We investigate the environment and line of sight of the H0LiCOW lens B1608+656 using Subaru Suprime-Cam and the Hubble Space Telescope (HST) to perform a weak lensing analysis. We compare three different methods to reconstruct the mass map of the field, i.e. the standard Kaiser-Squires inversion coupled with inpainting and Gaussian or wavelet filtering, and $\tt{Glimpse}$ a method based on sparse regularization of the shear field. We find no substantial difference between the 2D mass reconstructions, but we find that the ground-based data is less sensitive to small-scale structures than the space-based observations. Marginalising over the results obtained with all the reconstruction techniques applied to the two available HST filters F606W and F814W, we estimate the external convergence, $\kappa_{\rm ext}$ at the position of B1608+656 is $\kappa_{\rm ext} = 0.11^{+0.06}_{-0.04}$, where the error bars corresponds respectively to the 16th and 84th quartiles. This result is compatible with previous estimates using the number-counts technique, suggesting that B1608+656 resides in an over-dense line of sight, but with a completely different technique. Using our mass reconstructions, we also compare the convergence at the position of several groups of galaxies in the field of B1608+656 with the mass measurements using various analytical mass profiles, and find that the weak lensing results favor truncated halo models.

We present the results of 15 years of monitoring of lensed quasars conducted by the COSMOGRAIL program at the Leonhard Euler 1.2m Swiss Telescope. The decade-long light curves of 23 lensed QSOs are presented for the first time. We complement our data set with other monitoring data available in the literature to measure the time delays in 18 systems, among which 9 reach a relative precision better than 15% for at least one time delay. To achieve this, we develop an automated version of the curve-shifting toolbox PyCS to ensure robust estimation of the time delay in the presence of microlensing while accounting for the errors due to imperfect representation of microlensing. We also reanalyze the previously published time delays of RX J1131$-$1231 and HE 0435$-$1223, adding respectively 6 and 2 new seasons of monitoring and confirming the previous time-delay measurements. When the time delay measurement is possible, we correct the light curves of the lensed images from their time delay and present the difference curves to highlight the microlensing signal contained in the data. This is to date the largest sample of decade-long lens monitoring data, useful to measure $H_0$, to measure the size of quasar accretion disks with microlensing, and to study quasar variability.

We present a measurement of the Hubble constant ($H_{0}$) and other cosmological parameters from a joint analysis of six gravitationally lensed quasars with measured time delays. All lenses except the first are analyzed blindly with respect to the cosmological parameters. In a flat $\Lambda$CDM cosmology, we find $H_{0} = 73.3_{-1.8}^{+1.7}$, a 2.4% precision measurement, in agreement with local measurements of $H_{0}$ from type Ia supernovae calibrated by the distance ladder, but in $3.1\sigma$ tension with $Planck$ observations of the cosmic microwave background (CMB). This method is completely independent of both the supernovae and CMB analyses. A combination of time-delay cosmography and the distance ladder results is in $5.3\sigma$ tension with $Planck$ CMB determinations of $H_{0}$ in flat $\Lambda$CDM. We compute Bayes factors to verify that all lenses give statistically consistent results, showing that we are not underestimating our uncertainties and are able to control our systematics. We explore extensions to flat $\Lambda$CDM using constraints from time-delay cosmography alone, as well as combinations with other cosmological probes, including CMB observations from $Planck$, baryon acoustic oscillations, and type Ia supernovae. Time-delay cosmography improves the precision of the other probes, demonstrating the strong complementarity. Allowing for spatial curvature does not resolve the tension with $Planck$. Using the distance constraints from time-delay cosmography to anchor the type Ia supernova distance scale, we reduce the sensitivity of our $H_0$ inference to cosmological model assumptions. For six different cosmological models, our combined inference on $H_{0}$ ranges from $\sim73$-$78~\mathrm{km~s^{-1}~Mpc^{-1}}$, which is consistent with the local distance ladder constraints.

It has recently been proposed that gravitationally lensed type-Ia supernovae can provide microlensing-free time-delay measurements provided that the measurement is taken during the achromatic expansion phase of the explosion and that color light curves are used rather than single-band light curves. If verified, this would provide both precise and accurate time-delay measurements, making lensed type-Ia supernovae a new golden standard for time-delay cosmography. However, the 3D geometry of the expanding shell can introduce an additional bias that has not yet been fully explored. In this work, we present and discuss the impact of this effect on time-delay cosmography with lensed supernovae and find that on average it leads to a bias of a few tenths of a day for individual lensed systems. This is negligible in view of the cosmological time delays predicted for typical lensed type-Ia supernovae but not for the specific case of the recently discovered type-Ia supernova iPTF16geu, whose time delays are expected to be smaller than a day.

