Mastroianni, S.; Mastropietro, M.; Masuda, S.; Matsumoto, H.; Matsuoka, S.; Mattiazzo, S.; Maurin, G.; Maxted, N.; Maya, J.; Mayer, M.; Mazin, D.; Mazureau, E.; Mazziotta, M. N.; Comb, L. Mc; McCann, A.; McCubbin, N.; McHardy, I.; McKay, R.; McKinney, K.; Meagher, K.; Medina, C.; Mehrez, F.; Melioli, C.; Melkumyan, D.; Melo, D.; Melse, T.; Mereghetti, S.; Mertsch, P.; Meyer, M.; Meyrelles, J. L.; Miccichè, A.; Michałowski, J.; Micolon, P.; Mientjes, P.; Mignot, S.; Mihailidis, A.; Mineo, T.; Minuti, M.; Mirabal, N.; Mirabel, F.; Miranda, J. M.; Mirzoyan, R.; Mistò, A.; Mitchell, A.; Mizuno, T.; Moderski, R.; Mognet, I.; Mohammed, M.; Moharana, R.; Molinari, E.; Monmarthe, E.; Monnier, G.; Montaruli, T.; Monte, C.; Monteiro, I.; Moore, P.; Olaizola, A. Moralejo; Morello, C.; Moretti, E.; Mori, K.; Morlino, G.; Morselli, A.; Mottez, F.; Moudden, Y.; Moulin, E.; Mrusek, I.; Mueller, S.; Mukherjee, R.; Munar-Adrover, P.; Mundell, C.; Muraishi, H.; Murase, K.; Muronga, A.; Murphy, A.; Nagataki, S.; Nagayoshi, T.; Nagesh, B. K.; Naito, T.; Nakajima, D.; Nakamori, T.; Nakayama, K.; Naumann, D.; Nayman, P.; Nellen, L.; Nemmen, R.; Neronov, A.; Neustroev, V.; Neyroud, N.; Nguyen, T.; Nicastro, L.; Nicolau-Kukliński, J.; Niederwanger, F.; Niedźwiecki, A.; Niemiec, J.; Nieto, D.; Nievas, M.; Nikolaidis, A.; Nishijima, K.; Nishikawa, K. -I.; Noda, K.; Nogues, L.; Nolan, S.; Northrop, R.; Nosek, D.; Nozka, L.; Nunio, F.; Oakes, L.; O'Brien, P.; Occhipinti, G.; de Bhroithe, A. O'Faolain; Ogino, M.; Ohira, Y.; Ohishi, M.; Ohm, S.; Ohoka, H.; Okumura, A.; Olive, J. -F.; Olszowski, D.; Ong, R. A.; Ono, S.; Orienti, M.; Orito, R.; Orlati, A.; Orlati, A.; Osborne, J.; Ostrowski, M.; Otero, L. A.; Ottaway, D.; Otte, N.; Oya, I.; Ozieblo, A.; Padovani, M.; Pagano, I.; Paiano, S.; Paizis, A.; Palacio, J.; Palatka, M.; Pallotta, J.; Panagiotidis, K.; Panazol, J. -L.; Paneque, D.; Panter, M.; Panzera, M. R.; Paoletti, R.; Paolillo, M.; Papayannis, A.; Papyan, G.; Paravac, A.; Paredes, J. M.; Pareschi, G.; Park, N.; Parsons, D.; Paśko, P.; Pavy, S.; Arribas, M. Paz; Pech, M.; Peck, A.; Pedaletti, G.; Peet, S.; Pelassa, V.; Pelat, D.; Peres, C.; Perez, M. d. C.; Perri, L.; Persic, M.; Petrashyk, A.; Petrucci, P. -O.; Peyaud, B.; Pfeifer, M.; Pfeiffer, G.; Piano, G.; Pichel, A.; Pieloth, D.; Pierbattista, M.; Pierre, E.; de Pinho, F. Pinto; García, C. Pio; Piret, Y.; Pita, S.; Planes, A.; Platino, M.; Platos, Ł.; Platzer, R.; Podkladkin, S.; Pogosyan, L.; Pohl, M.; Poinsignon, P.; Ponz, J. D.; Porcelli, A.; Potter, W.; Poulios, S.; Poutanen, J.; Prandini, E.; Prast, J.; Preece, R.; Profeti, F.; Prokhorov, D.; Prokoph, H.; Prouza, M.; Proyetti, M.; Pruchniewicz, R.; Pueschel, E.; Pühlhofer, G.; Puljak, I.; Punch, M.; Pyzioł, R.; Queiroz, F.; Quel, E. J.; Quinn, J.; Quirrenbach, A.; Racero, E.; Räck, T.; Rafalski, J.; Rafighi, I.; Rainò, S.; Rajda, P. J.; Rameez, M.; Rando, R.; Rannot, R. C.; Rataj, M.; Rateau, S.; Ravel, T.; Ravignani, D.; Razzaque, S.; Reardon, P.; Reimann, O.; Reimer, A.; Reimer, O.; Reitberger, K.; Renaud, M.; Renner, S.; Reposeur, T.; Rettig, R.; Reville, B.; Rhode, W.; Ribeiro, D.; Ribó, M.; Richards, G.; Richer, M. G.; Rico, J.; Ridky, J.; Rieger, F.; Ringegni, P.; Ristori, P. R.; Rivière, A.; Rivoire, S.; Roache, E.; Rodeghiero, G.; Rodriguez, J.; Fernandez, G. Rodriguez; Vázquez, J. J. Rodríguez; Rogers, T.; Rojas, G.; Romano, P.; Rodriguez, M. P. Romay; Romeo, G.; Romero, G. E.; Roncadelli, M.; Rose, J.; Rosen, S.; Lees, S. Rosier; Ross, D.; Rossiter, P.; Rouaix, G.; Rousselle, J.; Rovero, A. C.; Rowell, G.; Roy, F.; Royer, S.; Różańska, A.; Rudak, B.; Rugliancich, A.; Rulten, C.; Rupiński, M.; Russo, F.; Rutkowski, K.; Saavedra, O.; Sabatini, S.; Sacco, B.; Saemann, E. O.; Saggion, A.; Saha, L.; Sahakian, V.; Saito, K.; Saito, T.; Sakaki, N.; Salega, M.; Salek, D.; Salgado, J.; Salini, A.; Sanchez, D.; Sanchez, F.; Sanchez-Conde, M.; Sandaker, H.; Sandoval, A.; Sangiorgi, P.; Sanguillon, M.; Sano, H.; Santander, M.; Santangelo, A.; Santos, E. M.; Santos-Lima, R.; Sanuy, A.; Sapozhnikov, L.; Sarkar, S.; Satalecka, K.; Savalle, R.; Sawada, M.; Sayède, F.; Schafer, J.; Schanne, S.; Schanz, T.; Schioppa, E. J.; Schlenstedt, S.; Schlickeiser, R.; Schmidt, T.; Schmoll, J.; Schneider, M.; Schovanek, P.; Schubert, A.; Schultz, C.; Schultze, J.; Schulz, A.; Schulz, S.; Schure, K.; Schussler, F.; Schwab, T.; Schwanke, U.; Schwarz, J.; Schweizer, T.; Schwemmer, S.; Schwendicke, U.; Schwerdt, C.; Segreto, A.; Seiradakis, J. -H.; Sembroski, G. H.; Semikoz, D.; Serre, N.; Servillat, M.; Seweryn, K.; Shafi, N.; Sharma, M.; Shayduk, M.; Shellard, R. C.; Shibata, T.; Pandeni, K. Shiningayamwe; Shukla, A.; Shum, E.; Sidoli, L.; Sidz, M.; Sieiro, J.; Siejkowski, H.; Silk, J.; Sillanpää, A.; Simone, D.; Singh, B. B.; Sinha, A.; Sironi, G.; Sitarek, J.; Sizun, P.; Slyusar, V.; Smith, A.; Smith, J.; Sobczyńska, D.; Sol, H.; Sottile, G.; Sowiński, M.; Spanier, F.; Spengler, G.; Spiga, D.; Stadler, R.; Stahl, O.; Stamatescu, V.; Stamerra, A.; Stanič, S.; Starling, R.; Stawarz, Ł.; Steenkamp, R.; Stefanik, S.; Stegmann, C.; Steiner, S.; Stella, C.; Stergioulas, N.; Sternberger, R.; Sterzel, M.; Stevenson, B.; Stinzing, F.; Stodulska, M.; Stodulski, M.; Stolarczyk, T.; Straumann, U.; Strazzeri, E.; Stringhetti, L.; Strzys, M.; Stuik, R.; Sulanke, K. -H.; Supanitsky, A. D.; Suric, T.; Sushch, I.; Sutcliffe, P.; Sykes, J.; Szanecki, M.; Szepieniec, T.; Szwarnog, P.; Tacchini, A.; Tachihara, K.; Tagliaferri, G.; Tajima, H.; Takahashi, H.; Takahashi, K.; Takahashi, M.; Takalo, L.; Takami, H.; Talbot, G.; Tammi, J.; Tanaka, M.; Tanaka, S.; Tanaka, T.; Tanaka, Y.; Tanci, C.; Tarantino, E.; Tavani, M.; Tavecchio, F.; Tavernet, J. -P.; Tayabaly, K.; Tejedor, L. A.; Telezhinsky, I.; Temme, F.; Temnikov, P.; Tenzer, C.; Terada, Y.; Terrier, R.; Tescaro, D.; Teshima, M.; Testa, V.; Tezier, D.; Thayer, J.; Thomas, V.; Thornhill, J.; Thuermann, D.; Tibaldo, L.; Tibolla, O.; Tiengo, A.; Tijsseling, G.; Timpanaro, M. C.; Tluczykont, M.; Peixoto, C. J. Todero; Tokanai, F.; Tokarz, M.; Toma, K.; Toma, K.; Tomastik, J.; Tomono, Y.; Tonachini, A.; Tonev, D.; Torii, K.; Tornikoski, M.; Torres, D. F.; Torres, M.; Torresi, E.; Toscano, S.; Toso, G.; Tosti, G.; Totani, T.; Tothill, N.; Toussenel, F.; Tovmassian, G.; Townsley, C.; Toyama, T.; Travnicek, P.; Trifoglio, M.; Pujadas, I. Troyano; Pujadas, I. Troyano; Trzeciak, M.; Tsinganos, K.; Tsubone, Y.; Tsuchiya, Y.; Tsujimoto, S.; Tsuru, T.; Uchiyama, Y.; Umana, G.; Umetsu, Y.; Underwood, C.; Upadhya, S. S.; Uslenghi, M.; Vagnetti, F.; Valdes-Galicia, J.; Vallania, P.; Vallejo, G.; Valore, L.; van Driel, W.; van Eldik, C.; van Soelen, B.; Vandenbroucke, J.; Vanderwalt, J.; Vasileiadis, G.; Vassiliev, V.; Acosta, M. L. Vázquez; Vecchi, M.; Vegas, I.; Veitch, P.; Venema, L.; Venter, C.; Vercellone, S.; Vergani, S.; Verma, K.; Verzi, V.; Vettolani, G. P.; Viana, A.; Vicha, J.; Videla, M.; Vigorito, C.; Vincent, P.; Vincent, S.; Vink, J.; Vittorini, V.; Vlahakis, N.; Vlahos, L.; Voelk, H.; Vogler, P.; Voisin, V.; Vollhardt, A.; Volpicelli, A.; Vorobiov, S.; Vovk, I.; Vu, L. V.; Wagner, R.; Wagner, R. M.; Wagner, R. G.; Wagner, S. J.; Wakely, S. P.; Walter, R.; Walther, T.; Ward, J. E.; Ward, M.; Warda, K.; Warwick, R.; Wassberg, S.; Watson, J.; Wawer, P.; Wawrzaszek, R.; Webb, N.; Wegner, P.; Weinstein, A.; Weitzel, Q.; Wells, R.; Werner, F.; Werner, M.; Wetteskind, H.; White, M.; White, R.; Więcek, M.; Wierzcholska, A.; Wiesand, S.; Wijers, R.; Wild, N.; Wilhelm, A.; Wilkinson, M.; Will, M.; Williams, D. A.; Williams, J. T.; Willingale, R.; Winde, M.; Winiarski, K.; Winkler, H.; Wischnewski, R.; Wojcik, P.; Wolf, D.; Wood, M.; Wörnlein, A.; Wu, E.; Wu, T.; Yadav, K. K.; Yamamoto, H.; Yamamoto, T.; Yamazaki, R.; Yanagita, S.; Yang, L.; Yebras, J. M.; Yelos, D.; Yeung, W.; Yoshida, A.; Yoshida, T.; Yoshiike, S.; Yoshikoshi, T.; Yu, P.; Zabalza, V.; Zabalza, V.; Zacharias, M.; Zaharijas, G.; Zajczyk, A.; Zampieri, L.; Zandanel, F.; Zanin, R.; Sanchez, R. Zanmar; Zavrtanik, D.; Zavrtanik, M.; Zdziarski, A.; Zech, A.; Zechlin, H.; Zhao, A.; Ziegler, A.; Ziemann, J.; Ziętara, K.; Ziółkowski, J.; Zitelli, V.; Zoli, A.; Zurbach, C.; Żychowski, P.
