Traditionally, the solar magnetic field has been considered to have a negligible effect in the outer regions of the heliosphere. Recent works have shown that the solar magnetic field may play a crucial role in collimating the plasma in the heliosheath. Interstellar Boundary Explorer (IBEX) observations of the heliotail indicated a latitudinal structure varying with energy in the energetic neutral atom (ENA) fluxes. At energies ~1 keV, the ENA fluxes show an enhancement at low latitudes and a deficit of ENAs near the poles. At energies >2.7 keV, ENA fluxes had a deficit within low latitudes, and lobes of higher ENA flux near the poles. This ENA structure was initially interpreted to be a result of the latitudinal profile of the solar wind during solar minimum. We extend the work of Kornbleuth et al. (2018) by using solar minimum-like conditions and the recently developed SHIELD model. The SHIELD model couples the magnetohydrodynamic (MHD) plasma solution with a kinetic description of neutral hydrogen. We show that while the latitudinal profile of the solar wind during solar minimum contributes to the lobes in ENA maps, the collimation by the solar magnetic field is important in creating and shaping the two high latitude lobes of enhanced ENA flux observed by IBEX. This is the first work to explore the effect of the changing solar magnetic field strength on ENA maps. Our findings suggest that IBEX is providing the first observational evidence of the collimation of the heliosheath plasma by the solar magnetic field.

Neutral hydrogen has been shown to greatly impact the plasma flow in the heliopshere and the location of the heliospheric boundaries. We present the results of the Solar-wind with Hydrogen Ion Exchange and Large-scale Dynamics (SHIELD) model, a new, self-consistent, kinetic-MHD model of the outer heliosphere within the Space Weather Modeling Framework. The charge-exchange mean free path is on order of the size of the heliosphere; therefore, the neutral atoms cannot be described as a fluid. The SHIELD model couples the MHD solution for a single plasma fluid to the kinetic solution from for neutral hydrogen atoms streaming through the system. The kinetic code is based on the Adaptive Mesh Particle Simulator (AMPS), a Monte Carlo method for solving the Boltzmann equation. The SHIELD model accurately predicts the increased filtration of interstellar neutrals into the heliosphere. In order to verify the correct implementation within the model, we compare the results of the SHIELD model to other, well-established kinetic-MHD models. The SHIELD model matches the neutral hydrogen solution of these studies as well as the shift in all heliospheric boundaries closer to the Sun in comparison the the multi-fluid treatment of the neutral hydrogen atoms. Overall the SHIELD model shows excellent agreement to these models and is a significant improvement to the fluid treatment of interstellar hydrogen.

A deep learning network, Long-Short Term Memory (LSTM) network, is used in this work to predict whether the maximum flare class an active region (AR) will produce in the next 24 hours is class $\Gamma$. We considered $\Gamma$ are $\ge M$, $\ge C$ and any flare class. The essence of using LSTM, which is a recurrent neural network, is its capability to capture temporal information of the data samples. The input features are time sequences of 20 magnetic parameters from SHARPs - Space-weather HMI Active Region Patches. We analyzed active regions from June 2010 to Dec 2018, using the Geostationary Operational Environmental Satellite (GOES) X-ray flare catalogs and label the data samples with identified ARs in the GOES X-ray flare catalogs. Our results (i) shows consistent skill scores with recently published results using LSTMs and better than the previous work using single time input (eg. DeFN) (ii) The skill scores from the model show essential differences when different years of data was chosen for training and testing.

Heliospheric plasmas require multi-scale and multi-physics considerations. On one hand, MHD codes are widely used for global simulations of the solar-terrestrial environments, but do not provide the most elaborate physical description of space plasmas. Hybrid codes, on the other hand, capture important physical processes, such as electric currents and effects of finite Larmor radius, but they can be used locally only, since the limitations in available computational resources do not allow for their use throughout a global computational domain. In the present work, we present a new coupled scheme which allows to switch blocks in the block-adaptive grids from fluid MHD to hybrid simulations, without modifying the self-consistent computation of the electromagnetic fields acting on fluids (in MHD simulation) or charged ion macroparticles (in hybrid simulation). In this way, the hybrid scheme can refine the description in specified regions of interest without compromising the efficiency of the global MHD code.