We present a weak gravitational lensing measurement of the external convergence along the line of sight to the quadruply lensed quasar HE$\,$0435$-$1223. Using deep r-band images from Subaru-Suprime-Cam we observe galaxies down to a 3$\sigma$ limiting magnitude of $\sim 26$ mags resulting in a source galaxy density of 14 galaxies / arcmin$^2$ after redshift-based cuts. Using an inpainting technique and Multi-Scale Entropy filtering algorithm, we find that the region in close proximity to the lens has an estimated external convergence of $\kappa=-0.012^{+0.020}_{-0.013}$ and is hence marginally under-dense. We also rule out the presence of any halo with a mass greater than $M_{\rm vir}=1.6\times10^{14}h^{-1}M_\odot$ (68$\%$ confidence limit). Our results, consistent with previous studies of this lens, confirm that the intervening mass along the line of sight to HE$\,$0435$-$1223 does not affect significantly the cosmological results inferred from the time delay measurements of that specific object.

Strong gravitational lens systems with time delays between the multiple images allow measurements of time-delay distances, which are primarily sensitive to the Hubble constant that is key to probing dark energy, neutrino physics, and the spatial curvature of the Universe, as well as discovering new physics. We present H0LiCOW ($H_0$ Lenses in COSMOGRAIL's Wellspring), a program that aims to measure $H_0$ with $<3.5\%$ uncertainty from five lens systems (B1608+656, RXJ1131-1231, HE0435-1223, WFI2033-4723 and HE1104-1805). We have been acquiring (1) time delays through COSMOGRAIL and Very Large Array monitoring, (2) high-resolution Hubble Space Telescope imaging for the lens mass modeling, (3) wide-field imaging and spectroscopy to characterize the lens environment, and (4) moderate-resolution spectroscopy to obtain the stellar velocity dispersion of the lenses for mass modeling. In cosmological models with one-parameter extension to flat $\Lambda$CDM, we expect to measure $H_0$ to $<3.5\%$ in most models, spatial curvature $\Omega_{\rm k}$ to 0.004, $w$ to 0.14, and the effective number of neutrino species to 0.2 (1$\sigma$ uncertainties) when combined with current CMB experiments. These are, respectively, a factor of $\sim15$, $\sim2$, and $\sim1.5$ tighter than CMB alone. Our data set will further enable us to study the stellar initial mass function of the lens galaxies, and the co-evolution of supermassive black holes and their host galaxies. This program will provide a foundation for extracting cosmological distances from the hundreds of time-delay lenses that are expected to be discovered in current and future surveys.

We probe the feasibility of describing the structure of a multi-component axisymmetric galaxy with a dynamical model based on the Jeans equations while taking into account a third integral of motion. We demonstrate that using the third integral in the form derived by G. Kuzmin, it is possible to calculate the stellar kinematics of a galaxy from the Jeans equations by integrating the equations along certain characteristic curves. In cases where the third integral of motion does not describe the system exactly, the derived kinematics would describe the galaxy only approximately. We apply our method to the Andromeda galaxy, for which the mass distribution is relatively firmly known. We are able to reproduce the observed stellar kinematics of the galaxy rather well. The calculated model suggests that the velocity dispersion ratios ${\sigma}_z^2/{\sigma}_R^2$ of M31 decrease with increasing R. Moving away from the galactic plane, ${\sigma}_z^2/{\sigma}_R^2$ remains the same. The velocity dispersions ${\sigma}_{\theta}^2$ and ${\sigma}_R^2$ are roughly equal in the galactic plane.

Stellar mass distribution in M31 is estimated using optical and infrared imaging data. Combining the derived stellar mass model with various kinematical data, properties of the DM halo of the galaxy are constrained. SDSS observations through the ugriz filters and the Spitzer imaging at 3.6 microns are used to sample the SED of the galaxy at each imaging pixel. Intrinsic dust extinction effects are taken into account by using far-infrared observations. Synthetic SEDs created with different stellar population synthesis models are fitted to the observed SEDs, providing estimates for the stellar mass surface density. The stellar mass distribution of the galaxy is described with a 3D model consisting of a nucleus, a bulge, a disc, a young disc and a halo component, each following the Einasto density distribution (relations between different functional forms of the Einasto density distribution are given in App. B). By comparing the stellar mass distribution to the observed rotation curve and kinematics of outer globular clusters and satellite galaxies, the DM halo parameters are estimated. Stellar population synthesis models suggest that M31 is dominated by old stars throughout the galaxy. The total stellar mass is (10-15)10^10Msun, 30% of which is in the bulge and 56% in the disc. None of the tested DM distribution models can be falsified on the basis of the stellar matter distribution and the rotation curve of the galaxy. The virial mass of the DM halo is (0.8-1.1)10^12Msun and the virial radius is 189-213kpc, depending on the DM distribution. The central density of the DM halo is comparable to that of nearby dwarf galaxies, low-surface-brightness galaxies and distant massive disc galaxies, thus the evolution of central DM halo properties seems to be regulated by similar processes for a broad range of halo masses, environments, and cosmological epochs.