Comments: Index of CTA conference proceedings at the ICRC2015, The Hague (The Netherlands). v1: placeholder with no arXiv links yet, to be replaced once individual contributions have been all submitted; v2: final with arXiv links to all CTA contributions and full author list
Submitted: 2015-08-24, last modified: 2015-09-11
List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands.
[17]  oai:arXiv.org:1509.02850  [pdf] - 1312006
Emergence of non-twisted magnetic fields in the Sun: Jets and atmospheric response
Comments: 16 pages, 15 figures
Submitted: 2015-09-09
Aims. We study the emergence of a non-twisted flux tube from the solar interior into the solar atmosphere. We investigate whether the length of the buoyant part of the flux tube (i.e. {\lambda}) affects the emergence of the field and the dynamics of the evolving magnetic flux system. Methods. We perform three-dimensional (3D), time-dependent, resistive, compressible MHD simulations using the Lare3D code. Results. We find that there are considerable differences in the dynamics of the emergence of a magnetic flux tube when {\lambda} is varied. In the solar interior, for larger values of {\lambda}, the rising magnetic field emerges faster and expands more due to its lower magnetic tension. As a result, its field strength decreases and its emergence above the photosphere occurs later than in the smaller {\lambda} case. However, in both cases, the emerging field at the photosphere becomes unstable in two places, forming two magnetic bipoles that interact dynamically during the evolution of the system. Most of the dynamic phenomena occur at the current layer, which is formed at the interface between the interacting bipoles. We find the formation and ejection of plasmoids, the onset of successive jets from the interface, and the impulsive heating of the plasma in the solar atmosphere. We discuss the triggering mechanism of the jets and the atmospheric response to the emergence of magnetic flux in the two cases.
[18]  oai:arXiv.org:1405.6955  [pdf] - 827389
Recurrent explosive eruptions and the sigmoid-to-arcade transformation in the sun driven by dynamical magnetic flux emergence
Comments: 4 pages, 4 figures
Submitted: 2014-05-25
We report on three-dimensional (3D) MHD simulations of recurrent mini CME-like eruptions in a small active region (AR), which is formed by the dynamical emergence of a twisted (not kink unstable) flux tube from the solar interior. The eruptions are developed as a result of repeated formation and expulsion of new flux ropes due to continous emergence and reconnection of sheared fieldlines along the polarity inversion line (PIL) of the AR. The acceleration of the eruptions is triggered by tether-cutting reconnection at the current sheet underneath the erupting field. We find that each explosive eruption is followed by reformation of a sigmoidal structure and a subsequent sigmoid-to-flare arcade transformation in the AR. These results might have implications for recurrent CMEs and eruptive sigmoids/flares observations and theoretical studies.
[19]  oai:arXiv.org:1405.3924  [pdf] - 1209568
Large resistivity in numerical simulations of radially self-similar outflows
Comments: accepted in MNRAS
Submitted: 2014-05-13
We investigate the differences between an outflow in a highly-resistive accretion disk corona, and the results with smaller or vanishing resistivity. For the first time, we determine conditions at the base of a two-dimensional radially self-similar outflow in the regime of very large resistivity. We performed simulations using the {\sc pluto} magnetohydrodynamics code, and found three modes of solutions. The first mode, with small resistivity, is similar to the ideal-MHD solutions. In the second mode, with larger resistivity, the geometry of the magnetic field changes, with a "bulge" above the super-fast critical surface. At even larger resistivities, the third mode of solutions sets in, in which the magnetic field is no longer collimated, but is pressed towards the disk. This third mode is also the final one: it does not change with further increase of resistivity. These modes describe topological change in a magnetic field above the accretion disk because of the uniform, constant Ohmic resistivity.
[20]  oai:arXiv.org:1404.7427  [pdf] - 1209237
Counter-rotation in relativistic magnetohydrodynamic jets
Comments: Accepted for publication in ApJL
Submitted: 2014-04-29
Young stellar object observations suggest that some jets rotate in the opposite direction with respect to their disk. In a recent study, Sauty et al. (2012) have shown that this does not contradict the magnetocentrifugal mechanism that is believed to launch such outflows. Signatures of motions transverse to the jet axis and in opposite directions have recently been measured in M87 (Meyer et al. 2013). One possible interpretation of this motion is the one of counter rotating knots. Here, we extend our previous analytical derivation of counter-rotation to relativistic jets, demonstrating that counter-rotation can indeed take place under rather general conditions. We show that both the magnetic field and a non-negligible enthalpy are necessary at the origin of counter-rotating outflows, and that the effect is associated with a transfer of energy flux from the matter to the electromagnetic field. This can be realized in three cases : if a decreasing enthalpy causes an increase of the Poynting flux, if the flow decelerates, or, if strong gradients of the magnetic field are present. An illustration of the involved mechanism is given by an example of relativistic MHD jet simulation.
[21]  oai:arXiv.org:1402.0002  [pdf] - 1203113
3D simulations of disc-winds extending radially self-similar MHD models
Comments: 8 pages, 6 figures, accepted for publication in MNRAS
Submitted: 2014-01-31
Disc-winds originating from the inner parts of accretion discs are considered as the basic component of magnetically collimated outflows. The only available analytical MHD solutions to describe disc-driven jets are those characterized by the symmetry of radial self-similarity. However, radially self-similar MHD jet models, in general, have three geometrical shortcomings, (i) a singularity at the jet axis, (ii) the necessary assumption of axisymmetry, and (iii) the non-existence of an intrinsic radial scale, i.e. the jets formally extend to radial infinity. Hence, numerical simulations are necessary to extend the analytical solutions towards the axis, by solving the full three-dimensional equations of MHD and impose a termination radius at finite radial distance. We focus here on studying the effects of relaxing the (ii) assumption of axisymmetry, i.e. of performing full 3D numerical simulations of a disc-wind crossing all magnetohydrodynamic critical surfaces. We compare the results of these runs with previous axisymmetric 2.5D simulations. The structure of the flow in all simulations shows strong similarities. The 3D runs reach a steady state and stay close to axisymmetry for most of the physical quantities, except for the poloidal magnetic field and the toroidal velocity which slightly deviate from axisymmetry. The latter quantities show signs of instabilities, which, however, are confined to the region inside the fast magnetosonic separatrix surface. The forces present in the flow, both of collimating and accelerating nature, are in good agreement in both the 2.5D and the 3D runs. We conclude that the analytical solution behaves well also after relaxing the basic assumption of axisymmetry.
[22]  oai:arXiv.org:1312.4334  [pdf] - 1202272
Young stellar object jet models: From theory to synthetic observations
Comments: accepted for publication A&A, 20 pages, 11 figures
Submitted: 2013-12-16
Astronomical observations, analytical solutions and numerical simulations have provided the building blocks to formulate the current theory of young stellar object jets. Although each approach has made great progress independently, it is only during the last decade that significant efforts are being made to bring the separate pieces together. Building on previous work that combined analytical solutions and numerical simulations, we apply a sophisticated cooling function to incorporate optically thin energy losses in the dynamics. On the one hand, this allows a self-consistent treatment of the jet evolution and on the other, it provides the necessary data to generate synthetic emission maps. Firstly, analytical disk and stellar outflow solutions are properly combined to initialize numerical two-component jet models inside the computational box. Secondly, magneto-hydrodynamical simulations are performed in 2.5D, following properly the ionization and recombination of a maximum of $29$ ions. Finally, the outputs are post-processed to produce artificial observational data. The first two-component jet simulations, based on analytical models, that include ionization and optically thin radiation losses demonstrate promising results for modeling specific young stellar object outflows. The generation of synthetic emission maps provides the link to observations, as well as the necessary feedback for the further improvement of the available models.