Simulation of plasmas in the electromagnetic fields requires to solve numerically a kinetic equation, describing the time evolution of the particle distribution function. Here, we propose a finite volume scheme based on the integral relation for the Poisson bracket to solve the most fundamental kinetic equation, namely, the Liouville equation. The proposed scheme conserves the number of particles, maintains the total-variation-diminishing (TVD) property, and provides high-quality numerical results. Some other types of kinetic equations may be also formulated in terms of the Poisson brackets and solved with the proposed method. Among them is the focused transport equation describing the acceleration and propagation of the Solar Energetic Particles (SEPs), which is of practical importance, since the high energy SEPs produce radiation hazards. The newly proposed scheme is demonstrated to be accurate and efficient, which makes it applicable to global simulation systems analysing the space weather. We also discuss a role of focused transport and the accuracy of the diffusive approximation, in application to the SEPs

The Rosetta Orbiter Spectrometer for Ion and Neutral Analysis (ROSINA) suite of instruments operated throughout the over two years of the Rosetta mission operations in the vicinity of comet 67P/Churyumov-Gerasimenko. It measured gas densities and composition throughout the comet's atmosphere, or coma. Here we present two-years' worth of measurements of the relative densities of the four major volatile species in the coma of the comet, H2O. CO2, CO and O2, by one of the ROSINA sub-systems called the Double Focusing Mass Spectrometer (DFMS). The absolute total gas densities were provided by the Comet Pressure Sensor (COPS), another ROSINA sub-system. DFMS is a very high mass resolution and high sensitivity mass spectrometer able to resolve at a tiny fraction of an atomic mass unit. We have analyzed the combined DFMS and COPS measurements using an inversion scheme based on spherical harmonics that solves for the distribution of potential surface activity of each species as the comet rotates, changing solar illumination, over short intervals and as the comet changes distance from the sun and orientation of its spin axis over long time intervals. We also use the surface boundary conditions derived from the inversion scheme to simulate the whole coma with our fully kinetic Direct Simulation Monte Carlo model and calculate the production rates of the four major species throughout the mission. We compare the derived production rates with revised remote sensing observations by the Visible and Infrared Thermal Imaging Spectrometer (VIRTIS) as well as with published observations from the Microwave Instrument for the Rosetta Orbiter (MIRO). Finally we use the variation of the surface production of the major species to calculate the total mass loss over the mission and, for different estimates of the dust/gas ratio, calculate the variation of surface loss over the nucleus.

We present several methods towards construction of precursors, which show great promise towards early predictions, of solar flare events in this paper. A data pre-processing pipeline is built to extract useful data from multiple sources, Geostationary Operational Environmental Satellites (GOES) and Solar Dynamics Observatory (SDO)/Helioseismic and Magnetic Imager (HMI), to prepare inputs for machine learning algorithms. Two classification models are presented: classification of flares from quiet times for active regions and classification of strong versus weak flare events. We adopt deep learning algorithms to capture both the spatial and temporal information from HMI magnetogram data. Effective feature extraction and feature selection with raw magnetogram data using deep learning and statistical algorithms enable us to train classification models to achieve almost as good performance as using active region parameters provided in HMI/Space-Weather HMI-Active Region Patch (SHARP) data files. Case studies show a significant increase in the prediction score around 20 hours before strong solar flare events.

The shape of the solar wind bubble within the interstellar medium, the so-called heliosphere, has been explored over six decades. As the Sun moves through the surrounding partially-ionized medium, neutral hydrogen atoms penetrate the heliosphere, and through charge-exchange with the supersonic solar wind, create a population of hot pick-up ions (PUIs). The Termination Shock (TS) crossing by Voyager 2 (V2) data demonstrated that the heliosheath (HS) (the region of shocked solar wind) pressure is dominated by suprathermal particles. Here we use a novel magnetohydrodynamic model that treats the freshly ionized PUIs as a separate fluid from the thermal component of the solar wind. Unlike previous models, the new model reproduces the properties of the PUIs and solar wind ions based on the New Horizon and V2 spacecraft observations. The PUIs charge exchange with the cold neutral H atoms of the ISM in the HS and are quickly depleted. The depletion of PUIs cools the heliosphere downstream of the TS, "deflating" it and leading to a narrower HS and a smaller and rounder shape, in agreement with energetic neutral atom observations by the Cassini spacecraft. The new model, with interstellar magnetic field orientation constrained by the IBEX ribbon, reproduces the magnetic field data outside the HP at Voyager 1(V1). We present the predictions for the magnetic field outside the HP at V2.

The authors of this report met on 28-30 March 2018 at the New Jersey Institute of Technology, Newark, New Jersey, for a 3-day workshop that brought together a group of data providers, expert modelers, and computer and data scientists, in the solar discipline. Their objective was to identify challenges in the path towards building an effective framework to achieve transformative advances in the understanding and forecasting of the Sun-Earth system from the upper convection zone of the Sun to the Earth's magnetosphere. The workshop aimed to develop a research roadmap that targets the scientific challenge of coupling observations and modeling with emerging data-science research to extract knowledge from the large volumes of data (observed and simulated) while stimulating computer science with new research applications. The desire among the attendees was to promote future trans-disciplinary collaborations and identify areas of convergence across disciplines. The workshop combined a set of plenary sessions featuring invited introductory talks and workshop progress reports, interleaved with a set of breakout sessions focused on specific topics of interest. Each breakout group generated short documents, listing the challenges identified during their discussions in addition to possible ways of attacking them collectively. These documents were combined into this report-wherein a list of prioritized activities have been collated, shared and endorsed.

