A modified version of the folded aplanatic Gregory telescope equipped with a spherical two-lens corrector is proposed for observations requiring a high signal-to-noise ratio. The basic telescope model has an aperture of 400 mm (f/3.0), its field of view is 3.0 degrees, the linear obscuration is 0.12, the distortion is less than 0.5%. The focal surface has a spherical shape; the achieving of a plane field requires an increase in the number of lenses in the corrector. The images of stars in the integrated wavelength range 0.35 - 1.0 mcm are close to the diffraction-limited ones (D_{80} = 5.9 - 8.2 mcm = 1.0 - 1.4 arc seconds). The system is free from direct background illumination; both the lens corrector and the light detector are protected from cosmic particles.

While optical and radio transient surveys have enjoyed a renaissance over the past decade, the dynamic infrared sky remains virtually unexplored. The infrared is a powerful tool for probing transient events in dusty regions that have high optical extinction, and for detecting the coolest of stars that are bright only at these wavelengths. The fundamental roadblocks in studying the infrared time-domain have been the overwhelmingly bright sky background (250 times brighter than optical) and the narrow field-of-view of infrared cameras (largest is 0.6 sq deg). To begin to address these challenges and open a new observational window in the infrared, we present Palomar Gattini-IR: a 25 sq degree, 300mm aperture, infrared telescope at Palomar Observatory that surveys the entire accessible sky (20,000 sq deg) to a depth of 16.4 AB mag (J band, 1.25um) every night. Palomar Gattini-IR is wider in area than every existing infrared camera by more than a factor of 40 and is able to survey large areas of sky multiple times. We anticipate the potential for otherwise infeasible discoveries, including, for example, the elusive electromagnetic counterparts to gravitational wave detections. With dedicated hardware in hand, and a F/1.44 telescope available commercially and cost-effectively, Palomar Gattini-IR will be on-sky in early 2017 and will survey the entire accessible sky every night for two years. Palomar Gattini-IR will pave the way for a dual hemisphere, infrared-optimized, ultra-wide field high cadence machine called Turbo Gattini-IR. To take advantage of the low sky background at 2.5 um, two identical systems will be located at the polar sites of the South Pole, Antarctica and near Eureka on Ellesmere Island, Canada. Turbo Gattini-IR will survey 15,000 sq. degrees to a depth of 20AB, the same depth of the VISTA VHS survey, every 2 hours with a survey efficiency of 97%.

To explore capabilities of moderate-size optical telescopes in surveys, the set of 9 new wide-field designs having apertures up to 1 m is considered. All but one systems have angular field of view in a range 3.5-10 degrees and flat focal surface; the field of the last system is 45 degrees in diameter at the 0.5 m aperture and spherical focal surface. The complete description of the optical layouts is given in the Appendix. Relations between the expected limiting magnitude, survey speed and exposure time allow to choose the system that is most suitable for a particular task of observations. In principle, a single wide-field telescope with the aperture of approximately 1 m can detect objects brighter than 22.5 magnitude over the entire hemisphere within one night, however, the reliability of acquired data can be significantly increased by using a hierarchic observational network comprised of telescopes with optimized parameters.

An all-spherical catadioptic telescope with the angular field of view of several tens of degrees in diameter and spherical focal surface is proposed for the monitoring of large sky areas. We provide a few examples of such a system with the apertures up to 800 mm and the field of view $30^\circ$ and $40^\circ$ in diameter. The curvature of the focal surface is repaid by high performance of the telescope. In particular, the diameter of a circle, that includes 80% of energy in the polychromatic image of a star, is in the range $1.4'' - 1.9''$ across the field of $30^\circ$ size and $2.2'' - 2.9''$ for the field of $40^\circ$ size. Some ways of working with curved focal surfaces are discussed.

An all-spherical catadioptic system made of glass of one type is proposed for the monitoring of large sky areas. We provide an example of such a system with the aperture of diameter 400 mm and the curved field of 30 degree in diameter.

A compensator (null-corrector) for testing aspheric optical surfaces is proposed, which enables i) independent verification of optical elements and assembling of the compensator itself, and ii) ascertaining the compensator position in a control layout for a specified aspheric surface. The compensator consists of three spherical lenses made of the same glass. In this paper, the scope of the compensator expanded to a surface speed ~f/2.3; a conceptual example for a nominal primary of Hubble Space Telescope is given. The autocollimating design allows significant reducing difficulties associated with practical use of lens compensators.