[23]  oai:arXiv.org:1307.2232  [pdf] - 699247
CTA contributions to the 33rd International Cosmic Ray Conference (ICRC2013)
Consortium, The CTA; :; Abril, O.; Acharya, B. S.; Actis, M.; Agnetta, G.; Aguilar, J. A.; Aharonian, F.; Ajello, M.; Akhperjanian, A.; Alcubierre, M.; Aleksic, J.; Alfaro, R.; Aliu, E.; Allafort, A. J.; Allan, D.; Allekotte, I.; Aloisio, R.; Amato, E.; Ambrosi, G.; Ambrosio, M.; Anderson, J.; Angüner, E. O.; Antonelli, L. A.; Antonuccio, V.; Antonucci, M.; Antoranz, P.; Aravantinos, A.; Argan, A.; Arlen, T.; Aramo, C.; Armstrong, T.; Arnaldi, H.; Arrabito, L.; Asano, K.; Ashton, T.; Asorey, H. G.; Aune, T.; Awane, Y.; Baba, H.; Babic, A.; Baby, N.; Bähr, J.; Bais, A.; Baixeras, C.; Bajtlik, S.; Balbo, M.; Balis, D.; Balkowski, C.; Ballet, J.; Bamba, A.; Bandiera, R.; Barber, A.; Barbier, C.; Barceló, M.; Barnacka, A.; Barnstedt, J.; de Almeida, U. Barres; Barrio, J. A.; Basili, A.; Basso, S.; Bastieri, D.; Bauer, C.; Baushev, A.; Becciani, U.; Becerra, J.; Becerra, J.; Becherini, Y.; Bechtol, K. C.; Tjus, J. Becker; Beckmann, V.; Bednarek, W.; Behera, B.; Belluso, M.; Benbow, W.; Berdugo, J.; Berge, D.; Berger, K.; Bernard, F.; Bernardino, T.; Bernlöhr, K.; Bertucci, B.; Bhat, N.; Bhattacharyya, S.; Biasuzzi, B.; Bigongiari, C.; Biland, A.; Billotta, S.; Bird, T.; Birsin, E.; Bissaldi, E.; Biteau, J.; Bitossi, M.; Blake, S.; Bigas, O. Blanch; Blasi, P.; Bobkov, A.; Boccone, V.; Böttcher, M.; Bogacz, L.; Bogart, J.; Bogdan, M.; Boisson, C.; Gargallo, J. Boix; Bolmont, J.; Bonanno, G.; Bonardi, A.; Bonev, T.; Bonifacio, P.; Bonnoli, G.; Bordas, P.; Borgland, A.; Borkowski, J.; Bose, R.; Botner, O.; Bottani, A.; Bouchet, L.; Bourgeat, M.; Boutonnet, C.; Bouvier, A.; Brau-Nogué, S.; Braun, I.; Bretz, T.; Briggs, M.; Brigida, M.; Bringmann, T.; Britto, R.; Brook, P.; Brun, P.; Brunetti, L.; Bruno, P.; Bucciantini, N.; Buanes, T.; Buckley, J.; Bühler, R.; Bugaev, V.; Bulgarelli, A.; Bulik, T.; Busetto, G.; Buson, S.; Byrum, K.; Cailles, M.; Cameron, R.; Camprecios, J.; Canestrari, R.; Cantu, S.; Capalbi, M.; Caraveo, P.; Carmona, E.; Carosi, A.; Carosi, R.; Carr, J.; Carter, J.; Carton, P. -H.; Caruso, R.; Casanova, S.; Cascone, E.; Casiraghi, M.; Castellina, A.; Catalano, O.; Cavazzani, S.; Cazaux, S.; Cerchiara, P.; Cerruti, M.; Chabanne, E.; Chadwick, P.; Champion, C.; Chaves, R.; Cheimets, P.; Chen, A.; Chiang, J.; Chiappetti, L.; Chikawa, M.; Chitnis, V. R.; Chollet, F.; Christof, A.; Chudoba, J.; Cieślar, M.; Cillis, A.; Cilmo, M.; Codino, A.; Cohen-Tanugi, J.; Colafrancesco, S.; Colin, P.; Colome, J.; Colonges, S.; Compin, M.; Conconi, P.; Conforti, V.; Connaughton, V.; Conrad, J.; Contreras, J. L.; Coppi, P.; Coridian, J.; Corona, P.; Corti, D.; Cortina, J.; Cossio, L.; Costa, A.; Costantini, H.; Cotter, G.; Courty, B.; Couturier, S.; Covino, S.; Crimi, G.; Criswell, S. J.; Croston, J.; Cusumano, G.; Dafonseca, M.; Dale, O.; Daniel, M.; Darling, J.; Davids, I.; Dazzi, F.; de Angelis, A.; De Caprio, V.; De Frondat, F.; Pino, E. M. de Gouveia Dal; de la Calle, I.; De La Vega, G. A.; Lopez, R. de los Reyes; de Lotto, B.; De Luca, A.; de Naurois, M.; de Oliveira, Y.; Wilhelmi, E. de Oña; de Palma, F.; de Souza, V.; Decerprit, G.; Decock, G.; Deil, C.; Delagnes, E.; Deleglise, G.; Delgado, C.; della Volpe, D.; Demange, P.; Depaola, G.; Dettlaff, A.; Di Girolamo, T.; Di Giulio, C.; Di Paola, A.; Di Pierro, F.; di Sciascio, G.; Díaz, C.; Dick, J.; Dickherber, R.; Dickinson, H.; Diez-Blanco, V.; Digel, S.; Dimitrov, D.; Disset, G.; Djannati-Ataï, A.; Doert, M.; Dohmke, M.; Domainko, W.; Prester, D. Dominis; Donat, A.; Dorner, D.; Doro, M.; Dournaux, J. -L.; Drake, G.; Dravins, D.; Drury, L.; Dubois, F.; Dubois, R.; Dubus, G.; Dufour, C.; Dumas, D.; Dumm, J.; Durand, D.; Dwarkadas, V.; Dyks, J.; Dyrda, M.; Ebr, J.; Edy, E.; Egberts, K.; Eger, P.; Einecke, S.; Eleftheriadis, C.; Elles, S.; Emmanoulopoulos, D.; Engelhaupt, D.; Enomoto, R.; Ernenwein, J. -P.; Errando, M.; Etchegoyen, A.; Evans, P. A.; Falcone, A.; Faltenbacher, A.; Fantinel, D.; Farakos, K.; Farnier, C.; Farrell, E.; Fasola, G.; Favill, B. W.; Fede, E.; Federici, S.; Fegan, S.; Feinstein, F.; Ferenc, D.; Ferrando, P.; Fesquet, M.; Fetfatzis, P.; Fiasson, A.; Fillin-Martino, E.; Fink, D.; Finley, C.; Finley, J. P.; Fiorini, M.; Curcoll, R. Firpo; Flandrini, E.; Fleischhack, H.; Flores, H.; Florin, D.; Focke, W.; Föhr, C.; Fokitis, E.; Font, L.; Fontaine, G.; Fornasa, M.; Förster, A.; Fortson, L.; Fouque, N.; Franckowiak, A.; Franco, F. J.; Frankowski, A.; Fransson, C.; Fraser, G. W.; Frei, R.; Fresnillo, L.; Fruck, C.; Fugazza, D.; Fujita, Y.; Fukazawa, Y.; Fukui, Y.; Funk, S.; Gäbele, W.; Gabici, S.; Gabriele, R.; Gadola, A.; Galante, N.; Gall, D.; Gallant, Y.; Gámez-García, J.; Garczarczyk, M.; García, B.; López, R. Garcia; Gardiol, D.; Gargano, F.; Garrido, D.; Garrido, L.; Gascon, D.; Gaug, M.; Gaweda, J.; Gebremedhin, L.; Geffroy, N.; Gerard, L.; Ghedina, A.; Ghigo, M.; Ghislain, P.; Giannakaki, E.; Gianotti, F.; Giarrusso, S.; Giavitto, G.; Giebels, B.; Giglietto, N.; Gika, V.; Giomi, M.; Giommi, P.; Giordano, F.; Girard, N.; Giro, E.; Giuliani, A.; Glanzman, T.; Glicenstein, J. -F.; Godinovic, N.; Golev, V.; Berisso, M. Gomez; Gómez-Ortega, J.; Gonzalez, M. M.; González, A.; González, F.; Muñoz, A. González; Gothe, K. S.; Grabarczyk, T.; Gougerot, M.; Graciani, R.; Grandi, P.; Grañena, F.; Granot, J.; Grasseau, G.; Gredig, R.; Green, A.; Greenshaw, T.; Grégoire, T.; Grillo, A.; Grimm, O.; Grondin, M. -H.; Grube, J.; Grudzinska, M.; Gruev, V.; Grünewald, S.; Grygorczuk, J.; Guarino, V.; Gunji, S.; Gyuk, G.; Hadasch, D.; Hagedorn, A.; Hagiwara, R.; Hahn, J.; Hakansson, N.; Hallgren, A.; Heras, N. Hamer; Hara, S.; Hardcastle, M. J.; Harezlak, D.; Harris, J.; Hassan, T.; Hatanaka, K.; Haubold, T.; Haupt, A.; Hayakawa, T.; Hayashida, M.; Heller, R.; Henault, F.; Henri, G.; Hermann, G.; Hermel, R.; Herrero, A.; Hervet, O.; Hidaka, N.; Hinton, J. A.; Hirotani, K.; Hoffmann, D.; Hofmann, W.; Hofverberg, P.; Holder, J.; Hörandel, J. R.; Horns, D.; Horville, D.; Houles, J.; Hrabovsky, M.; Hrupec, D.; Huan, H.; Huber, B.; Huet, J. -M.; Hughes, G.; Humensky, T. B.; Huovelin, J.; Huppert, J. -F.; Ibarra, A.; Ikawa, D.; Illa, J. M.; Impiombato, D.; Incorvaia, S.; Inoue, S.; Inoue, Y.; Iocco, F.; Ioka, K.; Israel, G. L.; Jablonski, C.; Jacholkowska, A.; Jacquemier, J.; Jamrozy, M.; Janiak, M.; Jean, P.; Jeanney, C.; Jimenez, J. J.; Jogler, T.; Johnson, C.; Johnson, T.; Journet, L.; Juffroy, C.; Jung, I.; Kaaret, P.; Kabuki, S.; Kagaya, M.; Kakuwa, J.; Kalkuhl, C.; Kankanyan, R.; Karastergiou, A.; Kärcher, K.; Karczewski, M.; Karkar, S.; Kasperek, J.; Kastana, D.; Katagiri, H.; Kataoka, J.; Katarzyński, K.; Katz, U.; Kawanaka, N.; Kazanas, D.; Kelley-Hoskins, N.; Kellner-Leidel, B.; Kelly, H.; Kendziorra, E.; Khélifi, B.; Kieda, D. B.; Kifune, T.; Kihm, T.; Kishimoto, T.; Kitamoto, K.; Kluźniak, W.; Knapic, C.; Knapp, J.; Knödlseder, J.; Köck, F.; Kocot, J.; Kodani, K.; Köhne, J. -H.; Kohri, K.; Kokkotas, K.; Kolitzus, D.; Komin, N.; Kominis, I.; Konno, Y.; Köppel, H.; Korohoda, P.; Kosack, K.; Koss, G.; Kossakowski, R.; Koul, R.; Kowal, G.; Koyama, S.; Kozioł, J.; Krähenbühl, T.; Krause, J.; Krawzcynski, H.; Krennrich, F.; Krepps, A.; Kretzschmann, A.; Krobot, R.; Krueger, P.; Kubo, H.; Kudryavtsev, V. A.; Kushida, J.; Kuznetsov, A.; La Barbera, A.; La Palombara, N.; La Parola, V.; La Rosa, G.; Lacombe, K.; Lamanna, G.; Lande, J.; Languignon, D.; Lapington, J. S.; Laporte, P.; Laurent, B.; Lavalley, C.; Flour, T. Le; Padellec, A. Le; Lee, S. -H.; Lee, W. H.; Lefèvre, J. -P.; Leich, H.; de