We study roles of the thermosphere and exosphere on the Martian ionospheric structure and ion escape rates in the process of the solar wind-Mars interaction. We employ a four-species multifluid MHD (MF-MHD) model to simulate the Martian ionosphere and magnetosphere. The $cold$ thermosphere background is taken from the Mars Global Ionosphere Thermosphere Model (M-GITM) and the $hot$ oxygen exosphere is adopted from the Mars exosphere Monte Carlo model - Adaptive Mesh Particle Simulator (AMPS). A total of four cases with the combination of 1D (globally averaged) and 3D thermospheres and exospheres are studied. The ion escape rates calculated by adopting 1D and 3D atmospheres are similar; however, the latter are required to adequately reproduce MAVEN ionospheric observations. In addition, our simulations show that the 3D hot oxygen corona plays an important role in preventing planetary molecular ions (O$_2^+$ and CO$_2^+$) escaping from Mars, mainly resulting from the mass loading of the high-altitude exospheric O$^+$ ions. The $cold$ thermospheric oxygen atom, however, is demonstrated to be the primary neutral source for O$^+$ ion escape during the relatively weak solar cycle 24.

In this Letter, we make use of sophisticated 3D numerical simulations to assess the extent of atmospheric ion and photochemical losses from Mars over time. We demonstrate that the atmospheric ion escape rates were significantly higher (by more than two orders of magnitude) in the past at $\sim 4$ Ga compared to the present-day value owing to the stronger solar wind and higher ultraviolet fluxes from the young Sun. We found that the photochemical loss of atomic hot oxygen dominates over the total ion loss at the current epoch whilst the atmospheric ion loss is likely much more important at ancient times. We briefly discuss the ensuing implications of high atmospheric ion escape rates in the context of ancient Mars, and exoplanets with similar atmospheric compositions around young solar-type stars and M-dwarfs.

Magnetohydrodynamics simulations have been carried out in studying the solar wind and cometary plasma interactions for decades. Various plasma boundaries have been simulated and compared well with observations for comet 1P/Halley. The Rosetta mission, which studies comet 67P/Churyumov-Gerasimenko, challenges our understanding of the solar wind and comet interactions. The Rosetta Plasma Consortium observed regions of very weak magnetic field outside the predicted diamagnetic cavity. In this paper, we simulate the inner coma with the Hall magnetohydrodynamics equations and show that the Hall effect is important in the inner coma environment. The magnetic field topology becomes complex and magnetic reconnection occurs on the dayside when the Hall effect is taken into account. The magnetic reconnection on the dayside can generate weak magnetic filed regions outside the global diamagnetic cavity, which may explain the Rosetta Plasma Consortium observations. We conclude that the substantial change in the inner coma environment is due to the fact that the ion inertial length (or gyro radius) is not much smaller than the size of the diamagnetic cavity.

Based on the difference between the orientation of the interstellar $B_{ISM}$ and the solar magnetic fields, there was an expectation that the magnetic field direction would rotate dramatically across the heliopause (HP). However, the Voyager 1 spacecraft measured very little rotation across the HP. Previously we showed that the $B_{ISM}$ twists as it approaches the HP and acquires a strong T component (East-West). Here we establish that reconnection in the eastern flank of the heliosphere is responsible for the twist. On the eastern flank the solar magnetic field has twisted into the positive N direction and reconnects with the Southward pointing component of the $B_{ISM}$. Reconnection drives a rotational discontinuity (RD) that twists the $B_{ISM}$ into the -T direction and propagates upstream in the interstellar medium towards the nose. The consequence is that the N component of $B_{ISM}$ is reduced in a finite width band upstream of the HP. Voyager 1 currently measures angles ($\delta=sin^{-1}(B_{N}/B)$) close to solar values. We present MHD simulations to support this scenario, suppressing reconnection in the nose region while allowing it in the flanks, consistent with recent ideas about reconnection suppression from diamagnetic drifts. The jump in plasma $\beta$ (the plasma to magnetic pressure) across the nose of HP is much greater than in the flanks because the heliosheath $\beta$ is greater there than in the flanks. Large-scale reconnection is therefore suppressed in the nose but not at the flanks. Simulation data suggest that $B_{ISM}$ will return to its pristine value $10-15~AU$ past the HP.

We present a first-principles-based coronal mass ejection (CME) model suitable for both scientific and operational purposes by combining a global magnetohydrodynamics (MHD) solar wind model with a flux rope-driven CME model. Realistic CME events are simulated self-consistently with high fidelity and forecasting capability by constraining initial flux rope parameters with observational data from GONG, SOHO/LASCO, and STEREO/COR. We automate this process so that minimum manual intervention is required in specifying the CME initial state. With the newly developed data-driven Eruptive Event Generator Gibson-Low (EEGGL), we present a method to derive Gibson-Low (GL) flux rope parameters through a handful of observational quantities so that the modeled CMEs can propagate with the desired CME speeds near the Sun. A test result with CMEs launched with different Carrington rotation magnetograms are shown. Our study shows a promising result for using the first-principles-based MHD global model as a forecasting tool, which is capable of predicting the CME direction of propagation, arrival time, and ICME magnetic field at 1 AU (see companion paper by Jin et al. 2016b).