Two versions of a fast, purely reflective Paul-Baker type telescope are discussed, each with an 8.4-m aperture, 3 deg diameter flat field and f/1.25 focal ratio. The first version is based on a common, even asphere type of surface with zero conic constant. The primary and tertiary mirrors are 6th order aspheres, while the secondary mirror is an 8th order asphere (referred to here for brevity, as the 6/8/6 configuration). The D_80 diameter of a star image varies from 0''.18 on the optical axis up to 0''.27 at the edge of the field (9.3-13.5 mcm). The second version of the telescope is based on a polysag surface type which uses a polynomial expansion in the sag z, r^2 = 2R_0z - (1+b)z^2 + a_3 z^3 + a_4 z^4 + ... + a_N z^N, instead of the common form of an aspheric surface. This approach results in somewhat better images, with D_80 ranging from 0''.16 to 0''.23, using a lower-order 3/4/3 combination of powers for the mirror surfaces. An additional example with 3.5-m aperture, 3.5 deg diameter flat field, and f/1.25 focal ratio featuring near-diffraction-limited image quality is also presented.

Two all-spherical catadioptric optical systems with a Mangin mirror are described. The design A (aperture 500 mm, f/2.0) has flat field of view of 7 deg in diameter; the design B (aperture 1000 mm, f/1.7) has 10-deg flat field. Both designs show near-diffraction-limited images. The D_80 diameter for the design A in the integral waveband 0.45-0.85 mcm varies from 1''.3 on the optical axis up to 2''.2 at the edge of the field (6.2-10.7 mcm); the corresponding range of the D_80 diameter for the design B is 1''.5-1''.9 (12.4-16.2 mcm). The designs include simple glass types, mainly Schott N-BK7 and fused silica. In case of need, better images could be attained by a choice of other glass, aspherisation of some surfaces, etc.

A form of prime focus corrector for the Gregory system is proposed that provides the sub-arcsecond field of view up to 3 degrees in diameter for the spectral range 0.35-0.90 microns. The corrector includes five lenses made of same glass (fused silica is preferable). The distinctive feature of the corrector consists in dissimilar use of the central and edge zones of a front lens disposed in the exit pupil of a two-mirror system. As an example, the f/1.9 telescope is considered with the 6.5-m aperture and the total length 8.8~m. Its primary and secondary mirrors are pure ellipsoids close to concave paraboloid and concave sphere, respectively. In the basic configuration, all surfaces of the corrector are spherical. The diameter of a star image D_{80} varies from 0''.25 on the optical axis up to 0''.50 at the edge of the 2.3-deg field. Only slightly worse images shows spherical corrector for the 2.4-deg field of view. The fraction of vignetted rays grows on 1.7% from the center of field to its edges. Aspherization of some lens surfaces allows to reach sub-arcsecond images in the field of 3.0 in diameter.

It is shown that the theory of aplanatic two-mirror telescopes developed by Karl Schwarzschild in 1905 leads to the unified description both the prefocal and the postfocal systems. The class of surfaces in the ZEMAX optical program has been properly extended to ascertain the image quality in exact Schwarzschild aplanats. A comparison of Schwarzschild aplanats with approximate Ritchey-Chretien and Gregory-Maksutov aplanatic telescopes reveals a noticeable advantage of the former at fast focal ratio of the system.

We propose a form of a lens corrector at the prime focus of a hyperboloidal mirror that provides a flat field of view up to 3 deg diameter at image quality D_{80} < 0.8 arcsec in integrated (0.32-1.10 mcm) light. The corrector consists of five lenses made of fused silica. Only spherical surfaces are used, so the system is capable of achieving better images, if necessary, by aspherizing the surfaces. The optical system of the corrector is stable in the sense that its principal features are retained when optimized after significant perturbations of its parameters. As an example, three versions of the corrector are designed for the V.M.Blanco 4-m telescope at Cerro Tololo Inter-American Observatory with 2.12 deg, 2.4 deg, and 3.0 deg fields of view.