Oliveira, M. A. Leigui; Lelas, D.; Lenain, J. -P.; Leoni, R.; Leopold, D. J.; Lerch, T.; Lessio, L.; Leto, G.; Lieunard, B.; Lieunard, S.; Lindemann, R.; Lindfors, E.; Liolios, A.; Lipniacka, A.; Lockart, H.; Lohse, T.; Lombardi, S.; Longo, F.; Lopatin, A.; Lopez, M.; López-Coto, R.; López-Oramas, A.; Lorca, A.; Lorenz, E.; Louis, F.; Lubinski, P.; Lucarelli, F.; Lüdecke, H.; Ludwin, J.; Luque-Escamilla, P. L.; Lustermann, W.; Luz, O.; Lyard, E.; Maccarone, M. C.; Maccarone, T. J.; Madejski, G. M.; Madhavan, A.; Mahabir, M.; Maier, G.; Majumdar, P.; Malaguti, G.; Malaspina, G.; Maltezos, S.; Manalaysay, A.; Mancilla, A.; Mandat, D.; Maneva, G.; Mangano, A.; Manigot, P.; Mannheim, K.; Manthos, I.; Maragos, N.; Marcowith, A.; Mariotti, M.; Marisaldi, M.; Markoff, S.; Marszałek, A.; Martens, C.; Martí, J.; Martin, J. -M.; Martin, P.; Martínez, G.; Martínez, F.; Martínez, M.; Massaro, F.; Masserot, A.; Mastichiadis, A.; Mathieu, A.; Matsumoto, H.; Mattana, F.; Mattiazzo, S.; Maurer, A.; Maurin, G.; Maxfield, S.; Maya, J.; Mazin, D.; Comb, L. Mc; McCann, A.; McCubbin, N.; McHardy, I.; McKay, R.; Meagher, K.; Medina, C.; Melioli, C.; Melkumyan, D.; Melo, D.; Mereghetti, S.; Mertsch, P.; Meucci, M.; Meyer, M.; Michałowski, J.; Micolon, P.; Mihailidis, A.; Mineo, T.; Minuti, M.; Mirabal, N.; Mirabel, F.; Miranda, J. M.; Mirzoyan, R.; Mistò, A.; Mizuno, T.; Moal, B.; Moderski, R.; Mognet, I.; Molinari, E.; Molinaro, M.; Montaruli, T.; Monte, C.; Monteiro, I.; Moore, P.; Olaizola, A. Moralejo; Mordalska, M.; Morello, C.; Mori, K.; Morlino, G.; Morselli, A.; Mottez, F.; Moudden, Y.; Moulin, E.; Mrusek, I.; Mukherjee, R.; Munar-Adrover, P.; Muraishi, H.; Murase, K.; Murphy, A. StJ.; Nagataki, S.; Naito, T.; Nakajima, D.; Nakamori, T.; Nakayama, K.; Naumann, C.; Naumann, D.; Naumann-Godo, M.; Nayman, P.; Nedbal, D.; Neise, D.; Nellen, L.; Neronov, A.; Neustroev, V.; Neyroud, N.; Nicastro, L.; Nicolau-Kukliński, J.; Niedźwiecki, A.; Niemiec, J.; Nieto, D.; Nikolaidis, A.; Nishijima, K.; Nishikawa, K. -I.; Noda, K.; Nolan, S.; Northrop, R.; Nosek, D.; Nowak, N.; Nozato, A.; Oakes, L.; O'Brien, P. T.; Ohira, Y.; Ohishi, M.; Ohm, S.; Ohoka, H.; Okuda, T.; Okumura, A.; Olive, J. -F.; Ong, R. A.; Orito, R.; Orr, M.; Osborne, J. P.; Ostrowski, M.; Otero, L. A.; Otte, N.; Ovcharov, E.; Oya, I.; Ozieblo, A.; Padilla, L.; Pagano, I.; Paiano, S.; Paillot, D.; Paizis, A.; Palanque, S.; Palatka, M.; Pallota, J.; Palatiello, M.; Panagiotidis, K.; Panazol, J. -L.; Paneque, D.; Panter, M.; Panzera, M. R.; Paoletti, R.; Papayannis, A.; Papyan, G.; Paredes, J. M.; Pareschi, G.; Parraud, J. -M.; Parsons, D.; Pauletta, G.; Arribas, M. Paz; Pech, M.; Pedaletti, G.; Pelassa, V.; Pelat, D.; Perez, M. d. C.; Persic, M.; Petrucci, P. -O.; Peyaud, B.; Pichel, A.; Pieloth, D.; Pierre, E.; Pita, S.; Pivato, G.; Pizzolato, F.; Platino, M.; Platos, Ł.; Platzer, R.; Podkladkin, S.; Pogosyan, L.; Pohl, M.; Pojmanski, G.; Ponz, J. D.; Potter, W.; Poutanen, J.; Prandini, E.; Prast, J.; Preece, R.; Profeti, F.; Prokoph, H.; Prouza, M.; Proyetti, M.; Puerto-Giménez, I.; Pühlhofer, G.; Puljak, I.; Punch, M.; Pyzioł, R.; Quel, E. J.; Quesada, J.; Quinn, J.; Quirrenbach, A.; Racero, E.; Rainò, S.; Rajda, P. J.; Rameez, M.; Ramon, P.; Rando, R.; Rannot, R. C.; Rataj, M.; Raue, M.; Ravignani, D.; Reardon, P.; Reimann, O.; Reimer, A.; Reimer, O.; Reitberger, K.; Renaud, M.; Renner, S.; Reville, B.; Rhode, W.; Ribó, M.; Ribordy, M.; Richards, G.; Richer, M. G.; Rico, J.; Ridky, J.; Rieger, F.; Ringegni, P.; Ripken, J.; Ristori, P. R.; Rivière, A.; Rivoire, S.; Rob, L.; Rodeghiero, G.; Roeser, U.; Rohlfs, R.; Rojas, G.; Romano, P.; Romaszkan, W.; Romero, G. E.; Rosen, S. R.; Lees, S. Rosier; Ross, D.; Rouaix, G.; Rousselle, J.; Rousselle, S.; Rovero, A. C.; Roy, F.; Royer, S.; Rudak, B.; Rulten, C.; Rupiński, M.; Russo, F.; Ryde, F.; Saavedra, O.; Sacco, B.; Saemann, E. O.; Saggion, A.; Sahakian, V.; Saito, K.; Saito, T.; Saito, Y.; Sakaki, N.; Sakonaka, R.; Salini, A.; Sanchez, F.; Sanchez-Conde, M.; Sandoval, A.; Sandaker, H.; Sant'Ambrogio, E.; Santangelo, A.; Santos, E. M.; Sanuy, A.; Sapozhnikov, L.; Sarkar, S.; Sartore, N.; Sasaki, H.; Satalecka, K.; Sawada, M.; Scalzotto, V.; Scapin, V.; Scarcioffolo, M.; Schafer, J.; Schanz, T.; Schlenstedt, S.; Schlickeiser, R.; Schmidt, T.; Schmoll, J.; Schovanek, P.; Schroedter, M.; Schubert, A.; Schultz, C.; Schultze, J.; Schulz, A.; Schure, K.; Schussler, F.; Schwab, T.; Schwanke, U.; Schwarz, J.; Schwarzburg, S.; Schweizer, T.; Schwemmer, S.; Schwendicke, U.; Schwerdt, C.; Segreto, A.; Seiradakis, J. -H.; Sembroski, G. H.; Servillat, M.; Seweryn, K.; Sharma, M.; Shayduk, M.; Shellard, R. C.; Shi, J.; Shibata, T.; Shibuya, A.; Shore, S.; Shum, E.; Sideras-Haddad, E.; Sidoli, L.; Sidz, M.; Sieiro, J.; Sikora, M.; Silk, J.; Sillanpää, A.; Singh, B. B.; Sironi, G.; Sitarek, J.; Skole, C.; Smareglia, R.; Smith, A.; Smith, D.; Smith, J.; Smith, N.; Sobczyńska, D.; Sol, H.; Sottile, G.; Sowiński, M.; Spanier, F.; Spiga, D.; Spyrou, S.; Stamatescu, V.; Stamerra, A.; Starling, R. L. C.; Stawarz, Ł.; Steenkamp, R.; Stegmann, C.; Steiner, S.; Stella, C.; Stergioulas, N.; Sternberger, R.; Sterzel, M.; Stinzing, F.; Stodulski, M.; Stolarczyk, Th.; Straumann, U.; Strazzeri, E.; Stringhetti, L.; Suarez, A.; Suchenek, M.; Sugawara, R.; Sulanke, K. -H.; Sun, S.; Supanitsky, A. D.; Suric, T.; Sutcliffe, P.; Sykes, J. M.; Szanecki, M.; Szepieniec, T.; Szostek, A.; Tagliaferri, G.; Tajima, H.; Takahashi, H.; Takahashi, K.; Takalo, L.; Takami, H.; Talbot, G.; Tammi, J.; Tanaka, M.; Tanaka, S.; Tasan, J.; Tavani, M.; Tavernet, J. -P.; Tejedor, L. A.; Telezhinsky, I.; Temnikov, P.; Tenzer, C.; Terada, Y.; Terrier, R.; Teshima, M.; Testa, V.; Tezier, D.; Thayer, J.; Thuermann, D.; Tibaldo, L.; Tibaldo, L.; Tibolla, O.; Tiengo, A.; Timpanaro, M. C.; Tluczykont, M.; Peixoto, C. J. Todero; Tokanai, F.; Tokarz, M.; Toma, K.; Tonachini, A.; Torii, K.; Tornikoski, M.; Torres, D. F.; Torres, M.; Toscano, S.; Toso, G.; Tosti, G.; Totani, T.; Toussenel, F.; Tovmassian, G.; Travnicek, P.; Treves, A.; Trifoglio, M.; Troyano, I.; Tsinganos, K.; Ueno, H.; Umana, G.; Umehara, K.; Upadhya, S. S.; Usher, T.; Uslenghi, M.; Vagnetti, F.; Valdes-Galicia, J. F.; Vallania, P.; Vallejo, G.; van Driel, W.; van Eldik, C.; Vandenbrouke, J.; Vanderwalt, J.; Vankov, H.; Vasileiadis, G.; Vassiliev, V.; Veberic, D.; Vegas, I.; Vercellone, S.; Vergani, S.; Verzi, V.; Vettolani, G. P.; Veyssière, C.; Vialle, J. P.; Viana, A.; Videla, M.; Vigorito, C.; Vincent, P.; Vincent, S.; Vink, J.; Vlahakis, N.; Vlahos, L.; Vogler, P.; Voisin, V.; Vollhardt, A.; von Gunten, H. -P.; Vorobiov, S.; Vuerli, C.; Waegebaert, V.; Wagner, R.; Wagner, R. G.; Wagner, S.; Wakely, S. P.; Walter, R.; Walther, T.; Warda, K.; Warwick, R. S.; Wawer, P.; Wawrzaszek, R.; Webb, N.; Wegner, P.; Weinstein, A.; Weitzel, Q.; Welsing, R.; Werner, M.; Wetteskind, H.; White, R. J.; Wierzcholska, A.; Wiesand, S.; Wilhelm, A.; Wilkinson, M. I.; Williams, D. A.; Willingale, R.; Winde, M.; Winiarski, K.; Wischnewski, R.; Wiśniewski, Ł.; Wojcik, P.; Wood, M.; Wörnlein, A.; Xiong, Q.; Yadav, K. K.; Yamamoto, H.; Yamamoto, T.; Yamazaki, R.; Yanagita, S.; Yebras, J. M.; Yelos, D.; Yoshida, A.; Yoshida, T.; Yoshikoshi, T.; Yu, P.; Zabalza, V.; Zacharias, M.; Zajczyk, A.; Zampieri, L.; Zanin, R.; Zdziarski, A.; Zech, A.; Zhao, A.; Zhou, X.; Zietara, K.; Ziolkowski, J.; Ziółkowski, P.; Zitelli, V.; Zurbach, C.; Zychowski, P.