We perform and analyze results of a global magnetohydrodyanmic (MHD) simulation of the fast coronal mass ejection (CME) that occurred on 2011 March 7. The simulation is made using the newly developed Alfv\'en Wave Solar Model (AWSoM), which describes the background solar wind starting from the upper chromosphere and extends to 24 R$_{\odot}$. Coupling AWSoM to an inner heliosphere (IH) model with the Space Weather Modeling Framework (SWMF) extends the total domain beyond the orbit of Earth. Physical processes included in the model are multi-species thermodynamics, electron heat conduction (both collisional and collisionless formulations), optically thin radiative cooling, and Alfv\'en-wave turbulence that accelerates and heats the solar wind. The Alfv\'en-wave description is physically self-consistent, including non-Wentzel-Kramers-Brillouin (WKB) reflection and physics-based apportioning of turbulent dissipative heating to both electrons and protons. Within this model, we initiate the CME by using the Gibson-Low (GL) analytical flux rope model and follow its evolution for days, in which time it propagates beyond STEREO A. A detailed comparison study is performed using remote as well as \textit{in situ} observations. Although the flux rope structure is not compared directly due to lack of relevant ejecta observation at 1 AU in this event, our results show that the new model can reproduce many of the observed features near the Sun (e.g., CME-driven extreme ultraviolet (EUV) waves, deflection of the flux rope from the coronal hole, "double-front" in the white light images) and in the heliosphere (e.g., shock propagation direction, shock properties at STEREO A).

Aims: We develop a method for estimating the properties of stellar winds for low-mass main-sequence stars between masses of 0.4 and 1.1 solar masses at a range of distances from the star. Methods: We use 1D thermal pressure driven hydrodynamic wind models run using the Versatile Advection Code. Using in situ measurements of the solar wind, we produce models for the slow and fast components of the solar wind. We consider two radically different methods for scaling the base temperature of the wind to other stars: in Model A, we assume that wind temperatures are fundamentally linked to coronal temperatures, and in Model B, we assume that the sound speed at the base of the wind is a fixed fraction of the escape velocity. In Paper II of this series, we use observationally constrained rotational evolution models to derive wind mass loss rates. Results: Our model for the solar wind provides an excellent description of the real solar wind far from the solar surface, but is unrealistic within the solar corona. We run a grid of 1200 wind models to derive relations for the wind properties as a function of stellar mass, radius, and wind temperature. Using these results, we explore how wind properties depend on stellar mass and rotation. Conclusions: Based on our two assumptions about the scaling of the wind temperature, we argue that there is still significant uncertainty in how these properties should be determined. Resolution of this uncertainty will probably require both the application of solar wind physics to other stars and detailed observational constraints on the properties of stellar winds. In the final section of this paper, we give step by step instructions for how to apply our results to calculate the stellar wind conditions far from the stellar surface.

We present a new version of the Alfven Wave Solar Model (AWSoM), a global model from the upper chromosphere to the corona and the heliosphere. The coronal heating and solar wind acceleration are addressed with low-frequency Alfven wave turbulence. The injection of Alfven wave energy at the inner boundary is such that the Poynting flux is proportional to the magnetic field strength. The three-dimensional magnetic field topology is simulated using data from photospheric magnetic field measurements. This model does not impose open-closed magnetic field boundaries; those develop self-consistently. The physics includes: (1) The model employs three different temperatures, namely the isotropic electron temperature and the parallel and perpendicular ion temperatures. The firehose, mirror, and ion-cyclotron instabilities due to the developing ion temperature anisotropy are accounted for. (2) The Alfven waves are partially reflected by the Alfven speed gradient and the vorticity along the field lines. The resulting counter-propagating waves are responsible for the nonlinear turbulent cascade. The balanced turbulence due to uncorrelated waves near the apex of the closed field lines and the resulting elevated temperatures are addressed. (3) To apportion the wave dissipation to the three temperatures, we employ the results of the theories of linear wave damping and nonlinear stochastic heating. (4) We have incorporated the collisional and collisionless electron heat conduction. We compare the simulated multi-wavelength EUV images of CR2107 with the observations from STEREO/EUVI and SDO/AIA instruments. We demonstrate that the reflection due to strong magnetic fields in proximity of active regions intensifies the dissipation and observable emission sufficiently.

