We combine the Shark semi-analytic model of galaxy formation with the ProSpect software tool for spectral energy distribution (SED) generation to study the multi-wavelength emission of galaxies from the far-ultraviolet (FUV) to the far-infrared (FIR) at $0\le z\le 10$. We produce a physical model for the attenuation of galaxies across cosmic time by combining a local Universe empirical relation to compute the dust mass of galaxies from their gas metallicity and mass, attenuation curves derived from radiative transfer calculations of galaxies in the EAGLE hydrodynamic simulation suite, and the properties of Shark galaxies. We are able to produce a wide range of galaxies, from the $z=8$ star-forming galaxies with almost no extinction, $z=2$ submillimeter galaxies, down to the normal star-forming and red sequence galaxies at $z=0$. Quantitatively, we find that Shark reproduces the observed (i) the $z=0$ FUV-to-FIR, (ii) $0\le z\le 3$ rest-frame $K$-band, and (iii) $0\le z\le 10$ rest-frame FUV luminosity functions, (iv) $z\le 8$ UV slopes, (v) the FUV-to-FIR number counts (including the widely disputed 850$\mu$m), (vi) redshift distribution of bright $850\mu$m galaxies and (vii) the integrated cosmic SED from $z=0$ to $z=1$ to an unprecedented level. This is achieved without the need to invoke changes in the stellar initial mass function, dust-to-metal mass ratio, or metal enrichment timescales. Our model predicts star formation in galaxy disks to dominate in the FUV-to-optical, while bulges dominate at the NIR at all redshifts. The FIR sees a strong evolution in which disks dominate at $z\le 1$ and starbursts (triggered by both galaxy mergers and disk instabilities, in an even mix) dominate at higher redshifts, even out to $z=10$.

We present TreeFrog, a massively parallel halo merger tree builder that is capable comparing different halo catalogues and producing halo merger trees. The code is written in c++11, use the MPI and OpenMP API's for parallelisation, and includes python tools to read/manipulate the data products produced. The code correlates binding energy sorted particle ID lists between halo catalogues, determining optimal descendant/progenitor matches using multiple snapshots, a merit function that maximises the number of shared particles using pseudo-radial moments, and a scheme for correcting halo merger tree pathologies. Focusing on VELOCIraptor catalogues for this work, we demonstrate how searching multiple snapshots spanning a dynamical time significantly reduces the number of stranded halos, those lacking a descendant or a progenitor, critically correcting poorly resolved halos. We present a new merit function that improves the distinction between primary and secondary progenitors, reducing tree pathologies. We find FOF accretion rates and merger rates show similar mass ratio dependence. The model merger rates from Poole et al, (2017) agree with the measured net growth of halos through mergers.

We present VELOCIraptor, a massively parallel galaxy/(sub)halo finder that is also capable of robustly identifying tidally disrupted objects and separate stellar halos from galaxies. The code is written in c++11, use the MPI and OpenMP API's for parallelisation, and includes python tools to read/manipulate the data products produced. We demonstrate the power of the VELOCIraptor (sub)halo finder, showing how it can identify subhalos deep within the host that have negligible density contrasts to their parent halo. We find a subhalo mass-radial distance dependence: large subhalos with mass ratios of $\gtrsim10^{-2}$ are more common in the central regions that smaller subhalos, a result of dynamical friction and low tidal mass loss rates. This dependence is completely absent in (sub)halo finders in common use, which generally search for substructure in configuration space, yet is present in codes that track particles belonging to halos as they fall into other halos, such as HBT+. VELOCIraptor largely reproduces the dependence seen without tracking, finding a similar radial dependence to HBT+ in well resolved halos from our limited resolution fiducial simulation.

We present a new, open source, free semi-analytic model (SAM) of galaxy formation, Shark, designed to be highly flexible and modular, allowing easy exploration of different physical processes and ways of modelling them. We introduce the philosophy behind Shark and provide an overview of the physical processes included in the model. Shark is written in C++11 and has been parallelized with OpenMP. In the released version (v1.1), we implement several different models for gas cooling, active galactic nuclei, stellar and photo-ionisation feedback, and star formation (SF). We demonstrate the basic performance of Shark using the Planck15 cosmology SURFS simulations, by comparing against a large set of observations, including: the stellar mass function (SMF) and stellar-halo mass relation at z=0-4; the cosmic evolution of the star formation rate density (SFRD), stellar mass, atomic and molecular hydrogen; local gas scaling relations; and structural galaxy properties, finding excellent agreement. Significant improvements over previous SAMs are seen in the mass-size relation for disks/bulges, the gas-stellar mass and stellar mass-metallicity relations. To illustrate the power of Shark in exploring the systematic effects of the galaxy formation modelling, we quantify how the scatter of the SF main sequence and the gas scaling relations changes with the adopted SF law, and the effect of the starbursts H$_2$ depletion timescale on the SFRD and $\Omega_{\rm H_2}$. We compare Shark with other SAMs and the hydrodynamical simulation EAGLE, and find that SAMs have a much higher halo baryon fractions due to large amounts of intra-halo gas, which in the case of EAGLE is in the intergalactic medium.