Comments: Index of CTA conference proceedings at the ICRC2013, Rio de Janeiro (Brazil). v1: placeholder with no arXiv links yet, to be replaced once individual contributions have been all submitted. v2: final with arXiv links to all CTA contributions and full author list
Submitted: 2013-07-08, last modified: 2013-07-29
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
[24]  oai:arXiv.org:1210.3816  [pdf] - 1152109
Counterrotation in magnetocentrifugally driven jets and other winds
Comments: To appear in ApJL
Submitted: 2012-10-14
Rotation measurement in jets from T Tauri stars is a rather difficult task. Some jets seem to be rotating in a direction opposite to that of the underlying disk, although it is not yet clear if this affects the totality or part of the outflows. On the other hand, Ulysses data also suggest that the solar wind may rotate in two opposite ways between the northern and southern hemispheres. We show that this result is not as surprising as it may seem and that it emerges naturally from the ideal MHD equations. Specifically, counterrotating jets neither contradict the magnetocentrifugal driving of the flow nor prevent extraction of angular momentum from the disk. The demonstration of this result is shown by combining the ideal MHD equations for steady axisymmetric flows. Provided that the jet is decelerated below some given threshold beyond the Alfven surface, the flow will change its direction of rotation locally or globally. Counterrotation is also possible for only some layers of the outflow at specific altitudes along the jet axis. We conclude that the counterrotation of winds or jets with respect to the source, star or disk, is not in contradiction with the magnetocentrifugal driving paradigm. This phenomenon may affect part of the outflow, either in one hemisphere, or only in some of the outflow layers. From a time-dependent simulation, we illustrate this effect and show that it may not be permanent.
[25]  oai:arXiv.org:1208.0927  [pdf] - 1150520
Velocity asymmetries in YSO jets: Intrinsic and extrinsic mechanisms
Comments: accepted for publication in A&A
Submitted: 2012-08-04
It is a well established fact that some YSO jets (e.g. RW Aur) display different propagation speeds between their blue and red shifted parts, a feature possibly associated with the central engine or the environment in which the jet propagates. In order to understand the origin of asymmetric YSO jet velocities, we investigate the efficiency of two candidate mechanisms, one based on the intrinsic properties of the system and one based on the role of the external medium. In particular, a parallel or anti-parallel configuration between the protostellar magnetosphere and the disk magnetic field is considered and the resulting dynamics are examined both in an ideal and a resistive magneto-hydrodynamical (MHD) regime. Moreover, we explore the effects of a potential difference in the pressure of the environment, as a consequence of the non-uniform density distribution of molecular clouds. Ideal and resistive axisymmetric numerical simulations are carried out for a variety of models, all of which are based on a combination of two analytical solutions, a disk wind and a stellar outflow. We find that jet velocity asymmetries can indeed occur both when multipolar magnetic moments are present in the star-disk system as well as when non-uniform environments are considered. The latter case is an external mechanism that can easily explain the large time scale of the phenomenon, whereas the former one naturally relates it to the YSO intrinsic properties. [abridged]
[26]  oai:arXiv.org:1206.0126  [pdf] - 1123826
Study of the three-dimensional shape and dynamics of coronal loops observed by Hinode/EIS
Comments: 17 pages, 6 figures
Submitted: 2012-06-01
We study plasma flows along selected coronal loops in NOAA Active Region 10926, observed on 3 December 2006 with Hinode's EUV Imaging Spectrograph (EIS). From the shape of the loops traced on intensity images and the Doppler shifts measured along their length we compute their three-dimensional (3D) shape and plasma flow velocity using a simple geometrical model. This calculation was performed for loops visible in the Fe VIII 185 Ang., Fe X 184 Ang., Fe XII 195 Ang., Fe XIII 202 Ang., and Fe XV 284 Ang. spectral lines. In most cases the flow is unidirectional from one footpoint to the other but there are also cases of draining motions from the top of the loops to their footpoints. Our results indicate that the same loop may show different flow patterns when observed in different spectral lines, suggesting a dynamically complex rather than a monolithic structure. We have also carried out magnetic extrapolations in the linear force-free field approximation using SOHO/MDI magnetograms, aiming toward a first-order identification of extrapolated magnetic field lines corresponding to the reconstructed loops. In all cases, the best-fit extrapolated lines exhibit left-handed twist (alpha < 0), in agreement with the dominant twist of the region.
[27]  oai:arXiv.org:1201.0162  [pdf] - 1092659
Uncovering the Birth of a Coronal Mass Ejection from Two-Viewpoint SECCHI Observations
Comments: 18 pages, 8 figures, to appear in Solar Physics Topical Issue "Advances of European Solar Physics"
Submitted: 2011-12-30
We investigate the initiation and formation of Coronal Mass Ejections (CMEs) via detailed two-viewpoint analysis of low corona observations of a relatively fast CME acquired by the SECCHI instruments aboard the STEREO mission. The event which occurred on January 2, 2008, was chosen because of several unique characteristics. It shows upward motions for at least four hours before the flare peak. Its speed and acceleration profiles exhibit a number of inflections which seem to have a direct counterpart in the GOES light curves. We detect and measure, in 3D, loops that collapse toward the erupting channel while the CME is increasing in size and accelerates. We suggest that these collapsing loops are our first evidence of magnetic evacuation behind the forming CME flux rope. We report the detection of a hot structure which becomes the core of the white light CME. We observe and measure unidirectional flows along the erupting filament channel which may be associated with the eruption process. Finally, we compare these observations to the predictions from the standard flare-CME model and find a very satisfactory agreement. We conclude that the standard flare-CME concept is a reliable representation of the initial stages of CMEs and that multi-viewpoint, high cadence EUV observations can be extremely useful in understanding the formation of CMEs.
[28]  oai:arXiv.org:1107.2510  [pdf] - 1077936
Nonradial and nonpolytropic astrophysical outflows IX. Modeling T Tauri jets with a low mass-accretion rate
Comments:
Submitted: 2011-07-13
Context: A large sample of T Tauri stars exhibits optical jets, approximately half of which rotate slowly, only at ten per cent of their breakup velocity. The disk-locking mechanism has been shown to be inefficient to explain this observational fact. Aims: We show that low mass accreting T Tauri stars may have a strong stellar jet component that can effectively brake the star to the observed rotation speed. Methods: By means of a nonlinear separation of the variables in the full set of the MHD equations we construct semi- analytical solutions describing the dynamics and topology of the stellar component of the jet that emerges from the corona of the star. Results: We analyze two typical solutions with the same mass loss rate but different magnetic lever arms and jet radii. The first solution with a long lever arm and a wide jet radius effectively brakes the star and can be applied to the visible jets of T Tauri stars, such as RY Tau. The second solution with a shorter lever arm and a very narrow jet radius may explain why similar stars, either Weak line T Tauri Stars (WTTS) or Classical T Tauri Stars (CTTS) do not all have visible jets. For instance, RY Tau itself seems to have different phases that probably depend on the activity of the star. Conclusions: First, stellar jets seem to be able to brake pre-main sequence stars with a low mass accreting rate. Second, jets may be visible only part time owing to changes in their boundary conditions. We also suggest a possible scenario for explaining the dichotomy between CTTS and WTTS, which rotate faster and do not have visible jets.
[29]  oai:arXiv.org:1006.2073  [pdf] - 1033033
Relativistic spine jets from Schwarzschild black holes: "Application to AGN radioloud sources"
Comments: Accepted for publication in the A&A
Submitted: 2010-06-10
The two types of Fanaroff-Riley radio loud galaxies, FRI and FRII, exhibit strong jets but with different properties. These differences may be associated to the central engine and/or the external medium. Aims: The AGN classification FRI and FRII can be linked to the rate of electromagnetic Poynting flux extraction from the inner corona of the central engine by the jet. The collimation results from the distribution of the total electromagnetic energy across the jet, as compared to the corresponding distribution of the thermal and gravitational energies. We use exact solutions of the fully relativistic magnetohydrodynamical (GRMHD) equations obtained by a nonlinear separation of the variables to study outflows from a Schwarzschild black hole corona. A strong correlation is found between the jet features and the energetic distribution of the plasma of the inner corona which may be related to the efficiency of the magnetic rotator. It is shown that observations of FRI and FRII jets may be partially constrained by our model for spine jets. The deceleration observed in FRI jets may be associated with a low magnetic efficiency of the central magnetic rotator and an important thermal confinement by the hot surrounding medium. Conversely, the strongly collimated and accelerated FRII outflows may be self collimated by their own magnetic field because of the high efficiency of the central magnetic rotator.
[30]  oai:arXiv.org:1005.0383  [pdf] - 1026642
Comparison of synthetic maps from truncated jet-formation models with YSO jet observations
Comments: accepted for publication in A & A, 14 pages, 21 figures
Submitted: 2010-05-03
(abridged) Significant progress has been made in the last years in the understanding of the jet formation mechanism through a combination of numerical simulations and analytical MHD models for outflows characterized by the symmetry of self-similarity. In a previous article we introduced models of truncated jets from disks, i.e. evolved in time numerical simulations based on a radially self-similar MHD solution, but including the effects of a finite radius of the jet-emitting disk and thus the outflow. These models need now to be compared with available observational data. A direct comparison of the results of combined analytical theoretical models and numerical simulations with observations has not been performed as yet. In order to compare our models with observed jet widths inferred from recent optical images taken with HST and AO observations, we use a new set of tools to create emission maps in different forbidden lines, from which we determine the jet width as the FWHM of the emission. It is shown that the untruncated analytical disk outflow solution considered here cannot fit the small jet widths inferred by observations of several jets. Various truncated disk-wind models are examined, whose extracted jet widths range from higher to lower values compared to the observations. Thus we can fit the observed range of jet widths by tuning our models. We conclude that truncation is necessary to reproduce the observed jet widths and our simulations limit the possible range of truncation radii. We infer that the truncation radius, which is the radius on the disk mid-plane where the jet-emitting disk switches to a standard disk, must be between around 0.1 up to about 1 AU in the observed sample for the considered disk-wind solution. One disk-wind simulation with an inner truncation radius at about 0.11 AU also shows potential for reproducing the observations, but a parameter study is needed.