After the termination shock (TS) crossing, the Voyager 2 spacecraft has been observing strong variations of the magnetic field and solar wind parameters in the heliosheath. Anomalous cosmic rays, electrons, and galactic cosmic rays present strong intensity fluctuations. Several works suggested that the fluctuations might be attributed to spatial variations within the heliosheath. Additionally, the variability of the solar wind in this region is caused by different temporal events that occur near the Sun and propagate to the outer heliosphere. To understand the spatial and temporal effects in the heliosheath, it is important to study these effects separately. In this work we explore the role of shocks as one type of temporal effects in the dynamics of the heliosheath. Although currently plasma in the heliosheath is dominated by solar minima conditions, with increasing solar cycle shocks associated with transients will play an important role. We used a 3D MHD multi-fluid model of the interaction between the solar wind and the local interstellar medium to study the propagation of a pair of forward-reverse shocks in the supersonic solar wind, interaction with the TS, and propagation to the heliosheath. We found that in the supersonic solar wind the interaction region between the shocks expands, the shocks weaken and decelerate. The fluctuation amplitudes of the plasma parameters vary with heliocentric distance. The interaction of the pair of shocks with the TS creates a variety of new waves and discontinuities in the heliosheath, which produce a highly variable solar wind flow. The collision of the forward shock with the heliopause causes a reflection of fast magnetosonic waves inside the heliosheath.

Data from the Voyager probes and the Interstellar Boundary Explorer have revealed the importance of pick-up ions (PUIs) in understanding the character and behavior of the outer heliosphere, the region of interaction between the solar wind and the interstellar medium. In the outer heliosphere PUIs carry a large fraction of the thermal pressure, which effects the nature of the termination shock, and they are a dominate component of pressure in the heliosheath. This paper describes the development of a new multi-ion, multi-fluid 3-D magnetohydrodynamic model of the outer heliosphere. This model has the added capability of tracking the individual fluid properties of multiple ion populations. For this initial study two ion populations are modeled: the thermal solar wind ions and PUIs produced in the supersonic solar wind. The model also includes 4 neutral fluids that interact through charge-exchange with the ion fluids. The new multi-ion simulation reproduces the significant heating of PUIs at the termination shock, as inferred from Voyager observations, and provides properties of PUIs in the 3-D heliosheath. The thinning of the heliosheath due to the loss of thermal energy in the heliosheath from PUI and neutral interaction is also quantified. In future work the multi-ion, multi-fluid model will be used to simulate energetic neutral atom (ENA) maps for comparison with the Interstellar Boundary Explorer, particularly at PUI energies of less than 1 keV.

We present the latest improvements in the Center for Radiative Shock Hydrodynamics (CRASH) code, a parallel block-adaptive-mesh Eulerian code for simulating high-energy-density plasmas. The implementation can solve for radiation models with either a gray or a multigroup method in the flux-limited-diffusion approximation. The electrons and ions are allowed to be out of temperature equilibrium and flux-limited electron thermal heat conduction is included. We have recently implemented a CRASH laser package with 3-D ray tracing, resulting in improved energy deposition evaluation. New, more accurate opacity models are available which significantly improve radiation transport in materials like xenon. In addition, the HYPRE preconditioner has been added to improve the radiation implicit solver. With this updated version of the CRASH code we study radiative shock tube problems. In our set-up, a 1 ns, 3.8 kJ laser pulse irradiates a 20 micron beryllium disk, driving a shock into a xenon-filled plastic tube. The electrons emit radiation behind the shock. This radiation from the shocked xenon preheats the unshocked xenon. Photons traveling ahead of the shock will also interact with the plastic tube, heat it, and in turn this can drive another shock off the wall into the xenon. We are now able to simulate the long term evolution of radiative shocks.

We use the recently developed Center for Radiative Shock Hydrodynamics (CRASH) code to numerically simulate laser-driven radiative shock experiments. These shocks are launched by an ablated beryllium disk and are driven down xenon-filled plastic tubes. The simulations are initialized by the two-dimensional version of the Lagrangian Hyades code which is used to evaluate the laser energy deposition during the first 1.1ns. The later times are calculated with the CRASH code. This code solves for the multi-material hydrodynamics with separate electron and ion temperatures on an Eulerian block-adaptive-mesh and includes a multi-group flux-limited radiation diffusion and electron thermal heat conduction. The goal of the present paper is to demonstrate the capability to simulate radiative shocks of essentially three-dimensional experimental configurations, such as circular and elliptical nozzles. We show that the compound shock structure of the primary and wall shock is captured and verify that the shock properties are consistent with order-of-magnitude estimates. The produced synthetic radiographs can be used for comparison with future nozzle experiments at high-energy-density laser facilities.