We present ProFit, a new code for Bayesian two-dimensional photometric galaxy profile modelling. ProFit consists of a low-level C++ library (libprofit), accessible via a command-line interface and documented API, along with high-level R (ProFit) and Python (PyProFit) interfaces (available at github.com/ICRAR/ libprofit, github.com/ICRAR/ProFit, and github.com/ICRAR/pyprofit respectively). R ProFit is also available pre-built from CRAN, however this version will be slightly behind the latest GitHub version. libprofit offers fast and accurate two- dimensional integration for a useful number of profiles, including Sersic, Core-Sersic, broken-exponential, Ferrer, Moffat, empirical King, point-source and sky, with a simple mechanism for adding new profiles. We show detailed comparisons between libprofit and GALFIT. libprofit is both faster and more accurate than GALFIT at integrating the ubiquitous Serrsic profile for the most common values of the Serrsic index n (0.5 < n < 8). The high-level fitting code ProFit is tested on a sample of galaxies with both SDSS and deeper KiDS imaging. We find good agreement in the fit parameters, with larger scatter in best-fit parameters from fitting images from different sources (SDSS vs KiDS) than from using different codes (ProFit vs GALFIT). A large suite of Monte Carlo-simulated images are used to assess prospects for automated bulge-disc decomposition with ProFit on SDSS, KiDS and future LSST imaging. We find that the biggest increases in fit quality come from moving from SDSS- to KiDS-quality data, with less significant gains moving from KiDS to LSST.

We investigate the large scale metallicity distribution in the Galactic bulge, using a large spatial coverage, in order to constrain the bulge formation scenario. We use the VISTA variables in the Via Lactea (VVV) survey data and 2MASS photometry, covering 320 sqdeg of the Galactic bulge, to derive photometric metallicities by interpolating of the (J-Ks)0 colors of individual Red Giant Branch stars based on a set of globular cluster ridge lines. We then use this information to construct the first global metallicity map of the bulge with a resolution of 30'x45'. The metallicity map of the bulge revealed a clear vertical metallicity gradient of ~0.04 dex/deg (~0.28 dex/kpc), with metal-rich stars ([Fe/H]~0) dominating the inner bulge in regions closer to the galactic plane (|b|<5). At larger scale heights, the mean metallicity of the bulge population becomes significantly more metal-poor. This fits in the scenario of a boxy-bulge originated from the vertical inestability of the Galactic bar, formed early via secular evolution of a two component stellar disk. Older, metal-poor stars dominate at higher scale heights due to the non-mixed orbits from the originally hotter thick disk stars.

We use the Vista Variables in the Via Lactea (VVV) ESO public survey data to measure extinction values in the complete area of the Galactic bulge covered by the survey at high resolution. We derive reddening values using the method described in Paper I. This is based on measuring the mean (J-Ks) color of red clump giants in small subfields of 2' to 6' in the following bulge area: -10.3<b<+5.1 and -10<l<+10.4. To determine the reddening values E(J-Ks) for each region, we measure the RC color and compare it to the (J-Ks) color of RC stars measured in Baade's window, for which we adopt E(B-V)=0.55. This allows us to construct a reddening map sensitive to small scale variations minimizing the problems arising from differential extinction. The significant reddening variations are clearly observed on spatial scales as small as 2'. We find a good agreement between our extinction measurements and Schlegel maps in the outer bulge, but, as already stated in the literature the Schlegel maps are not reliable for regions within |b| < 6. In the inner regions we compare our results with maps derived from DENIS and Spitzer surveys. While we find good agreement with other studies in the corresponding overlapping regions, our extinction map has better quality due to both higher resolution and a more complete spatial coverage in the Bulge. We investigate the importance of differential reddening and demonstrate the need for high resolution extinction maps for detailed studies of Bulge stellar populations and structure. The extinction variations on scales of up to 2'-6', must be taken into account when analysing the stellar populations of the Bulge.