[31]  oai:arXiv.org:1003.2349  [pdf] - 129484
Recurrent solar jets in active regions
Comments: 4 pages, 3 figures, accepted for publication (A&A)
Submitted: 2010-03-11
We study the emergence of a toroidal flux tube into the solar atmosphere and its interaction with a pre-existing field of an active region. We investigate the emission of jets as a result of repeated reconnection events between colliding magnetic fields. We perform 3D simulations by solving the time-dependent, resistive MHD equations in a highly stratified atmosphere. A small active region field is constructed by the emergence of a toroidal magnetic flux tube. A current structure is build up and reconnection sets in when new emerging flux comes into contact with the ambient field of the active region. The topology of the magnetic field around the current structure is drastically modified during reconnection. The modification results in a formation of new magnetic systems that eventually collide and reconnect. We find that reconnection jets are taking place in successive recurrent phases in directions perpendicular to each other, while in each phase they release magnetic energy and hot plasma into the solar atmosphere. After a series of recurrent appearance of jets, the system approaches an equilibrium where the efficiency of the reconnection is substantially reduced. We deduce that the emergence of new magnetic flux introduces a perturbation to the active region field, which in turn causes reconnection between neighboring magnetic fields and the release of the trapped energy in the form of jet-like emissions. This is the first time that self-consistent recurrency of jets in active regions is shown in a three-dimensional experiment of magnetic flux emergence.
[32]  oai:arXiv.org:0906.3254  [pdf] - 1002596
Resistive MHD jet simulations with large resistivity
Comments: To appear in the proceedings of the "Protostellar Jets in Context" conference held on the island of Rhodes, Greece (7-12 July 2008)
Submitted: 2009-06-17
Axisymmetric resistive MHD simulations for radially self-similar initial conditions are performed, using the NIRVANA code. The magnetic diffusivity could occur in outflows above an accretion disk, being transferred from the underlying disk into the disk corona by MHD turbulence (anomalous turbulent diffusivity), or as a result of ambipolar diffusion in partially ionized flows. We introduce, in addition to the classical magnetic Reynolds number Rm, which measures the importance of resistive effects in the induction equation, a new number Rb, which measures the importance of the resistive effects in the energy equation. We find two distinct regimes of solutions in our simulations. One is the low-resistivity regime, in which results do not differ much from ideal-MHD solutions. In the high-resistivity regime, results seem to show some periodicity in time-evolution, and depart significantly from the ideal-MHD case. Whether this departure is caused by numerical or physical reasons is of considerable interest for numerical simulations and theory of astrophysical outflows and is currently investigated.
[33]  oai:arXiv.org:0905.4167  [pdf] - 1002349
Two-component jet simulations: Combining analytical and numerical approaches
Comments: To appear in the proceedings of the "Protostellar Jets in Context" conference held on the island of Rhodes, Greece (7-12 July 2008)
Submitted: 2009-05-26
Recent observations as well as theoretical studies of YSO jets suggest the presence of two steady components: a disk wind type outflow needed to explain the observed high mass loss rates and a stellar wind type outflow probably accounting for the observed stellar spin down. In this framework, we construct numerical two-component jet models by properly mixing an analytical disk wind solution with a complementary analytically derived stellar outflow. Their combination is controlled by both spatial and temporal parameters, in order to address different physical conditions and time variable features. We study the temporal evolution and the interaction of the two jet components on both small and large scales. The simulations reach steady state configurations close to the initial solutions. Although time variability is not found to considerably affect the dynamics, flow fluctuations generate condensations, whose large scale structures have a strong resemblance to observed YSO jet knots.
[34]  oai:arXiv.org:0905.3519  [pdf] - 1002314
Two-component jet simulations: II. Combining analytical disk and stellar MHD outflow solutions
Comments: accepted for publication in A&A
Submitted: 2009-05-21
Theoretical arguments along with observational data of YSO jets suggest the presence of two steady components: a disk wind type outflow needed to explain the observed high mass loss rates and a stellar wind type outflow probably accounting for the observed stellar spin down. Each component's contribution depends on the intrinsic physical properties of the YSO-disk system and its evolutionary stage. The main goal of this paper is to understand some of the basic features of the evolution, interaction and co-existence of the two jet components over a parameter space and when time variability is enforced. Having studied separately the numerical evolution of each type of the complementary disk and stellar analytical wind solutions in Paper I of this series, we proceed here to mix together the two models inside the computational box. The evolution in time is performed with the PLUTO code, investigating the dynamics of the two-component jets, the modifications each solution undergoes and the potential steady state reached.
[35]  oai:arXiv.org:0901.2634  [pdf] - 315509
Synthetic synchrotron emission maps from MHD models for the jet of M87
Comments: 9 pages, 9 figures, accepted by ApJ
Submitted: 2009-01-17
We present self-consistent global, steady-state MHD models and synthetic optically thin synchrotron emission maps for the jet of M87. The model consist of two distinct zones: an inner relativistic outflow, which we identify with the observed jet, and an outer cold disk-wind. While the former does not self-collimate efficiently due to its high effective inertia, the latter fulfills all the conditions for efficient collimation by the magneto-centrifugal mechanism. Given the right balance between the effective inertia of the inner flow and the collimation efficiency of the outer disk wind, the relativistic flow is magnetically confined into a well collimated beam and matches the measurements of the opening angle of M87 over several orders of magnitude in spatial extent. The synthetic synchrotron maps reproduce the morphological structure of the jet of M87, i.e. center-bright profiles near the core and limb-bright profiles away from the core. At the same time, they also show a local increase of brightness at some distance along the axis associated to a recollimation shock in the MHD model. Its location coincides with the position of the optical knot HST-1. In addition our best fitting model is consistent with a number of observational constraints such as the magnetic field in the knot HST-1, and the jet-to-counterjet brightness ratio.
[36]  oai:arXiv.org:0809.1652  [pdf] - 16143
Stability and structure of analytical MHD jet formation models with a finite outer disk radius
Comments: 14 pages, 15 figures, accepted for publication in A & A
Submitted: 2008-09-09
(Abridged) Finite radius accretion disks are a strong candidate for launching astrophysical jets from their inner parts and disk-winds are considered as the basic component of such magnetically collimated outflows. The only available analytical MHD solutions for describing disk-driven jets are those characterized by the symmetry of radial self-similarity. Radially self-similar MHD models, in general, have two geometrical shortcomings, a singularity at the jet axis and the non-existence of an intrinsic radial scale, i.e. the jets formally extend to radial infinity. Hence, numerical simulations are necessary to extend the analytical solutions towards the axis and impose a physical boundary at finite radial distance. We focus here on studying the effects of imposing an outer radius of the underlying accreting disk (and thus also of the outflow) on the topology, structure and variability of a radially self-similar analytical MHD solution. The initial condition consists of a hybrid of an unchanged and a scaled-down analytical solution, one for the jet and the other for its environment. In all studied cases, we find at the end steady two-component solutions.
[37]  oai:arXiv.org:0806.3436  [pdf] - 13753
Resistive jet simulations extending radially self-similar magnetohydrodynamic models
Comments: Accepted for publication in MNRAS
Submitted: 2008-06-20
Numerical simulations with self-similar initial and boundary conditions provide a link between theoretical and numerical investigations of jet dynamics. We perform axisymmetric resistive magnetohydrodynamic (MHD) simulations for a generalised solution of the Blandford & Payne type, and compare them with the corresponding analytical and numerical ideal-MHD solutions. We disentangle the effects of the numerical and physical diffusivity. The latter could occur in outflows above an accretion disk, being transferred from the underlying disk into the disk corona by MHD turbulence (anomalous turbulent diffusivity), or as a result of ambipolar diffusion in partially ionized flows. We conclude that while the classical magnetic Reynolds number $R_{\rm m}$ measures the importance of resistive effects in the induction equation, a new introduced number, $\rbeta=(\beta/2)R_{\rm m}$ with $\beta$ the plasma beta, measures the importance of the resistive effects in the energy equation. Thus, in magnetised jets with $\beta<2$, when $\rbeta \la 1$ resistive effects are non-negligible and affect mostly the energy equation. The presented simulations indeed show that for a range of magnetic diffusivities corresponding to $\rbeta \ga 1$ the flow remains close to the ideal-MHD self-similar solution.
[38]  oai:arXiv.org:0712.2734  [pdf] - 8211
MHD models and synthetic synchrotron maps for the jet of M87
Comments: 4 pages, 5 figures, to appear in the proceedings of the HEPRO conference, September 24-28, 2007, Dublin, Ireland
Submitted: 2007-12-17
We present a self-consistent MHD model for the jet of M87. The model consist of two distinct zones: an inner relativistic outflow, which we identify with the observed jet, and an outer cold disk-wind. While the former does not self-collimate efficiently due to its high effective inertia, the latter fulfills all the conditions for efficient collimation by the magneto-centrifugal mechanism. Given the right balance between the effective inertia of the inner flow and the collimation efficiency of the outer disk wind, the relativistic flow is magnetically confined into a well collimated beam for a wide range of parameters and matches the measurements of the opening angle of M87 over several orders of magnitude in spatial extent. In the second part of this work, we present synthetic synchrotron emission maps for our MHD models. In principle the two-zone model can reproduce the morphological structure seen in radio observations, as central-peaked profiles across the jet close the the source, limb-bright further down the jet, and a bright knot close to the position of HST-1. However it is difficult to reconcile all features into a single set of parameters.
[39]  oai:arXiv.org:0710.3406  [pdf] - 6146
Two-component jet simulations: I. Topological stability of analytical MHD outflow solutions
Comments: Accepted for publication in A&A
Submitted: 2007-10-17
Observations of collimated outflows in young stellar objects indicate that several features of the jets can be understood by adopting the picture of a two-component outflow, wherein a central stellar component around the jet axis is surrounded by an extended disk-wind. The precise contribution of each component may depend on the intrinsic physical properties of the YSO-disk system as well as its evolutionary stage. In this context, the present article starts a systematic investigation of two-component jet models via time-dependent simulations of two prototypical and complementary analytical solutions, each closely related to the properties of stellar-outflows and disk-winds. These models describe a meridionally and a radially self-similar exact solution of the steady-state, ideal hydromagnetic equations, respectively. By using the PLUTO code to carry out the simulations, the study focuses on the topological stability of each of the two analytical solutions, which are successfully extended to all space by removing their singularities. In addition, their behavior and robustness over several physical and numerical modifications is extensively examined. It is found that radially self-similar solutions (disk-winds) always reach a final steady-state while maintaining all their well-defined properties. The different ways to replace the singular part of the solution around the symmetry axis, being a first approximation towards a two-component outflow, lead to the appearance of a shock at the super-fast domain corresponding to the fast magnetosonic separatrix surface. Conversely, the asymptotic configuration and the stability of meridionally self-similar models (stellar-winds) is related to the heating processes at the base of the wind.