Potential magnetic field solutions can be obtained based on the synoptic magnetograms of the Sun. Traditionally, a spherical harmonics decomposition of the magnetogram is used to construct the current and divergence free magnetic field solution. This method works reasonably well when the order of spherical harmonics is limited to be small relative to the resolution of the magnetogram, although some artifacts, such as ringing, can arise around sharp features. When the number of spherical harmonics is increased, however, using the raw magnetogram data given on a grid that is uniform in the sine of the latitude coordinate can result in inaccurate and unreliable results, especially in the polar regions close to the Sun. We discuss here two approaches that can mitigate or completely avoid these problems: i) Remeshing the magnetogram onto a grid with uniform resolution in latitude, and limiting the highest order of the spherical harmonics to the anti-alias limit; ii) Using an iterative finite difference algorithm to solve for the potential field. The naive and the improved numerical solutions are compared for actual magnetograms, and the differences are found to be rather dramatic. We made our new Finite Difference Iterative Potential-field Solver (FDIPS) a publically available code, so that other researchers can also use it as an alternative to the spherical harmonics approach.

We present a new 3d self-consistent two-component (plasma and neutral hydrogen) model of the solar wind interaction with the local interstellar medium (LISM). This model (K-MHD) combines the MHD treatment of the solar wind and the ionized LISM component, with a kinetic model of neutral interstellar hydrogen (LISH). The local interstellar magnetic field (BLISM) intensity and orientation are chosen based on an early analysis of the heliosheath flows (Opher et al. 2009). The properties of the plasma and neutrals obtained using the (K-MHD) model are compared to previous multi-fluid (Opher et al. 2009) and kinetic models (Izmodenov et al. 2005). The new treatment of LISH revealed important changes in the heliospheric properties not captures by the multi-fluid model. These include a decrease in the heliocentric distance to the termination shock (TS), a thinner heliosheath and a reduced deflection angle ({\theta}) of the heliosheath flows. The asymmetry of the termination shock, however, seems to be unchanged by the kinetic aspect of the LISH.

All the current global models of the heliosphere are based on the assumption that the magnetic field in the heliosheath, in the region close to the heliopause is laminar. We argue that in that region the heliospheric magnetic field is not laminar but instead consists of magnetic bubbles. Recently, we proposed that the annihilation of the "sectored" magnetic field within the heliosheath as it is compressed on its approach to the heliopause produces the anomalous cosmic rays and also energetic electrons. As a product of the annihilation of the sectored magnetic field, densely-packed magnetic islands/bubbles are produced. These magnetic islands/bubbles will be convected with the ambient flows as the sector region is carried to higher latitudes filling the heliosheath. We further argue that the magnetic islands/bubbles will develop upstream within the heliosheath. As a result, the magnetic field in the heliosheath sector region will be disordered well upstream of the heliopause. We present a 3D MHD simulation with very high numerical resolution that captures the north-south boundaries of the sector region. We show that due to the high pressure of the interstellar magnetic field a north-south asymmetry develops such that the disordered sectored region fills a large portion of the northern part of the heliosphere with a smaller extension in the southern hemisphere. We suggest that this scenario is supported by the following changes that occur around 2008 and from 2009.16 onward: a) the sudden decrease in the intensity of low energy electrons detected by Voyager 2; b) a sharp reduction in the intensity of fluctuations of the radial flow; and c) the dramatic differences in intensity trends between GCRs at V1 and 2. We argue that these observations are a consequence of V2 leaving the sector region of disordered field during these periods and crossing into a region of unipolar laminar field.

We describe the CRASH (Center for Radiative Shock Hydrodynamics) code, a block adaptive mesh code for multi-material radiation hydrodynamics. The implementation solves the radiation diffusion model with the gray or multigroup method and uses a flux limited diffusion approximation to recover the free-streaming limit. The electrons and ions are allowed to have different temperatures and we include a flux limited electron heat conduction. The radiation hydrodynamic equations are solved in the Eulerian frame by means of a conservative finite volume discretization in either one, two, or three-dimensional slab geometry or in two-dimensional cylindrical symmetry. An operator split method is used to solve these equations in three substeps: (1) solve the hydrodynamic equations with shock-capturing schemes, (2) a linear advection of the radiation in frequency-logarithm space, and (3) an implicit solve of the stiff radiation diffusion, heat conduction, and energy exchange. We present a suite of verification test problems to demonstrate the accuracy and performance of the algorithms. The CRASH code is an extension of the Block-Adaptive Tree Solarwind Roe Upwind Scheme (BATS-R-US) code with this new radiation transfer and heat conduction library and equation-of-state and multigroup opacity solvers. Both CRASH and BATS-R-US are part of the publicly available Space Weather Modeling Framework (SWMF).

We numerically model the coronal mass ejection (CME) event of October 28, 2003 that erupted from active region 10486 and propagated to Earth in less than 20 hours causing severe geomagnetic storms. The magnetohydrodynamic (MHD) model is formulated by first arriving at a steady state corona and solar wind employing synoptic magnetograms. We initiate two CMEs from the same active region, one approximately a day earlier that preconditions the solar wind for the much faster CME on the 28th. This second CME travels through the corona at a rate of over 2500 km s$^{-1}$ driving a strong forward shock. We clearly identify this shock in an image produced by the Large Angle Spectrometric Coronagraph (LASCO) C3, and reproduce the shock and its appearance in synthetic white light images from the simulation. We find excellent agreement with both the general morphology and the quantitative brightness of the model CME with LASCO observations. These results demonstrate that the CME shape is largely determined by its interaction with the ambient solar wind and may not be sensitive to the initiation process. We then show how the CME would appear as observed by wide-angle coronagraphs onboard the Solar Terrestrial Relations Observatory (STEREO) spacecraft. We find complex time evolution of the white-light images as a result of the way in which the density structures pass through the Thomson sphere. The simulation is performed with the Space Weather Modeling Framework (SWMF).

To model the interaction between the solar wind and the interstellar wind, magnetic fields must be included. Recently Opher et al. 2003 found that, by including the solar magnetic field in a 3D high resolution simulation using the University of Michigan BATS-R-US code, a jet-sheet structure forms beyond the solar wind Termination Shock. Here we present an even higher resolution three-dimensional case where the jet extends for $150AU$ beyond the Termination Shock. We discuss the formation of the jet due to a de Laval nozzle effect and it's su bsequent large period oscillation due to magnetohydrodynamic instabilities. To verify the source of the instability, we also perform a simplified two dimensional-geometry magnetohydrodynamic calculation of a plane fluid jet embedded in a neutral sheet with the profiles taken from our 3D simulation. We find remarkable agreement with the full three-dimensional evolution. We compare both simulations and the temporal evolution of the jet showing that the sinuous mode is the dominant mode that develops into a velocity-shear-instability with a growth rate of $5 \times 10^{-9} sec^{-1}=0.027 years^{-1}$. As a result, the outer edge of the heliosphere presents remarkable dynamics, such as turbulent flows caused by the motion of the jet. Further study, e.g., including neutrals and the tilt of the solar rotation from the magnetic axis, is required before we can definitively address how this outer boundary behaves. Already, however, we can say that the magnetic field effects are a major player in this region changing our previous notion of how the solar system ends.

There is currently a controversy as to whether Voyager 1 has already crossed the Termination Shock, the first boundary of the Heliosphere. The region between the Termination Shock and the Heliopause, the Helisheath, is one of the most unknown regions theoretically. In the Heliosheath magnetic effects are crucial, as the solar magnetic field is compressed at the Termination Shock by the slowing flow. Recently, our simulations showed that the Heliosheath presents remarkable dynamics, with turbulent flows and the presence of a jet flow at the current sheet that is unstable due to magnetohydrodynamic instabilities \cite{opher,opher1}. In this paper we review these recent results, and present an additional simulation with constant neutral atom background. In this case the jet is still present but with reduced intensity. Further study, e.g., including neutrals and the tilt of the solar rotation from the magnetic axis, is required before we can definitively address how the Heliosheath behaves. Already we can say that this region presents remarkable dynamics, with turbulent flows, indicating that the Heliosheath might be very different from what we previously thought.

Obtainable computational efficiency is evaluated when using an Adaptive Mesh Refinement (AMR) strategy in time accurate simulations governed by sets of conservation laws. For a variety of 1D, 2D, and 3D hydro- and magnetohydrodynamic simulations, AMR is used in combination with several shock-capturing, conservative discretization schemes. Solution accuracy and execution times are compared with static grid simulations at the corresponding high resolution and time spent on AMR overhead is reported. Our examples reach corresponding efficiencies of 5 to 20 in multidimensional calculations and only 1.5 -- 8 % overhead is observed. For AMR calculations of multi-dimensional magnetohydrodynamic problems, several strategies for controlling the $\nabla \cdot \BB =0$ constraint are examined. Three source term approaches suitable for cell-centered $\BB$ representations are shown to be effective. For 2D and 3D calculations where a transition to a more globally turbulent state takes place, it is advocated to use an approximate Riemann solver based discretization at the highest allowed level(s), in combination with the robust Total Variation Diminishing Lax-Friedrichs method on the coarser levels. This level-dependent use of the spatial discretization acts as a computationally efficient, hybrid scheme.

The Voyager spacecraft is now approaching the edge of the solar system. Near the boundary between the solar system and the interstellar medium we find that an unstable ``jet-sheet'' forms. The jet-sheet oscillates up and down due to a velocity shear instability. This result is due to a novel application of a state-of-art 3D Magnetohydrodynamic (MHD) code with a highly refined grid. We assume as a first approximation that the solar magnetic and rotation axes are aligned. The effect of a tilt of the magnetic axis with respect to the rotation axis remains to be seen. We include in the model self-consistently magnetic field effects in the interaction between the solar and interstellar winds. Previous studies of this interaction had poorer spatial resolution and did not include the solar magnetic field. This instability can affect the entry of energetic particles into the solar system and the intermixing of solar and interstellar material. The same effect found here is predicted for the interaction of rotating magnetized stars possessing supersonic winds and moving with respect to the interstellar medium, such as O stars.