[40]  oai:arXiv.org:astro-ph/0507634  [pdf] - 74803
Jet simulations extending radially self-similar MHD models
Comments: 11 pages, 8 figures, minor changes to match the version accepted by MNRAS
Submitted: 2005-07-27, last modified: 2005-12-08
We perform a numerical simulation of magnetohydrodynamic radially self-similar jets, whose prototype is the Blandford & Payne analytical example. The reached final steady state is valid close to the rotation axis and also at large distances above the disk where the classical analytical model fails to provide physically acceptable solutions. The outflow starts with a sub-slow magnetosonic speed which subsequently crosses all relevant MHD critical points and corresponding magnetosonic separatrix surfaces. The characteristics are plotted together with the Mach cones and the super-fast magnetosonic outflow satisfies MHD causality. The final solution remains close enough to the analytical one which is thus shown to be topologically stable and robust for various boundary conditions.
[41]  oai:arXiv.org:astro-ph/0510606  [pdf] - 77102
Nonradial and nonpolytropic astrophysical outflows VIII. A GRMHD generalization for relativistic jets
Comments: 20 page, Accepted in A&A 10/10/2005
Submitted: 2005-10-20
Steady axisymmetric outflows originating at the hot coronal magnetosphere of a Schwarzschild black hole and surrounding accretion disk are studied in the framework of general relativistic magnetohydrodynamics (GRMHD). The assumption of meridional self-similarity is adopted for the construction of semi-analytical solutions of the GRMHD equations describing outflows close to the polar axis. In addition, it is assumed that relativistic effects related to the rotation of the black hole and the plasma are negligible compared to the gravitational and other energetic terms. The constructed model allows us to extend previous MHD studies for coronal winds from young stars to spine jets from Active Galactic Nuclei surrounded by disk-driven outflows. The outflows are thermally driven and magnetically or thermally collimated. The collimation depends critically on an energetic integral measuring the efficiency of the magnetic rotator, similarly to the non relativistic case. It is also shown that relativistic effects affect quantitatively the depth of the gravitational well and the coronal temperature distribution in the launching region of the outflow. Similarly to previous analytical and numerical studies, relativistic effects tend to increase the efficiency of the thermal driving but reduce the effect of magnetic self-collimation.
[42]  oai:arXiv.org:astro-ph/0509064  [pdf] - 75646
Magnetic collimation of the relativistic jet in M87
Comments: 4 pages, 2 figures, accepted by A&A Letters
Submitted: 2005-09-03
We apply a two-zone MHD model to the jet of M87. The model consists of an inner relativistic outflow, which is surrounded by a non-relativistic outer disk-wind. The outer disk-wind collimates very well through magnetic self-collimation and confines the inner relativistic jet into a narrow region around the rotation axis. Further, we show by example, that such models reproduce very accurately the observed opening angle of the M87 jet over a large range from the kiloparsec scale down to the sub-parsec scale.
[43]  oai:arXiv.org:astro-ph/0503694  [pdf] - 72076
A solar active region loop compared with a 2D MHD model
Comments: A&A in press, 10 pages, 6 figures
Submitted: 2005-03-31
We analyzed a coronal loop observed with the Normal Incidence Spectrometer (NIS), which is part of the Coronal Diagnostic Spectrometer (CDS) on board the Solar and Heliospheric Observatory (SOHO). The measured Doppler shifts and proper motions along the selected loop strongly indicate unidirectional flows. Analysing the Emission Measure Curves of the observed spectral lines, we estimated that the temperature along the loop was about 380000 K. We adapted a solution of the ideal MHD steady equations to our set of measurements. The derived energy balance along the loop, as well as the advantages/disadvantages of this MHD model for understanding the characteristics of solar coronal loops are discussed.
[44]  oai:arXiv.org:astro-ph/0407100  [pdf] - 65942
Relativistic Parker winds with variable effective polytropic index
Comments: Accepted for publication in A&A, 10 page, 11 figures
Submitted: 2004-07-06
Spherically symmetric hydrodynamical outflows accelerated thermally in the vicinity of a compact object are studied by generalizing an equation of state with a variable effective polytropic index, appropriate to describe relativistic temperatures close to the central object and nonrelativistic ones further away. Relativistic effects introduced by the Schwarzschild metric and the presence of relativistic temperatures in the corona are compared with previous results for a constant effective polytropic index and also with results of the classical wind theory. By a parametric study of the polytropic index and the location of the sonic transition it is found that space time curvature and relativistic temperatures tend to increase the efficiency of thermal driving in accelerating the outflow. Thus conversely to the classical Parker wind, the outflow is accelerated even for polytropic indices higher than 3/2. The results of this simple but fully relativistic extension of the polytropic equation of state may be useful in simulations of outflows from hot coronae in black hole magnetospheres.
[45]  oai:arXiv.org:astro-ph/0406311  [pdf] - 65468
Nonradial and nonpolytropic astrophysical outflows VI. Overpressured winds and jets
Comments: received 2 December 2003 / accepted 8 April 2004
Submitted: 2004-06-14
By means of a nonlinear separation of the variables in the governing full set of the magnetohydrodynamic (MHD) equations for axisymmetric plasmas we analyse an exact model for magnetized and rotating outflows which are hotter and overpressured at their axis. These outflows start subsonically and subAlfv\'enically from the central gravitating source and its surrounding accretion disk. Subsequently, they accelerate thermally and magnetocentrifugally and thus cross the appropriate MHD critical points, reaching high values of the Alfv\'en Mach number. Three types of solutions are found : (a) collimated jet-type outflows from efficient magnetic rotators with the flow confined by the magnetic hoop stress; (b) radially expanding wind-type outflows analogous to the solar wind, from inefficient magnetic rotators or strongly overpressured sources; (c) terminated solutions with increasing amplitude of oscillations in the width of the beam. In contrast to previously studied underpressured outflows, the transition from collimated jets to uncollimated winds is not continuous in the appropriate parametric space with a gap where no stationary solution is found. Superfast at infinity solutions are filtered by three critical surfaces corresponding to the three known limiting characteristics or separatrices of MHD wind theory. Collimated and terminated solutions cross the slow, Alfv\'en and fast magneto-acoustic critical points. Radially expanding solutions cross the slow and Alfv\'en critical points while the last boundary condition is imposed by requiring that the pressure vanishes at infinity.
[46]  oai:arXiv.org:astro-ph/0402637  [pdf] - 63151
Compressible 2D MHD modelling of prominence dips
Comments: 16 pages in A&A referee format
Submitted: 2004-02-26
An analytical MHD model of a normal-polarity prominence with compressible flow is presented. The exact solution is constructed via a systematic nonlinear separation of variables method used to calculate several classes of MHD equilibria in Cartesian geometry and uniform gravity. Although the model is 2D, a third magnetic/velocity vector field component is included and the highly sheared fields observed in prominences are reproduced. A description is given of the balance of gas pressure gradient with gravity and the Lorentz or inertial forces acting along and across the prominence. It is found that the flow does not significantly influence the heating profile. The analyzed model has dimensions, plasma density, temperature and velocity profiles which agree with those in the observations literature.
[47]  oai:arXiv.org:astro-ph/0303373  [pdf] - 55612
2D MHD modelling of compressible and heated coronal loops obtained via nonlinear separation of variables and compared to TRACE and SoHO observations
Comments: 31 pages, 11 figures, submitted to A&A
Submitted: 2003-03-17
An analytical MHD model of coronal loops with compressible flows and including heating is compared to observational data. The model is constructed via a systematic nonlinear separation of the variables method used to calculate several classes of exact MHD equilibria in Cartesian geometry and uniform gravity. By choosing a particularly versatile solution class with a large parameter space we are able to calculate models whose loop length, shape, plasma density, temperature and velocity profiles are fitted to loops observed with TRACE, SoHO/CDS and SoHO/SUMER. Synthetic emission profiles are also calculated and fitted to the observed emission patterns. An analytical discussion is given of the two-dimenional balance of the Lorentz force and the gas pressure gradient, gravity and inertial forces acting along and across the loop. These models are the first to include a fully consistent description of the magnetic field, 2D geometry, plasma density and temperature, flow velocity and thermodynamics of loops. The consistently calculated heating profiles which are largely dominated by radiative losses are influenced by the flow and are asymmetrical being concentrated at the upflow footpoint.
[48]  oai:arXiv.org:astro-ph/0205203  [pdf] - 49277
Nonradial and nonpolytropic astrophysical outflows. V. Acceleration and collimation of self-similar winds
Comments: 18 pages, 13 figures, accepted for publication in Astronomy and Astrophysics
Submitted: 2002-05-14
An exact model for magnetized and rotating outflows, underpressured at their axis, is analysed by means of a nonlinear separation of the variables in the two-dimensional governing magnetohydrodynamic (MHD) equations for axisymmetric plasmas. The outflow starts subsonically and subAlfv\'enically from the central gravitating source and its surrounding accretion disk and after crossing the MHD critical points, high values of the Alfv\'en Mach number may be reached. Three broad types of solutions are found: (a) collimated jet-type outflows from efficient magnetic rotators where the outflow is confined by the magnetic hoop stress; (b) collimated outflows from inefficient magnetic rotators where the outflow is cylindrically confined by thermal pressure gradients; and (c) radially expanding wind-type outflows analogous to the solar wind. In most of the cases examined cylindrically collimated (jet-type) outflows are naturally emerging with thermal and magnetic effects competing in the acceleration and the confinement of the jet. The interplay of all MHD volumetric forces in accelerating and confining the jet is displayed along all its length and for several parameters. The solutions may be used for a physical understanding of astrophysical outflows, such as those associated with young stellar objects, planetary nebulae, extragalactic jets, etc.
[49]  oai:arXiv.org:astro-ph/0111537  [pdf] - 46303
Systematic Construction of Exact 2-D MHD Equilibria with Steady, Compressible Flow in Cartesian Geometry and Uniform Gravity
Comments: 12 pages, 12 Postscript figures, accepted by A&A 16th November 2001, uses aa.cls
Submitted: 2001-11-28
We present a systematic method for constructing two-dimensional magnetohydrodynamic equilibria with compressible flow in Cartesian geometry. This systematic method has already been developed in spherical geometry and applied in modelling solar and stellar winds and outflows (Vlahakis & Tsinganos,1998) but is derived here in Cartesian geometry in the context of the solar atmosphere for the first time. Using the method we find several new classes of solutions, some of which generalise known solutions, including the Kippenhahn & Schl\"uter (1957) and Hood & Anzer (1990) solar prominence models and the Tsinganos, Surlantzis & Priest (1993) coronal loop model with flow, and some of which are completely new. Having developed the method in full and summarised the several classes of solutions, we explore in a some detail one of the classes to illustrate the general construction method. From one of the new classes of solutions we calculate two loop-like solutions, one of which is the first exact two-dimensional magnetohydrodynamic equilibrium with trans-Alfv\'enic flow.