We present numerical simulations, obtained with the Versatile Advection Code, of the oscillations of an inverse polarity prominence. The internal prominence equilibrium, the surrounding corona and the inert photosphere are well represented. Gravity and thermodynamics are not taken into account, but it is argued that these are not crucial. The oscillations can be understood in terms of a solid body moving through a plasma. The mass of this solid body is determined by the magnetic field topology, not by the prominence mass proper. The model also allows us to study the effect of the ambient coronal plasma on the motion of the prominence body. Horizontal oscillations are damped through the emission of slow waves while vertical oscillations are damped through the emission of fast waves.

A numerical study of the Kelvin-Helmholtz instability in compressible magnetohydrodynamics is presented. The three-dimensional simulations consider shear flow in a cylindrical jet configuration, embedded in a uniform magnetic field directed along the jet axis. The growth of linear perturbations at specified poloidal and axial mode numbers demonstrate intricate non-linear coupling effects. The physical mechanims leading to induced secondary Kelvin-Helmholtz instabilities at higher mode numbers are identified. The initially weak magnetic field becomes locally dominant in the non-linear dynamics before and during saturation. Thereby, it controls the jet deformation and eventual breakup. The results are obtained using the Versatile Advection Code [G. Toth, Astrophys. Lett. Comm. 34, 245 (1996)], a software package designed to solve general systems of conservation laws. An independent calculation of the same Kelvin-Helmholtz unstable jet configuration using a three-dimensional pseudo-spectral code gives important insights into the coupling and excitation events of the various linear mode numbers.

Small-scale explosive events or microflares occur throughout the chromospheric network of the Sun. They are seen as sudden bursts of highly Doppler shifted spectral lines of ions formed at temperatures in the range 2x10^4 - 5x10^5 K. They tend to occur near regions of cancelling photospheric magnetic fields and are thought to be directly associated with magnetic field reconnection. Recent observations have revealed that they have a bi-directional jet structure reminiscent of Petschek reconnection. In this paper compressible MHD simulations of the evolution of a current sheet to a steady Petschek, jet-like configuration are computed using the Versatile Advection Code. We obtain velocity profiles that can be compared with recent ultraviolet line profile observations. By choosing initial conditions representative of magnetic loops in the solar corona and chromosphere, it is possible to explain the fact that jets flowing outward into the corona are more extended and appear before jets flowing towards the chromosphere. This model can reproduce the high Doppler shifted components of the line profiles but the brightening at low velocities, near the centre of the bi-directional jet, cannot be explained by this simple MHD model.

We investigate the Kelvin-Helmholtz instability occuring at the interface of a shear flow configuration in 2D compressible magnetohydrodynamics (MHD). The linear growth and the subsequent non-linear saturation of the instability are studied numerically. We consider an initial magnetic field aligned with the shear flow, and analyze the differences between cases where the initial field is unidirectional everywhere (uniform case), and where the field changes sign at the interface (reversed case). We recover and extend known results for pure hydrodynamic and MHD cases with a discussion of the dependence of the non-linear saturation on the wavenumber, the sound Mach number, and the Alfvenic Mach number for the MHD case. A reversed field acts to destabilize the linear phase of the Kelvin-Helmholtz instability compared to the pure hydrodynamic case, while a uniform field suppresses its growth. In resistive MHD, reconnection events almost instantly accelerate the buildup of a global plasma circulation. They play an important role throughout the further non-linear evolution as well, since the initial current sheet gets amplified by the vortex flow and can become unstable to tearing instabilities forming magnetic islands. As a result, the saturation behaviour and the overall evolution of the density and the magnetic field is markedly different for the uniform versus the reversed field case.

Analytical studies and numerical simulations of time dependent axially symmetric flows onto black holes have shown that it is possible to produce stationary shock waves with a stable position both for ideal inviscid and for moderately viscous accretion disks. We perform several two dimensional numerical simulations of accretion flows in the equatorial plane to study shock stability against non-axisymmetric azimuthal perturbations. We find a peculiar new result. A very small perturbation seems to produce an instability as it crosses the shock, but after some small oscillations, the shock wave suddenly transforms into an asymmetric closed pattern, and it stabilizes with a finite radial extent, despite the inflow and outflow boundary conditions are perfectly symmetric. The main characteristics of the final flow are: 1) The deformed shock rotates steadily without any damping. It is a permanent feature and the thermal energy content and the emitted energy vary periodically with time. 2) This behavior is also stable against further perturbations. 3) The average shock is still very strong and well defined, and its average radial distance is somewhat larger than that of the original axially symmetric circular shock. 4) Shocks obtained with larger angular momentum exhibit more frequencies and beating phenomena. 5) The oscillations occur in a wide range of parameters, so this new effect may have relevant observational consequences, like (quasi) periodic oscillations, for the accretion of matter onto black holes. Typical time scales for the periods are 0.01 and 1000 seconds for black holes with 10 and 1 million solar mass, respectively.