[50]  oai:arXiv.org:astro-ph/0108509  [pdf] - 44485
Jet Formation and Collimation in AGN and microQuasars
Comments: 32 pages, 8 figures, to be published in Springer Verlag Lecture Notes in Physics "Relativistic Flows in Astrophysics" Georganopoulos et al. (Eds.), Mykonos conference, October 2000
Submitted: 2001-08-31
We briefly review our current understanding for the formation, acceleration and collimation of winds to jets associated with compact astrophysical objects such as AGN and microQuasars.
[51]  oai:arXiv.org:astro-ph/0103289  [pdf] - 41506
An analytical MHD wind model with latitudinal dependences obtained using separation of the variables
Comments: 10 pages, 8 figures, Astron. & Astroph. accepted for publication (Febr. 2001)
Submitted: 2001-03-19
A new class of analytical 2-D solutions of the full set of the steady magnetohydrodynamic (MHD) equations, describing an axisymmetric helicoidal magnetized outflow originating from a rotating central object, is presented. The solutions are systematically obtained via a nonlinear separation of the variables in the momentum equation. The analysis yields three parameters which measure the anisotropy in the latitudinal distribution of various flow quantities. Topologically, the wind speed is controlled by an X-type critical point that acts to filter out a single wind-type branch and the Alfven singularity. The solutions can be regarded as an extension outside the equatorial plane of the Weber & Davis (1967) model of magnetized winds but with a variable polytropic index.
[52]  oai:arXiv.org:astro-ph/0102250  [pdf] - 40961
Magnetically Collimated Jets with High Mass Flux
Comments: 7 pages, 7 figures, MNRAS, in press
Submitted: 2001-02-14
Recent numerical simulations and analytical models of magnetically collimated plasma outflows from a uniformly rotating central gravitating object and/or a Keplerian accretion disk have shown that relatively low mass and magnetic fluxes reside in the produced jet. Observations however indicate that in some cases, as in jets of YSO's, the collimated outflow carries higher fluxes than these simulations predict. A solution to this problem is proposed here by assuming that jets with high mass flux originate in a central source which produces a noncollimated outflow provided that this source is surrounded by a rapidly rotating accretion disk. The relatively faster rotating disk produces a collimated wind which then forces all the enclosed outflow from the central source to be collimated too. This conclusion is confirmed by self-consistent numerical solutions of the full set of the MHD equations.
[53]  oai:arXiv.org:astro-ph/0006011  [pdf] - 36391
Magnetic collimation of the solar and stellar winds
Comments: 15 pages, accepted for publication in Astronomy and Astrophysics
Submitted: 2000-06-01
We resolve the paradox that although magnetic collimation of an isotropic solar wind results in an enhancement of its proton flux along the polar directions, several observations indicate a wind proton flux peaked at the equator. To that goal, we solve the full set of the time-dependent MHD equations describing the axisymmetric outflow of plasma from the magnetized and rotating Sun, either in its present form of the solar wind, or, in its earlier form of a protosolar wind. Special attention is directed towards the collimation properties of the solar outflow at large heliocentric distances. For the present day solar wind it is found that the poloidal streamlines and fieldlines are only slightly focused toward the solar poles. However, even such a modest compression of the flow by the azimuthal magnetic field would lead to an increase of the mass flux at the polar axis by about 20% at 1 AU, relatively to its value at the equator, for an initially isotropic at the base wind, contrary to older and recent (Prognoz, Ulysses, SOHO) observations. For the anisotropic in heliolatitude wind with parameters at the base inferred from in situ observations by ULYSSES/SWOOPS and SOHO/CDS the effect of collimation is almost totally compensated by the initial velocity and density anisotropy of the wind. This effect should be taken into account in the interpretation of the recent SOHO observations by the SWAN instrument. Similar simulations have been performed for a five- and ten-fold increase of the solar angular velocity corresponding presumably to the wind of an earlier phase of our Sun. For such conditions it is found that for initially radial streamlines, the azimuthal magnetic field created by the fast rotation focus them toward the rotation axis and forms a tightly collimated jet.
[54]  oai:arXiv.org:astro-ph/0005582  [pdf] - 1232484
A disk-wind model with correct crossing of all MHD critical surfaces
Comments: 13 pages, MNRAS accepted for publication
Submitted: 2000-05-30
The classical Blandford & Payne (1982) model for the magnetocentrifugal acceleration and collimation of a disk-wind is revisited and refined. In the original model, the gas is cold and the solution is everywhere subfast magnetosonic. In the present model the plasma has a finite temperature and the self-consistent solution of the MHD equations starts with a subslow magnetosonic speed which subsequently crosses all critical points, at the slow magnetosonic, Alfven and fast magnetosonic separatrix surfaces. The superfast magnetosonic solution thus satisfies MHD causality. Downstream of the fast magnetosonic critical point the poloidal streamlines overfocus towards the axis and the solution is terminated. The validity of the model to disk winds associated with young stellar objects is briefly discussed. ~
[55]  oai:arXiv.org:astro-ph/9906105  [pdf] - 106826
Nonradial and nonpolytropic astrophysical outflows IV. Magnetic or thermal collimation of winds into jets?
Comments: 24 pages, 9 figures, accepted for publication in Astronomy and Astrophysics
Submitted: 1999-06-07
An axisymmetric MHD model is examined analytically to illustrate some key aspects of the physics of hot and magnetized outflows which originate in the near environment of a central gravitating body. By analyzing the asymptotical behaviour of the outflows it is found that they attain a variety of shapes such as conical, paraboloidal or cylindrical. However, non cylindrical asymptotics can be achieved only when the magnetic pinching is negligible and the outflow is overpressured on its symmetry axis. In cylindrical jet-type asymptotics, the outflowing plasma reaches an equilibrium wherein it is confined by magnetic forces or gas pressure gradients, while it is supported by centrifugal forces or gas pressure gradients. In which of the two regimes (with thermal or magnetic confinement) a jet can be found depends on the efficiency of the central magnetic rotator. The radius and terminal speed of the jet are analytically given in terms of the variation across the poloidal streamlines of the total energy. Large radius of the jet and efficient acceleration are best obtained when the external confinement is provided with comparable contributions by magnetic pinching and thermal pressure. In most cases, collimated streamlines undergo oscillations with various wavelengths, as also found by other analytical models. Scenarios for the evolution of outflows into winds and jets in the different confinement regimes are shortly outlined.
[56]  oai:arXiv.org:astro-ph/9902094  [pdf] - 105113
A class of exact MHD models for astrophysical jets
Comments: 16 pages, 15 figures. Accepted for publication in MNRAS
Submitted: 1999-02-05
This paper examines a new class of exact and self-consistent MHD solutions which describe steady and axisymmetric hydromagnetic outflows from the atmosphere of a magnetized and rotating central object with possibly an orbiting accretion disk. The plasma is driven against gravity by a thermal pressure gradient, as well as by magnetic rotator and radiative forces. At the Alfvenic and fast critical points the appropriate criticality conditions are applied. The outflow starts almost radially but after the Alfven transition and before the fast critical surface is encountered the magnetic pinching force bends the poloidal streamlines into a cylindrical jet-type shape. The terminal speed, Alfven number, cross-sectional area of the jet, as well as its final pressure and density obtain uniform values at large distances from the source. The goal of the study is to give an analytical discussion of the two-dimensional interplay of the thermal pressure gradient, gravitational, Lorentz and inertial forces in accelerating and collimating an MHD flow. A parametric study of the model is also given, as well as a brief sketch of its applicability to a self-consistent modelling of collimated outflows from various astrophysical objects. {The analysed model succeeds to give for the first time an exact and self-consistent MHD solution for jet-type outflows extending from the stellar surface to infinity where it can be superfast, in agreement with the MHD causality principle.
[57]  oai:arXiv.org:astro-ph/9901081  [pdf] - 104675
On the magnetic acceleration and collimation of astrophysical outflows
Comments: 15 pages, 13 figures. Accepted for publication, MNRAS
Submitted: 1999-01-08
The axisymmetric 3-D MHD outflow of a cold plasma from a magnetized and rotating astrophysical object is numerically simulated with the purpose of investigating the outflow's magnetocentrifugal acceleration and eventual collimation. Gravity and thermal pressure are neglected while a split-monopole is used to describe the initial magnetic field configuration. It is found that the stationary final state depends critically on a single parameter alpha expressing the ratio of the corotating speed at the Alfven distance to the initial flow speed along the initial monopole-like magnetic fieldlines. Several angular velocity laws have been used for relativistic and nonrelativistic outflows. The acceleration of the flow is most effective at the equatorial plane and the terminal flow speed depends linearly on alpha. Significant flow collimation is found in nonrelativistic efficient magnetic rotators corresponding to relatively larger than 1 values of alpha while very weak collimation occurs in inefficient magnetic rotators with values of alpha smaller than about 1. Part of the flow around the rotation and magnetic axis is cylindrically collimated while the remaining part obtains radial asymptotics. The transverse radius of the jet is inversely proportional to alpha while the density in the jet grows linearly with alpha. For alpha greater than about 5 the magnitude of the flow in the jet remains below the fast MHD wave speed everywhere. In relativistic outflows, no collimation is found in the supersonic region for parameters typical for radio pulsars. All above results verify the main conclusions of general theoretical studies on the magnetic acceleration and collimation of outflows from magnetic rotators and extend previous numerical simulations to large stellar distances.
[58]  oai:arXiv.org:astro-ph/9812354  [pdf] - 104461
Systematic construction of exact MHD models for astrophysical winds and jets
Comments: 13 pages, 11 figures
Submitted: 1998-12-18
By a systematic method we construct general classes of exact and selfconsistent axisymmetric MHD solutions describing flows which originate at the near environment of a central gravitating astrophysical object. The unifying scheme contains two large groups of exact MHD outflow models, (I) meridionally self-similar ones with spherical critical surfaces and (II) radially self-similar models with conical critical surfaces. The classification includes known polytropic models, such as the classical Park er model of a stellar wind and the Blandford and Payne (1982) model of a disk-wind; it also contains nonpolytropic models, such as those of winds/jets in Sauty and Tsinganos (1994), Lima et al (1996) and Trussoni et al (1997). Besides the unification of these known cases under a common scheme, several new classes emerge and some are briefly analysed; they could be explored for a further understanding of the physical properties of MHD outflows from various magnetized and rotating astrophysical objects in stellar or galactic systems.